IAb of iAS 6.0 sp2 cannt be start on Intel P4 platform!

i have installed the IWS4.1 in winNT4.0 , updated the JVM to 1.2.2_10 version, IWS 4.1 can be started.
but when i finished to install the iAS 6.0 sp2, the iAb cannt be started.
any ideas will be appreciated.

I gotta admit, I'm a bit ashamed right now.
Thank you, Mr. Gimbel. The problem was indeed an incorrect password. While we did indeed enter the new password into the PSE, we did not delete the entries first. Instead we simply tried to update the keytab entries with sappsegen -p SAPSNCSKERB.pse -nopsegen -a [email protected]
Should anyone find this post: Delete the keytab entries before entering an entry with an updated password.

Similar Messages

IAS 6.0 SP2 - IPS 3.0 SP2 integration

Hi
I am faced with a problem related to IAS 6.0 SP2 and iPlanet Portal
Server 3.0 SP2. I have deployed the beans on IAS and can access it from
a rich client.
I've servlets running in IPS and from these, I want to access the beans
on IAS. I'm getting an unsatisfied link error. Theexception thrown is as
follows :
03/Jul/2001:14:37:02] info (15110): PortalInterface: init
[03/Jul/2001:14:37:09] failure (15110): Internal error: exception thrown
from the servlet service function (uri=/PortalInterface):
java.lang.UnsatisfiedLinkError: specialLoadClass, Stack:
java.lang.UnsatisfiedLinkError: specialLoadClass
at
com.sun.corba.ee.internal.util.JDKClassLoader.loadClass(JDKClassLoader.java:58)
at
com.sun.corba.ee.internal.util.JDKBridge.loadClassM(JDKBridge.java:180)
at
com.sun.corba.ee.internal.util.JDKBridge.loadClass(JDKBridge.java:83)
at javax.rmi.CORBA.Util.loadClass(Util.java:215)
at javax.rmi.CORBA.Util.createDelegateIfSpecified(Util.java:306)
at <Unloaded Method>
at
javax.rmi.PortableRemoteObject.createDelegateIfSpecified(PortableRemoteObject.java:182)
at <Unloaded Method>
at
com.iplanet.portalserver.api.SabreFlightDetails.getPriceAvailabilityInfo(Compiled
Code)
at
com.iplanet.portalserver.api.SabreFlightDetails.getSabreFlights(SabreFlightDetails.java:74)
at com.iplanet.portalserver.api.PortalInterface.doPost(Compiled
Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at
com.netscape.server.http.servlet.NSServletRunner.Service(Compiled Code)
I've set classpaths for the rich client in kjs and also in jvm12.conf of
IPS 3.0. But going by the rich client examples given with IAS, like the
converter client example, we have to set
a LD_LIBRARY_PATH as in runclient.sh. There is no place in IPS where we
can set the LD_LIBRARY_PATH. Is that the reason ?
I would appreciate your thoughts on this issue.
Thanks
Partha

One work around for this is to have only one copy in the system class path and have it loaded one only once and one copy. Then both the applications A and B can have access to this library, with out any ambiguity.
So, put the library in the application server's system class path.
I am little confused with your statements in 4th and 5th paragraphs, that shared library has been modified and packed in Application B and then deployed. So, you have two libraries alomost the same in Application A as well as Application B.
According to my understanding, since the library in App B is superset to the library (shared library??, as you call. Is this really a shared library now?) in Application A, we can only have one only one library in the Application Server System class path. Am I correct?
If this answer does not answer your question accurately, please get back. And please let me know about the answer.
Rakesh.

Is it possible to install Two iAS 6.5 SP2 instances on a single solaris box

Hi,
I have iPlanet Application server 6.0 SP2 installed on sun solaris 2.7.
Now, I want to install one more instance of iAS (same version) on the same solaris box. Just wondering, is it possible, because i think in case of Sun One Apps Server 7 its not possible.
If its possible, is there any specific configuration I have to make ?
Thanks in advance,
Prakash

Hello,
I think it is possible to have two instances of IAS 6.5 on one machine because last year I had similar situation with IAS 6.5 Enterprise - I instaled it twice and put them in cluster. Things were just fine.
Each creation of instance of app server meant new installation of IAS software in different install folder, where second one used Directory Server installed durring the first installation.
I remember that I had only one Directory Server installation where each IAS instance had its own space for configuration data (by specifying diferent name for "IAS global config params" during the installation) and different set of port numbers for IAS processes. Finnaly, I put these two instances in a cluster...
IAS 7.0 (Sun One App server 7.0) has different approach regarding creating and configuring several app server instances, because creating one more instance of app server doesn't mean another installation of software...
Regards
Vladimir

Random SP2 error when starting oracle process through SHELL script

Hi All,
I am trying to process data in n-Number of tables through a package. The package is called through a shell script to create start data processing. All calls to the package are in a sql script which is basically exec calls-
exec package.process ('T1','some param');
exec package.process ('T1','some param');
exec package.process ('T..n','some param');
I have a shell script which I use to execute commands from the sql script. There is a reason behind using shell script. For some strange reason, I keep on getting -
ERROR: logon denied - check for valid user with valid privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SP2-0640: Not connected
for some EXEC calls. Problem is, errors are generated at random. So in one run, I get error for T10,T11 and then in next run I might get for some other tables.
However, when I am running the sql script from the sql prompt, all calls to the package are executed without any problem.
This makes me think, it is something to do with the way database connection being initiated through UNIX.
Has anyone faced similar issue? Your help/gudence is much appreciated.
DB: Oracle 10.2.0.5
OS: SUN Solaris 10
Thanks in advance.

Login credentials are provided inside the shell script.
I did put a sleep(10) after EOF but no help. As mentioned if I run script file from sql promt, it runs without any hiccup. So it is the connection through the UNIX that is causing issue.
As pointed out by Sybrand, I agree that it does not make a sense to connect and commit after every sql statement. So decided to change the shell script and so far, the result from my initial tests on a sample data is quite encouraging. Hopefully I will have a solution.
But it will be nice to know why SHELL is doing what it is doing!!
Legacy prog are sometime big time eye-openers..;)

SP2-1503 when starting sqlplus (privilege problem)

System: windows 2003 terminal server
Oracle db: 10gr2
After i installing the database everything works perfect as administrator user, but when i start sqlplus as a "normal" user without administrator rights, the following error message apears:
SP2-1503: Oracle aanroepinterface kan niet
SP2-0152: ORACLE functioneert mogelijk niet
Please help...

Hi,
We had this issue on one of our 11.1.0.6 database running on IBM AIX whereby no oracle user was trying to access the database. We followed the metalink note 417067.1 to resolve it.
For those who don't have access to metalink, this is the solution from the note that worked for us:
To implement the solution, please execute the following steps:
1. Manually change the privileges for the $ORACLE_HOME/oracore/zoneinfo directory and files.
chmod o+r oracore
chmod o+r oracore/zoneinfo/timezone.dat
or just type from $ORACLE_HOME directory:
2. SQL*Plus should be working now.
$sqlplus usr/password@dbalias
See if that helps.
Pranilesh Chand

EP6.0 SP2: Error while starting Testclient

Hi,
i tried to start the testclient from the Java Development -> Component Starter -> com.sap.portal.pdk.srv.connectorframework.
But i get this Error.
>Portal Runtime Error
>
>An exception occurred while processing a request for :
>iView : N/A
>Component Name : N/A
>
>iView not found: >com.sap.portal.connectors.testwebservice.TestClient.
>Exception id: 10:28_26/08/04_0001
>See the details for the exception ID in the log file
Has anybody an answer, while this iView is not found?
Stephan Borchert

Try firstly to see if in the code sample the name TestClient is equal to the XML file.
2nd u should also check if the path in the XML its pointing to the package where u have TestClient
oh.. one more thing:
In the XML file try to check this:
<application>
<application-config>
    <property name="startup" value="true"/>
    <property name="SharingReference" value="htmlb,com.sap.portal.ivs.connectorservice,landscape,urlgenerator,com.sap.km.cm"/>
     <property name="releasable" value="false"/>
</application-config>
<components>
in this case try to see if it was com.sap.portal.ivs.connectorservice, so that it can run
i hope it helps

Add Mouse - Cannt move start point

Captivate v5.5
A work colleague using v5.5 is unable to move the start point of the mouse pointer trail they add to a slide using Insert/Standard Object/Mouse or the insert mouse tool bar.
They can move the pointer end to place they want it to finish but unable to grab and drop the start point and place it where they want the mouse to start from.
I have tried it on my v5.5 and it works OK for me.
Any ideas please as to what she needs to do - or why this might be ?
Noel

Hi Noel,
If you are using mouse pointers in more that one slide, then the end point of the mouse pointer on the first slide, becomes the start point on the second and so on.
This is done to keep the continuation of the mouse pointer across the slides.

Error sp2-0224 - invalid starting line number

I am getting this error while running a sql script. Couldnt find the message in the server Messages. where would the online docs for this be located
set linesize 200;
set pagesize 1000;
del host z:\ariba-files\sql\missinganids\linkdblog.txt;
SPOOL Z:\ariba-files\sql\missinganids\linkdblog.txt;
col id format 99999;
col organid format a15;
col exchangeanid format a15;
col orgname format a30;
col exchangename format a30;
COLUMN an_id FORMAT A15;
COLUMN exchange_org FORMAT 999999;
COLUMN name FORMAT A25;
set escape on;
select unique s.anid organid, s.id, s.name orgname, p.anid exchangeanid, p.name exchangename from or
g@an s, org@an p, ix_exchangeorg e, ix_org o where o.an_id is NULL AND o.exchange_org = e.id AND s.
name = o.name AND s.parent = p.id AND p.anid = e.an_id order by e.an_id, o.exchange_org;
set escape off;
SPOOL off;

If you are shelling out to the OS, then:
del host z:\ariba-files\sql\missinganids\linkdblog.txt;
SHOULD BE
host del z:\ariba-files\sql\missinganids\linkdblog.txt;

Iplanet webserver6.0 SP2 Doesn't start...

I cann't get my iplanet admin server started... when I do startconsole from command line, message says the deamon started and ready for communication, but I couldn't access it thru web...
here is the error message from admin server log file..
[11/Feb/2002:18:32:58] info (11106): successful server startup
[11/Feb/2002:18:32:58] info (11106): iPlanet-WebServer-Enterprise/6.0SP2 B11/13/2001 00:49
[11/Feb/2002:18:32:59] info (11107): Installing a new configuration
[11/Feb/2002:18:32:59] info (11107): [LS ls1] http://jupiter, port 8888 ready to accept requests
[11/Feb/2002:18:32:59] info (11107): A new configuration was successfully installed
[11/Feb/2002:18:33:00] info (11107): Using the Java HotSpot(TM) Client VM v1.3.1 from Sun Microsystems Inc.
[11/Feb/2002:18:33:00] info (11107): Java VM classpath: /opt/iplanet/servers/plugins/servlets/examples/legacy/beans.10/SDKBeans10.jar:/opt/iplanet/servers/bin/https/jar/NSServletLayer.jar:/opt/iplanet/servers/bin/https/jar/NSJavaUtil.jar:/opt/iplanet/servers/bin/https/jar/NSJavaMiscUtil.jar:/opt/iplanet/servers/bin/https/jar/servlet.jar:/opt/iplanet/servers/bin/https/jar/servlet-2.3-filters-api.jar:/opt/iplanet/servers/bin/https/jar/jsp092.jar:/opt/iplanet/servers/bin/https/jar/jaxp.jar:/opt/iplanet/servers/bin/https/jar/crimson.jar:/opt/iplanet/servers/bin/https/jar/xalan.jar:/opt/iplanet/servers/bin/https/jar/jspengine.jar:
[11/Feb/2002:18:33:00] failure (11107): Internal error: Unable to create Java object: com/iplanet/server/http/servlet/NSServletRunner
[11/Feb/2002:18:33:00] failure (11107): Internal error: Unexpected error condition thrown (unknown exception,no description), stack: java.lang.UnsatisfiedLinkError: no NSJavaMiscUtil in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at com.iplanet.server.http.util.misc.EnvUtil.<clinit>(EnvUtil.java:10)
at com.iplanet.server.http.servlet.NSServletAdmin$ContextEntry.<init>(NSServletAdmin.java:940)
at com.iplanet.server.http.servlet.NSServletAdmin.<init>(NSServletAdmin.java:233)
at com.iplanet.server.http.servlet.NSServletRunner.<init>(NSServletRunner.java:91)
[11/Feb/2002:18:33:00] failure (11107): Late initialization failed: Error running init function(late) NSServletLateInit: unknown error
I have installed Iplanet6.0sp2 on solaris 8(JDK1.3.1) and Iam running admin server under root.
Any Help is Appreciated
Raj

Hi,
Did you installed iWS6.0sp2 recently. If it's so have you given (JDK path,JDK lib path,JDK classpath) while installation. Please remove JDK path in admin server and try to start the server.
OR
1. Try to do fresh installation at the time don't give your jdk path(while installation).
2. Start the Admin server & try to hit admin page.
3. Now configure JDK & start the iWS. i hope now you will able to hit the admin page.
Still, you face problem let me know the output of below.
#/<server root>/https-admserv/start -configtest
#/<server root>/https-admserv/start -e
Thanks,
Daks.

Problem stop and start the ias 6.0

Hi all,
i have a problem when i stop and start the ias 6.0 sp2. The problem
apparent is that when i stop the ias the IAS web connector plugin stop,
then i start the ias and when i try to connect to a servlet in my ias
the page i find in my brwser tell me "The documento contained no
data.Try later again ..". Afte this i see that the IAS web plugin begin
to start and then the same connect to the servlet works.
Somebody can help me.
Thanks in advance.
Ignacio Ramos Garcia
Division TSO
Area de Telecomunicaciones
Tecsidel
C/ Enrique Jardiel Poncela, 6
28016 Madrid
Tel: (+34) 91 353 08 19
Fax: (+34) 91 353 08 81
<mailto:[email protected]>
www.tecsidel.es

Hi,
This really looks like a problem, kindly let me know the following...
- The O/S version & the web server with the service pack
- What method are you using to start & stop the application & web
server ?
- What application are you invoking to see this error ?
Regards
Raj
Ignacio Ramos Garcia wrote:
Hi all,
i have a problem when i stop and start the ias 6.0 sp2. The problem
apparent is that when i stop the ias the IAS web connector plugin stop,
then i start the ias and when i try to connect to a servlet in my ias
the page i find in my brwser tell me "The documento contained no
data.Try later again ..". Afte this i see that the IAS web plugin begin
to start and then the same connect to the servlet works.
Somebody can help me.
Thanks in advance.
Ignacio Ramos Garcia
Division TSO
Area de Telecomunicaciones
Tecsidel
C/ Enrique Jardiel Poncela, 6
28016 Madrid
Tel: (+34) 91 353 08 19
Fax: (+34) 91 353 08 81
<mailto:[email protected]>
www.tecsidel.es

Is IAS 6.5 compatible with IBM z/OS 1.4

I am currently running IAS 6.5 SP2 on Solaris that is using the CICS Connector to communicate with CICS v1.3 on an IBM mainframe. We are upgrading from IBM OS/390 to IBM z/OS 1.4. Are there any compatibility issues?

the docs says that it supports the following :
Supported Versions of CICS
The iPlanet Application Server Enterprise Connector for CICS supports IBM CICS running on OS/390. The required releases are MVS 5.2.2 and CICS ESA 4.1 and above with current APARS. iPlanet Application Server Enterprise Connector for CICS includes installation and
configuration for both TCP/IP and SNA (APPC) protocols.
Check with their support folks...

Problem compiling NAS 2.1 AppLogics on iAS 6.0 SP4 on Solaris

I'm currently trying to upgrade our live server from
iAS 6.0 SP2 to iAS 6.0 SP4 (on Solaris 8) and ran into
a problem in recompiling some NAS 2.1 AppLogics on my
SP4 server. I made no modifications to the code or
build.xml which runs fine on SP2. Here's what happens
when I run build :
wwwtest% build
Searching for build.xml ...
Buildfile: /export/home/iplanet/ias6/ias/APPS/TBG/build.xml
compile:
[javac] Compiling 207 source files to /export/home/iplanet/ias6/ias/APPS
[javac] /export/home/iplanet/ias6/ias/APPS/TBG/BaseResource.java:0: The method void setSessionTimeout(int) declared in class com.netscape.server.nas.BaseResource cannot override the method of the same signature declared in interface com.kivasoft.ISession2. They must have the same return type.
[javac] package TBG;
[javac] ^
[javac] 1 error
BUILD FAILED
/export/home/iplanet/ias6/ias/APPS/TBG/build.xml:48: Compile failed, messages should have been provided.
Total time: 26 seconds
Here's my kludged-together build.xml (only the
compile target does anything for this app...)
<?xml version="1.0"?>






<project name="TBG" default="compile" basedir="..">

<property name="appname" value="TBG"/>
<property name="ear" value="${appname}App.ear"/>
<property name="war" value="${appname}.war"/>
<property name="ejbjar" value="${appname}Ejb.jar"/>

<property name="app.pkgprefix" value="TBG"/>
<property name="ias.bin" value="${ias.home}/bin"/>

<property name="build.compiler" value="classic"/>

<property name="src" value="TBG"/>
<property name="src.docroot" value="${src}/docroot"/>

<property name="build" value="TBG"/>
<property name="build.docdir" value="${build}/docs/api"/>
<property name="build.classesdir" value="."/>
<property name="build.classpath" value="${build.classesdir}:${ias.cpath}:${ias.home}/classes/java/nab25.jar"/>

<property name="assemble" value="../assemble"/>
<property name="assemble.ejbjar" value="${assemble}/jar"/>
<property name="assemble.war" value="${assemble}/war"/>
<property name="assemble.ear" value="${assemble}/ear"/>



<target name="compile">
<javac srcdir="${src}"
destdir="${build.classesdir}"
classpath="${build.classpath}"/>
</target>





<target name="stubs">
<property name="ias.ejbc.cpath" value=".${cpath.seperator}${build.classpath}"/>
<echo message="Started building iAS stubs and skeletons for EJBs" />
<echo message="GreeterEJB" />
<exec dir="${build.classesdir}" executable="${ias.bin}/ejbc">
<arg line="-classpath ${ias.ejbc.cpath} -sl samples.helloworld.ejb.GreeterHome samples.helloworld.ejb.Greeter samples.helloworld.ejb.GreeterEJB"/>
</exec>
<echo message="Finished building iAS stubs and skeletons for EJBs" />
</target>



<target name="clean_ear">
<delete dir="${assemble.ear}"/>
</target>
<target name="clean_war">
<delete dir="${assemble.war}"/>
</target>
<target name="clean_ejbjar">
<delete dir="${assemble.ejbjar}"/>
</target>
<target name="clean_assemble">
<delete dir="${assemble}"/>
</target>
<target name="clean" depends="clean_assemble">
<delete dir="${build}"/>
</target>
<target name="fixforunix">
<fixcrlf srcdir="${src}"
cr="remove" eof="remove"
includes="**/*.jsp,**/*.html,**/*.tld,**/*.xml,**/*.java,**/*.sh,**/*.sql"
/>
</target>



<target name="ejbjar" depends="clean_ejbjar">
<mkdir dir="${assemble.ejbjar}"/>
<copy todir="${assemble.ejbjar}/${app.pkgprefix}">
<fileset dir="${build.classesdir}/${app.pkgprefix}/" includes="**/*.class" excludes="**/servlet/"/>
</copy>
<mkdir dir="${assemble.ejbjar}/META-INF"/>
<copy file="ejb-jar.xml" tofile="${assemble.ejbjar}/META-INF/ejb-jar.xml"/>
<copy file="ias-ejb-jar.xml" tofile="${assemble.ejbjar}/META-INF/ias-ejb-jar.xml"/>
<jar jarfile="${assemble.ejbjar}/${ejbjar}"
basedir="${assemble.ejbjar}"/>
</target>



<target name="war" depends="clean_war">
<mkdir dir="${assemble.war}"/>
<copy todir="${assemble.war}">
<fileset dir="${src.docroot}" excludes="cvs,annontation"/>
</copy>
<copy todir="${assemble.war}/WEB-INF/classes/${app.pkgprefix}">
<fileset dir="${build.classesdir}/${app.pkgprefix}/" includes="**/servlet/*.class"/>
</copy>
<copy file="web.xml" tofile="${assemble.war}/WEB-INF/web.xml"/>
<copy file="ias-web.xml" tofile="${assemble.war}/WEB-INF/ias-web.xml"/>
<jar jarfile="${assemble.war}/${war}"
basedir="${assemble.war}"/>
</target>



<target name="ear" depends="ejbjar, war, clean_ear">
<mkdir dir="${assemble.ear}"/>
<copy file="${assemble.ejbjar}/${ejbjar}" tofile="${assemble.ear}/${ejbjar}"/>
<copy file="${assemble.war}/${war}" tofile="${assemble.ear}/${war}"/>
<copy file="application.xml" tofile="${assemble.ear}/META-INF/application.xml"/>
<jar jarfile="${assemble.ear}/${ear}"
basedir="${assemble.ear}"/>
<delete file="${assemble.ear}/${ejbjar}" />
<delete file="${assemble.ear}/${war}" />
</target>



<target name="javadocs">
<delete dir="${build.docdir}"/>
<mkdir dir="${build.docdir}"/>
<javadoc packagenames="samples.helloworld.*"
sourcepath="${src}"
destdir="${build.docdir}"
author="true"
version="true"
use="true"
windowtitle="iPlanet App Server HelloWorld Sample Application API"
doctitle="iPlanet App Server HelloWorld Sample"
bottom="Copyright © 2000 Sun Microsystems Inc. All Rights Reserved."/>
</target>



<target name="install_javadocs">
<delete dir="../docs/api"/>
<mkdir dir="../docs/api"/>
<copy todir="../docs/api">
<fileset dir="${build.docdir}/"/>
</copy>
</target>
<target name="install_ear">
<copy file="${assemble.ear}/${ear}" tofile="../${ear}"/>
<echo message="Copied ${ear} to sample root directory." />
<echo message="Executing iasdeploy to register ${ear}."/>
<exec executable="${ias.bin}/iasdeploy">
<arg line="deployapp -verbose ../${ear}"/>
</exec>
</target>
<target name="deploy" depends="install_ear">
</target>
<target name="core" depends="compile, stubs, ejbjar, war, ear" />
<target name="all" depends="core, javadocs" />
<target name="install" depends="install_javadocs, install_ear" />
</project>

Hi,
Greetings to you. I'm interested to know the following.
1. Are you able to run cxs engine ?. This means, just start the cxs engine
without any errors before invoking any components with app server.
2. Does cxs engine crash after you start and kas keeps restarting the cxs
engine.
Thanks & Regards
Raj

Moved to iAS SP3 and IIOP to secure app fails

Hello,
I have just moved to iAS SP3 from SP2 and our rich client nolonger asks
me to log in?! In SP2 it did as required by the security roles in the
deployment descriptors. In the CXS log I get the following:
[21/Sep/2001 15:09:58:1] info: ENGINE-ready: ready: 10821
eng =com.kivasoft.types.enumSubKeysIGDSKey@10cb03
eng =com.kivasoft.types.enumSubKeysIGDSKey@6cb8
eng =com.kivasoft.types.enumSubKeysIGDSKey@61a408
eng =com.kivasoft.types.enumSubKeysIGDSKey@581784
[21/Sep/2001 15:12:13:2] error: EB-001: Unable to locate interface
IGXTxnAssocMgr
[21/Sep/2001 15:12:13:4] info: PROT-006: new connection established
I'm wondering about the second last line with the error. Anyone have any
comments/thoughts?
Anyone else using SP3 with an IIOP client to a secure app?
Thanks, Jeff

Hello,
More info. I think it is my deployment descriptor that is the issue.
Somehow SP2 determined what secure application an EJB belonged to and asked
my IIOP client to ask for the user/password. Now I think I need to include
the role information etc within the descriptors for the EJBs. I did this as
described in the DTDs but still nothing. Does anyone have a working secure
IIOP client running with SP3?
Thanks , Jeff
Jeff Williams <[email protected]> wrote in message
news:9og3l8$[email protected]..
Hello,
I have just moved to iAS SP3 from SP2 and our rich client nolongerasks
me to log in?! In SP2 it did as required by the security roles in the
deployment descriptors. In the CXS log I get the following:
[21/Sep/2001 15:09:58:1] info: ENGINE-ready: ready: 10821
eng =com.kivasoft.types.enumSubKeysIGDSKey@10cb03
eng =com.kivasoft.types.enumSubKeysIGDSKey@6cb8
eng =com.kivasoft.types.enumSubKeysIGDSKey@61a408
eng =com.kivasoft.types.enumSubKeysIGDSKey@581784
[21/Sep/2001 15:12:13:2] error: EB-001: Unable to locate interface
IGXTxnAssocMgr
[21/Sep/2001 15:12:13:4] info: PROT-006: new connection established
I'm wondering about the second last line with the error. Anyone have any
comments/thoughts?
Anyone else using SP3 with an IIOP client to a secure app?
Thanks, Jeff

Installing IAS on a Pentium 4

Has anyone tried to install IAS on a Pentium 4 with Windows 2000?. I
know that iPlanet does not support W2K but we have it running on P3s now
when we ignore the warning. The only difference is the chip. On the P4
the server will not load and I get the following errors:
- The application, httpd.exe generated and application error. The
error occurred (date and time). The exception generated was c0000005 at
address 500BF974.
- httpd.exe has generated errors and will be close by windows
- httpps4.0 failed. The error code is DWORD 0 of the record data.
Thanks

I had the same problem a few weeks ago when installing iAS 6.0 SP2 on Win NT
4.0 running on P4 chip. The problem is caused by the JRE version 1.2.2-001
which is bundled with the iPlanet Enterprise Web Server version 4.11. You
need at least JRE version 1.2.2-007 due to a bug in Symantec JIT
(more info about the Java 2 update for P4 chips can be found at
http://java.sun.com/products/jdk/1.2/jre/download-windows.html)
I downloaded the latest Java 2 JRE (1.2.2-008) and replaced
<iPlanetWebServer>\bin\https\jre directory with the new version. After
rebooting the box http service came up fine. The rest of the iAS
installation went smoothly...
Jerry W.
"Nick Cardella" <[email protected]> wrote in message
news:[email protected]..
Has anyone tried to install IAS on a Pentium 4 with Windows 2000?. I
know that iPlanet does not support W2K but we have it running on P3s now
when we ignore the warning. The only difference is the chip. On the P4
the server will not load and I get the following errors:
- The application, httpd.exe generated and application error. The
error occurred (date and time). The exception generated was c0000005 at
address 500BF974.
- httpd.exe has generated errors and will be close by windows
- httpps4.0 failed. The error code is DWORD 0 of the record data.
Thanks

IPS- IAS integration

Hi
I am faced with a problem related to IAS 6.0 SP2 and iPlanet Portal
Server 3.0 SP2. I have deployed the beans on IAS and can access it from
a rich client.
I've servlets running in IPS and from these, I want to access the beans
on IAS. I'm getting an unsatisfied link error. The exception thrown is :
[03/Jul/2001:14:37:02] info (15110): PortalInterface: init
[03/Jul/2001:14:37:09] failure (15110): Internal error: exception thrown
from the servlet service function (uri=/PortalInterface):
java.lang.UnsatisfiedLinkError: specialLoadClass, Stack:
java.lang.UnsatisfiedLinkError: specialLoadClass
at
com.sun.corba.ee.internal.util.JDKClassLoader.loadClass(JDKClassLoader.java:58)
at
com.sun.corba.ee.internal.util.JDKBridge.loadClassM(JDKBridge.java:180)
at
com.sun.corba.ee.internal.util.JDKBridge.loadClass(JDKBridge.java:83)
at javax.rmi.CORBA.Util.loadClass(Util.java:215)
at javax.rmi.CORBA.Util.createDelegateIfSpecified(Util.java:306)
at <Unloaded Method>
at
javax.rmi.PortableRemoteObject.createDelegateIfSpecified(PortableRemoteObject.java:182)
at <Unloaded Method>
at
com.iplanet.portalserver.api.SabreFlightDetails.getPriceAvailabilityInfo(Compiled
Code)
at
com.iplanet.portalserver.api.SabreFlightDetails.getSabreFlights(SabreFlightDetails.java:74)
at com.iplanet.portalserver.api.PortalInterface.doPost(Compiled
Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at
com.netscape.server.http.servlet.NSServletRunner.Service(Compiled Code)
I've set classpaths for the rich client in kjs and also in jvm12.conf of
IPS 3.0. But going by the rich client examples given with IAS, like the
converter client example, we have to set
a LD_LIBRARY_PATH as in runclient.sh. There is no place in IPS where we
can set the LD_LIBRARY_PATH. Is that the reason ?
I would appreciate your thoughts on this issue.
Thanks

Hi Aslam
You will use class maps to divert the traffic to the module. Here are some basic steps.
!Identify the traffic that needs to be diverted to the IPS SSP.
access-list IPS permit ip any any
!Classify the traffic using a class map.
class-map IPS
match access-list IPS
!Specify the action to be taken on the traffic using a policy map. !Since there is already a policy map attached globally in the FW, !the class-map defined above will be added here !only.
policy-map global_policy
class IPS
ips promiscuous fail-close (or fail-open)
Once that is done, the rest of the configuration needs to be done on the IPS using CLI or preferrably the IDM.
HTH. Please rate if useful.
Zubair

IAb of iAS 6.0 sp2 cannt be start on Intel P4 platform!

Similar Messages

Maybe you are looking for