Iam unable to switch using the stop button in IPOD

whenever a song/video is played iam unable to switch off the IPDOD but if press the menu button for some 6 seconds and then press the hold button iam able to switch off.If the song/video is not played then if i press the hold button iam able to switch off without any problem.

When a song is NOT playing, press and hold the Play/Pause button. THis is how you shut off the iPod. Then, you can engage the Hold switch to ensure you don't accidentally turn it back on.
CHeers
!-Bryan

Similar Messages

My phone froze so i switched it off using the power button and home. now everytime it switches on, it wont go past the apple screen??

my phone froze so i switched it off using the power button and home. now everytime it switches on, it wont go past the apple screen??

Hello 3m4nz4,
After reviewing your post, I have located an article that can help with your device. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iOS: Not responding or does not turn on - Apple Support
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of these symptoms:
Does not return to the Home screen after you press the Home button
Does not wake from sleep after you press the Sleep/Wake button
Does not turn on (or power on) when you press any button
Does not start up past Apple logo
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
To troubleshoot these symptoms:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

In Adobe Digital Editions a ding sounds everytime I use the arrow buttons to scroll...how do I stop this?

In Adobe Digital Editions a ding sounds everytime I use the arrow buttons to scroll...how do I stop this?

You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing]: press F7 to toggle.
See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
See also http://kb.mozillazine.org/Accessibility_features_of_Firefox

My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

My iphone 4s' screen is black, but it's still on and charging. I broke my lock screen button so I am unable to turn it off using the home button and lock button. Is there any other way my phone can restart or turn off ? Is my phone broken for sure?

Kbkohn wrote:
I am in tears right now because I entered all my 11month old sons milestones into my phone and now I have nothing I'm so upset and am hoping there is a way to get this information back.
Most intelligent people would not store such sensitive data on a device that could so easily be lost, stolen, or damaged. Even if they chose to do so, they would use the device as designed and regularly sync and backup that device as described in the User's Guide.
Have you done so? If you have, all of the data is either in iCloud or iTunes on your computer. Replace the device and restore the new iDevice with the backup of the old one.

Agents unable to perform Call Transfer using the shortcut button

Hello All,
We are facing this same issue for the last 3 days, any help will be truly appreciated.
Scenario : When customer calls in, Few agents are unable to do call transfer using the shortcut button on the CAD Interface. however when this fails they still can manually transfer the call by entering the number as a work around.
This is not happening for all agents and for those this is happening it happens intermittently. What could be the reason. please guide.

This def sounds like an MTP issue.. Are you using software MTP or hardware MTP's on the gateways? I suggest using Software session on the gateways as it won't use DSP and will allow for much more the CUCM itself can support...
Pretty good chance this is the issue...
(Check RTMT and see if you are getting alerts about media resource group list exhausted)
Chad

I updated Adobe flash player and now i'm unable to open Opera and I have to use the power button to shut down the computer?

I updated Adobe flash player and now i'm unable to open Opera and I have to use the power button to shut the computer down.
How do you delete programs?
thanks

If Flash Player is indeed the problem I would suggest using the Adobe Uninstaller.
Have you tried using a different browser such as Chrome, Firefox or Safari to see if they have a problem with Flash?

Can I use the "same" button multiple times for multiple galleries?

OK so I am extremely untrained in CS4 and Actionscript. However I have managed to get along fairly well until I started to dynamically upload images as a gallery. This works great if I have one gallery, but for my site I have 9 galleries!!! I have a back and next button, but I want to be able to use those same buttons for all of the galleries so they look the same. I have split them up and renamed them, but I am clueless on how to script the buttons to work. Please help...and don't laugh at my poor scripting. This is what I have now because I do not know where to put the other button names without getting errors.
stop();
next_btn .addEventListener(MouseEvent.CLICK, nextImage);
var imageNumber: Number=1;
function checkNumber(): void{
    next_btn.visible=true;
    back_btn.visible=true;
    if(imageNumber==15){
        trace(imageNumber);
    next_btn.visible=false;
    if(imageNumber==1){
        trace(imageNumber);
    back_btn.visible=false;
function nextImage(evtObj:MouseEvent):void {
    imageNumber++;
    mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
    mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
    mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
    mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
    mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
    mc_animals.source= "design/animals/an"+imageNumber+".png";
    mc_icons.source= "design/icons/icon0"+imageNumber+".png";
    mc_objects.source= "design/objects/pc"+imageNumber+".png";
    mc_typography.source= "design/typography/type"+imageNumber+".png";
    checkNumber();
back_btn .addEventListener(MouseEvent.CLICK, backImage);
function backImage(evtObj:MouseEvent):void {
    imageNumber--;
    mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
    mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
    mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
    mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
    mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
    mc_animals.source= "design/animals/an"+imageNumber+".png";
    mc_icons.source= "design/icons/icon0"+imageNumber+".png";
    mc_objects.source= "design/objects/pc"+imageNumber+".png";
    mc_typography.source= "design/typography/type"+imageNumber+".png";
    checkNumber();

I'm still a novice with Flash myself, but I have two comments.
First, at this point, won't your buttons control all galleries at the same time? Which means, if I go to image 5 in one gallery, then move to another gallery, I'll start at image 5, because the actions are all connected.
Second, you can definitely use the same buttons for multiple galleries. It seems to me that as long as you've assigned the buttons an instance name, these actions should already work to control all the galleries (see the note above). I guess I would need to understand a bit more about how your project is built.

How to send the ALV GRID output to spool by using the print button in std t

How to send the ALV GRID output to spool by using the print button in standard tool bar.
We have created a button in the va02 transaction. If user click on the button the new screen will be display on that screen we are populating the alv grid output using the oops concept. But i am unable to send the output to spool using the print button in the standard tool bar.
I am able to display the Print parameter dialog box but i am not able to send it to spool.
Kindly help.
Thanks In Advance.
G.V.Ramana

Hi Shaik,
There is not properties button in my print screen.
MODULE user_command_0900 INPUT.
    WHEN 'EXCEL'.
      PERFORM excel_download.
    WHEN 'PRI'.
      PERFORM print_output.
form Print_output.
CALL FUNCTION 'RSPO_LIST_LAYOUT_FITS'
           EXPORTING
                columns        = 80
                device         = 'ANY '
                lines          = 65
                maxpenality    = 1999
           TABLES
                layouts        = lt_layouts1
           EXCEPTIONS
                unknown_device = 1
                OTHERS         = 2.
      IF sy-subrc = 0.
        LOOP AT lt_layouts1.
          IF lt_layouts1-penality < 1000        AND
             lt_layouts1-penality < l_min_penality.
            l_layout       = lt_layouts1-layout.
            l_min_penality = lt_layouts1-penality.
          ENDIF.
        ENDLOOP.
        IF NOT l_layout IS INITIAL.
          CALL FUNCTION 'GET_PRINT_PARAMETERS'
               EXPORTING
                    mode                   = 'CURRENT'
                    line_size              = 80             "#EC *
            new_list_id            = l_new_list_id
                    no_dialog              = l_no_dialog
                    layout                 = l_layout
               IMPORTING
                    out_archive_parameters = rs_arc_params
                    out_parameters         = rs_pri_params
                    valid                  = l_valid
               EXCEPTIONS
                    archive_info_not_found = 1
                    invalid_print_params   = 2
                    invalid_archive_params = 3
                    OTHERS                 = 4.
          IF sy-subrc NE 0.                                 " INS SLIN
          ENDIF.                                            " INS SLIN
          IF rs_pri_params-linsz LT 80 OR
             rs_pri_params-linsz LT gt_stack-s_lprint-width.
            gt_stack-print_line_break = 'X'.
          ELSE.
            CLEAR gt_stack-print_line_break.
          ENDIF.
          IF l_valid NE 'X'.
            rs_pri_params = ls_pri_params_sav.
            rs_arc_params = ls_arc_params_sav.
          ENDIF.
        ENDIF.
      ENDIF.
endform.                    " Print_output
    CALL METHOD gv_cost_tot_alv_grand->set_table_for_first_display
            EXPORTING
               is_layout         = gs_layout_cost_tot_grand
            CHANGING
               it_fieldcatalog   = gt_fcat_cost_tot_grand[]
               it_outtab         = gt_cost_tot_grand[].
Please check my code

How can you backup your iPhone without using the front button?

My front button doesn't work again. Had this fixed a week ago and it stopped working again.
So how do I backup the iPhone without being able to close the email account it is in now and get to the Settings without using the front button?

Restart your iphone by using the power button. After the restart you will be able go to the settings and enable assistive touch!

How do I close a running .vit using the X button without getting the save VI dialog?

One solution is to save the running .vit instance to disk before the operator is able to use the X button to close the running VI. This is awkward as I don't need another numerically named copy of the .vit on my disk. Adding a "Quit" button to my .vit front panel is also an option but it would be nice to be able to use the X button instead.

If you have LabVIEW 6.1 or higher, you can use the Event Structure to capture the click of the 'X' button, and choose to ignore it and close the panel.
Configure an Event Case to "This VI..Panel Close?" filter event. (note the question mark) On the right side of this new case, there will be a boolean terminal that will let you discard the event. Open a reference to the VIT and pass this out of the main loop, and use a property node on this reference to close the front panel, then close the reference.
It will go away when you hit the 'X' without prompting to save.
A simple example is attached. You'll either need ot make a change or copy everything to a new VI and run that to prove it doesn't prompt for saving changes. This is in 7.1, Let me know if you need it in an earlier version.
EdMessage Edited by Ed Dickens on 03-03-2005 12:58 PM
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Attachments:
Close without Save Prompt.vi ‏25 KB

How do i change what the stop button does

Is it possible to change the behavior of the 'STOP' button depending on the state of the 'PLAY' button? What I would like is this; When Logic is playing the 'STOP' button stops play leaving the playhead where it is. If the stop button is pressed again (while logic is stopped) the playhead returns to it's previous position.
This is how I've always used the transport in cubase and it works really well when tracking.
Thanks in advance!

Right-click, or click-hold on the stop button to bring up a list of possible behaviors.

How can I have the stop button go to a picutre

On commercial dvds, when you push the stop button it goes to a picture.
How can I do the same thing on my dvds?
I am using Encore 1.5

Ruud,
Thanks for that link. I thought that I'd read every post (except for Mac Errors, and the earliest Subtitles posts), but must have missed this one. Just got the PDF and will learn from it.
Jay,
I thank you for asking about this feature, as I had never paid close enough attention to my commercial DVDs to notice, and hence never asked about it.
Hunt

Why no mention of the stop button on mp3 playe

im from the old scholl, belt and braces etc...
bought this new mp3 thingy (zen touch) lovely bit of kit, 20mb and only ?25
dosnt bother me its like a brick, im a bit big myself!
played with it and and got ,000 songs on it, absolutley smashing
only one small problem, wheres the STOP button :angry:
i've looked and looked, cant find it, im pausing it, im switching it off
but no sign of a bloody stop button, either on the machine or in the booklet
so i register here and try a search, i find lots of questions about a stop button
lots of good answers and it all make sense, but if its that obvious and makes complete sense
why dont creative put it in the booklets?
i dont want or need one, but i would like to know i dont want or need one
why keep the information a secret?
oh the touch is a the biz, love it
stop moaning about the touch pad, im a brickie woith large calous hands an i can work it fine
will

hi trance
thanks for the reply, sorry i rambled you may have missed my point
i dont require a stop button, i quite like the fact that pause /play do the job better
what i and others would like though, is somebody incuding it in big letters in the booklet
a phrase like "oh for the dummies, theres no STOP button" and small explanation why
thers 70 odd pages in the cd manual im sure somebody could fit that in.....
cheers
will

I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

Hi nitramred,
To start troubleshooting this issue where you are unable to adjust the volume after receiving a call, please go ahead and first force close all of the apps currently running on the device, and then reset it by following the steps in the articles below.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
Take care,
Alex H.

HT4623 I cannot update my iOS even when I use the update button from iTunes.

When I use the update button from iTunes it gives me this message " the iPad soft where update server could not be contacted (that's in boldface). Make sure your network settings are correct and your network connections is active, or try again later." my network settings are active and correct (I think it is correct) and I tried again later many times. Please help me I want to go to iOS 6.1.

This happens a lot! Go to settings> general> reset> reset network settings. When this is completed, anything stopping the update will be removed. Try it again after that.

Iam unable to switch using the stop button in IPOD

Similar Messages

Maybe you are looking for