Iantivirus and MBP Running Hotter

Just read that iantivirus makes the MBP run hotter. I have noticed that since I started using iantivirus my SMC FanControl shows the temp to be about 69C doing nothing. Am I better off just not using iantivirus???

Yes, until its developer gets it sorted out. There's nothing on the loose for it to catch, so you're in no danger without it.
Message was edited by: eww

Similar Messages

  • MBP running hotter than usual and shutting off randomly

    Hey everyone,
    I have a MBP 2.16Ghz, it's about 20 months old. About a year ago I had some problems with it and Apple replaced my battery and my motherboard. The machine was running fine without any problems. This week I realized that the MBP was becoming hotter than normal and that the fans were running a lot more frequently. Eventually the MBP shut down on me randomly while running it on an almost full battery. I then decided to reset the SMC and re-install the Intel 10.4.11 combo update. While using the MBP on a full battery, once again the fans kicked in while just surfing the web. The fans would never turn on before while surfing the web. All of a sudden the MBP just shut down on me. I really have no idea what the problem could be. Unfortunately I'm out of warranty. If anyone has any suggestions or similar issues please do post. Thanks.

    Thanks a lot for your reply. I did run the Apple Hardware Test and after running both normal and extended tests no trouble was found. I managed to download the widget called iStat Pro, I realized that my CPU was idling at 50%, and the CPU temperature was 80 degrees Celsius. This caused my fans to run consistently at 6000RPM. I discovered that the random shut down while running on the battery was caused by too much current being drained by the system. So as you suggested, it was indeed happening for safety reasons.
    By looking at the Activity Monitor and selecting all processes I saw that a process called printjobmgr was utilizing 100% of the CPU. I found this strange as I had performed several restarts and would have expected this process to terminate on its own. As soon as I used Force Quit, everything returned to normal. Strangely, every time I print something, the printjobmgr starts up and utilizes 100% of the CPU. This lasts until the printing is finished. I still was unable to find a permanent solution to this.

  • Upgraded to Yosemite and MBP running slow.  Help!

    The EtreCheck is below.  Computer ran great before the upgrade...  Not sure what to do.
    EtreCheck version: 2.2 (132)
    Report generated 4/27/15, 8:46 PM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro7,1
        1 2.4 GHz Intel Core 2 Duo CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery: Health = Check Battery - Cycle count = 419 - SN = 9G0310GVSD3MA
    Video Information: ℹ️
        NVIDIA GeForce 320M - VRAM: 256 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10 (14A389) - Time since boot: 21 days 4:56:49
    Disk Information: ℹ️
        Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 249.20 GB (29.96 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Inc. Apple Internal Keyboard / Trackpad
    Configuration files: ℹ️
        /etc/hosts - Count: 15
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.Maxtor.driver.PowSecDriver (4.3.19) [Click for support]
        [not loaded]    com.cy.iokit.Morpheus (1.4) [Click for support]
        [not loaded]    com.maxtor.iokit.IOFireWireMxBt (4.2.6) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.icloud.fmfd.plist
        [killed]    com.apple.printtool.agent.plist
        [killed]    com.apple.scopedbookmarkagent.xpc.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        6 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.periodic-monthly.plist
        [killed]    com.apple.wdhelper.plist
        5 processes killed due to memory pressure
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.hp.help.tocgenerator.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
        [loaded]    com.divx.agent.postinstall.plist [Click for support]
        [loaded]    com.facebook.videochat.[redacted].plist [Click for support]
        [running]    com.google.Chrome.framework.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
        [loaded]    com.valvesoftware.steamclean.plist [Click for support]
    User Login Items: ℹ️
        Steam    Application  (/Applications/Steam.app)
        iTunesHelper    UNKNOWN Hidden (missing value)
        Backup Engine    Application Hidden (/Library/Application Support/Maxtor/Backup Engine.app)
        uTorrent    Application  (/Applications/uTorrent.app)
        Google Chrome    Application  (/Applications/Google Chrome.app)
        Spotify    Application  (/Applications/Spotify.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
        OVSHelper: Version: 1.1 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 2.4.1.4 [Click for support]
        OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        DivXBrowserPlugin: Version: 2.2 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        OnLiveGameClientDetector: Version: OnLiveGameClientDetector 1.0.0 [Click for support]
        googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
        iPhotoPhotocast: Version: 7.0
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    Safari Extensions: ℹ️
        DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
        DivX  [Click for support]
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        Growl  [Click for support]
        Perian  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            12%    WindowServer
             3%    nsurlsessiond(2)
             0%    GoogleTalkPlugin
             0%    coreduetd
             0%    softwareupdate_download_service
    Top Processes by Memory: ℹ️
        1.06 GB    com.apple.WebKit.WebContent(10)
        481 MB    kernel_task
        111 MB    Safari
        98 MB    Adobe Photoshop CS5
        66 MB    Google Chrome
    Virtual Memory Information: ℹ️
        52 MB    Free RAM
        3.95 GB    Used RAM
        28 MB    Swap Used
    Diagnostics Information: ℹ️
        Apr 27, 2015, 08:16:29 PM    /Library/Logs/DiagnosticReports/Adobe Illustrator_2015-04-27-201629_[redacted].hang

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.
    When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

  • Help Kernel_task eating CPU and MBP running hot since 10.6.3

    Hi Guys,
    Need some real help here. My laptop has become almost unusable here because the CPU goes up to 100% and the culprit is kernel_task.
    Ive noticed it slightly after installing 10.6.3. CPU runs up to 108c degrees Celsius.
    Ive tried reseting PRAM
    Ive tried reinstalling OS with a time machine backup
    Getting very annoyed. Is there anything I can try?

    I tried a reset SMC and a reboot afterwards. However that did not resolve the problem.
    Havent really been hearing the fans lately. CPU is 79C celcius.
    As i said in my post previously, it is the kernel_task process that is using up the majority of the CPU.
    Below is a screenshot
    http://yfrog.com/gi99353705p

  • Macbook Pro has short battery life and runs hotter after firmware update

    I installed the macbook pro EFI firmware update yesterday and now my MBP runs hotter and the fan starts running earlier than it has ever done before. Also, my battery lasts 51 minutes from a full charge whereas, before the update, it lasted 2 hours (using the same programs and display settings).
    Has anybody else seen this problem?
    Please tell me I'm not alone with seeing this. I am hoping that there is a solution and it's better than 'buy a new battery'. The fact that my box now runs hotter with the fan on more constantly would not be solved by a new battery I think.

    Also had the problem of MBP running much hotter after most recent Firmware update.
    My fans have been running at 6k RPM constantly, and processor Temps have been running at 70-88°.
    Following the advice in this topic, I checked the Activity Monitor, which told me both my account and my son's account (which was running but had no actual applications running) had separate Airport processes going nuts – each at approx 80-95%!
    Switching off airport and logging out of my son's account almost immediately started to cool the processors, and the fans began to slow down. Switching Airport back on doesn't seem to heat things up again, but if I start to crunch numbers, it all happens over again...
    So who knows why the firmware update is making these processes freak out.... weird.

  • So is it just me, or is Mavericks a bust?  My MBP runs way hotter now. I don't have time for trial and error solutions. Is Apple offering a way to downgrade back to Mountain lion? I want out of Mavericks ASAP.

    So is it just me, or is Mavericks a bust?  My MBP runs much hotter since the upgrade. Why do I need ot sit around watching Activity Monitor, manually controlling my fans, and deleting extensions that I enjoy using. Don't even get me started on the Quicktime/Mov issues. I had none of these issues on Mountian Lion. Searching these forums, I see it's not just me. Why would Apple release a new system w/o peoperly testing it on MBPs?
    I don't have time for trial and error solutions. I've tried the obvious ones. No help. Is Apple offering a way to downgrade back to Mountain lion?  Or better yet, a Mavericks update that adresses these problems? As of now, I want out of Mavericks ASAP.
    My processor is 2.6 GHz Intel Core i7.
    8 GB 1600 MHZ DDR3 memory.
    13inch MBP purchased ust over a year ago- 1-13.

    jonny a wrote:
    Nope, it'a not just me, see above. And yup- I'm backed up, But I don't own a Mountain lion install disc. That's why I was posting here in the first place. Thanks
    Nobody owns a ML install disc - ML was only ever distributed as a download from the Mac App Store.
    If you have a Time Machine backup, you can boot into recovery mode and restore from your Moutain Lion TM backup volume.  If you have a system clone, then you can boot from the clone, and just clone ML back onto your internal drive.
    Going back to your previous installation from a backup should be trivially simply if you have the backup in hand.

  • MBP runs noticebly hotter after upgrades

    I am able to monitor the various temperatures around the MBP using a program called TemperatureMonitor. I recently upgraded from 2 to 4 GB of RAM, as well as upgrading my home router to a N from a G (at roughly the same time). I'm not sure what might have done it, but I have noticed that my CPU temps are quite hotter than usual. Before the 2 upgrades my CPU temps would be in the 50s, 60-70 under load. Now, just running firefox and mail, my CPU temp will hover around 75-80. Does this sound normal to anyone else. I was under the impression that RAM upgrades shouldn't place any additional loads on the CPU, and I can't see why connecting at 144 MBits over 54MBits would change anything either.

    Pacman9889,
    Its really quite simple. More ram equals slightly MORE power usage. More power means MORE HEAT. This has happened to some degree on every laptop (Apple and Others)I've ever upgraded. I will however agree that in most scenario's, its a bit MORE pronounced on the Mac's. I (personally) attribute that to the way mac laptops are cooled not being as aggressive as on most pc laptops (with actual INTAKE and EXHAUST vents, and higher running fans by default). I personally could care less about the noise, so I use smc fan control on my macs to balance it all out to MY liking/comfort zone. To each their own...
    Hope this helps!

  • From pages on a mbp running 10.9.1, pages 5.0.1 does not sync automatically to iCloud after a doc is created and saved. I have rebooted and reset all devices.

    From pages on a mbp running 10.9.1, pages 5.0.1 does not sync automatically to iCloud after a doc is created and saved. I have rebooted and reset all devices.

    Welcome to the Apple Community.
    What exactly do you mean by 'it doesn't save'.
    Does this mean it doesn't save at all, doesn't save to the iCloud folder or doesn't sync with other the devices or iCloud.com.

  • I have a MBP running 10.6.8 and after the recent iOS update I have not been able to sync my devices. I was able to sync an ipod, but not iphone or ipad. iTunes recognizes my devices, but sync button stays grayed.

    I have a older MBP running 10.6.8 and after the recent iOS update I have not been able to sync my devices. I was able to sync an ipod, but not iphone or ipad. iTunes recognizes my devices, but sync button stays grayed. I've changed my USB hub, reinstalled iTunes and run disc cleanup. No luck.

    You said that your computer will sync other iPods? Are they iPod touches? Other iPod use different drivers the the touch And iPhone and iPad).
    You can try:
    iOS: Device not recognized in iTunes for Windows
    Does it charge? Does the iPod work?
    I would try on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    If defective and not abused you will walk out with a replacement

  • I recently (Jan 2012) acquired a MacBook Pro (MBP) running 10.7.4 and an AirPort Express.  I also have an old PPC G4 tower (Digital Audio model) running 10.4.11.  The OS software on both machines is totally up to date.  AirPort Utility on the G4 is 5.4.2

    I recently (Jan 2012) acquired a MacBook Pro (MBP) running 10.7.4 and an AirPort Express.  I also have an old PPC G4 tower (Digital Audio model) running 10.4.11.  The OS software on both machines is totally up to date.  AirPort Utility on the G4 is 5.4.2 and on 6.0 on the MBP.  I bought a used AirPort card for the G4, I believe it is 802.11b compatible, and the wireless data rate is specified at 11 Mbps.  Being a newbie to wireless, it took me many days to get these two machines to link up.  This network is not connected to the internet, and there no other networks in the vicinity.
    My last problem to solve is the very slow file transfer speeds between the two machines. The transfer time seems to vary depending on which machine I use to initiate the transfer, and which direction the transfer is going.  For example: If I initiate the transfer from the G4 and send a 5.4MB file to the MBP it takes 1:32 (min:sec), while the same file going from the MBP to the G4 takes 27 seconds.  On the other hand if the transfer is initiated on the MBP, going from the MBP to the G4 takes 2:56, while going from the G4 to the MBP takes 1:59.  I realize that these times are not actual wireless transfer times but includes the entire transfer process.
    Both machines and the AirPort Express are within a 4-foot radius.  Both machines are set to radio channel 2.  The AirPort Express is set for 802.11n(802.11b/g compatible) with WPA/WPA2 Personal wireless security.
    Any help would be appreciated.
    CEU2

    BDAqua,
    Thanks for the response.
    Apple has used the term "Digital Audio" to identify this machine.  System Profiler has the following information:
    Machine Name:          Power Mac G4
      Machine Model:          PowerMac3,5
      CPU Type:          PowerPC G4  (2.1)
      Number Of CPUs:          1
      CPU Speed:          800 MHz
      L2 Cache (per CPU):          256 KB
      Memory:          768 MB
      Bus Speed:          133 MHz
      Boot ROM Version:          4.3.3f2
      Serial Number:          XBxxxxxMK9
      Sales Order Number:
    Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet.  The machines are not always so close together, I did that to simplify the testing.  With the very slow transfer speeds I am reluctant to move ahead with the internet step. 
    <Edited By Host>

  • Installer disk not found message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks?

    I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks. Any ideas?
    I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive.
    Thanks  Tim 

    You might have better luck in the Boot Camp community. I'll ask the hosts to relocate your post.
    Boot Camp Community

  • Difficulty using a projector. I have a MBP 17" and am running 10.6.8. Often I need to make a Powerpoint or other presentation  at a client and I want to connect my computer to their projector. Either it won't display on the projector at all. HELP!

    Difficulty using a projector. I have a MBP 17" and am running 10.6.8. Often I need to make a Powerpoint or other presentation  at a client and I want to connect my computer to their projector. Either it won't display on the projector at all. Once it displayed but the presentation mode was on the big screen and the presentation I wanted to show was on my MBP screen. I have the adapter( white ones) to attached to the projector cables.  I am so frsutrated...it looks so silly not to have a computer work during a presentation..
    Another problem one the rare occasion that it shows on the screen is that the presentation does show just my desk top.  Any ideas?
    Thanks !

    You often have to turn off Mirroring to be able to set the second "screen"s resolution to something reasonable. When you do, the two screens become an "Exceeded Desktop" joined along one edge, and the Arrange pane in displays prefs can allow you to specify what edge. Initially, it will show a vacant extension of the built-in screen's desktop.
    The mouse moves freely across that shared edge, and can allow you to drag the presentation window across to the the projector screen and re-size it to fit.

  • MBP running hot, full fans and sluggish with both Safari and Firefox

    Hi guya,
    Im having problems with my kate 2007 MBP.
    Im sure lately it seems to be running slower and slower and more and more sluggish - I was hoping my Mac wouldn't be subject to "slowdown" like every PC ive ever owned has.
    The biggest problem is that if i use either Safari or Firefox to browse the web, they quickly start using 80-100% of my processor causing everything else to run sluggish, the computer to get hot, processors to run up to 90 degrees and fans on full.
    Perhaps i multitask more than some people - I can tend ot have a lot of tabs open in Firefox, but sometimes Safari or Firefox show this behaviour with just one tab open.
    I do multitask by having about 8 programs open at once and I jump from job to job, but in its early life the MBP used to deal with this - now i feel that i type faster than writing appears on screen, i have to wait ages to work in programs like indesign, and forget trying to run a game like The Sims...
    Does everyone else have the 100% processor problems with Safari (and yes im on version 4, and the latest version of firefox too) the only browser which doesn't give me these problems is Opera - I can have many tabs open and it uses very little CPU, I just dont like use Opera as much as Firefox which is my browser of choice.
    But why would my OSX run differently to anyone elses? Is there a problem with my Macbook, is there a problem with OSX (does it need installing again?) Is it just time for me to buy a new Macbook Pro - or if I run firefox on that will i get the same problem? Ive got nearly 30gb of spare HD space and maxed it out with 4gb of Ram - so neither of those are causing a problem either...
    Any input would be great...

    Have you tried restarting the comp? Sometimes a simple refresh will cure the sluggishness.
    Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
    Regarding your comp running hot, make sure it is properly ventilated while in use. The MBP is not a laptop. According to the user manual it states in part:
    +"Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings."+

  • I have a MBP running Mountain Lion. Tried to install Mavericks, but it keeps telling me that my disc is used as time machine backup, and cannot install Mavericks, any help appreciated

    I have a 2011 MBP running Mountain Lion. Tried to install Mavericks, but it keeps telling me " cannot install Mavericks because disc is used for Time Machine backup". I tried disabling TM by issuing the command in console " sudo tmutil disable local". Still no luck. Is there a way of erasing all the time machine backups from my system disc?
    Thanks.

    Thanks Matt. I tried erasing the "Backups.backupdb" folder. It does not allow me to do that, inspite of "sudo"-ing. I ended up installing Mavericks on another disc, and use disc migration assistant to transfer my data, before swapping out the old disc from the MBP.
    ST

  • Need to open my keynote 08 files in my iPad2, my MBP runs on OS10.4.11, does it means that i have to upgrade my OS, to upgrade to keynote 09, and then export it to mi iPad?

    I need to open my keynote 08 files in my iPad2, my MBP runs on OS10.4.11, does it means that i have to upgrade my OS, to upgrade to keynote 09, and then export it to mi iPad?

    Bad news...
    Although your answer gave me hope...and so said the Apple website...that i can buy the iWork 09 package in any Apple store, it is not true...
    I live in China...170 km from the closest Apple store...so, i took the train and flew to Apple's Pudong Store...where they told me they don't sell the actual DVD software...just by Appstore...
    So here i am...trying to figure out how to translate my Keynotes from my Tiger OS MBP, to my iPad...
    Is Aple responsible enough to offer software that is not on their stores?...or...not giving me any solution, since i don't own a credir card?...
    So ****** off...
    Anyway..thanks for your reply...as i said...it gave some hope....for a while
    Cheers!
    F.

Maybe you are looking for

  • Difference between types of plan data

    Hi Friends, BPS 1. Cost Center Planning: Costs and Allocations 2. Cost Center Planning: Activity Type Prices 3. Cost Center Planning: Cost Center/Activity Type Prices 4. Cost Center Planning: Cost Driver For the above types of data, I like to underst

  • Problem changing the database in runtime

    We use Crystalreports 10 and CrystalReports 11 using the TCRPE Delphi-VCL-Components (Delphi 2007) I have the following problem: We provide several database-servers: oracle, Mssql and Postgres. We connect to the database via odbc. We prepared some st

  • Create table select option Issue

    I have created a copy of an exisitng table in the database as - create table test1_temp as select * from test1 where 1=2; The table was created w/o data. But the problem is that the indexes and primary key of table "test1" are not copied to "test1_te

  • Cannot create tints in Illustrator CS + printing prob's

    I just downloaded the most recent updates yesterday and now my tint sliders have disappeared. I also cannot print correctly from a native file, I have to save as a pdf and print from Acrobat. I am using a bloody Windows machine so that could be the p

  • CDG-01281 occurs when using qmsolb50.olb in designer 6i

    Hi, We are migrating an application for a client. The application needs to be migrated to designer 6i and is currently build in designer 6.0. The client also uses headstart 50 libraries such the qmsolb50.olb. The problem is, when generating forms con