I875 P and IDE

Hello,
I have some problems with installation of MSI 875 P Neo FIS2R
My configuration includes two SATA Maxtor and I want to copy the data from one IDE drive.
Can I put the IDE drive in IDE3 (IDE 1 is used by MSI CDRW and DVD) and there is not a lot of space for IDE2.
Do I have to set this IDE drive into master or slave mode ?
Do I have to put it in the middle or in the end of the IDE cable. ?
Thanks.
Note :
Bios release : 1.2 04/23/2003 A6758
Fast track 378 – Bios Version 1.00 0.27
Pentium 2.8
MSI i875P NEO
MSI 4200 VIVO
2 SATA MAXTOR

I have a single Maxtor 6Y120M0 SATA on the first SATA channel. A DVD ROM & a CDRW on the IDE and 2 Maxtor 6Y120P0 ATA133 disks running (at the moment) on the intel chipset with the USE AS RAID option set to off in the BIOS. The Disks are running fine. I have cpu cooling worries but the disks are great!
I wonder if putting the disks in the Promise controller would improve things as it is, like the Maxtors, ATA133 and the intel Southbridge is only ATA100!
AND
If the Promise is on the PCI bus and the intel is not will this affect things?
The BIOS IDE settings are labyrinthine, inscrutable and downright confusing and I am still not sure if I have it all correct! I generally just buggered around the options untill the disks all showed up and the SATA showed up inthe boot options!

Similar Messages

I have 1428 songs in my itunes library and when i sync to my new iphone it only comes up with 1315 songs have tryed lots of ways but cant seem to get the other remaining songs to it ?? and ideas pls ?

hello need help pls bought a 4s and trasferd all my things across including my music but i am missing around 170 songs that wont snyc across ? have tryed taking all songs off and a few other things it seems to be songs that have been in playlists that wint work ? and ideas< cheers

To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
Delete the "songs" that do not play in your iTunes library and reimport them.

I cannot see my Iphone 4 in my device window in the finder anymore. It use to appear so I could copy the camera pictures off of it and transfer them to other folders. Does anyone have and idea how to get it back when you plug it in initially. Thanks

I cannot see my Iphone 4 in my device window in the finder anymore. It use to appear so I could copy the camera pictures off of it and transfer them to other folders. Does anyone have and idea how to get it back when you plug it in initially. Thanks

You will want to open iPhoto, go to the iPhoto menu and select Preferences. Under the General tab, next to Connecting camera opens: select iPhoto. Close the preferences and quit iPhoto. Reconnect your iPhone 4. iPhoto should open automatically and offer to import your pictures. Import them and then do what you want with them.
Best of luck.

My IPAD went blank and won't restart...and ideas?

My IPAD went blank and won't restart...and ideas?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

HT3918 I upgraded to 16 mb of ram and after 10 minutes my computer freezes, and ideas?

I upgraded to 16 mb of ram and after 10 minutes my computer freezes, and ideas? I have an imac mid 2011 21 inch.

Cause and effect points to out-of-spec memory.
Run Apple Hardware Test. Run the extended tests.
Using Apple Hardware Test
http://support.apple.com/kb/HT1509
If it fails the memory tests, remove the memory and re-seat it. The sockets are very "tight". Run AHT again.
If it still fails, replace your original memory. If it works, you found the problem. Buy Mac memory from Crucial or OWC / MacSales.

Recently my iPhone 4s receives "phantom" SMS messages with the sender "unkown" dated 1/1/70. I delete the MSG and it appears again, and idea how to permantely delete them? I have reset my phone also.

Recently my iPhone 4s receives "phantom" SMS messages with the sender "unkown" dated 1/1/70. I delete the MSG and it appears again, and idea how to permantely delete them? I have reset my phone also. Haven't done a hard reset.

Same issue with my girlfriend's iPhone 4.
I also started a thread at https://discussions.apple.com/thread/3611603
if you find any solution yourself let me know and ill do the same

Error when installing Ecc5.0 and IDES Ecc5.0

Hi all,
I tried to install Ecc5.0 and IDES ECC5.0 on same server( windows 2003,and Oracle9i),but when installing ECC5.0 after successfully install IDES Ecc5.0,used following two cases, there are errors.
Case one:
install IDES and ECC on different SAP system:
step one: instlling a Non-Unicode SAP Ecc 5.0 SR1 ABAP system --> installs central instance on both systems, T13 and T14, from DVD 51031149
Step two: instlling a Non-Unicode SAP Ecc 5.0 SR1 ABAP system --> installs database instance on T13, select IDES export DVDs(DVD 51031332) during the installation process, installation successfully.
Step 3: instlling a Non-Unicode SAP Ecc 5.0 SR1 ABAP system --> installs database instance on T14, select ERP 2004 export DVDs(DVD 51031867) during the installation process, there is error when installation went to Oracle database Load with something like name alreay in the database.
Case two:install IDES and ECC on same SAP system:
Base on the above error, I tried to install ECC database instance on T13 again with diffrent Schema ID from IEDS database instance.
still there is an error like "connect with sql failed, error # 257".
Could any one help me?
I ever successfully installed ECC5.0 without IDES

Pls let us know that could you able to install ECC5 IDES, if yes pls give EXPORT material no.
Thanks
Vijay

TS3367 My partner has the Iphone 5 and I am using a MacBook with version 1.0.2. When using the face time app to call him he says that cam freezes and he is unable to hear me. Any ideas of the problem and and ideas for resolving the issue?

My partner has the Iphone 5 and I am using a MacBook with version 1.0.2. When using the face time app to call him he says that cam freezes and he is unable to hear me. Any ideas of the problem and and ideas for resolving the issue?

Had the same problem, the only fault and the reason why it happend is a bad wifi connection!
Could ofc be something else, but thats my two cents!

Suggestions and ideas very needed..

Hi..
I really need to spice up some of my edting and want to know if presets and actions are worth buying and where I can find them. However, if you have any other ideas please let me know...all feedback and ideas are welcomed!

Photoshop out of the box is capable of doing just about anything in terms of image editing without any 3rd party additions.
Presets and actions can be created by the user according to the type of work they are engaged in.

Why aren't working vodafone and idea networks in india mobiles

india iphone mobiles are vodafone and idea networks are signal droped sometimes.

Well you need to ask this question to those carriers.

P35 Neo2 BIOS Settings to run Dual Boot SATA and IDE HD's

Hi,
I was having intermittent problems with a Gigeabyte so upgraded M/B.
I have an IDE "caddy" with 2 Dual boot HD's (Linux Grub booting XP on sda1 and Fedora9 on sda2), and had no problems with either HD's on old M/B.
The old M/B also had SATA sockets which I installed a 250GB drive as my main setup. Dual boot again with same setup. I set the SATA to "auto" and it detected and ran when no IDE caddy was inserted.
Everything ran OK but I had very intermittent CRC failures that I could not isolate, so I upgrade 2 days ago.
Without inserting any IDE drives I can boot the SATA drive OK into Linux OK (it also detects an ext3 partition on a seperate /backup partition so the IDE interface works).
If I now try and boot the XP on my SATA drive, I get the dreaded blue screen.
I assume this is due to me having XP installed without the AHCI support as detailed in other (long) thread showing how to overcome this problem!?
I would also like to know if and I can just boot from my IDE drive (with no SATA's connected), because even though it seems to detect the PATA HD OK, I cannot get it to boot from either of them! I know these HD's have not changed as I have checked both of them on the SATA OS and both Logical volumes are still there and the relevant boot flags are both set.
Even though I have a bit of a complex setup, this may well be a very simple case of BIOS settings (sorry).
FYI:
I have a A7345 IMS V1.8 012408 BIOS and my two IDE drives are both dual boot with XP on the first partition.
Both Linux partitions are formatted using Logical Volume Management (LVM).
Thanks for your time
Any help/pointers would be appreciated as I am not absolutely sure that the M/B is functional or not.

Thanks for the info, I am now a bit clearer as to what is happening!
I removed known good IDE HD from caddie and put it directly on the IDE cable (after removing the old non LVM linux IDE disk that was on it).
The newly connected HD was initialized OK and I can see both SAT and IDE disks listed with F11.
On trying to boot from the IDE, it starts up and decompresses the image, BUT cannot seem to find the LVM Volume group 03 (which is where my /boot partition is located).
It then gives in and after a while, boots back to the SATA OK (where the bootloader is also inside the LVM so I can't see why the LVM IDE disk is a problem but the LVM SATA boots OK).
I do remember (late last night) trying with just IDE drive and of course it just hung because it did not have any alternative to boot!
Any other observations/suggestions?
Apologies its late here and I will not be back for a few hours!
Regards

Difference betwwen sandbox and IDES

HI all,
Can Anybody please tell me whait s the difference betwwen sandbox and IDES.
Please use the subject effectively
Edited by: Lakshmipathi on Sep 1, 2009 6:46 PM

Hi Radheshyam,
Landscape is like a server system or like a layout of the servers or some may even call it the architecture of the servers viz. SAP is divided into three different lanscape DEV, QAS and PROD.
- DEV would have multiple clients for ex: 190- Sandbox, 100- Golden, 180- Unit Test.
- QAS may again have mutiple clients for ex: 300- Integration Test, 700 to 710 Training.
- PROD may have something like a 200 Production.
These names and numbers are the implementer's discreet on how they want it or they have been using in their previous implementations or how is the client's business scenario.
Now whatever you do in the Sandbox doesn't affect the other servers or clients. Whenever you think you are satisfied with your configuration and you think you can use it moving forward, you RE-DO it in the golden client (remember, this is a very neat and clean client and you cannot use it for rough usage). As you re-do everything that you had thought was important and usable, you get a transport request pop up upon saving everytime. You save it under a transport request and give your description to it. Thus the configuration is transported to the Unit Test client (180 in this example).
You don't run any transaction or even use the SAP Easy Access screen on the 100 (golden) client. This is a configuration only client. Now upon a successful tranport by the Basis guy, you have all the configuration in the Testing client, just as it is in the Golden client. The configuration remains in sync between these two clients.
But in the Testing client you can not even access SPRO (Display IMG) screen. It's a transaction only client where you perform the unit test. Upon a satisfactory unit test, you move the good configuration to the next SERVER (DEV). The incorrect or unsatisfactory configuration is corrected in Golden (may again as well be practised in the sandbox prior to Golden) and accordingly transported back to 180 (Unit Test) until the unit test affected by that particular config is satisfactory.
The Golden client remains the 'database' (if you wanna call it that) or you may rather call it the 'ultimate' reference client for all the good, complete and final configuration that is being used in the implementation.
In summary:
Landscape : is the arrangement for the servers
IDES : is purely for education purpose and is NOT INCLUDED in the landscape.
DEVELOPMENT ---> QUALITY -
> PRODUCTION
DEVELOPMENT : is where the the consultants do the customization as per the company's requirement.
QUALITY : is where the core team members and other members test the customization.
PRODUCTION : is where the live data of the company is recorded.
A request will flow from Dev->Qual->Prod and not backwards.
1. Sandbox server: In the initial stages of any implementation project, You are given a sandbox server where you do all the configuration/customization as per the companies business process.
2. Development Server: - Once the BBP gets signed off, the configuration is done is development server and saved in workbench requests, to be transported to Production server.
3. Production Server: This is the last/ most refined client where the user will work after project GO LIVE. Any changes/ new develpoment is done is development client and the request is transported to production.
These three are landscape of any Company. They organised their office in these three way. Developer develop their program in Development server and then transport it to test server. In testing server tester check/test the program and then transport it to Production Server. Later it will deploy to client from production server.
Presentaion Server- Where SAP GUI have.
Application Server - Where SAP Installed.
Database Server - Where Database installed.
What is the meaning of "R" in R/3 systems?
R/3 stands for realtime three tier architecture. This is the kind of architrecture SAP R/3 system has.
R/3 means three layers are installed in Different system/server and they are connected with each other.
1) Presentation
2) Application
3) Database
Why do we call client 000 as golden client?
Golden client contains all the configuration data and master data so some extent. All the configuration settings are done in golden clients and then moved to other clients. Hence this client acts as a master record for all transaction settings, hence the name "Golden Client".
Thanks,
Swamy H P

Templating and IDE

Hello, I am trying to use templating following the Flex 3 doc here: http://livedocs.adobe.com/flex/3/html/help.html?content=templating_3.html It works when I run the program, but on Flex IDE 3, the visual designer view doesn't show any control I added in MyComp:MyTemplateComponent! In the flowing example, the <mx:TextArea> and <mx:LinkButton> are not visible in the designer: <?xml version="1.0"?>  <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:MyComp="myComponents.*" height="700" width="700"> <mx:Panel paddingTop="10" paddingBottom="10" paddingRight="10" paddingLeft="10"> <MyComp:MyTemplateComponent id="myTComp2"> <MyComp:topRow> <mx:TextArea text="top component"/> </MyComp:topRow> <MyComp:bottomRow> <mx:LinkButton label="Link 1"/> <mx:LinkButton label="Link 2"/> <mx:LinkButton label="Link 3"/> </MyComp:bottomRow> </MyComp:MyTemplateComponent> </mx:Panel> </mx:Application> Did I do something wrong or is this a IDE bug ? Thanks, -toni

It's possible Design View doesn't know how to support this sort of thing. DV does interpretation more than anything else. Feel free to file a bug against Flex Builder. Matt On 8/11/08 1:43 AM, "aparolini" <[email protected]> wrote: A new discussion was started by aparolini in Developers -- Templating and IDE Hello, I am trying to use templating following the Flex 3 doc here: http://livedocs.adobe.com/flex/3/html/help.html?content=templating_3.html It works when I run the program, but on Flex IDE 3, the visual designer view doesn't show any control I added in MyComp:MyTemplateComponent! In the flowing example, the <mx:TextArea> and <mx:LinkButton> are not visible in the designer: <?xml version="1.0"?> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:MyComp="myComponents.*" height="700" width="700"> <mx:Panel paddingTop="10" paddingBottom="10" paddingRight="10" paddingLeft="10"> <MyComp:MyTemplateComponent id="myTComp2"> <MyComp:topRow> <mx:TextArea text="top component"/> </MyComp:topRow> <MyComp:bottomRow> <mx:LinkButton label="Link 1"/> <mx:LinkButton label="Link 2"/> <mx:LinkButton label="Link 3"/> </MyComp:bottomRow> </MyComp:MyTemplateComponent> </mx:Panel> </mx:Application> Did I do something wrong or is this a IDE bug ? Thanks, -toni ________________________________ View/reply at Templating and IDE <a href=http://www.adobeforums.com/webx?13@@.59b62175> Replies by email are OK. Use the unsubscribe <a href=http://www.adobeforums.com/webx?280@@.59b62175!folder=.3c060fa3> form to cancel your email subscription.

Ecc and ides?

what is the full form of ecc and ides?..what is the difference ?how can i get it installed in my pc.?i am new into sap mm..

Hi,
SAP ERP is the application in which ECC is one of the installable unit of. ECC means ERP Central Components. It is basically what was included in the SAP R/3 4.7 with additional new functionality.
- ECC 5.0 is part of SAP ERP 2004
- ECC 6.0 is part of SAP ERP 6.0 (previously called 2005)
More information can be found at http://service.sap.com/ERP and http://service.sap.com/instguides (navigate to the SAP ERP master guide).
IDES is the name given to a learning systems provided by SAP. It means "International Demo and Education System". These systems include sample data, configurations and step-by-step guides for learning and demoing to business users. There are IDES versions for most SAP applications like SAP ERP, SAP CRM and SAP NetWeaver.
IDES applications are available for customers who have the applicable application license (SAP ERP customer can order SAP ERP IDES free of charge).
more information can be found at http://service.sap.com/IDES.
You can install most SAP applications on a super-sized PC if you down-tune the applications. As you mention Material Management (MM) the best option is probably to get your company to order and install SAP ERP IDES for you to learn on. Install of SAP applications requires a lot of SAP technical knowledge.
I hope this helps,
Mike.

Neo4 Dual Drive ATA and IDE boot from ATA?

I just set up a Neo4 board using two drives. A seagate 120Gg ATA drive and a Maxtor 200Gb IDE drive. I would like to use the ATA drive as the boot drive but I can only seem to startup from the IDE drive. Is there a trick to get this working?

Quote from: Richard on 28-September-05, 01:07:15
ATA and IDE are the same thing.
Huh. Well. Okay, perhaps I'm not posing the question properly. The seagate drive is plugged into the SATA1 position, while the Maxtor is plugged into IDE1. They use different cables and connectors which is where my confusion started I guess. In the BIOS when I select the seagate drive to boot from it will not boot. But it does off the Maxtor. I have no reason to believe the drive is bad but hwo knows. I guess I just want to make sure I'm not missing some setting to properly boot from the SATA1 position when both drives are attached.

I875 P and IDE

Similar Messages

Maybe you are looking for