IAS-39: looking for info
Hi.
We are looking for info regarding what type of support do SAP gives for this IAS rule.
So far we saw that this rule is supported in the Tresurey module and we are looking to avoid implementing this module.
thanx.
ayal.
Hi Ayal,
you can find some information by using the SAP Service Marketplace.
If you follow this link:
https://websmp105.sap-ag.de/ias
You will be led to the IAS/ IFRS information page.
The information regarding IAS39 you will find within the media library.
Kind regards
Thomas
Similar Messages
-
Looking for info on the msi 970 gaming .
Looking at the msi gaming 970 as a GPU. I know about the ram issue. Looking for info about the card in general (persons perspective ). Like how does it overclock, cooling, bios updates, warranty and so on.
My specs
4790k-4.0
gigabyte z97 black edition MB
8gb gskill
WD valaciraptor HD
Thanks.Cooling: It has very good cooler (better than 780Ti which I own) so surely low temps (<70C with fans 35%~ )
OC: It's a gamble. One can overclock better than the other
Warranty: As far as I know, 1 year with seller and further 1 year directly with MSI
BIOS updates: it's new card so rarely any updates right now, but there are some if something is being fixed/improved.
Should work fine in your system, no bottleneck with i7 4790
Just depends if you look at reference design or Gaming series. -
Looking for Info on MSI G31M3-F
I'm looking for anyone who's using a G31M3-F. It seems like a great budget board for someone who wants to reused DDR2 mem and a Pent. D processor, but there's virtually no info on it. Is it good for OC? How long has it been out? I can only find 4 reviews from newegg. I don't do a lot of gaming but do place WoW from time to time. The X3100 should handle that just fine.
The one question I have is that I've heard that if you ever plan to put a descrete video card into a Mobo, you should never get one with an IGP. Is there any truth to that?Hello LoopFree,
Quote
but there's virtually no info on it.
What kind of info are you looking for? For board specifications and processor & memory support information you can look at the product site(s):
G31M3-F
--> http://global.msi.eu/index.php?func=proddesc&maincat_no=1&cat2_no=170&prod_no=1470
G31M3-F (FSB 1600)
--> http://global.msi.eu/index.php?func=proddesc&maincat_no=1&cat2_no=170&prod_no=1590
G31M3-F V2 (3 Audio Ports)
--> http://global.msi.eu/index.php?func=proddesc&maincat_no=1&cat2_no=170&prod_no=1573
G31M3-F V2 (6 Audio Ports)
http://global.msi.eu/index.php?func=proddesc&maincat_no=1&cat2_no=170&prod_no=1574
Note that not all Pentium D models are supported on all G31M3-F boards and that you will need DDR2-667 or DDR2-800 modules. DDR2-533 (and lower) modules are not supported.
Quote
How long has it been out?
Not sure, first or second quarter of 2008 if I am not mistaken. The earliest official BIOS Releases are from March 2008.
Quote
The one question I have is that I've heard that if you ever plan to put a descrete video card into a Mobo, you should never get one with an IGP. Is there any truth to that?
The mainboard should work fine if you add a stand-alone graphics card, if that is your question. Check the test reports that can be accessed via the product site(s) for tested video cards.
Quote
Is it good for OC?
To a certain extent, maybe, but as it is a budget board with a budget board BIOS, don't expect miracles. -
I found this article when searching for info on restoring (to factory conditions) an iPod Touch 4th Generation. Now I thought this shipped with iOS 5.x (x unknown). But as mentioned too briefly in the header, when I click 'Restore' in iTunes, it offers not to restore, but to update. That is not what I want. I need to use this iPod Touch with Xcode 4.2 under Snow Leopard.
So the question is: what is really going on here and why? Is it really true that 4th G iPod Touches ship with 6.0.1 instead of 5.x? If not, how can I get it to really go back to the original? Why is iTunes failing to offer a restore when I press 'Restore'? If I guessed wrong about which of my several machines running iTunes (some under Windows7, one under Snow Leopard)I used when I upgraded to iOS 6.0.1, would that explain iTune's failure to offer a true Restore?Restore will not replace an old iOS level. It will update the iOS level to the latest level. If you have to restore youre iPod that is what will happen. The iOS is not a part of a backup.
-
i pulled this card out of a computer, its a sound blaster li've modem SB0060, looking for any information i can get on it
thanks
Message Edited by Kiaser on 09-07-2005 0:36 PMKiaser,
I thought that I had in the previous post, but here is some more information on it:
The card is a Li've! 5. (referred to as the Li've! Player 5. in some places).
Here is a page that links to all the information about the card you should need:
http://us.creative.com/support/kb/ar...p?l=2&sid=5805
This should include information and troubleshooting for the card.
JeremyMessage Edited by Jeremy-CL on 09-08-2005 2:45 AM -
Portals best practices - looking for Info
Looking to learn on what I should and should not try to do with portals. What
sort of UI designs are encourages and what's discouraged.
Does anyone have any helpful links or book resources to recommend? Thanks.Thanks, Sameer. I am a little past that point. I have already looked at much
of the documentation on BEA site and even threw together a few prototype portals.
Now I'm looking for portal UI guidance and recommendation. Something along the
lines of use frames or don't use frames, which attributes of a web application
make it particularly suitable or not suitable for a portlet, etc. Thanks again.
Vadim
Sameer <[email protected]> wrote:
http://edocs.bea.com/wlp/docs81/index.html - can get you started.
Vadim wrote:
Looking to learn on what I should and should not try to do with portals.What
sort of UI designs are encourages and what's discouraged.
Does anyone have any helpful links or book resources to recommend?Thanks. -
Looking for info on CVE-2015-0235
Hello,
I'm looking for information on CVE--2015-0235 or GNC C Library (glibc) Remote Code Execution Vulnerability.
I would like to see if the affected program is on my servers and if so is Solaris 10 effected?
Any help would be greatly appreciated.
ThanksWe don't ship glibc with Solaris
-
Looking for info on "test wlan dot1x radius" command
Is there a way to perform RADIUS connectivity and optionally basic auth testing, without a client?
I see the "test wlan dot1x radius" command in the CLI which looks promising, but I can't find any info on it.
The "test ..." commands aren't in the Command Reference (?!)
Can anyone provide any info on how the above command works (if at all)
Thanks in advanceFor testing radius, I use NTRadPing. Might be a better option for you.
http://www.novell.com/coolsolutions/tools/14377.html
Sent from Cisco Technical Support iPhone App -
Z10 Looking for info on warranty on an eBay bought phone
Device info
Your carrier:
Model: z10
OS Version: 10.1.0.4181
Apps and free space
File free before and after a battery remove/replace. (Go to Settings, then Options, then status): 16GB Total space, 3.3 Free space. After removal of battery: Exact same
Did a battery pull fix your issue?
Apps installed and their version if possible. (Go to Settings, then Options, then applications)on't believe apps shoulf have an affect on this... However, all original apps are still on the device and I have Alien Flow, BBSensors, BeBuzz Pro, Flashlight Free, HUB++, Skooday, SoundHound, Skype, Run In Crowd, Crackle, Amazon Kindle, GasBuddy, Remember the Milk, and Evolution Browser
BT device model/version (you will have to look at the BT device):?
When writing your question
Any other details that would help us out with your issue: -- I'm from Ontario, Canada.
Alright, so. I bought this phone off of eBay and it was originally with Rogers, I believe. The seller said it was unlocked and after I contacted them saying that it had Rogers information in it they paid for the unlock code so I could go with Telus, I never set anything up with Rogers. Anyways, the phone started malfunctioning around 2 months ago just been too busy to do anything about it. Malfunctioning as in.. Slow battery recharge with the original cable to the computer or to the wall connector. Also, the accelerometer appears to be broken as it no longer goes to landscape mode on any app or in the hub, youtube, etc. I've made sure the lock is not on, I've done multiple battery pulls, I've done multiple wipes of the device and started from fresh around 3 times. Okay, so now. I just recontacted the seller and they said to go to Telus but Telus doesn't have any information (warranty) on their system on the phone since it wasn't orignally bought from them, so they said to contact the original seller again and they're going to give me the original purchase info and all that paraphernalia. I was wondering, how will I go forth with a warranty from BlackBerry? If I can't go through my phone provider :s. Anyways, hopefully I explained that well enough. Thank you for your help! Also, if I'm missing something with the accelerometer please let me know! I miss youtubeExplained well enough, but unfortunately you purchased a used device, not from an authorized seller, meaning there is very likely no warranty.
All your description sounds like software faults. I'd wipe again and reload the OS.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Looking for info on Infiniband compatibility
Hello,
Posting in this forum because the Networking forum seems dead.
I've searched high and low, and I can't seem to determine whether or not the newer Mellanox HCA's such as the ConnectX-3 are compatible with Solaris. Specifically, I'm looking to integrate with Comstar and export zpool-based SRP targets. Not concerned with IP use at all, really.
I have read that the Hermon driver supports the ConnectX-2, but can't confirm it works with ConnectX-3.
Mellanox and Oracle support aren't giving me much info... Mellanox said Oracle is responsible for the drivers, Oracle sales/support sent me here since I don't currently have a support contract.
Any ideas?
Thanks!Funny this question just came up internally and the response was to check with Mellanox on which cards work with Solaris.
I checked the Mellanox OS/support page here and Solaris 11 is not even listed:
Mellanox Technologies
I would ask them to update this page for current Solaris 11 releases.
Not a great response. I hope someone in the community can comment.
Thanks, Cindy
Message was edited by: cindys
I will find a Mellanox contact through the Solaris ISV team to see if we can get them to update their support page with current Solaris support info and to include the Connectx 3 card. -
Looking for info on Blackberry Curve 8330
Hello,
I'm new here, but I have a question. I'm looking seriously at upgrading from the my LG enV phone to a Blackberry Curve 8330. My quesiton is, is it true that you can not use the phone for calls, web surfing or email while it is charging? Other than that it seems like a wonderful phone.
Thanks for any help.
George
Solved!
Go to Solution.pickerman wrote:
My quesiton is, is it true that you can not use the phone for calls, web surfing or email while it is charging? Other than that it seems like a wonderful phone.
eh? No, that is not true.
While charging either to a wall outlet, automobile charger or the USB cable to the PC, the device is perfectly usable for ALL functions.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi,
I'm using Sun-Java(tm)-System-Directory/6.3.1.1.1 on Solaris 9 with two server configured in multi-master replication
For a few time I receive those warning in the error logfile :
[14/May/2012:06:18:40 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nabcdycn, ou=People, dc=example,dc=com"
[14/May/2012:06:18:40 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nabcdycn, ou=People, dc=example,dc=com"
[14/May/2012:06:19:11 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nefghzer, ou=People, dc=example,dc=com"
[14/May/2012:06:19:11 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nefghzer, ou=People, dc=example,dc=com"
[14/May/2012:06:20:44 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nijklkkh, ou=People, dc=example,dc=com"
[14/May/2012:06:20:44 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nijklkkh, ou=People, dc=example,dc=com"
and I would like to know what's going up and what I should do, so in case somebody have some infos about it, I would be very interrested.
I'm trying to find a way of veryfing fragmentation of the backend, but not sure about this.
TIALooks like the attribute sunIdentityServerDiscoEntries is defined twice in the schema. Run the following and see where it is defined for the second time.
# cd /var/opt/SUNWdsee/dsins1/config/schema
# grep -w sunIdentityServerDiscoEntries *.ldif | grep -iv objectclasses
Edited by: etst123 on Mar 3, 2009 1:28 PM -
Looking for info about CallRouter experience
Hi All,
I need the equivalent of Tuxedo's data dependant routing feature with my
Weblogic Server application (based on EJBs). After reading the
documentation, I found that in a clustered configuration, one could
implement a router class (which implements the CallRouter interface) to
route method calls to a given instance based on a parameter value.
Has anyone had experience with this feature? Is this solution totally
transparent to the client and server application?
Any info is appreciated...
Thanks
Jean Andriamalala
Hello Arya
This is the right question for Toshiba repair centre (authorized service partner). You will be very lucky if someone here can give you proper answer. Before you wait here try to call service partner and I hope they can help you. The addresses you can find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true -
Where to look for info about creation of a complex web site ?
I'm more of an artist and graphic designer than web site creator but one of my clients now want to have what I believe is a very complex enterprise level web site for e-commerce.
They have a fairly clear idea in terms of user experience and features and I can help them with the graphic design part of it but they and I have no idea what it would take and how much it would cost for the development. I would like to know how to find this information and will appreciate any advice and tips for selecting developers.function(){return A.apply(null,[this].concat($A(arguments)))}
function(){return A.apply(null,[this].concat($A(arguments)))}Nancy O. wrote:
I think that at least there must be a project manager that have some view over all aspects of the project and such person should at least have a basic idea about each aspect and skills required.
Yes. The Project Manager is the lead team member responsible for the following key areas.
Project Management -- fact finding, plan development
Domain name registration
Server hosting
Site concept -- flowchart
Photographer
Videographer
Video Editor
Graphics designer -- logo, artwork, etc...
Design Concept -- PSD
CSS - from design concept to workable layouts for VARIOUS web devices.
Web Media specialist -- slide shows, audio/video, podcasts, etc..
Front end developer
Back end developer
Content copywriter/editor
Language translators
Search engine optimization
Web Accessibility specialist
Keyword advertising
Content updates -- in house staff trained to use the CMS and pull orders off e-comm system.
Site/server maintenance -- file/database back-ups, security upgrades, restores files if server is compromised, etc...
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
"Oh my God"
Much of this stuff, I have never hear about it.
I'm so glad that I have learn to keep my mouth shut, and don't bit more that I can chow.
In the past, I would LOVE to "explain" to people, how much this or that may cost, and
how difficult will be to make, NOT KNOWING WHAT I WAS TAKING ABOUT
"Oh My God"
Thanks heaven I don't NEED to do that anymore.
emil emil wish you the best, and I will try to contact who ever build the BestBuy web, Target, Cosctco, or Adobe website and "see" about the price.
Saludos
Daniel Ulysses -
Looking for info on Image Units
Does anybody know of a resource that explains motions Image Units more indepth? I notice its the only category in the library that doesn't give you a preview of the effect. Just wondering if this info is complied somewhere so i don't have to try each and everyone to figure out what they do.
thankshttp://en.wikipedia.org/wiki/Core_Image
Maybe you are looking for
-
Platform: SUSE 10.1 Linux Problem: Installed XE (not supported, I know, but install 'seemed' to go ok). The 'Go To Database Home Page' uses a URL like the following: http://localhost/apex. There is no such beast installed and consequently I can't wor
-
How do you pan and/zoom an image--the "Ken Burns" effect?
How do you pan and/zoom an image--the "Ken Burns" effect?
-
My laxmark wifi printer and iPad2 can't get married, what to do?
My laxmark wifi printer and iPad2 can't get married, what to do?
-
When downloading an app my ipod keeps asking me to answer 3 security questions
When downloading an app, my ipod keeps asking me to answer 3 security questions but will say they are not correct
-
Hi, I'm new to JDeveloper and UML and I'm wondering if the following is possible or even makes sense. Is it possible to link or "drill down" from a Use Case Diagram into a Class Diagram? I like the way I can publish a Use Case Diagram to HTML and it