Iam getting error "No entry in table T7INA9" while updating 0008 Infotype.

Dear Gurus,
Whenever i am updating Basic pay infotype i am getting the error "No entry in table T7INA9". Wage types are displaying in the basic pay infotype but amount is not updating. whenever i am entering the amount and pressing enter. the amount is getting erased and its showing following error. Please help
points are awarded according to the reply. Please help me
Regards,
Ravi

You have to maintian these view V_T7INA9
for your wage type .. as this programs checks the eligibility criteria for Reimbersment , allowances and perks if any ..
if not then .. mention as no check needed - and maintain as blank .. your information will be get stored in the IT 8
Thanks and Regards
Jaydeep jadhav

Similar Messages

Error "No entry in table T551A" while creating set work schedule rule.

Dear Team,
I am getting following error while creating set work schedule rule.
Error "No entry in table T551A" for key 22 BBB [ here BBBB is my period work schedule]
The actual prob is i configured all the necessary steps but when i tried to create work schedule rule im getting this error. Also, in the same screen there is one field DWS grouping initially value in this is 00 and gread mode. But after giving ES grp, holiday calander ID etc etc when i try to save that screen that value is chainging to 22 from 00.
My ES grop=2 and PS grop=2 . Is that value is my ES and PS grouping..?? or some other thing.
Request you to please help me out.
Regards
Shab.

HI, there are 8 steps you need to do below:
1. Group Personnel Subareas for the Daily Work Schedule
2. Group Personnel Subareas for the Work Schedule
3. Define Break Schedules
4. Define Daily Work Schedules
5. Define Period Work Schedules
6. Define Employee Subgroup Groupings
7. Define Groupings for the Public Holiday Calendar
8. Set Work Schedule Rules and Work Schedules
All of them belong to TIME MANAGEMENT. I think you miss some steps above.
Please check it again.
Regards!
Minh

IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 2

Hi,
I have configure allowance grouping,wage type model,Pay scale type,Pay scale Level, employee group,Employee subgroup,Level.After that I hire one employee useing "T-CODE PA40".But same time system has giving following error message :- "IndVal of wage type 1BA0: No entry in table T7INA9 for key 40TL101BA0A on 20070824" so I am unable to update infotype 8.Please give me reply as early as possiable.
Regards
Subhedar B.

table t510
MANDT MOLGA TRFAR TRFGB TRFKZ TRFGR    TRFST LGART ENDDA      BEGDA      BETRG
100   IQ    01    01    1     GRADE 13 1            31.12.9999 01.01.2012              0.00
100   IQ    01    01    3     GRADE 13 1            31.12.9999 01.01.2012              0.00
t511
MANDT    100
MOLGA    IQ
LGART    1019
ENDDA    31.12.9999
BEGDA    01.01.1992
ABTYZ       1
WKTYZ     11
OPKEN
ZEINH    030
KOMBI    2
BTMIN    0
BTMAX    0
ADSUM    X
MODNA    TARIF
MODSP
RUTYP
RUDIV    0
ADDJN
MOD01    1
MOD02
MOD03    A
ANMIN    0.00
ANMAX    0.00
V_511_B
Wage Type       1019 Bonus Percentage                  01.01.1992 31.12.9999
EE Subgroup grouping   Personal subarea
0 1 2 3 4 5 6 7 8 9     0 1 2 3 4 5 6 7 8 9
          1                          1 1

Error "No entry in table T589A for P" while creating new Infotype

HI,
I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
"No entry in table T589A for P"
Any input will be highly appreciated.
Thank you,
Farooq.

Hi Farooq,
Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
Regards,
Shrinivas

Third party system user click the url iam getting error?in sap crm IC

Hi Team,
I have given URL to Thrid Party systems.user clicks the link,then he enter the password and username then its getting error like as below..Please help here what settings we need to do.
Third party system user clicks the URL link ,after entering username password Iam getting error ?
Thanks
Kalpana

HI Team,
I have added the parameter crm-ext-integration=true , or we need to any settings for this..Could you please help here..
Error: TO help protect the security of information you enter into this website,the publisher of this
content does not allow it to be displayed in a frame
Thanks
Kalpana

In Production IC AGENT Bussines role ,iam getting error Worker session error in session initialization(SAM_QUEUE NOT SET ) in sap crm?

Hi Team,
In Production IC AGENT Bussines role ,I have configured the bussines role.in DEV,and QA system it is working fine...in production ,iam getting error as below.
Worker session error in session initialization(SAM_QUEUE NOT SET )
Type = SYSTEM_ERROR,ID = ERROR_SESSOPN_INIT,description=
Could youe please help here..
Thanks
Kalpana

Hi Kalpana,
Please take a look at KBA 1954574 - Problems with CRM IC Functionalities related to Communication Session (alerts, greyed out ready/not ready buttons, agent dashboard) in complex system landscapes
This details a few things you need to check.
Let me know how you get on. If you have any questions or concerns.
Kind Regards,
James

Payroll error: No entry in table T549A for key

Hi whilw running payroll, there is a error
No entry in table T549A for key
what could be the possible reason. there are 2 payroll areas one for monthly and the other for semi monthly. this is for semi monthly. monthly is running fine.
-request help on this

Hi,
Go to the perticular table and check whether you have maintained any entries for Payroll area and date modifier for semi monthly period parameter also check whether run payroll bos is checked or not.
Regards

HT4623 iam getting Error -1 when iam restoring using itune

iam getting Error -1 when iam restoring using itune

Hi LordZc,
Thanks for visiting Apple Support Communities.
You can find more information about iTunes restore errors in this article:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
This information relates to error 1:
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Since you have already tried to restore more than two times, I recommend checking for issues between iTunes and security software using the steps in the article below:
Resolve issues between iTunes and security software
http://support.apple.com/kb/TS3125
After doing so, see this article for the steps to restore when your device is in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best Regards,
Jeremy

Getting error message when i am trying to update the excel file using script task in ssis package

Hi Guys,
I am getting error message when I am trying to update the excel. Please find the error messages as below
Error at Update File [Update File]: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Application' is not defined., ScriptMain.vb, 32, 32
Error at Update File [Update File]: BC30002 - Type 'Microsoft.Office.Interop.Excel.Workbook' is not defined., ScriptMain.vb, 33, 25
Error at Update File [Update File]: The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.
Warning at Update File [Update File]: Found SQL Server Integration Services 2008 Script Task "ST_050fcae972904039b4f0fe59b7528ece" that requires migration!
and the code that   I am using is
Dell - Internal Use - Confidential
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.Office.Interop.Excel
<System.AddIn.AddIn("ScriptMain", Version:="1.0", Publisher:="",
Description:="")> _
<System.CLSCompliantAttribute(False)> _
Partial
Public Class ScriptMain
Inherits Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
Enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
End Enum
Public Sub Main()
        Dts.TaskResult = ScriptResults.Success
'Dim proc As System.Diagnostics.Process
'kill all instances of excel
'For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")
' proc.Kill()
'Next
Dim excelnacomm As
New Microsoft.Office.Interop.Excel.Application
Dim wbnacomm As Microsoft.Office.Interop.Excel.Workbook
        wbnacomm = excelnacomm.Workbooks.Open("http://test.xlsx")(renamed
the excel)
        wbnacomm.RefreshAll()
        wbnacomm.Save()
        wbnacomm.Close()
        excelnacomm.Quit()
        Runtime.InteropServices.Marshal.ReleaseComObject(excelnacomm)
End Sub
End
Class
Please let me know what could be the reason
Smash126

Download:
Microsoft Office 2010: Primary Interop Assemblies Redistributable
How to: Add or Remove References By Using the Add Reference Dialog Box / How to:
Add and Remove References in Visual Studio (C#)
Olaf Helper
[ Blog] [ Xing] [ MVP]

I keep getting error code u44m1p34 when I try to update CC2014. I've tried uninstalling several times completely to no avail. Any ideas? It's really bugging me now!

I keep getting error code u44m1p34 when I try to update CC2014. I've tried uninstalling several times completely to no avail. Any ideas? It's really bugging me now!

Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled

I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled firewall 8. even tryed putting mobile in DFU mode to restore it not of this worked so please help me

please replyyy i'm stuck on this like whole week

TS3694 I am getting error code 3194 when i try to update my iphone 4S to IOS 6.1.3. How can i resolve this

I am getting error code 3194 when i try to update my iphone 4S to IOS 6.1.3. How can i resolve this?

Here you go: http://lmgtfy.com/?q=iphone+error+3194

TS3694 iPod touch gets error -1303 when attempting to restore after update (W7)

iPod touch gets error -1303 when attempting to restore after update (W7). This error is not shown anywhere in the specific list. Have done all recommended recovery methods (reboot, update iTunes, restart iPod) to no avail. What is next?

Usually the 1303 error is in regards to a corrupted or missing backup of your iPod Touch. Try removing or moving the backups to another location and then try to restore your iPod once again.
See this article for information on where backups are stored.
iTunes: About iOS backups
B-rock

HT201413 I get error 20 when I try to download updates to installed Apple software I have two users on the IMac. I resolve the problem by clearing all cookies on both users Safari. Why do I need to do this? What is going on?

I get Error 20 when I try to download updates for installed Apple apps on my IMac. I have two users on the IMac, and I resolve the problem by clearing all cookies on both users Safari, opening and closing the App Store for each user, shutting down and restarting the IMac for each user, until finally the download works. There must be an easier way. I also have an Air, where I have no problems whatsoever. Both machines have Doorstop and MacKeeper with the same settings, so I have ruled those programs out as the cause. I believe iot is because I have two users - any ideas?

Please read this whole message and be sure you understand all of it before doing anything. Back up all data before making changes to your settings.
Write down the server addresses.
Click Cancel to close the Advanced sheet. Unlock the preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Open the DNS tab again and change the server addresses to the following:
8.8.8.8
8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself.
2. I’m not advocating Google or anything else as a DNS provider; the server addresses are offerred merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

When I click on check for update I get error, iTunes could not check for an update to the carrier settings for your iPhone. an unknown error occurred 1630

when I click on check for update I get error, iTunes could not check for an update to the carrier settings for your iPhone. an unknown error occurred 1630
Make sure your network setting are correct and your network connection is active or try again latter.

update your itunes to 10.5.2 and error is not showing up anymore..

Iam getting error "No entry in table T7INA9" while updating 0008 Infotype.

Similar Messages

Maybe you are looking for