IAC iView in Portal

Dear all,
We have an IAC iview which uses the internet service BBP_POC in SRM. This service is to display purchase Orders. When we want to display the versions of a PO, the iview triggers another Internet service BBP_POC_DISPLY. But we are getting an error message that the service is not available:
URL http://<host>:<port>/sap/bc/gui/sap/its/BBP_POC_DISPLY! call was terminated because the corresponding service is not available.
If we observe the above URL, it has '!' at the end. It shoudl instead have '/' or noting at all. But how do we correct the error, since this call happens dynamically by the internet service BBP_POC. There is no iview created for the second service in the portal.
Nny inputs are welcome.
Thanks a lot.
Ramya.

More info:
If i create an iview out of BBP_pOC_DISPLY, and execute it .. it gives me the message "interface contians errors". This might be because it uses the source of BBp-pOC. ANyidea if this error is linked to the previous error " service not available?
Thanks a lot.
Ramya.

Similar Messages

Internet Services & IAC Iviews

Hi,
I created an IAC Iview on Portal based on an Internet Service. I have configured SSO with the R/3 System. It is also working fine. Now when I preview the Iview, it shows up properly.But when I do it the second time, either it shows SAP Easy access menu or pages does not show at all. After restarting my portal, I again tried the opening the page. It came properly, I used the Menu> System> Logoff path within the Iview to Logoff. Now it is working for the second time also.
So, How do I avoid using the logoff option. I cannot expect the user to logoff after viewing each of these Internet Services. There are about 30 such Iviews based on Internet Services. I hope I made my question clear.
Any suggestions ?
Murali.

hi,
Description
Enables / disables the SAP Easy Access menu immediately after logon if no transaction is specified when running the SAP GUI for HTML.
If ~webgui_easy_access_menu is set to 0 or it is undefined and no value is specified for ~transaction, users logging on to the SAP GUI for HTML see the initial SAP screen without the SAP Easy Access menu. To display the SAP Easy Access menu, they have to request it explicitly by choosing Start SAP Easy Access.
If you set ~webgui_easy_access_menu to 1 and no value is specified for ~transaction, users logging on to the SAP GUI for HTML see the initial SAP screen with the SAP Easy Access menu immediately.
Set by
Service file webgui.srvc .
Values
0
Displays the initial SAP screen without the SAP Easy Access menu after logon to the SAP GUI for HTML, if no transaction is specified (default).
1
Displays the initial SAP screen with the SAP Easy Access Menu after logon to the SAP GUI for HTML, if no transaction is specified.
Example
~webgui_easy_access_menu 1
Try using this service parameter in your internet service file and let me know
You can also view other parameters in the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/24/ef243a84da356be10000000a11402f/frameset.htm
Regards,
Manish

Internet Servies & IAC Iview

Hi,
I created an IAC Iview on Portal based on an Internet Service. I have configured SSO with the R/3 System. It is also working fine. Now when I preview the Iview, it shows up properly.But when I do it the second time, either it shows SAP Easy access menu or pages does not show at all. After restarting my portal, I again tried the opening the page. It came properly, I used the Menu> System> Logoff path within the Iview to Logoff. Now it is working for the second time also.
So, How do I avoid using the logoff option. I cannot expect the user to logoff after viewing each of these Internet Services. There are about 30 such Iviews based on Internet Services. I hope I made my question clear.
Any suggestions ?
Murali.

Hi
Do you mean, the System object - ITS properties.
It was /sap/bc/gui/sap/its/
I changed it to /scripts/wgate/
I got the following Error :
Service cannot be reached
What has happened?
URL http://<IP>:8000/scripts/wgate//ZMIGO/! call was terminated because the corresponding service is not available.
Note
The termination occurred in system RD1 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:itdrd1_RD1_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Please let me know what should be done to correct it.
Murali.

Portal Theme for IACs iViews (ITS Theme Generator)?

Hi guys,
it's me again I got another question / issue (i didn't post it at the other thread, cause this is another issue):
We deployed the SRM BP 5.0 to the Portal EP 7.0 SP14 and now i want to change the look and feel of the SRM iViews.
I allready customized the Portal Theme via the "Theme Editor".
But the IACs iViews are staying SAP standard.
I got the hint to use the ITS Theme Generator, so I did. But now i come to the point where i am trapped:
I specified at the ITS Theme Generator the following entries:
The ITS URL : <ITS Server>:<port>/sap/bc/gui/sap/its/
UserID : ####
PW: ****
Service: bbpsc02
Theme: MyTheme
Then the new page opens and the transaction is displayed. At the upper side the transaction is previewed. at the lower side the images of the transaction is displayed.
AND Now here comes the big Questionmark:
How do i change e.g. the background color of this transaction or the text font? i can't find any section which would offer me this functionality!
The only thing i can "customize" are the images...what about the rest? What if i want to have my buttons grey instead of Yellow?
Or am i completely wrong? does this customization has to be done in the R/3 itself?
Any help or hint is warmly welcome and of course will be rewarded by points.
Thanks a lot ....
best wishes
Stefan

Hi Guys,
actually we made an OSS message.
The result was that there is no standard portal way to customize the IAC themes for the BP SRM witht the tool "ITS Theme Generator".
To my knowledge the only way how to adapt the theme of these iViews is to customize them directly at the SRM back end via the transaction SE80.
Well that's the end of the story...
Greetz to all of you
and see you soon in an other question /post
Kind regards
Stefan

ESS Bus. Pkg EP 6.0 SP19 to R/3 4.7 ext.2 - IAC iView Problem

Given the above components, I've deployed the ESS business package to the Portal. All components deployed successfully... no errors. I'm creating a new Role (custom, not from BP) and I'd like to use one of the iViews from the Business package in this role. I'm using the "Enrollments" iView which seems to be an IAC iView calling PZ14.
Now the problem... when I access this iView via the Portal, ITS is called and the iView loads but only shows me the Easy Access Menu (SMEN). PZ14 never loads. I can enter PZ14 in the transaction field and it will load but it doesn't come up on its own. I also created a SAP GUI for HTML transaction iView to test PZ14 and that one works fine. To meet the customer's requirements though it must look "pretty" ... like the IAC iView does.
The only thing I changed on the iView was the system alias. Changed it from SAP_R3_HumanResources to SAP_R3 (this is the proper name of the system I'm using to test).
Any ideas?
-Kevin

This has been resolved. Oddly enough, I inadvertantly added /webgui/! to the end of the ITS Path definition in the system object. This was causing the afore mentioned behavior. Once removed, the iView behaved as expected.
-Kevin

IAC iViews - Save old status

Hello experts,
I have a problem with the ITS Service in portal side. if I hace two pages, page1 and page2, and this pages are IAC iViews for the same ITS service, and I perform this steps:
1) open page1
2) press a button in page1, that will show more information
3) open page2
4) open page1
When I open the page1, in point 4, the status was not the same that I got when opened the iView for the first time, but with the content that I got after I press button.
How can I fix this? I want that, when I open the page1 in 4th step, I get the same content that in step1.
Can someone help me?
Thank you
BR
Joao

Hi,
Which transaction are you using on your ITS service? You can define two services, one for edit and another one for view. On first step you run first service and on fourth step you run second service.
Hope this helps,
Iván.

How to call IAC Iview from WebDynpro java code

Hi Team,
I am tring to call IAC Iview from WebDynpro Java code. we are passing value but blank page displayed and there is no error show on error log.
Below is Java Code which i am calling.
public void wdDoInit()
 try {
 String strURL = "portal_content/TestSRM/iView/TestSRM"; //WDProtocolAdapter.getProtocolAdapter().getRequestParameter("application");
 String random = WDProtocolAdapter.getProtocolAdapter().getRequestObject().getParameter("random_code");
 //wdContext.currentContextElement().setRandomNumber(random);
//below we are call URL
WDPortalNavigation.navigateAbsolute("ROLES://portal_content/TestSRM/iView/TestSRM?VAL="+random,WDPortalNavigationMode.SHOW_INPLACE,(String)null, (String)null,
 WDPortalNavigationHistoryMode.NO_DUPLICATIONS,(String)null,(String)null, " ");
 } catch (Exception e) {
 // TODO Auto-generated catch block
 e.printStackTrace();
I am passing value from URL.
http://<host Name>:<port>/webdynpro/resources/local/staruser/StarUser?random_code=111111111
when we call above URL we getting blank screen.
Regards
Pankaj Kamble

Hi Vinod,
read this document (from pages 7 ).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b5380089-0c01-0010-22ae-bd9fa40ddc62">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b5380089-0c01-0010-22ae-bd9fa40ddc62</a>
In addition lok at these links: (Navigation Between Web Dynpro Applications in the Portal)
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/ae/36d93f130f9115e10000000a155106/frameset.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/ae/36d93f130f9115e10000000a155106/frameset.htm</a>
<a href="http://help.sap.com/saphelp_erp2004/helpdata/en/b5/424f9c88970f48ba918ad68af9a656/frameset.htm">http://help.sap.com/saphelp_erp2004/helpdata/en/b5/424f9c88970f48ba918ad68af9a656/frameset.htm</a>
It may be helpful for you.
Best regards,
Gianluca Barile

MSS Absence Report PT64 not working via IAC iView

We have a problem with MSS regarding the PT64 Absence Report. If we invoke the report via SAP GUI it produces a report using the correct date criteria specified.
If we invoke the same report through MSS business package v 60.1.4 on EP6 SP2, the Selection Criteria iView delivered in the business package launches a new window to display the report using an AppIntegrator IAC iView and generates a URL as follows:
http://server/irj/servlet/prt/portal/prtroot/pcd!3a!2f!2fportal_content!2fcom.sap.portal.migrated!2fep_5.0!2ftemplates!2fcom.sap.portal.appintegrator.sap.bwc.IAC?System=SAP_R3_HumanResources&SAP_IAC=hrwpc_fc_exec&SAP_QueryString=S%3DZMSS%26F%3D*HISRETABS+5%26B%3D18000101%26E%3D20050901%26V%5B1%5D%3DZRPT_D1%26O%5B1%5D%3DP00003582
The report ignores the date criteria passed from the MSS iView. I can see in the URL above that the URL contains the dates I specified in MSS (start date=18000101 and end date=20050901).
So I assume that either the URL is wrong or that PT64 or ITS is incorrectly interpreting the URL?
Problem is, how do I know what the URL is supposed to look like?
And if ITS or PT64 is incorrectly interpreting the URL query data, how on earth do I investigate or debug this.
Cheers,
Steve

Hi all,
I am having the same problem, only I am not able to see any reports, the link appears ok but the screen opens up empty.... Any ideas ??
Regards,
Paulo Poinha

Preview iView In Portal

Dear all:
when i previewed iView in the portal, i got some problems.
please give me some advices.Thanks~
1. Exception caught: com.sap.ip.bi.base.service.connection.ConnectionException: No connection exists for system "BP5"
com.sap.ip.bi.base.service.connection.ConnectionException: No connection exists for system "BP5"
at com.sap.ip.bi.base.portal.connection.PortalConnectionPool.getConnection(PortalConn... [see details]
2.Exception caught: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing
com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)... [see details]

Hi Aaron,
Check whether you have set all the following properties or not.
If not do this then you will be able to preview the iview in portal.
Connector - contains basic connectivty details
Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs,
Web Application Server - if you wish to access BSPs and/or Web Dynpro for ABAP and
User Management.
You also need at least one System Alias has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system.
Go through the below link which guides you in step-by-step creation.
https://wiki.sdn.sap.com/wiki/display/EP/HowtoConnecttoSAPR3SystemthroughEnterprisePortal7.0Usingan+iView.
Hope it helps you.
Regards,
Ponneswari.
Edited by: Ponneswari Adapa on Apr 15, 2010 6:15 AM

IAC iview - Hiding Menu

Hi All,
I have an requirement to display SP02(spool request) in portal. I cant use transactional iviews and IAC iviews with ~WEGUI enabled. So i have created an IAC Iview with the property ~WEBGUI = 0. So that the user can open the transaction SP02 without sap launch pad. I created and its working fine.
My requirement is: I want to hide the Menu and title bar. i.e only the spool request should be displayed. Please help me in achieving this.
Regards,
Anand

See if this helps you :
http://wiki.sdn.sap.com/wiki/display/HOME/Article%2b-%2bEmploy%2bSAP%2bGUI%2bfor%2bHTML%2binstead%2bof%2ban%2bInternet%2bservice?bc=true

Reg:Navigating to an IAC iview

Hi Experts
I need to call an IAC ivew from my webDynPro Application
Please let me know how to carry out from my application.
Thanks & Regards
Mythri

Hi,
Have you already created your IAC view inside the portal?If yes, you can make use of absolute Navigation from webdynpro by specifying the PCD path as follows.
WDPortalNavigation.navigateAbsolute("ROLES:portal_content/.../your IAC iview ",WDPortalNavigationMode.SHOW_INPLACE,"","",WDPortalNavigationHistoryMode.ALLOW_DUPLICATIONS,"","","","",false,false);
Best Regards
Uma

Reg:Calling IAC Iviews

Hi Firends,
I have created an Workset with two IAC iviews calling TCODE's from R/3 System.
From the portal when the users click the Iview for the first time, the Tcodes are run properly. When they switch to different Iview , the SAP default "Start SAP Easy Acess' Page is being displayed and doesn't call the Tcodes. Once i logout, the Iviews are called properly for first time.
Could anyone throw some ideas for this not to happen.
The parameters passed in SICF are: ~TRANSACTION     YFI_AM
                                                     ~GENERATEDYNPRO     1
                                                     ~NOHEADEROKCODE     1
                                                     ~THEME                     57
                                                     ~WEBGUI                     1
I tried passing parameter: ~WEBGUI_EASY_ACCESS_MENU = 1, where it is not working.
Are there more additional parameters i have to pass?

Try pasing the below parameter and value
~SINGLETRANSACTION = 1
This should solve your problem

EP IAC iview javascript object required error

Hi,
We have installed EP 6.0 SR1 and ITS 6.20 with service pack 19(with hotfix) in one domain. We have created IAC iviews in Enterprise portal. We are accessing the enterprise portal from different domain and we are getting javascript error object required sometimes. This error comes while loading the IAC iview and it comes randomly. But when we access the portal from the domain where we installed the portal & ITS we are not getting this javascript error.
Did anyone encountered this type of error before???.
Please help..
Regards
Vasu

I am assuming this is happening after you have deployed your app and that the app works as expected on your development computer(?). Please confirm...
I need you to tell me the following:
1) how was the app compiled; any cpu, 32 bit, 64 bit?
2) how was the CR runtime deployed (what MSI / MSM did you use?)?
3) if this app is installed under custom app pool see the following:
Deploy the CrystalReportViewers13 virtual directory as a sub-directory of your application.
Copy the Crystalreportviewers13 folder to be a sub-folder at the root of your application. You can configure where your application looks for this folder by using the following Help file [SAP Crystal Reports .NET SDK Developer Guide
|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip] and search the document for ("web.config";). In the section "Configuring your web.config file" follow the instructions specified for setting the resourceURI attribute. This way you can control updates to the viewers when deploying your application.
Note the resourceURI value is the name of the viewers directory and should be preceded with a Tilde
ie value="~/crystalreportviewers13"
Also, have a look at the following two articles. Both are pre CRVS2010, however the ideas re. deploying to a custom app pool still apply. All that changes is the folder name.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Close sessions on ITS IAC iview

Hello Gurus!
i have a technical problem.
I'm working with portal 7.3 and SAP ECC6
I made some IAC iview in my portal but i notify that session is not closed when i navigate or when i close portal.
So if i have 3 IAC iview and i navigate through all, on the end i have 3 pluginhttp sessions open.
i tryed to add ~DISCONNECTONCLOSE parameter but no result.
I notify the problem start from ITS, because when i test transation from SIFC, and i close browser, the session remains open.
Any suggestion?
Thanks in advance
Alessandro

hello Fabio!
thanks for suggestion but i not solved problem:
in note 1660720 the suggest me only how to use DMS logger and where investigate or move focus. In my case i can see the session open in Session Release Agent. So i need check ths problem in R3 .
note 1599643 explain how to configure GroupCleanup.groupExpiration paramenter, but is not my case.
note 596698 is more and less similar to 1660720
in note 1331353 suggest to deactivate popup blocker. I tried but without result
I checked also the kernel release in R3 and is the last version
I think the problem is in R3 side. Maybe a parameter or a configuration? a custom code to add somewhere?

MiniApps & IAC iview

Hi all,
Can anyone tell me the difference between SAP miniapps iview and IAC iview in Enterprise Portal 6.0.
Regards
Vasu

Hi Vasu,
Miniapps is the old name for portlets (iviews) from SAP's Workplace portal. IAC's (Internet application component) is another type of portlet that were developed to run with SAP's Internet Transaction Server (ITS).
Most of SAP's early portal applications were Miniapps or IACs. Most can still be used with EP6.0 portal systems.
Hope this helps,
John

IAC iView in Portal

Similar Messages

Maybe you are looking for