Iam not able to use all the options in my ichat and neither is my sister can anyone help us were both new to macbooks??
both me and my sister do not have all the options available to us on ichat and we both want to use the video chat help please were both new to the mac worlds. thanks!
Hi,
iChat 6 ?
I have seen one post that suggests the the Connection Doctor (VIdeo Menu) says in the capabilities tab that the AIR will not do Multiway Video or Audio chats.
I am not sure how true this is as iChat 4 and 5 can.
Much earlier Mac computers such as G4 signle Processors do have this issue. I would not have expected it with an Intel Processor.
File Transfers can be dependent on the Port used being open in your router (As can Video and Audio chats)
Screen Sharing requires that you use UPnP to open ports in the router (As well as turning it On in the vidoe Menu).
If you could be more precise I could match my answers to your questions.
It is late where I am and it will be about 20 hours before I read any reply.
10:28 PM Thursday; August 25, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously
Similar Messages
-
I just got an iPad mini, when I try to upload my iPhone backup from my Mac i get the message to upgrade my iTunes. I can not seen to find where the download link is for iPads on apple website. Can anyone help?
The message is referring to iTunes on your computer, not the iPad : http://www.apple.com/itunes/download/
The built-in apps on the iPad can only be updated via iOS updates, so if your iPad mini is on iOS 6.0.2 then its up-to-date -
I just got an iPhone 4S model number MD439LL/A still have the box that it came in along with other info. I can not find Siri. I have looked in settings>general and settings>general>restrictions. Can anyone help me out?
That model is an iPhone 4, not a 4S.
http://support.apple.com/kb/HT3939 -
When I plug in my headphones into my imac only the right side plays music. I tried with other headphones and still has the same problem. I tried the headphones with other devices and they work properly. Can anyone help me with my problem please?
Macs have crazy headpne jacks in different models.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4 -
Green screen on videos. I have a MAC, please help.
Morning brandyfields05,
Thanks for using Apple Support Communities.
For No video or flickering, take a look at this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573#1
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
1. Start up in Safe Mode.
2. From the Apple () menu, choose System Preferences.
3. Choose Displays from the View menu to open the preferences pane.
4. Select any resolution and refresh rate that your display supports.
5. Restart your computer.
Best of luck,
Mario -
Downloaded 10.5 iTunes and when I put in an audio book to import into iTunes as soon as I begin typing book info notice appears that iTunes has stopped working and windows 7 closes iTunes. Anyone else have this problem? I hate that you have no way to contact these people and report problems. I tried the old feedback but that didn't get anywhere. Please, I've got several audio books to load and I'm not getting anywhere. Thanks
You really need to put your codes between the
[\code] tags
see http://forum.java.sun.com/features.jsp#Formatting
for more infoCode tags might make it look a little better, but there's still too darn much code. We're volunteers, after all. It'd be a lot of work to review all of this stuff. Can you demonstrate your problem with something smaller? Learn out how to do a combo box with just a page or two and then appy that to your big problem. That's how I'd do it. - MOD -
[[white background browser]]
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong -
Not able to get all the results if i use "get-spdeletedsite" command
Hi everyone,
I am not able to get all the results when I use the below powershell command.
get-spdeletedsite -limit all
It is giving me only one site, but infact we have more than 100 deleted sites.
If I use the normal command like below it is giving the below output
get-spdeletedsite
Can any one tell me, how can I get all the deleted sites ?
Best Regards
Anil AlladiHi Anil,
For the Limit parameter of Get-SPDeletedSite cmdlet, when we specify its value to ALL, it will return all site collections for the given scope.
For your scenario, the script “Get-SPDeletedSite –Limit ALL” will return all deleted site collections in your SharePoint environment.
If you want to get all deleted site, you can export the result to csv as below:
Get-SPDeletedSite | export-csv out.csv -notypeinformation
Reference:
http://technet.microsoft.com/en-us/library/hh286316(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Not able to download all the stubs using the WSDL provided for Contact.
Hi All,
I am using wsdl2java to download stubs from the wsdl for contact using axis.
But i am not able to download all the files from the wsdl.
I am not able to see ListofContactData.java file in the stubs created,but i a can see in the that in wsdl.
Anybody can help me in this issue.
Thanks & Regards
Amith B NHi Guys..
please post the solution clearly. I have the same problem and have to complete the development in short span..
Please mates.. Hope u ppl will help on time.. if possible.. send me the document.
refer my build.xml which i used for Version 1.0 in the below link.
Re: wsdl v2.0 vs V1.0
My mail id : [email protected]
Regards
Balaji Tr. -
Not able to see all the SAP tables from CR 2008
Hi All,
1)I am not able to see all the SAP database tables(DEV server) from Database expert menu in CR 2008. Only tables those start with alphabet letters upto A & B are visible. I checked the database connection>right click>options> found no filters as well.
We are using the CR 2008 trial version with SAP ECC.
2) When i am trying with Production Server of SAP ECC, I am not able to logon to the SAP from CR 2008. It is giving error message
as : LOGON FAILED : User USER1 has no RFC AUTHORIZATION for function group SYST
Please help me to resolve these. Thanks in advance.Thank you very much ingo.
You helped me a lot.
One more question, when I am trying for SAP database connections say for ex: 10.57.410.70, again and again some times the connection is getting saved in my connections with as new versions/variants like
10.57.410.70_1 or so. How to overcome this.
Thanks in advance ingo
Badari -
Not able to download all the rows to excel sheet from alv grid display
Hi experts,
I am not able to download all the rows which are displayed in alv grid display for some material numbers.
for some materials i am able to download, i used two ways to download 1) from icon(local file) on grid 2) menu list->export.
i checked in debugging till selecting the spread sheet pop up window, i am able to see all the data in internal table.
Can you suggest me what will be the problem....
thanks in advance,hi sandeep,
sorry for didnt specify clearly.
note: EX: "asaasdada in this sentence i said " this symbol is special character not the text.
building final internal table code
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = p_capid
datuv = sy-datum
ehndl = '1'
mktls = 'X'
mehrs = 'X'
mmory = '1'
mtnrv = p_matnr
stlal = '1'
stpst = 0
svwvo = 'X'
werks = p_werks
vrsvo = 'X'
TABLES
stb = i_stb
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_stb1[] = i_stb[].
IF NOT i_stb1[] IS INITIAL.
SORT i_stb1 BY idnrk.
DELETE ADJACENT DUPLICATES FROM i_stb1 COMPARING idnrk.
SELECT bmatn ematn FROM ampl INTO TABLE i_ampl
FOR ALL ENTRIES IN i_stb1
WHERE bmatn = i_stb1-idnrk AND
datuv LE sy-datum AND
datub GE sy-datum.
SELECT
matnr
bwkey
verpr
stprs
bwprh
FROM mbew
INTO TABLE i_mbew
FOR ALL ENTRIES IN i_stb1
WHERE
matnr EQ i_stb1-idnrk AND
bwkey EQ i_stb1-werks.
IF NOT i_stb1[] IS INITIAL.
SELECT matnr werks beskz
dzeit webaz plifz
ekgrp
INTO TABLE i_marc
FROM marc
FOR ALL ENTRIES IN i_stb1
WHERE matnr = i_stb1-idnrk
AND werks = i_stb1-werks.
SORT i_marc BY matnr werks.
ENDIF.
CLEAR i_ekpo.
CLEAR i_vend.
IF NOT i_stb1[] IS INITIAL.
SELECT ebeln ebelp matnr werks loekz aedat
netpr peinh
INTO TABLE i_ekpo
FROM ekpo
FOR ALL ENTRIES IN i_stb1
WHERE matnr = i_stb1-idnrk
AND werks = i_stb1-werks.
SORT i_ekpo BY matnr ASCENDING
aedat DESCENDING
ebeln DESCENDING
ebelp DESCENDING.
IF NOT i_ekpo IS INITIAL.
SELECT k~ebeln k~lifnr l~name1
INTO TABLE i_vend
FROM ekko AS k INNER JOIN lfa1 AS l
ON k~lifnr EQ l~lifnr
FOR ALL ENTRIES IN i_ekpo
WHERE ebeln = i_ekpo-ebeln.
SORT i_vend BY ebeln.
ENDIF.
ENDIF.
ENDIF.
i_ampl1[] = i_ampl[].
IF NOT i_ampl1[] IS INITIAL.
SORT i_ampl1 BY ematn.
DELETE ADJACENT DUPLICATES FROM i_ampl1 COMPARING ematn.
SELECT matnr mfrpn mfrnr FROM mara INTO TABLE i_mara
FOR ALL ENTRIES IN i_ampl1
WHERE matnr = i_ampl1-ematn.
ENDIF.
SORT i_ampl BY bmatn.
IF NOT i_stb[] IS INITIAL.
SELECT stlty stlnr stlkn stpoz idnrk potx1 potx2
INTO TABLE i_stpo
FROM stpo
FOR ALL ENTRIES IN i_stb
WHERE stlty = i_stb-stlty
AND stlnr = i_stb-stlnr
AND stlkn = i_stb-stlkn
AND stpoz = i_stb-stpoz
AND idnrk = i_stb-idnrk.
SORT i_stpo BY stlty stlnr stlkn stpoz idnrk.
ENDIF.
LOOP AT i_stb INTO wa_stb.
READ TABLE i_marc INTO wa_marc
WITH KEY matnr = wa_stb-idnrk
werks = wa_stb-werks
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-beskz = wa_marc-beskz.
wa_outtab-dzeit = wa_marc-dzeit.
wa_outtab-webaz = wa_marc-webaz.
wa_outtab-plifz = wa_marc-plifz.
wa_outtab-ekgrp = wa_marc-ekgrp.
ENDIF.
READ TABLE i_ekpo INTO wa_ekpo
WITH KEY matnr = wa_stb-idnrk.
IF sy-subrc = 0.
wa_outtab-netpr = wa_ekpo-netpr.
wa_outtab-peinh = wa_ekpo-peinh.
READ TABLE i_vend INTO wa_vend
WITH KEY ebeln = wa_ekpo-ebeln
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-lifnr = wa_vend-lifnr.
wa_outtab-name_sup = wa_vend-name1.
ENDIF.
ENDIF.
READ TABLE i_stpo INTO wa_stpo
WITH KEY stlty = wa_stb-stlty
stlnr = wa_stb-stlnr
stlkn = wa_stb-stlkn
stpoz = wa_stb-stpoz
idnrk = wa_stb-idnrk
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-potx1 = wa_stpo-potx1.
wa_outtab-potx2 = wa_stpo-potx2.
ENDIF.
READ TABLE i_mbew INTO wa_mbew
WITH KEY
matnr = wa_stb-idnrk
bwkey = wa_stb-werks.
IF sy-subrc IS INITIAL.
MOVE:
wa_mbew-verpr TO wa_outtab-verpr,
wa_mbew-stprs TO wa_outtab-stprs,
wa_mbew-bwprh TO wa_outtab-bwprh.
ENDIF.
wa_outtab-matnr = p_matnr.
wa_outtab-posnr = wa_stb-posnr.
wa_outtab-stufe = wa_stb-stufe.
wa_outtab-idnrk = wa_stb-idnrk.
wa_outtab-ojtxb = wa_stb-ojtxp.
wa_outtab-menge = wa_stb-menge.
wa_outtab-meins = wa_stb-meins.
MOVE: wa_stb-zzitem_draw_no TO wa_outtab-zzitem_draw_no.
IF wa_stb-upskz = 'X'.
SELECT * FROM stpu INTO TABLE i_stpu
WHERE stlty = wa_stb-stlty AND
stlnr = wa_stb-stlnr AND
stlkn = wa_stb-stlkn AND
stpoz = wa_stb-stpoz.
ENDIF.
LOOP AT i_stpu INTO wa_stpu.
wa_outtab-upmng = wa_stpu-upmng.
wa_outtab-ebort = wa_stpu-ebort.
wa_outtab-uposz = wa_stpu-uposz.
CONCATENATE v_ebort wa_stpu-ebort INTO v_ebort
SEPARATED BY space.
ENDLOOP.
MOVE strlen( v_ebort ) TO v_len.
MOVE: 0 TO x,
128 TO y.
DATA : lt_tab TYPE TABLE OF swastrtab.
DATA : ls_tab LIKE LINE OF lt_tab.
DATA : lv_ebort TYPE string.
CLEAR lv_ebort. CLEAR lt_tab.
MOVE v_ebort TO lv_ebort.
CALL FUNCTION 'SWA_STRING_SPLIT'
EXPORTING
input_string = lv_ebort
max_component_length = 128
TABLES
string_components = lt_tab
EXCEPTIONS
max_component_length_invalid = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IF lt_tab[] IS NOT INITIAL.
LOOP AT lt_tab INTO ls_tab.
CLEAR lv_ebort.
MOVE: ls_tab-str TO lv_ebort.
CONDENSE lv_ebort.
MOVE lv_ebort TO wa_outtab-ebort.
APPEND wa_outtab TO i_outtab.
CLEAR:
wa_outtab-matnr,
wa_outtab-posnr,
wa_outtab-zzitem_draw_no,
wa_outtab-ojtxb,
wa_outtab-menge,
wa_outtab-meins,
wa_outtab-uposz,
wa_outtab-upmng,
wa_outtab-verpr,
wa_outtab-stprs,
wa_outtab-bwprh,
wa_outtab-lifnr,
wa_outtab-name_sup,
wa_outtab-potx1,
wa_outtab-potx2,
wa_outtab-netpr,
wa_outtab-peinh.
* wa_outtab-idnrk.
ENDLOOP.
ELSE.
APPEND wa_outtab TO i_outtab.
ENDIF.
CLEAR v_ebort.
CLEAR: wa_stpu.
REFRESH: i_stpu.
LOOP AT i_ampl INTO wa_ampl WHERE bmatn = wa_stb-idnrk.
READ TABLE i_mara INTO wa_mara WITH TABLE KEY matnr = wa_ampl-ematn.
IF sy-subrc = 0.
LOOP AT i_outtab INTO wa_outtab
WHERE
idnrk = wa_stb-idnrk AND
flag NE 'X'.
wa_outtab-mfrpn = wa_mara-mfrpn.
wa_outtab-mfrnr = wa_mara-mfrnr.
SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
MOVE 'X' TO wa_outtab-flag.
MODIFY i_outtab FROM wa_outtab
TRANSPORTING mfrpn mfrnr name1 flag.
EXIT.
ENDLOOP.
IF sy-subrc <> 0.
CLEAR:
wa_outtab-matnr,
wa_outtab-posnr,
wa_outtab-zzitem_draw_no,
wa_outtab-ojtxb,
wa_outtab-ebort,
* wa_outtab-idnrk,
wa_outtab-menge,
wa_outtab-meins,
wa_outtab-uposz,
wa_outtab-upmng,
wa_outtab-verpr,
wa_outtab-stprs,
wa_outtab-bwprh,
wa_outtab-lifnr,
wa_outtab-name_sup,
wa_outtab-potx1,
wa_outtab-potx2,
wa_outtab-netpr,
wa_outtab-peinh.
wa_outtab-mfrpn = wa_mara-mfrpn.
wa_outtab-mfrnr = wa_mara-mfrnr.
SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
APPEND wa_outtab TO i_outtab.
ENDIF.
ENDIF.
REFRESH i_stpu.
CLEAR i_stpu.
ENDLOOP. CLEAR: wa_matnr1, wa_mfrnr, wa_outtab.
ENDLOOP.
Edited by: srinivasareddy j on Mar 9, 2011 7:16 AM
Edited by: srinivasareddy j on Mar 9, 2011 7:20 AM -
Not able to see all the records thru RSA3.
Hello All,
I am checking 0VALUATION_TEXT extractor on R/3 using RSA3 Tcode.
It is showing only 3 records.
When I am loading this Text Master data through InfoPackage, the records were loaded from R/3 to PSA itself is 6.
Why I am not able to see all the records in RSA3.
Kindly Help me out in this.
Thanks,
GeethaHi Geetha,
Check the data, It seems loded data was 3 records for 2 languages.
In RSA3 it is showing 3 records for EN language.
Assign points if it helps...
Regards,
ARK -
Well im not able to updated all the events I had in the imovie, HELP
Well im not able to updated all the events I had in the imovie, HELP
I have started preparing a small Database application
using JDBC with Swing.
I want to dispaly all the Table names which are
present in the Access Data Source. When i used the
Standard query for this "Select * from Tab" as in
SQL, an eror saying that "not able to resolve symbol
'Tab' ".
Can anybody please help me out to display the table
names?That query
Select * from tabwould work only for Oracle, as far as I know. There is no system table called Tab in Access.
***Annie*** -
Not able to export all the rows into excel
Hi All,
I'm not able to export all the records in discoverer report to excel sheet.
There are actually 27000 records in discoverer report, when i export them to excel sheet i can see only 16000 records.
I'm using discoverer plus.
Any suggestions...please share with me.
Thanks in advance,Hi,
Do you have parameters on the worksheet? if so then are you selecting same as when you ran it?
What version are you using ? Plus? Viewer? Desktop?
You can export the worksheet into CSV instead of XLS and see what you get.
Also check other formats to see if this missing lines happen in all export methods or just the XLS. -
i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)
The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working?
Maybe you are looking for
-
I just renewed my ExportPDF subscription, but I can't sign in to Export PDF online (it keeps taking me to the "subscribe" screen) and when I try to convert from within Acrobat, it says the trial period has expired, please subscribe.
-
Custom Component Error -- Uggh
I have tried to solve the problem using online resouces, 3rd party message boards, Xcelsius tutorials, the textbook "Xcelsius 2008: Dashboard Best Practices", tutorials which came with the Xcelsius SDK, among others, however, I continue to run into p
-
Best way to handle "heavy" streams?
I apologise for the vague title. As a personal project, I am implementing a SOCKS5 server. As you might be aware, SOCKS5 is a simple binary protocol that wraps underlying data streams. I am using InputStream/OutputStream asynchronously for relaying t
-
Could Not Create Java Virtual Machine when lauching PS3 Meadis server
I suddenly get the following error message when trying to launch the PS3 Media Server, " COULD NOT CREATE JAVA VIRTUAL MACHINE". I have tried uninstalling and installing both Java and the PS3 Media Server. Nothing seems to work. Any ideas or advice?
-
What are cookie domains used for?
there is a choice, can someone give me some suggestion? What are cookie domains used for? A/ to be easily recognizable by digital certificates that are also based on domains B/ to instruct the browser that the cookie should be send only to the domain