IAS with Resonate

We are putting Resonate in front of iWS+iAS to provide load balancing and fail-over between two servers.
We are trying to set up sticky session for our iAS applications. I was told that we need to modify the session cookie name used by iAS.
Is there any way to modify the name of iAS session cookie name so server A will use gx_session0_id and server B will use gx_session1_id?
Thanks!
Alex

You are correct, that is assuming you want to use the same policies. Use the management interface ip on the IAS for remote client.

Similar Messages

Not able to install ias with sp3..

I have Downloaded i-Planet Application Server with Service Pack 3. When
i started installing it on windows 2000. It says Installation completed.
But unfortunately there is no software installed on the system.
i-Planet Application Server with Service
Pack 3 supports windows 2000. Infact i followed the installation
instructions given in i-planet web site.
Can u please tell me what might be the
problem. is there any other way to install this application server on
windows 2000.
Waiting for an answer for u guys.
Thank You,
With Regards,
Rama Krishna Manne
Ph: 703-547-5264(Work)(8:30am-5:30pm)
E-mail : [email protected]
[email protected]

Hi Rama,
Can you please tell me which webserver you are using with
iAS-TestDrive-Sp-III, it
should be iWS-4.1.
The type of problem you are getting, can arise sometimes if your DNS-Suffix
is not set properly.
Setting the DNS Suffix in Windows :
1. Make sure you are using static IP address.
2. Right click on My computer (icon on desktop or in windows-explorer), then
click on properties, go to Network identification Tab, Click on
properties, then click the more button, set the Primary DNS suffix (like
india.sun.com), and also check the Change Primary DNS suffix when domain
membership change check box, click all Ok buttons.
Sometimes fixing the DNS-suffix this way doesn't update the windows
registry.
To make sure that it is added to the windows registry just run regedit and
click on the :
My
Computer\HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Tcpip\Parameters
key, you will see the Domain key value set to your domainname, otherwise
enter
the domain name into this key value, and than reboot the m/c, and than
reinstall
the iAS. It should work.
If you further encounter problems, please mail me back.
Sanjeev,
Developer Support Team iAS.
rama wrote:
I have Downloaded i-Planet Application Server with Service Pack 3. When
i started installing it on windows 2000. It says Installation completed.
But unfortunately there is no software installed on the system.
i-Planet Application Server with Service
Pack 3 supports windows 2000. Infact i followed the installation
instructions given in i-planet web site.
Can u please tell me what might be the
problem. is there any other way to install this application server on
windows 2000.
Waiting for an answer for u guys.
Thank You,
With Regards,
Rama Krishna Manne
Ph: 703-547-5264(Work)(8:30am-5:30pm)
E-mail : [email protected]
[email protected]

IAS with WLSM - now adding WiSM

Hi All,
I'm dealing with an existing Wireless network where,
- the Radius server is IAS.
- auth to AD behind IAS
- APs are autonomous 1231's
- there's WLSM's
We're adding
- WiSM
- 1242 Lighweight APs
Each WLAN has a static policy that applies to all clients associated
with an SSID. We don't want to do identity networking.
VSA'a are not being used.
Assuming I want to keep the same policies for wireless clients associated to new light-weight infrastructure as for the existing Autonomous infrastructure would I use the existing Remote Access Policy on the MS IAS and just add the WLCs as clients of it?
Thanks.

You are correct, that is assuming you want to use the same policies. Use the management interface ip on the IAS for remote client.

IAS with JBuilder v5 EE

Is it possible to attach iPlanet Application Server with JBuilder 5
Enterprise ?

Alex,
Did you ever get a response to this posting? I am also interested in using
JBuilder 5
"Alex Lin" <[email protected]> wrote in message
news:[email protected]..
Is it possible to attach iPlanet Application Server with JBuilder 5
Enterprise ?

IAS with different applications

Hello,
I need some help...(URGENT)
This is my scenario. I have a 2 node cluster machine with 9 instances, and a 9iAS(9.2.0.1) machine with middle and infra installed. The 9iAS machine will storage 9 forms 9i applications accessing their own database's.
http://myIASserver:7778/forms90/f90servlet?config=app1
I've already created 9 port(7778;7780;7782...) and 9 config's in formsweb.cfg for each application.
What i need(and for me is being the hard part) is that each port became exclusive for each configuration and exclusive for each database instance.
Example:
I need that the user when use port 7778 access only database for app1 or port 7780 for app2. I also need to validate his user/password.
Thanks,
JoÃ£o Almeida
(Portugal)

Helpful but is there a way to separate the two so I don't have to individually choose the apps? Would that mess up our accounts because they're downloaded with different accounts? I know with the music, I can just make a separate playlist. Thanks.

Cisco 3750 with integrated WLC, wpa2 ent, 802.1x and ms IAS.

So first post, I usually figure most of this stuff out. I have this all working with latest firmware etc, but I have more of a MS IAS issue than anything.
The Peap cert used is one generated for my IAS controller, but I have two things... I'd like it to be highly available (if I shutdown Ias#1 it uses ias#2 and has a different certificate as its host name dependent). Also, if I can get a certificate for both IAS servers (using ms cert authority, trusted by all my comp's etc), I'd like it to be more than a one year cert.
Both IAS servers are DC's, so when creating a cert request from Mmc cert snapin for machine, it has the template domain controller and only uses the machine name. I need to make a 2-5 year cert generic for IAS.
Thanks for any help.
Sent from Cisco Technical Support iPad App

There are two thing you could do.
1.) use a GPO to push the certificate from IAS#2 to all your clients.
2.) under the PEAP config, uncheck the validate server certificate box.
With PEAP, the supplicant doesn't 'need/have' to have the server cert, it's an option. When I'm testing, I alwasy uncheck this box. You could test if the clients will failover to the other IAS with the option unchecked.
As for the cert, are both of these devices a CA, or are you using as self genereated cert? If you have multiple IAS, you may want to promote a server to be a CA< and then issue both of these servers a cert from there. Then you only need to have your CA root on the client, instead of each IAS.
HTH,
Steve
Please remember to rate helpful posts or to mark the question as answered so that it can be found later.

ASA5500 V8.2 integration with IAS adn etoken pass

Hi,
I am needing help or direction to a document whcih can assist me solving the below issue:
1). Authentication to IAS with OTP.
2). AV Pairs for Cisco ASA.
In brief I have Radius via IAS, authentication working with the standard username and password from AD.
When I implement the OTP feature I receive the error username or password not valid as per the below:
Event Type:    Warning
Event Source:    IAS
Event Category:    None
Event ID:    2
Date:        8/1/2010
Time:        2:08:13 PM
User:        N/A
Computer:    NTS-RADIUS2
Description:
User erezsh was denied access.
Fully-Qualified-User-Name = NTS-QA\erezsh
NAS-IP-Address = 10.20.2.249
NAS-Identifier = <not present>
Called-Station-Identifier = <not present>
Calling-Station-Identifier = <not present>
Client-Friendly-Name = Cisco-ASA
Client-IP-Address = 10.20.2.249
NAS-Port-Type = Virtual
NAS-Port = 40
Proxy-Policy-Name = General
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = <undetermined>
Authentication-Type = PAP
EAP-Type = <undetermined>
Reason-Code = 16
Reason = Authentication was not successful because an unknown user name or incorrect password was used.
The OTP feature uses a xml plugin whcih appears straightforward, but I feel is causing me the issue:
<return_pap_cred>false</return_pap_cred>
<return_pap_cred_attribute_number>2</return_pap_cred_attribute_number>
The question in relation to the above is is there an av attribute for the ASA for pap credentials (Password).
Any help or direction would be appreciated.
Thanks in Advance.
Jack Wikinski.

your break is nt the better for this
i think you can create a temporary table
the fields salesman category and quantity
insert and update for each record with a formula or create a new sql query and maybe use a matrix to show as you want

Ias running with SSL

hey all.
I'm trying to execute some procedures with MOD_PLSQL, and it works just fine.
when I try to execute the same SP with the site is
using SSL, the app server seems to hang - nothing happens.
does anyone tried working with 9i ias with apache and ssl configuration?

There is some stuff in the Oracle9iAS Portal Security and Login Server forum

Easiest and/or best methods for generating XML output (not with a report)

Hi, several of our EBS customers (11.5.10) are converting their PDF reports to use XML/BI publisher to produce output. The data stream comes from a report that generates the XML output, and then the XML template is applied. This works great ... no problems, etc. From what I have read, however, Oracle intends to treat the traditional Forms and Reports Developers as legacy tools (although still supporting them, of course).
My question is if I wanted to ditch using Reports to generate XML output, what, in your opinion or in your current usage, is the easiest way of getting this data? In Reports, the data modeler is excellent in providing a method to write your queries, split them into different repeating groups, write formula and summary columns, link multiple queries, etc, etc. If one were to become Reports Developer free, what comparable tools are available to take its place? I would expect this tool to handle a mix of GUI and coding like the Reports data modeler. Please note that I'm not looking for an EBS-specific solution -- say for a custom application using regular Oracle 10g DB and iAS, with BI Publisher for reporting.
Thanks for your feedback,
Ryan

What I'm looking for is to not use Oracle Reports to generate the XML data output since Oracle's statement of direction is pushing BI Publisher rather than Oracle Reports as the preferred tool for reporting. That said, the data modeler in Reports provides a very flexible tool to construct and link multiple queries and to manipulate the queries into several levels of a master/detail relationship. Further, the mix of GUI and coding makes setting up the data model a lot more efficient. What I'm looking for (and I don't know if anything exists) is something comparable that can be used to generate XML output from the DB -- the idea being that I wouldn't use legacy tools, like Reports, for this task. I hope that is clearer.
Really, another way of answering my question is, aside from Reports and the APIs mentioned so far, what are my fellow developers using, if anything, to extract XML data in a way that handles the features i list above?

How to install infra and ias( bi) on same host?

I can install and run infrastructure, but when i install the ias( with bi option) on the same machine( host), the error linking a taget runm_install of ... ins_reports appears.
How to resolve?
Thanks.

Make sure you have separate ORACLE_HOME for infra and midtier.
RP

Remote deployment from iAS to iAS

Hello,
I'm new to iAS and need some info/suggestions about deployment in this scenario:
Host A (source) : 1.0.2.2.1 iAS + 9.0.2 OC4J standalone (from zip).
Host B (destination) : 9.0.3.0.0 (build 020927.1699) iAS with OC4J managed by iAS, OHS and WebCache (not Portal,etc.).
We want to deploy the ear files from Host A (development iAS) to Host B (production iAS).It seems we have this choices:
1.with Web-EM (http://hostname:1810) from a client-browser, but it searches the ear locally.
2.with admin.jar : we obtain this error because in the Host B there is no RMI port listening:
$ java -jar /ORACLE/OAS1/j2ee/home/admin.jar ormi://asub.ub.edu/ admin manager
-deploy -file app.ear -deploymentName app
Error: javax.naming.NamingException: ...
Connection refused
3. within the directories in Host B and manually editing XML's: this is the way in Development (Host A) but it's not what we want in Production (implies OS users to Host B).
4.With command-line DCMCTL , it works but only locally from Host B, not from Host A.
5.With JDeveloper, from the developer PC. This is a problem when the ear is large and the PC is not in our network.
I think the best option is (2), with admin.jar , but it fails if the destination Host is not a standalone OC4J (in this case exists a RMI port listening) and we want the pack iAS+OC4J(because also includes OHS,Webcache...)
Would you please indicate how do we deploy to Host B from ear files located at Host A with admin.jar ??
And if it's not possible, could you please indicate references/possible solutions??
Thanks in advance,
Robert.

Hmmm.
We don't use JDeveloper. We will have many external contractors delivering j2ee applications which they developed at their own environment (tomcat,jboss etc) to our win2k delivery terminal server running IAS903 core. They are required to use ANT to build their ear files, deploy their applications, test, make changes and redeploy.... We can't have someone just to sit there to redeploy the app for them! We do migrate their finished apps to our test and production environment.
Currently our delivery environment is oc4j10221 standalone which can hot redeploy an app when a new ear file is detacted and server.xml/global-web-app.xml timestamp are "touched" so the contractors can easily manage their iterations of application delivery.
What is the best way to let the contractors to run their own show in IAS903 core without me getting phone calls to redeploy their apps every 10 minutes?
We need to run IAS903 core in delivery because we keep the exactly same s/w & h/w across environments so we don't have surprises later on.
delivery->test->production (all win2k & ias903 core)
Thx.
Ken

How to validate users with Novell Directory Server

Hi all, with iAS 6.0 SP3, how i can validate users stored in Novell
Directory Sever?
Thanks

Hi
I believe iAS is designed to work with iDS which is bundled along
with the SP3 download. Also the directory server which is working with
iAS must be Nortel LDAP Schema compatible and I'm not sure if NDS(Novell
Directory Server) is compatible. What I'm trying to understand is if you
have already registered iAS with NDS and you are having trouble in
accessing the users or if you are having trouble in the installation.
Raj
Josep Maria Camps Riba wrote:
Hi all, with iAS 6.0 SP3, how i can validate users stored in Novell
Directory Sever?
Thanks

Is solaris 2.5 sunOs 5.7 suitable to install iAs 6.5 or iAs 6.0 SP3?

Im having trobles when adding the licence key, because de libCstd.so.1 is not found. But in the installation guide there is no patch sugested for Solaris 7

iAS6.0SP3 and 6.5 are meant for solaris 6 and solaris 8. So it might not work with solaris 7. If you want to run iAS with solaris 7, you can add the patches asked for solaris 6 or solaris 8. But it is not guarented to work properly once after you add the patches.

What diffrent it make to install the IAS6 with the same LDAP?

Hi:
Once I want to install the ias/iab into my nt4.0/sp6 ias6sp1 .one for
developing and the other for testing.if i intall both of those ias with the
same ldap server ,what diffrent it make than to intall them with the isolate
ldap server?
any feed back is welcome!
huang zhonghong

I don't think ias6 for NT can support two ias instance installlation, but on
solaris it is posible
you can install ias6 use different port number and choose different global
iasconfig name
Litu
huangzhonghong wrote:
Hi:
Once I want to install the ias/iab into my nt4.0/sp6 ias6sp1 .one for
developing and the other for testing.if i intall both of those ias with the
same ldap server ,what diffrent it make than to intall them with the isolate
ldap server?
any feed back is welcome!
huang zhonghong

Wireless Phone 7925 authentication with Windows NPS

Hello,
I try to enable Authentication on our Wireless phone 7925 that are connected on WLC.
Can I use Windows NPS?
I try to use it without success, phones are not able to authenticate.
Someone can help me?
Thanks a lot!
Seb

Same thing for 2003, it is called IAS (Internet Authentication Service).
http://www.microsoft.com/technet/network/ias/default.mspx
Basically you will set up IAS with a RADIUS Client which would be your wireless access point(s). Then you will set up a remote access policy which will define how connections are authorized or rejected (windows groups, protocols etc.). Don't forget to register IAS with active directory.

IAS with Resonate

Similar Messages

Maybe you are looking for