IB01 Load equipment Bom
Does anyone know if there is a standar program to load equipment bill of material, i tried using a recording but when executing the batch record the screen changes from the one where i created the recording so is not working. I will appreciate if you can help me out with this. I even tried with a standar object 0030 but is asking me for a logical file that i can not assing.
try with below LSMW IDOC method
Message Type /ISDFPS/BOMEQU BOMs: Equipment BOM
Basic Type /ISDFPS/BOMEQU01 Equipment BOM
Enhancement
Similar Messages
-
Error while creating equipment BOM (IB01)
hi guys,
while creating equipment BOM (IB01) i am getting this error, while adding components.
'Material type NLAG cannot be used with item category (plant 1000)'.
regards
chintaHI Chinta,
I understood ur problem IB01-give the equipment number which is generated by the system and give plant name in which you have created the equipment and bom usage as 4 (plant maintenance) and press enter.
Then you will get the components list give the description,quantity and item category as:
as you gave it as L it is throwing an error give it as N(Non stock item), then you wont get the error.while selecting the item cat. you will get differnet components and you select the appropriate one based on you equipment.Hope you issue is resolved.
Regards,
Bharat -
Equipment BOM ( t code - IB01/IB02)
Hi,
I want to check duplicate entry of MAT code in a Equipment BOM ( t code - IB01/IB02) .
is it possible in 4.6B version of SAP R/3.
Plz suggest.Hi Sunil,
It is not possible in ECC 5.0 also for Equipment BOM.
It is possible only in material BOM creation in PP module.
Regards,
Santhosh -
Hi Experts,
I have created a LSMW through "Batch Input Recording" method to upload materials to Equipment BOM.
It caters to upload 5 materials per equipment. However if input data contains only 3 materils for a equipment then LSMW gives an Error. Have to enter 2 more materials to the BOM.
How can i overcome the matter?
Is there any other method that i can follow to upload the Equipment BOM?
Thanks in AdvanceHi,
Use standard Object
0030 Object
0001Method
main Structure : BOMHEADER
Sub Structure : BOM item
BOMHEADER BOM header
EQUNR C(018) Equipment
WERKS C(004) Plant
STLAN C(001) BOM Usage
BOMITEM BOM item
EQUNR C(018) Equipment
POSNR C(004) Item (SD)
POSTP C(001) Item Category
IDNRK C(018) Component
MENGE C(013) Quantity
MEINS C(003) Base Unit of Measure
In Field mapping and conversion rule Maintean TCODE as constant IB01.
Create Logical and Physical path during specify files under Converted Data.
It will create Equipment BOM
Regards,
SandeepV -
Can someone please specify the steps required to create an equipment bom lsmw
hi Alagasen
why don't you use standard object "create material BOM",change the transaction code from CS01 to IB01
and do the mapping and upload
regards
Seenu -
Equipment BOM & Plant assignment
Dear All,
My client having two Maintenance Plant which is 1001 & 1002 & having one planning plant which is 1001.
Here 1001 plant executes the maintenanace of 1001 & 1002 plant.
Actually we have created one Equipment in plant 1002, so its maintenance plant is 1002 & its planning plant is 1001, in this condition when i am going to create Equipment BOM through tcode IB01, then which plant needs to be assigned to that Equipment BOM.....1001 or 1002 ??
Thanks & Regards,
SandeepSandeep,
As equipment has been created in Plant 1002, in equipment BOM creation, plant should be 1002. Equipment BoM definition plant would be based on the equipment location.
Hope this will help you.
Regards,
Maheswaran. -
Functional location BOM and Equipment BOM
Hi,
I would like to know which tables store information of Functional location BOM (TCODE 1B11) and Equipment BOM (TCODE IB01). Is there a possibility that once we create these BOM's we can create alternative BOM as in case of Material BOM (TCODE CS01).
Regards,
VishalHi,
Tables for Eq., BOM: EQST, STKO, STPO.
Tables fro Fun., Loc., BOM: TPST, STKO, STPO.
You can use FMs: CS_BOM_EXPL_TPL_V1, CS_BOM_EXPL_EQU_V2 & CS_BOM_EXPL_MAT_V2 for extracting the appropriate BOM related data.
And for the Alternatives please check the customizing or check with your respective Module experts for the appropriate configuration.
Hope this helps.
Best Regards, Murugesh AS -
Equipment BOM quantity field as optional
Hi Expert,
Does anyone know how to set quantity field as optional in Equipment BOM transaction (IB01)
Pls help. Thank you
Rgds,Leni,
The field selection for the quantity field is dependent on the item category,Transaction type, etc of the BOM.The field selection attributes are fixed in tables TCS33. I don't think you can change this through config. However if you are in ECC 6.0 you could consider tweaking the resultant field selection attributes through implicit enhancements on the screen flow logic.
However why would you want an item without quantity?
Regards
Narasimhan -
Equipment BOM and Equipment Task List
Hi
I have created an Equipment BOM (IB01) and Equipment TL (IA01). When creating a WO using IW31 why doesn't the TL and BOM get copied across?
Regards
AdeelWhile doing maintenance for equipment (creating order in IW31), its not necessary that all the operations in task list & all the materials from BoM should be used.
Based on the maintenance, you can select the operations from task list & you can select the components.
In order, go to Extras => Task list selection => Reference object. It will list the task lists available for the equipment, from that you can select.
For components, in components tab, there will be structure button. Click that, it will show you the BoM created, from that list, select required components.
Note: Only in Production order, all the operations from Routing & all components from BoM will be copied. This is because for production order, all the operations & components are required to produce the finished product. -
Hi,
Is there a BAPI or a function module available for Equipment BOM creation for transaction IB01.
ThanksHi Nidhi,
Chk the below links you might get an idea.
/people/prakash.singh4/blog/2005/05/15/explode-boms-in-enterprise-portal-using-htmlb-tree--part-1-abap
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/2e4114a61711d2b423006094b9d648/frameset.htm
Reward points for the helpful answer.
Regards,
Harini -
Hi All,
Can anyone please let me know if there is any kind of standard BAPI to upload Equipment BAPI. I use transaction code IB01 to create equipment BOM.
If not, does any guy have a BDC program to upload equipment BOM with transaction code IB01.
Thanks a lot for all your help
BeatleDear,
Pls check FM BAPI_MATERIAL_BOM_GROUP_CREATE or
FM 'CSAI_BOM_CREATE' can be used to create the Equipment BOM, u need to pass STLTY as 'E' in structure STKOB, this will create equipment BOM,.
Regards
Sunil -
Hi All,
Please let me know if there is any BAPI/ FM available for creating Equipment BOM (IB01 trancastion).
Thanks in advance
regards,
BoomaCheck sample code in:
http://scn.sap.com/thread/562325
Regards,
Sergio. -
Is there any standard BAPI to create Equipment BOM? Tcode - IB01
Hello,
I use that bapi for create BOM but not equipement BOM.
I find on forum, response wiche can help you :
Equipment BOM Upload BAPI
RFC / BAPI for Equipment BOM - IB01
http://wiki.sdn.sap.com/wiki/display/ABAP/ECCstandardBatchInputprograms
Thierry -
Tables or Logical database to create standard report for Equipment BOM?
Dear All
My client has requirement for the report with fields like to see the status of Equipment BOM(input of Equipment number in selection screen) or for Particular set of Materials(input of component number in selection screen) available stock quantity,storage location of stock,description of component,price of component,Pending PR of component(if any),Pending PO of component(if any) etc
I want to develop the report with standard infoset query instead of going for abap development.is there any logical database to map the report or what tables can i use for table joins??
Required sample report with fields as below
BOM Component
Stock available/Not available indicator
Description of Components
BOMQty/ UOM
Price
Part Number
Plnt
Sloc
Stock Qty
Bin
Pending PR
Pending PO
1000001121
YES
BEARING
NO
2000
ERS22
1000
MECH
4
A1
300012431
Regards
M.ManojkumarManoj,
The following is the tested solution.
Table join
Output
This figure shows the case of a Equipment BOM where 3 components are there. Installed Quantity are 4, 1, 1 respectively. Last two columns are showing the Storage Locations and the Stocks available.
Fields taken to output are
From STPO : IDNRK MENGE MEINS
From MARD LGORT LABST
As said before, more than this you can not do in SQVI. With this basic join in SQ02, using codes in Extras you can do much more.
Jogeswara Rao K -
Item category in equipment BOM ?
hi all,
how could i chose the item category of a component while creating equipment BOM.
how do i know weather it is of 'L' of 'N' or any thing else.
regards,
chandraHi
Item category L- stands for stock items i.e. for these items you normally maintains stocks.
N- is Non stock item i.e. when you use it in BOM its for idication only. However when one creates order & assigns components of item category N, it trigers a PR for immediate procurement. So check with your business requirement.
Regards
Shakti
Maybe you are looking for
-
Hi I have a problem with my loops. They play ok in the browser, but when I move them to a track they sound like they are muffled or under water. Any ideas what could be going on? Are instrument libraries part of the installation? I can't find any doc
-
Training and Event Management - Sales Organization
In <b>Create Billing / Allocation Info (IT1037</b>), Billing Section, there is a field for <b>Sales Organization</b>. Is this Sales Organization to be defined (by Sales Team) in S & D and to be assigned in this Infotype for billing purpose? I presume
-
Problem in self service after upgrade to 10G
Hi all, My customer has upgraded recently to 10G database and running on 11.5.10.2 application. I have procedure in the custom package in the database accessed through the mod_plsql. After some time it's working, the server start replying with web pa
-
N:1 Mapping and Matching Lines of Message 1 to Message 2
Hi Everyone, I have an n:1 mapping and I need to match up the lines of message 1 to the lines of message 2 to map the target. For example: Source 1 Key1 = A, Key2 = A, Key3 = A, Field1 = Red Key1 = A, Key2 = B, Key3 = B, Field1 = Blue Source 2 Key1
-
12-way secondary color correction
I earlier submitted a feature request asking for the "primary" 12-way color controls to be available on seconday layers in SpeedGrade. Is there any other way to restrict a primary layer's precise controls to an HSL key (or to its outside)? It would b