Iam not able hear the other person voice while calling.

hi there

swonz wrote:
I had Sony aked me to go to settings and select smart connect to delet all data. But it still had a problem. The headset jack and plug on phone are clean. One thing I believe that caused the problem is software update by Android on Lillipop. All calls on normal, WhatsApp, Viber and Line are fine for the earpiece and Mic. Only Skype for which the mic does not work. However, when I call the other person and he picks up the call, the mic works when I pull out the plug and reconnect the plug again. It works all the time that way. So it could be software for Andriod and Skype.Hi, we had the same problem on this new android version. I found a solution-need to remove the headset jack from mobile phone and then return it again then the other person can already hear you. if you do a call on skype with headset on it, the problem will happen again after the other person answer your call. then you need to remove again the headset and reconnect. hope it will temporarily solve our problem. but we need skype to help on this. 

Similar Messages

  • In my viber, Ican hear the other persons voice but they cant hear my voice! please help! emmergency!!

    pls it has been going on for some days! the caller cant hear my voice but I can hear thrm! how can I make my sound correct

    I too have major problems with Viber, the caller can hear my voice but I can't hear anything. Viber can ring, but I can't hear anything when I pick up. And If I make the call, there is no ringing shound either. If the other party picks up, it is absolute silence on my end but they can hear me.
    I have tried uninstalling and re-installing, doing this over itunes, wifi and 3G. Tired using another iphone 5 with the same failures. Used another sim card and also the same result.
    Software is all up to date. The iphone software is 6.1.3 and viber is 2.3.1.
    I am at a total loss to understand or think of further solutions.  Could someone please offer some assistance?? this has been going on for a week now.
    Thanks.

  • I have a problem in iphone4,i am from india and bought a new unlocked iphone4 from USA last month.the problem is when i call someone their is disturbance in the voice and i cant hear the opposite person voice.please inform me how should i overcome this?

    I have a problem in iphone4,i am from india and bought a new unlocked iphone4 from USA last month.the problem is when i call someone their is disturbance in the voice and i cant hear the opposite person voice.please inform me how should i overcome this?

    There may be a defect in the phone. As you bought it in the US the only place you can get it looked at is in the US.
    When you say you bought it new, unlocked did you buy it directly from an Apple store? If you did not it was hacked to unlock it, which could also be your problem. Apple stores are the only place in the US that sells legitimately unlocked iPhones.

  • I just bought this iPhone 4S second hand and during incoming and outgoing calls I can't hear the other person talk unless it's on speaker or if I have headphones in. I don't know what to do I've turned up my volume and checked my settings!! Need help

    I Just bought a second hand iPhone 4S I am having issues with the hearing during incoming and outgoing calls, I have turned the volume up and checked my settings but I still have trouble hearing the other person speak. It works if it's on speaker or if I have headphones plugged in. I need help desperately!!!!! Any suggestions on what to do???

    Hey Itsanaasaunders,
    Thanks for the question. I understand that you are experiencing issues hearing sound while on a call (receiver wise, not speakerphone). The following resource provides troubleshooting steps for this symptom:
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
    http://support.apple.com/en-us/HT203800
    Clear the receiver
    The iPhone receiver won't work properly if it's blocked or dirty. Here's where the receiver is:
    Follow these steps, testing after each:
    - Make sure nothing is blocking the receiver, such as a case or film.
    If you have a new iPhone, remove the plastic film on the front and back of the device.
    - Check the receiver opening to see if it's blocked or dirty. If necessary, clean the receiver opening with a clean, small, dry, soft-bristled brush.
    - While you're on a call, turn on speakerphone. If you still can't hear, then your network or reception could be the issue. Try calling again later or from a different location.
    Restart and update
    1. Restart your iPhone and test again.
    2. If there's still no sound or poor sound quality, update to the latest version of iOS.
    Get more help
    If you've tried these steps and there's still no sound or poor sound quality from your iPhone, contact Apple Support.
    Thanks,
    Matt M.

  • Can barely hear the other person when talking on the phone

    when using the phone function i can barely hear the other person on the line.. the speker volume is at the max.

    remove the thin plastic cover, its not the protective kind its a shipping one. It is covering you ear piece.

  • I can't hear the other person while facetiming on the Imac

    I cant hear the other person while face timing on my imac but they can hear me

    HI,
    There have been similar issues with iChat and I will use that as an example first.
    In iChat the Mic needs to be On (in the Video menu).
    It also needs to be listed in iChat Menu > Preferences > Video section > Microphone Drop down and this needs to match ther Mic set up in System Preferences > Sound > Input.
    In addition to this the Mic needs to be "turned up" high enough in the System Preferences to work with the app.
    So If you Buddy cannot hear you it is your Problem when it comes to iChat.
    If you cannot hear the Buddy it is much more likely that they have not set up the Mic in System Preferences or have the Mic Off in iChat.
    Moving to FaceTime you will find a Mic Setting in the Video menu (if you have two or more Mics).
    If you do then the System Preferences > Sound > Input  and the volume setting there needs to match the choice in the App.
    As it is your contact that you cannot hear you need to get them to check their settings first.
    As for your end, it will be worthwhile doing a PRAM reset.
    Shut down the computer.
    Restart it holding down Apple/CMD ( or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
    9:06 PM      Thursday; June 27, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Very Low Volume on Phone Calls - Can barely hear the other person

    Just picked up my iPhone 4 at the Apple Store. Tried to make a phone call the the call volume is so low I can barely hear the other person calling.
    The speaker volume is not much better. The other person can hear me fine and says the sound is great.
    The volume dots are all the way up.
    The settings sound voulme under ringer is all the way up.
    ipod volume lock is not activated.
    Any other settings to check out?

    OK now I don't feel like I'm the only one. I've also done a hard reset and still suffer from the same issue.
    Since it seems to be the popular question, no the plastic is no longer on my phone.
    To call the volume I'm hearing a whisper would be a overstatement. This is a much bigger issue than the antenna. The phone is basically unusable without headphones. Unfortunately I'm not very close to a Apple store to exchange.

  • When i want to call somwhone with my i-phone, i only hear the other person, if i press the loud-speaker. does anywhone know, how i can solve this problem

    what can i do, when i call someone with mit i-phone, i only hear the other person, when i press the loud-speaker button, does anyone know, how to solve this problem

    Does hte iPhone say headphones when you adjust the volume, even when they aren't connected?
    If it does, there might be some lint or something in the jack. Take a look at this Apple document -> iPhone: Can't hear through the receiver or speakers

  • When I make a call, i can't hear the other person, when I get a call, I can hear them and they can't hear me. What's up?

    when i make a call, i can't hear the other person but they can hear me. when i get a call, i can hear the caller, but they can't hear me. what's up?

    Hello there, Maribelita.
    The following Knowledge Base article has some great steps to work on resolving the exact issue you're describing:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • When making a call I suddenly can't hear the other person but my iphone 4 says it's still connected

    Phone is on orange contract and today during calls I can't hear the other person and the phone thinks we are still connected.  Help please!

    I've got that problem too sometimes. I think it's a mistake in iOS and it will be fixed in another iOS-update

  • TS3367 Using FaceTime between 2 iPhone 4s I can hear the other person but we only see ourselves, how do we see the other person

    Using FaceTime between 2 iPhone 4s I can hear the other person but we only see ourselves, how do we see the other person

    Once the connection is made you should automatically see the other person full screen, with a small inset picture of yourself.  Normally you only see yourself full screen after you initiate the call prior to the other person accepting it.  Are you both connected to wi-fi and are you initiating the call by tapping the FaceTime button on the other person's contact?

  • I can see myself and hear the other person while attempting to connect to face time but cannot see them

    New iPhone 4S. Attempting to use face time but it wont show the person I am attempting to connect with. I can see myself and hear the other person while attempting to connect to face time but cannot see them. Face time was working before.

    Hello Wollyt
    Check out the article below for troubleshooting FaceTime issue.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • When I make a call I can hear the other person but they can't hear me?  Tried everything.

    When I make a call, I can hear the other person but they can't hear me?  Tried everything.  Took it to the local ATT store and all they could tell me is it shouldn't be happening and to take it to an apple store?  Any ideas?

    Try to isolate the issue. Use earphone and if the issue still happens then it might be the phone issue.
    - If earphone works fine then it may be the mic on the iPhone. Try cleaning the debris on the iPhone. Finally a restore of the device and try to set it as a new device. Tha will isolate if it is a software or hardware issue.
    - You can take the phone to Apple store once you have tried all this.

  • When I make a call, I can hear the other person, but they can't hear me. If I put it on speakerphone, we can both hear each other fine. What is wrong?

    When I make a call, I can hear the other person, but they can't hear me. If I put it on speakerphone, we can both hear each other fine. What is wrong?

    take a look at the link
    Iphone: hardware troubleshooting
    http://support.apple.com/kb/TS2802

  • Why the iPhone dose not show the witting in case if the other person have a call and I'm on witting?

    Why the iPhone dose not show the witting in case if the other person have a call and I'm on witting? really I'm dissappointed with this point Why we do not have this service?

    That is not a feature of the iPhone (or of any phone I've ever had so apparently it's far from universal). Apple has not said why they have no such feature.
    You can request such a feature here:
    http://www.apple.com/feedback
    Either the person you're calling will answer you or they won't. What difference does it make why?

Maybe you are looking for

  • Compiler error with default arguments and static template function

    Hi  The following does not compile with visual studio 2010 sp1, and compiles with gcc. #include <string> class A public:    template<class T>    static T& Get(const std::wstring&); class B  public:   void f(     double d,     double c =A::Get<double>

  • What is causing this JDeveloper error DCA-40002 in the WSDL document

    I'm attempting to import a WSDL document in Jdev (11.1.1) and I'm getting the following error; DCA-40002: The WSDL document is invalid due to the following reason: oracle.j2ee.ws.mdds.AtomicPrototypeImpl cannot be cast to oracle.websevices.mdds.Compl

  • Forecasting

    Hi, The consumption values which I entered in the forecasting view of the material master are in whole numbers then why are my forecast values coming in decimals? What setting do I need to do so that my forecast values are in whole numbers ands not i

  • Converting csv files to signals

    I need to convert this csv file to an analog signal.  The timing and magnitude need to be exact

  • Running Java process in Back ground

    We have a script that starts a Java process in Background. But still if I try to exit from the 'Console', it's not allowing me to do so, and if I forcibly kill the console, it's killing my Java process. My question is, how can I make my java process