IAS does not start when using SSL

Hello all,
I hope I hit the correct board for this question and search did find anything useful for my Problem.
We have a couple of Oracle Databases which are using IAS to serve a PL/SQL and Perl based WepApp. The Databases are 10g (10.2.0.3), and the Servers are running Novell SLES 9 x86_64 (SP 3). We need https on these Machines, so I configured the Server for SSL, created a Certificate using Wallet Manager and so on, exactly as described in the Documentation.
However when I try to start the HTTP Server with "ssl-enabled" in opmn.xml to enable SSL it does not start any more. It simply cannot load the "mod_ossl.so" Library:
Logfile says:
/opt/oracle/product/10.2.0/http_1/Apache/Apache/bin/apachectl startssl: execing httpd
Syntax error on line 246 of /opt/oracle/product/10.2.0/http_1/Apache/Apache/conf/httpd.conf:
Cannot load /opt/oracle/product/10.2.0/http_1/Apache/Apache/libexec/mod_ossl.so into server: /opt/oracle/product/10.2.0/http_1/Apache/Apache/libexec/mod_ossl.
so: undefined symbol: dbm_firstkey
I have googled and searched Metalink but did not find anything useful. I assume that "dbm_firstkey" refers to the GNU database routines (gdbm), but I am kinda stuck right now. Has anyone stumped upon this maybe?
Kind Regards
Maik

Two issues:
- this does not look like OracleAS, but like the HTTP Server from the database;
- you seem to be loading a 32 bit process (apache/httpd) into a 64 bit shell.
try starting it within 'linux32 bash' instead.

Similar Messages

Outlook 2010 -Mailbox Cleanup wizard does not start when using cached mode

We are using Outlook 2010 with Exchange 2003 server.
Currently all users are using online mode, but for some problem, I need to persuade the users to change to use cached mode.
Recently we find that when user
mailbox reaches its size limit and try to send an email message in Outlook 2010 that is in cached mode, the email message stays in the
Outbox and the Mailbox Cleanup wizard does not start. It just prompts
for "send and receive error". As most of the user would not look for what the error is referring and just call IT to fix. Even worst is, they didn't realize that the mail is still in outbox.
I find the KB2544027 describing this issue but was not available and suggest to install 2596485.
http://support.microsoft.com/kb/2544027/en-us
I've try to install the hotfix and install Office 2010 SP2 but just doesn't work.
Does anyone know how can I fix it?
Thanks!

Hi,
Based on my research from the internal resource, this issue has been fixed in build 14.0.6126.5000 or less. I suppose that the hotfix not available because it has been involved in the release.
I’d like to confirm your Office 2010 build number so that we can conduct a deeper analysis on this issue.
In addition, make sure you have installed the latest update for Office 2010.
Best Regards,
Steve Fan
TechNet Community Support

Kinect for windows sensor does not start when using remote WMI

Scenario:
I have written a software (lets call it kinectRecorder.exe) that uses "kinect for windows sensor" to record images. The machine that connects to the kinect sensor has windows 8.1 and kinect v2 installed. The software is able to successfully records
images from kinect sensor when running locally. (meaning if I hit f5 from vs2013, frames are recorded to local disk)
Due to resource constraint and other requirement, I have to remotely kickoff kinectRecorder.exe on the windows 8.1 machine from a windows 7 machine. on the windows 7 machine, I remotely kick off the kinectRecorder.exe using windows WMI infrastructure.
The credential used for windows 8.1 machine and windows 7 machine are the same under same windows domain. the credential used to authenticate in wmi is also the same, I can see the user name running kinectRecorder.exe after kinectrecorder.exe is started
remotely.
Problem:
The result is that kinectRecorder.exe starts ok, but after the kinectsensor.open call, isavailable property changed to false, meaning sensor not detected.
Question:
What's stopping kinect sensor to be detected/opened (i'm not sure what the correct jargon is here)?
I have been search the web, In msdn documentation (known issues), I cannot find the problem being mentioned. I wonder if I'm the only person who has encountered this issue before.
Any pointer is hugely appreciated.

Kinect is not supported within the context of a service because of the underlying need for a user session, see
https://social.msdn.microsoft.com/Forums/en-US/72cecf8b-ac64-47e2-b54b-ddbd1dc237c9/calling-kinect-sdk-apis-from-a-windows-service-is-not-possiblesupported?forum=kinectv2sdk
Can determine that the system has at least one logged in user and can you launch the application within that users session? KinectMontior/KinectService must be running for the runtime to get any data from the sensor. If you use Remote
Desktop to log into that user session, you can confirm this works by running any of the samples and they should work without issue(remember to ensure that your audio remoting is left on the server, see troubleshooting guide
https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk).
Carmine Sirignano - MSFT

I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

You need to contact the developer/manufacturer directly to determine if their product is compatible w/Yosemite. It is not listed on their system requirement website:
Mac OS X 10.9 Mavericks
Mac OS X 10.8 Mountain Lion
Mac OS X 10.7 Lion
Mac OS X 10.6 Snow Leopard*
Note: ArchiCAD 17 is the last version of ArchiCAD to support Mac OS X 10.6
Only case insensitive file-system volumes are supported.
http://www.graphisoft.com/support/system_requirements/archicad17.html

PC does not start when pressing the power button, After that starts automatically like a ghost!

I have HP Pavilion a6030in, My pc does not start when i press ther power button, but it starts after sometime automatically after that it works fine.
Again when i shutdown and leave it for sometime, and still the problem is unsolved.
Please Help
This question was solved.
View Solution.

he figured out you dont just shut the lid and walk away, you use Windows shutdown
click Kudos to say thanks if I helped

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

ITunes does not start when I plug in my iphone after I upgraded to Lion?

iTunes does not start when I plug in my iphone after I upgraded to Lion? It worked fine prior to upgrading.

http://support.apple.com/kb/TS1538

ITunes does not start when iPhone plugs in

my itune does not start when I plug my iphone or ipad in , this stater with lion install

Please see here if it helps:
https://discussions.apple.com/message/15705708#15705708
Regards, Michael

My airport does not start when pligged in

My aipport does not start when plugged in. The light does not come on at all. If there some kind of a reset switch?

With no light at all, unfortunately it is likely that an internal component in the AirPort Express has failed.
The reset switch is next to the audio jack. Try a different AC socket. With the AirPort Express plugged into power, hold in the reset button for 8-10 seconds, then release.
If successful, the AirPort Express will restart to a solid amber light for 30-35 seconds, then begin to slowly blink amber after 40-45 seconds.
If you try the reset a few times with no success, I'm afraid that the AirPort Express has failed and will need to be replaced.

Siri does not work when used for calling a contact function

Siri does not work when used for calling a contact function

Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
If it continues try to restore it.

TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
Terrence

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a quesitonmark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-key

Using Firefox (and having ZoneAlarm), when logging into my work email (Lotus Notes) through a secure Citrix program, a question mark types as and accented "E". This does not happen when using IE (which I prefer not to use). I have turned off the anti-keylogger in ZA (an old, and no longer successful fix). Can anyone help? I need my question marks at work.
Thanks!
PS. my keyboard language is not set to French.
== This happened ==
Every time Firefox opened
== I tried to type a "?" in a work email using remote access.

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)

Hi
Tablet Lenovo S8-50LC
Wlan(WiFi) Does not work when use Sim Cart(3G).
What is the solution for this problem?
Build Number : TABS8-50LC_S000200_150121_ROW
SoftWarw Version : TABS8-50LC_150121

Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

My iphoto 09 keeps on downloading duplicates to a temp folder without asking when I drag a photo from firefox over to iphoto to import it. It does not happen when using safari. can some one please help?

My iphoto 09 keeps on downloading duplicates to a temp folder without asking when I drag a photo from firefox over to iphoto to import it. It does not happen when using safari. can some one please help?

You're in the wrong forum. Post to iPhoto for iLife, not iPhoto for iOS.

Opmn service does not start when try to start Oracle BI Services

Hi ,
I was able to install OBIEE 11g on my laptop and it worked fine for two days. Today when I try to login to rpd and type my user name and password I get the error that my user name and password is not correct. I tried to restart the machine and now I am not able to start opmn service.
When I do Start>Oracle Business Intelligence (1)>Start BI Services, the script run and two command line windows open and about 10 minutes later get the last line that server started in RUNNING mode, but some how Oracle Process Manager (instance) service does not start. It started two days ago when I was able to login to OBIEE 11g.
If I try to go to OBIEE 11g Home page I get this error "Error 500- Internal server error from RFC 2068 Hypertext Transfer Protocol- HTTP/1.1: 10.5.1 500 Internal server error
Any Idea how to fix this one.
Thanks

Maybe you need to tick the "use fully qualified names" check box and make sure that you have the schema object created (as a "folder" between the database and the tables in the physical layer).

IAS does not start when using SSL

Similar Messages

Maybe you are looking for