IAS 10.1.3 on Windows Server 2003, can not run AS Control, pls help..

Hi All,
As part or our POC, we want to test the bandwidth requirement and response time of our ADF Faces + ADF BC application.
Can I use stand alone OC4J for this purpose ?
( the one that comes with JDeveloper 10.1.3, under ../jdev/bin)
How many maximum user can be supported by stand alone OC4J ?
Thank you for your help,
xtanto

This is probably an apache issues. In the
httpd.conf, you can set up your server name with a
specific IP number. I have experience similar issue
before, because my win2003 is atached to a DHCP that
gives a variable IP numbers.Oracle apache configuration uses namebased virtual host options. These cannot be mixed by ip-based virtual host options. So this cannot be the problem ;)
Well it could just be that the server address or
fully qualified domain name were not listed in the
Internet Explorer trusted sites list.And we have a winner. The security for IE on Win 2k3 is absurt. You need to add our local server (fully qualified hostname, not just localhost) to trusted sites and it all works like a charm.

Similar Messages

  • Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

    I read the thread Widows 7 printer
    HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
    as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg). 
    Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
    of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
    XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
    Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
    Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
    NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
    attempted to install the driver, I got the same message stating:
    "The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
    Why aren't there x64 drivers?
    During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
    Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
    Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
    Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
    I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
    Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
    thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
    Andrew*
    P.S. I was advised to come for help here from
    http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

    I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
    I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
    message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
    I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.  
    I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder. 
    I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
    driver' when installing the HP 855c.
    I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
    message (probably the same one mentioned above).
    ; NTPRINT.INF (for Windows Server 2003 family)
    ; List of supported printers, manufacturers
    [Version]
    Signature="$Windows NT$"
    Provider=%MS%
    ; LayoutFile=layout.inf
    ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
    Class=Printer
    DriverVer=10/01/2002,5.2.3790.4533
    [ClassInstall32.NT]
    AddReg=printer_class_addreg
    [printer_class_addreg]
    HKR,,,,%PrinterClassName%
    HKR,,Icon,,"-4"
    HKR,,Installer32,,"ntprint.dll,ClassInstall32"
    HKR,,NoDisplayClass,,1
    HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
     Good luck

  • Installation problem with windows server 2003 64 bit

    I downloaded all hyperion components from e-deleivery for windows server 2003 64 bit when i tried to install it a message said that some component are not compatible when i removed stratigic finance and FDM components the installation started and completed .in the configuration phase many components failed to configured and here's a copy of the log file:
    (Nov 21, 2010, 02:25:51 PM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, The specified database is already configured.
    (Nov 21, 2010, 02:30:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    java.lang.NumberFormatException: null
         at java.lang.Integer.parseInt(Unknown Source)
         at java.lang.Integer.valueOf(Unknown Source)
         at com.hyperion.hit.registry.ServiceComponentImpl.getPort(ServiceComponentImpl.java:45)
         at com.hyperion.hub.HubAppServerDeployer.checkOpenLDAPFromRegistry(HubAppServerDeployer.java:282)
         at com.hyperion.hub.HubAppServerDeployer.updateOpenLDAPPort(HubAppServerDeployer.java:175)
         at com.hyperion.hub.HubAppServerDeployer.preDeploy(HubAppServerDeployer.java:113)
         at com.hyperion.cis.config.AppServerDeployer.preDeploy(AppServerDeployer.java:205)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:604)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Nov 21, 2010, 02:41:18 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:43:35 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:45:21 PM), com.hyperion.awb.config.AWBDBConfigurator, ERROR, Error:
    java.lang.NullPointerException
         at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
         at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
         at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
         at com.sun.org.apache.xerces.internal.dom.ElementImpl.normalize(Unknown Source)
         at com.hyperion.awb.config.PIRegistartionXMLWriter.updateHubDetails(PIRegistartionXMLWriter.java:265)
         at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:249)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Nov 21, 2010, 02:45:21 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    com.hyperion.cis.config.ProcessingException
         at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:275)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
    (Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, Error occured in deRegisterOldProductInstance(): null
    (Nov 21, 2010, 02:47:29 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, There is no logical instance of Shared Services web application in Registry
    (Nov 21, 2010, 02:47:29 PM), com.hyperion.awb.config.AWBAppServerDeployer, ERROR, ERROR:
    com.hyperion.cis.config.AppDeployException: CMS Client cannot be created
         at com.hyperion.awb.config.AWBAppServerDeployer.publishBPMAInstanceDocument(AWBAppServerDeployer.java:704)
         at com.hyperion.awb.config.AWBAppServerDeployer.registerProductInstance(AWBAppServerDeployer.java:796)
         at com.hyperion.awb.config.AWBAppServerDeployer.postDeploy(AWBAppServerDeployer.java:350)
         at com.hyperion.cis.config.AppServerDeployer.postDeploy(AppServerDeployer.java:336)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeAppDeploymentTask(RunAllTasksWizardAction.java:610)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:215)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Nov 21, 2010, 02:50:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:51:11 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:54:20 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:58:04 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:58:16 PM), com.hyperion.essbase.config.EssbaseAgentTaskProcessor, ERROR, Error in executing the script to register Essbase as a service: exitCode = 1
    (Nov 21, 2010, 02:58:54 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:59:15 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 02:59:16 PM), com.hyperion.planning.HspDBConfigurator, ERROR, Error happened: Index: 0, Size: 0
    (Nov 21, 2010, 02:59:16 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    com.hyperion.cis.config.ProcessingException
         at com.hyperion.planning.HspDBConfigurator.configure(HspDBConfigurator.java:209)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Nov 21, 2010, 03:03:06 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 03:05:34 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 03:19:29 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
    (Nov 21, 2010, 03:19:30 PM), com.hyperion.hfm.config.HfmDbConfigurator, ERROR, Error while configuring HFM DatabaseEntry does not exist for these parameters in tnsnames.ora file.
    (Nov 21, 2010, 03:19:30 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    com.hyperion.cis.config.ProcessingException
         at com.hyperion.hfm.config.HfmDbConfigurator.configure(HfmDbConfigurator.java:151)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Nov 21, 2010, 03:19:39 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    java.lang.NullPointerException
         at com.hyperion.hfm.config.HfmAppServerTaskProcessor.execute(HfmAppServerTaskProcessor.java:105)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeCustomTask(RunAllTasksWizardAction.java:741)
         at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:188)
         at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    if any one installed hyperion EPMS on windows server 2003 64 bit please i need your help
    thanks in advanced
    Edited by: eng3m on Nov 21, 2010 3:32 PM

    Hi,
    EDGE/Crystal Reports Server and Enterprise are no native 64bit applications. That does mean that they only run in 32bit mode. But you can install it on a 64bit hardware with a 64bit OS.
    Regards
    -Seb.

  • MSI TV Card doesn't work in Windows Server 2003 !!!

    Hi All,
    I have bought a MSI TV Tuner (TV @nywhere series)
    I Installed it on Windows XP and it works properly.
    But I Installed it on Windows Server 2003 and noticed that it's not working at all !
    It's TV Tuner , however, doesn't work good (It has a weak receiving power). I'm using it as a Radio (MSI Radio). But even the Radio is not working under Windows Server 2003.
    I want to know what's the problem ? What Driver should I use ?
    I have Installed the same driver in Windows 2003, Because there isn't any Windows 2003-specific driver included in the CD-ROM of this package.
    Please guide me what should I do. I need Windows Server 2003 to be my OS. I want to know if this TV Tuner isn't supposed to work on Windows 2003 Server ? It's only desingated for Windows XP and prior ? What's the solution ?

    Quote from: sma_soft on 27-August-06, 14:34:43
    Hi
    what a pitty !
    You are a known company and you DON'T KNOW !! if your hardward can work in Windows Server 2003 or not (:|
    Or maybe you don't assume Windows Server 2003 as an Operating System !
    Also I checked the TV Tuner Driver Pages in your site, but I found that you don't have ANY driver for Windows Server 2003
    It's exactly the driver I have on MSI CD-ROM. As you can see above, it's telling There's no support for Win2003 !!!
       Your System OS Win9X/ME/2000/XP(22710KB)   
    Now you see ? Even in the manufactory you haven't tested and it was not important for this comany if their hardware can or cannot work on Win2003.
    Maybe you have designed it especially for Windows XP and prior.
    I JUST WANT TO KNOW THIS !!!
    bye
    OT:
    @sma_soft,
    Hi sma_soft! As the title of this site says: "MSI HQ User to User Forum". As I understand, we are all the same here. That we are all MSI product users and customers in this forums.
    Read the article below that I got from here for you to be able to understand what I meant. You will see this article on the upper portion of every page of this forum. Just scroll upward.
    "News: For your information, the MSI Forum Team is not paid by MSI.
    The entire forum is run by volunteers that like yourself, enjoy MSI's products.
    This forum is independent and not regulated by MSI, but the MSI Forum Team will try to assist you with any problems you have with MSI products.
    Just remember, there are no MSI employees present here!"

  • MS14-044 for SQL Server 2008 Standard on Windows Server 2003?

    MS14-044 was recently released and states that it applied to MS SQL Server 2008 SP3, yet the patches available for this security bulletin do not list Windows Server 2003 in the supported operating systems. Does MS14-044 not apply to SQL Server running
    on Windows Server 2003? If it does apply, why isn't there an update available to run on Windows Server 2003?

    Hi Chasg76,
    According to your description, the patches available for MS14-044 do not list Windows Server 2003 in the supported operating systems and you want to know whether MS14-044 applies to SQL Server running on Windows Server
    2003.
    Based on my test, KB2977321 applies to SQL Server 2008 Service Pack 3 product and it does apply to SQL Server 2008 SP3 running on Windows Server 2003.
    I installed SQL Server 2008 Service Pack 3 in Windows Server 2003 SP2 x86. After the service pack 3 installation completed, KB2977321 was offered in the Automatic Update.
    Besides, you can manually install the update by downloading the update form the Download Center web site as well.
    I also tried the manually installation and I downloaded the Security Update for SQL Server 2008 Service Pack 3 (KB2977321) from this web: Security Update for SQL Server 2008 Service Pack 3 (KB2977321) (https://technet.microsoft.com/library/security/MS14-044),
    it was installed successfully.
    After installed security upgrade, I checked the file attributes and compared to this article: MS14-044: Description of the security update for SQL Server 2008 SP3 (GDR): August 12, 2014(http://support.microsoft.com/kb/2977321/en-us).
    The result is the same.
    According to my test, MS14-044 applies to SQL Server running on Windows Server 2003 even though Windows Server 2003 is not listed in the supported operating systems.
    Best regards,
    Qiuyun Yu

  • Question about locking down IIS on an SCCM 2012 distribution point on a Windows Server 2003

    Hello. My environment is SCCM 2012 SP1. I will be setting up several distribution points on Windows Server 2003 machines. This summer I have a project to configure SCCM to use our PKI infrastructure. Unfortunately, this will not be in place before I need
    to set the Windows Server 2003 machines up as distribution points. I am not an IIS expert. When I set the DPs up, I am only 1)Installing IIS, 2)Enabling BITS extensions, and 3)Enabling WebDav. Is there anything I should do to ensure they are as secured as
    possible?

    I would say that installing Windows Server 2003 is not "as secure as possible" due to it's end of support coming soon.
    http://support.microsoft.com/lifecycle/default.aspx?LN=en-us&p1=3198&x=10&y=12
    And I would say that we need more information about your scenario to tell you how it is as secure "as possible". Since that would be shutoff at the bottom of the ocean. But that wouldn't be that useful server.
    Im guessing that you will run these servers for internal
    clients ONLY. And that you have a decent edge protection as well as physical protection. Then I would start by having the lastest secrutiy patches, running antivirus software and having the firewall turned ON. I would make sure that
    only necessary logons would be possible and that the servers wouldn't cache any credentials. Typically a DP NEVER holds sensitive data so no real need to secure them more than that in a normal scenario if you ask me.
    A final notice, this is a baseline
    for a common scenario. You would need to scale and change that
    in order to apply for your scenario.
    Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa

  • Connecting iPads to an Enterprise Wireless 802.1x (EAP-TLS) Network Using Windows Server 2003 IAS

    Hi there,
    I am asked to deploy iPads on an 802.1x EAP-TLS WiFi network. The customer has a Windows Server 2003 IAS server providing RADIUS. There also is a Windows based CA infrastructure in place. This solution is in production and is already being used by other wireless devices. Could someone please highlight the configuration steps for the iPad deployment? The customer whishes to automate the initial deployment and the renewal of the certificates. I have a basic understanding of 802.1x, RADIUS, Certificates etc. in a Windows infrastructure but I am new to enterprise deployment of iPads. There is no MDM tool in place by the way...
    I did find a Microsoft article which I think describes what needs to be done: http://blogs.technet.com/b/pki/archive/2012/02/27/ndes-and-ipads.aspx. This article basically states the following steps:
    1. Create a placeholder computer account in Active Directory Domain Services (AD DS)
    2. Configure a Service Principal Name (SPN) for the new computer object.
    3. Enroll a computer certificate passing the FQDN of the placeholder computer object as a Subject Name, using Web Enrollment Pages or Certificates MMC snap-in directly from the computer (Skip step 4 if you are using the Certificates MMC snap-in)
    4. Export the certificate created for the non-domain joined machine and install it.
    5. Associate the newly created certificate to the placeholder AD DS domain computer account manually created through Name Mappings
    The article then elaborates on specific steps needed for the iPad because it treats all certificates as user certificates. Can someone confirm this behavior??
    Regards,
    Jeffrey

    Use VPP.  Select an MDM.  Read the google doc below.
    IT Resources -- ios & OS X -- This is a fantastic web page.  I like the education site over the business site.
    View documentation, video tutorials, and web pages to help IT professionals develop and deploy education solutions.
    http://www.apple.com/education/resources/information-technology.html
       business site is:
       http://www.apple.com/lae/ipad/business/resources/
    Excellent guide. See announcment post -- https://discussions.apple.com/thread/4256735?tstart=0
    https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
    good tips for initial deployment:
    https://discussions.apple.com/message/18942350#18942350
    https://discussions.apple.com/thread/3804209?tstart=0

  • Phonefactor with RRAS(Windows Server 2003) - VPN client timeout after 20 seconds -- too fast!

    [Note that I have previously posted this question on Experts Exchange... but have not found a solution yet].
    We are a small business and would like to switch to two-factor authentication for VPN connections. We spent nearly a year helping Barracuda debug their small business VPN appliance and finally they took their boxes back and gave us back our money - they
    just couldn't get file sharing to work consistently with some new firmware they had to install due to a patent case.
    So... now we are trying Phonefactor.
    Our VPN setup is RRAS on a Windows Server 2003 domain controller.
    We have installed Phonefactor, enabled it as a Radius server, and configured RRAS to point to Phonefactor for Radius authentication. We configured phonefactor to send text messages for authentication, as we figured that would be less disruptive than a phone
    call.
    It all works except... the timeout for VPN clients is only 20 seconds! By the time we receive the text message on a cell phone, sometimes there is only 5 or 6 seconds to get the six digit code typed into a reply on the cell phone... and unless we are really
    nimble, that is frequently not enough time!
    When the VPN client times out, it gives an Error 718 "The connection was terminated because the remote computer did not respond in a timely manner."
    How can we increase the timeout on the VPN clients, so we can more reliably enter the authentication code in a reply back to phonefactor?
    Things we have tried:
    1) Connecting (PPTP) from different Windows clients to see if we get different timeout limits. So far we have tried several Windows 7 boxes and a Windows Server 2003 as the client, but in all cases the timeout is 20 seconds.
    2) On the windows clients: Searching through the PPTP client settings to see if there is one labeled "connection timeout". So far we have found nothing.
    3) On the windows 2003 server: Modifying the RRAS Radius Server time-out to be 30 seconds, 60 seconds, 300 seconds. We've tried restarting RRAS after these changes, but the client connection timeout is still 20 seconds.
    4) In the phonefactor configuration: Searching through the radius server settings to see if there is one labeled "connection timeout". So far we have found nothing.
    5) Using NTRadPing to connect directly to the phonefactor radius server. With NTRadPing we were able to wait more than 60 seconds without a timeout from phonefactor. So we don't *think* at this point that the issue is within phonefactor.
    6) We have asked phonefactor support, but their response is "hmmm... good question, we don't know, that sounds like a problem with your vpn client". And they could well be correct.
    7) Search the web for how to increase either the stock windows VPN client timeout, or the RRAS radius authentication timeout. No luck so far.
    8) Try this registry hack:
    http://windowsitpro.com/networking/solving-ras-718-error. Didn't help.
    Any ideas?
    thanks!

    Hi fdc2005,
    Thanks for the post.
    However, generally, we first type User Name, Password, then click connect to establish the VPN connection. Such as:
    Therefore, I have a little confusion about the timeout you mentioned. Would you please provide us more details.
    Regarding error 718, please check if the following could help:
    If you have a third-party VPN server which does not support MS-CHAPv2 as an authentication method and supports only MS-CHAPv1, you will need to use either CHAP or PAP to connect from the Windows Vista VPN client until the server you use starts supporting MS-CHAPv2.
    Steps to follow for resolution:
    (1) Check if the Routing and Remote Access Server (RRAS) is configured to allow connections with MS-CHAPv2
    (2) Check if the RADIUS server policy supports MSCHAPv2 (This step is needed if you control access to clients using Remote Access Policies on the IAS/NPS server)
    Quote from:
    Troubleshooting Vista VPN problems.
    Hope this helps.
    Jeremy Wu
    TechNet Community Support

  • I am trying to remote into a Windows Server 2003 from a Windows 7 machine and having issues

    I am trying to remote into a Windows Server 2003 from a Windows 7 machine.  It says "The terminal server has exceeded the maximum number of allowed connections".
    My first stop in trying to solve this problem was here:
    [URL="http://www.howtogeek.com/howto/windows/command-line-hack-for-terminal-server-has-exceeded-the-maximum-number-of-allowed-connections/"]howtogeek.com[/URL]
    And it says:
    [I]
    [INDENT]This problem happens because Windows only allows two remote terminal services connections when you are in administrative mode, and you’ve either got two people already on that server, or more likely, you’ve got a disconnected session that still thinks
    it is active.
    The problem with this error is that you have to actually get on the server console to fix the problem if the server isn’t in a domain. ([B]If you are in a domain, then just open Terminal Services Manager and log off or disconnect the sessions[/B])[/INDENT][/I]
    So it seems to suggest that all I have to do really is to run the  Terminal Services Manager but I cannot find it.
    This web site from mssqltips.com [URL="http://www.mssqltips.com/sqlservertip/1981/remote-desktop-error-terminal-server-has-exceeded-the-maximum-number-of-allowed-connections/"](click here)[/URL] says all I need to do is first execute "mstsc /
    admin" from the command line.  But, when I do that, I get a message when I try to remote to the server, that says this: "To log on to this remote console session, you must have administrative permissions on this computer".
    So, what now?  What do you suggest?

    Hi Bobby,
    Yes, it is by design. By default, Windows Server only accepts two concurrent administrative sessions (Administrative Mode). It means that only two administrators can work on the server at
    the same time.
    If you would like more concurrent sessions, you need to purchase RDS CALs, install Terminal Services related server roles with proper configurations on the server.
    Remote Desktop for Administration (server 2003)
    http://technet.microsoft.com/en-us/library/cc785186(v=ws.10).aspx
    What Is Terminal Services?
    http://technet.microsoft.com/en-us/library/cc782486(v=ws.10).aspx
    Terminal Services Configuration
    http://technet.microsoft.com/en-us/library/cc787078(v=ws.10).aspx
    Purchase client access licenses
    http://technet.microsoft.com/en-us/library/3660ac5a-7468-48d3-b7e8-5529de8fb6c5
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Add-on installation problem in Windows Server 2003

    Hi guys,
    I have a problem when i want to install my add-on in the Windows Server 2003. The server gives me error :
    Unable to load AddOnInstallAPI.dll
    and when i try install using the same installer at the client station, everything is ok.
    Does anybody have suggestion about that problem? I suspect the problem is the Windows' security that did not allowed me to load the .dll. Does anybody know how to set the security?
    Thanks you,
    Harianto Ng

    I've found an answer on the similar question here, on the forum, saying that Windows 2003 is not a supported SAPBO Client OS.
    In my experience I could not even set a reference to SAPbouicom.exe with a message "cannot load DLL"...
    Natalya

  • Java2SDk 1.4.2.06 installation problem on Windows Server 2003

    I tried the installation of Java2SDk 1.4.2.06. ,I tried this, but it fails to complete and NO directory folder is created so I cannot continue with the proccess. The OS is Windows Server 2003.
    I have done the following procedures:
    Enabled/Disabled the IIS configuration
    Enabled/Disabled the Windows Firewall
    Enabled/Disabled Antivirus software
    The error in the event log is:
    Event Type: Error
    Event Source: Application Error
    Event Category: (100)
    Event ID: 1000
    Date: 3/6/2007
    Time: 2:23:49 PM
    User: N/A
    Computer: GERSSERVER
    Description:
    Faulting application msiexec.exe, version 3.1.4000.1433, faulting module unknown, version 0.0.0.0, fault address 0x0013b43e.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 41 70 70 6c 69 63 61 74 Applicat
    0008: 69 6f 6e 20 46 61 69 6c ion Fail
    0010: 75 72 65 20 20 6d 73 69 ure msi
    0018: 65 78 65 63 2e 65 78 65 exec.exe
    0020: 20 33 2e 31 2e 34 30 30 3.1.400
    0028: 30 2e 31 34 33 33 20 69 0.1433 i
    0030: 6e 20 75 6e 6b 6e 6f 77 n unknow
    0038: 6e 20 30 2e 30 2e 30 2e n 0.0.0.
    0040: 30 20 61 74 20 6f 66 66 0 at off
    0048: 73 65 74 20 30 30 31 33 set 0013
    0050: 62 34 33 65 b43e
    Please advice on this problem. Other tech support recommendations were to reinstall the OS.
    I have also tried installing the latest version of Java 2 SDK without success.
    Thanks for your support
    William Hernandez
    UPR-Mayaguez Campus

    Thank you so much for your help!
    I have just tried as you said. Now I see that actually at the beginning of the intallation, there is a NullPointerException. Here is the error information:
    ===============================
    Checking available disk space...
    Checking Java(TM) 2 Runtime Environment...
    Launching Java(TM) 2 Runtime Environment...
    java.lang.NullPointerException
    at sun.java2d.SunGraphics2D.revalidateAll(SunGraphics2D.java:2086)
    at sun.java2d.SunGraphics2D.drawString(SunGraphics2D.java:2536)
    at com.sun.wizards.awt.Header.paint(Header.java:112)
    at sun.awt.RepaintArea.paint(RepaintArea.java:177)
    at sun.awt.windows.WComponentPeer.handleEvent(WComponentPeer.java:260)
    at java.awt.Component.dispatchEventImpl(Component.java:3678)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
    read.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    ===============================
    Please help me out of this. Thank you.

  • HP Cloud Print Driver for Windows Server 2003?

    Hello,
    I have a unique (complicated) situation that I am trying to find a solution for.
    Here is the deal,
    My company is trying to set up a temporary remote branch location inside a building where we are unable to wire a network. Our solution is to use a wireless hotspot. Connected to this hotspot, we will have an iPad and an HP Laserjet M525.
    The iPad will be connecting to our Citrix environment over VPN through Citrix Receiver to deliver a desktop interface to the iPad. This is needed to access a few applications that are used at the branch.
    The problem now is printing, AirPrint wont work because the iPad is on VPN (and its at a windows interface, not the iPad's).
    I had the idea of using the HP printers built in ePrint function to print, so I set that up. So now sending at email to [email protected] prints to the HP printer attached to the wireless hotspot.
    Emaling to print works, but ideally, I would like this printer to show up in the Windows Devices and Printers, so that the user can just click print, choose the HP printer, and it will print, (with a delay obviously as its sending an email).
    So I downloaded the HP ePrint Windows Driver, which has to be installed on the main Citrix servers so that the users session can grab the printer and use it, turns out the driver doesnt work on Windows Server 2003. 
    My first attempt at a workaround was Google Cloud Print, which was fairly simple to connect to HP ePrint, but apparently the Google Cloud Print Driver doesnt work on Windows Server 2003 either.
    Is there a version of the HP ePrint Driver out there that works on Windows Server 2003?
    tldr:
    I would like to print to a remote HP printer that is connected to a wifi hotspot from our internal network. I need whatever software I download to be compatible with Server 2003.
    I understand this is over complicated but thanks for any input.

    I believe I understand your issue.  You would like to use a print driver to print to your HP ePrint enabled printer from your apps that are hosted by Citrix server.  While I believe this makes perfect sense, HP does not have a print driver that officially supports MS TS or Citrix that also supports the ePrint Cloud path.  The reason for this is the ePrint windows driver is a "dynamic" print driver (similar to HP UPD dynamic mode) that handles multiple print paths (tcp/ip, wireless direct, cloud, etc) in a single driver instance by dynamically changing the port the print queue is bound to so the port is specific to the delivery path.  For example, if printing to a network printer it will use a MS Standard tcp/ip port.  If printing to the ePrint cloud a custom port is used, etc.  Well, if you have lots of Citrix users trying to print to a single print queue, but to different destinations, the users would be colliding with each other when they print by having the driver trying to change the print queue to different print ports at the same time.
    What you could do is install an ePrint print queue on the citrix server if you can control the access to that queue to just your local branch users.  Also, if you only have on ePrint enabled printer the situation is even better as only one port will be needed by that queue.  You can find the ePrint software at www.hp.com/go/eprintsoftware   You might want to download the version of the driver that supports XP as Windows 2003 is very similar print system.
    NOTE:  this is not a supported environment for this driver.  You would be using it without warrenty or support and no promises are being made here.
    Good luck if you choose this path and please post back the results.  Thanks!

  • Windows Server 2003 No Mouse or Keyboard

    Hi,
    After a hard reboot (accidentally being unplugged) I have no mouse and keyboard input. I am stuck on the Login Screen. I am using a hard wired USB keyboard and mouse and I don't have a PS/2 on the computer. Accessing the computer remotely is not an option
    because I can't login to start any programs.
    Thanks

    You might try a repair install.
    How to Perform an In-Place Upgrade of Windows Server 2003
    How to integrate Windows Server 2003 Service Pack 2 files into the Windows Server 2003 installation folder
    If the media is lost.
    How to replace Microsoft software or hardware, order service packs, and replace product manuals
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Access windows server 2003 from a local user machine (windows 7 pro)?

    Is there a way to look up user accounts from a local machine running windows 7 pro without having to always go to the physical server itself?
    The reason is the location of the server, a bit of an inconvenience.
    It's a windows server 2003 btw.
    Thank you,
    Cris

    Hi,
    Thank you for posting in Windows Server Forum.
    Good to hear that you go it working.
    In respect to your another question, it seems that you want to have with smart card technique for password without entering manual credential. Please check following article for information.
    Smart Card and Remote Desktop Services
    http://technet.microsoft.com/en-us/library/ff404286(v=WS.10).aspx
    Guidelines for enabling smart card logon with third-party certification authorities
    http://support.microsoft.com/kb/281245
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

    I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

    I may be way out, but do you know about this product, would it help integrate the Macs for you.
    https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

Maybe you are looking for