Iball Usb modem(dongle) not working on g510 after windows 10 installation

Hi to all, I have just joined the forum to take some help from u people. I have a G510, on which i have just upgraded the OS from windows 8.1 to 10. After upgrading, some issues came like hdmi cable not working, external hard disk not detecting, etc., which with installation of drivers from lenovo website just went away. But still there is a problem of not connecting of my iball airway 21.0 Mp-58 3g usb modem with the lappy. The message coming while installation is "633The modem (or other connecting device) is already in use or is not configured properly".  I have written to iball customer care for providing supporting driver for windows 10, but apart from them, if anybody else knows the way out, kindly share that to me. Thanks and regardsVirendra

Hey Dhelios and welcome to the forum -
I read this at their site and it didn't look good. Please note the NOTE:.
Release 3.01 UK - Apple Mac
Mac OS | Mac OSX 10.1-10.3 | Mac OSX 10.4
The ST-330 and ST-USB driver requires BSD support from Mac OSX.
Be sure to enable BSD support during the installation of Mac OSX!!
NOTE: The ST-330 and ST-USB driver does not support Intel based Apple Macs. For Intel based Macs we recommend using an Ethernet modem/router. A list of compatible ST-500 and ST-700 series products is available online here>

Similar Messages

  • I Installed Lion and now my USB modem will not work to send a PDF fax? Do I need a new USB modem to send faxes or is there a software update that I need?

    I Installed Lion and now my USB modem will not work to send a PDF fax? Do I need a new USB modem to send faxes or is there a software update that I need? Also can I change the picture of the login screen? That grey mat looks ugly!

    As posted by Ham on July 29 @ 9pm on this thread <https://discussions.apple.com/message/15786976#15786976>.
    Official statement from Apple:
    http://support.apple.com/kb/ht3152

  • External USB keyboard does not work with T60 after BIOS upgrade

    External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
    It does the same with or without the docking station.
    Anyone else bumped into this problem yet? 
    Has someone found any fixes for this?
    t

    Hi and welcome the forum!
    Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
    v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • 3g usb modem does not work on Lion?

         I have had a 3g usb modem for almost two years now, it worked fine on Snow Leopard but does not pick up any connection to any cell tower after my upgrade to Lion. Any suggestions?

    Thank you 'etresoft'. With minimal information from me you have provided a fix to the problem. Although, the cost at 49.5 euros per computer is a bit steep. I think I will just buy a later spec modem at $A79 and be able to use it on all my computers. Regards from iadoreapples

  • Apple USB Modem is not working (Snow Leopard)

    Hi,
    I'm despered, because I'm looking for the answer for over a week.
    I just bought an Apple USB Modem (this for telephone line 56k), but
    it's not working with my computer (zero response, I cannot find it in
    System Preference => Network)
    As far as I noticed, everything with modem is ok, because when I
    plugged it to regular PC it's responding.
    Help...
    ps. sorry for my gramma...I'm not native english
    Icon

    There are users with USB modems and they seem to have got them to work. have a look at this thread:-
    http://discussions.apple.com/thread.jspa?threadID=2130862&tstart=0
    regards

  • External USB Modem fax not working under 10.5.8

    I upgraded my Mac Mini home office server (print, fax, backup) to 10.5.8 and now it appears that faxing is completely broken (or maybe the USB modem driver.)
    I've verified that this is broken on another system.
    After booting, the following is seen in the fax log:
    efax: 33:57 command "+FAR=1"
    efax: 33:57 waiting 5.0 s
    efax: 33:57 .956 [<CR><LF>ERROR<CR><LF>]
    efax: 33:57 response "ERROR"
    efax: 33:58 command "S0=1"
    efax: 33:58 waiting 5.0 s
    efax: 33:58 .157 [<CR><LF>OK<CR><LF>]
    efax: 33:58 response "OK"
    efax: 33:58 waiting for activity
    efax: 33:59 activity detected
    efax: 34:00 Error: tcsetattr on fd=5 failed: Invalid argument
    efax: 34:00 Error: tcsetattr on fd=5 failed: Invalid argument
    efax: 34:00 command "Q0V1"
    efax: 34:00 Error: fax device write: Input/output error
    efax: 34:00 waiting 2.0 s
    efax: 34:00 waiting 2.0 s
    efax: 34:00 command "Q0V1"
    efax: 34:00 Error: fax device write: Input/output error
    efax: 34:00 waiting 2.0 s
    efax: 34:00 sync: dropping DTR
    efax: 34:00 Error: tcsetattr on fd=5 failed: Invalid argument
    efax: 34:00 Error: tcsetattr on fd=5 failed: Invalid argument
    efax: 34:00 Error: tcsetattr on fd=5 failed: Invalid argument
    efax: 34:00 waiting 2.0 s
    efax: 34:00 command "Q0V1"
    efax: 34:00 Error: fax device write: Input/output error
    efax: 34:00 waiting 2.0 s
    efax: 34:00 sync: sending escapes
    efax: 34:00 Error: tcsetattr on fd=5 failed: Invalid argument
    efax: 34:00 Error: fax device write: Input/output error
    efax: 34:00 Error: fax device write: Input/output error
    efax: 34:00 Error: tcsetattr on fd=5 failed: Invalid argument
    efax: 34:00 Error: fax device write: Input/output error
    efax: 34:00 Error: fax device write: Input/output error
    efax: 34:02 Error: fax device write: Input/output error
    efax: 34:02 waiting 2.0 s
    efax: 34:02 command "Q0V1"
    efax: 34:02 Error: fax device write: Input/output error
    efax: 34:02 waiting 2.0 s
    efax: 34:02 Error: sync: modem not responding
    efax: 34:03 done, returning 2 (unrecoverable error)
    Anybody else seeing this?

    This solution is a "workaround" and will not affect in any problems, like I saw that they will happen after:
    1.) Removing and changing "IOSerialFamily.kext" : ("The system extension '/System/Library/Extensions/IOSerialFamily.kext' was installed improperly and cannot be used....")
    2.) or go back to OS 10.5.5... (latest security-updates not included)
    Go to your System-Prefs -> Printing and Faxing
    chose the Fax-Modem -> Options
    1.) to receive faxes: choose "receive faxes on this computer"
    2.) to send faxes: choose not to "receive faxes on this computer",
    plug your modem out, wait 5 seconds and plug it in.
    Now you can send faxes, but not receive,
    before you choose "receive faxes on this computer" again.
    To send, you have to start with 2.) again...
    It's strange for a mac, but better than 10.5.5 or a corrupted system...
    APPLE-STUFF: HERE AGAIN: FIX THAT FAX-PROBLEM FOR 10.5.8 QUICK PLEASE - IT'S IMPORTANT!!!
    trollius

  • Nokia 6120 Classic USB Modem is not working proper...

    Hello everybody!
    Something strange happened last week with my Nokia 6120 Classic (version: 03.83). I regularly use it as a USB modem and last week's Wednesday it stopped working. What the problem really is due to, is hard for me to say precisely.
    Using Windows Vista (Business, x64, SP1) "Connect to" function, I have previously connected to using HSDPA, but after last week the following happens:
    Starts with "Dialing" then goes to showing status "Verifying user name and password" for less than a second after which Vista informs that "Failed to connect to..." and the phone shows the 3G symbol with dashed arrows below.
    I've tried the following:
    - reinstalling PC Suite (the latest, greatest version)
    - reinstalling the modem drivers (between Nokia USB modem and 6120 USB modem) using the whole reboot thing
    - using another USB port, which doesn't work since Device Manager reports that the driver can't start properly
    - restarting, cold resetting the phone
    - switching to GSM only
    - testing with another computer running SP1
    - removing modem init commands for the Internet connection
    Now, the strange thing with the second computer was that everything worked just fine with it. My computer on the other hand didn't work at all!
    I've put the modem communication logs from the working computer here:
    http://docs.google.com/Doc?id=ah8pw9pjrf55_12g38wqpdt
    And the modem communication logs from my non-working computer here:
    http://docs.google.com/Doc?id=ah8pw9pjrf55_11hjcq39g4
    What was interesting on my computer is the "NO CARRIER" line which makes no sense to me: why on earth is it starting to check for a carrier signal all of the sudden??
    Any tips with this here dilemma would be greatly appreciated.
    Message Edited by manywhere on 18-Feb-2008 09:47 AM

    I tried using a Nokia E90 and connecting to the net using both PC Suite's "Connect to the Internet" and using Windows´ "Connect to" programs. With the E90, I had the same problems: fails at "Verifying user name and password" and the strange looking modem communications log.
    What the heck is going on with my Windows installation here? I tried removing the drivers again, repairing PC suite and restarting the computer, but to no avail.

  • [SOLVED] USB webcam mic not working in Skype after pulseaudio install

    I've followed the advice in the wikis
    https://wiki.archlinux.org/index.php/skype#Skype_sound
    https://wiki.archlinux.org/index.php/Al … ure_device
    but it's still not working.  Hoping someone can help me troubleshoot.  I did a test video using guvcview and the mic worked fine and the video had audio.
    Solution:
    Uninstalled pulseaudio
    Installed apulse from AUR
    Created and edited ~/.asoundrc as per https://wiki.archlinux.org/index.php/Al … ure_device
    Invoke skype:
    $ apulse skype
    Last edited by bpont (2014-11-17 05:44:24)

    Do you have pulseaudio installed or not? both of the solutions you posted are intended to be used if one doesn't want to use pulseaudio and both aren't necessary if you are actually using pulseaudio.

  • Adobe Bridge (CS2) not working. Even after new installation

    Hello,
    The Problem was, that Adobe Bridge (CS2 on Windows XP) suddenly stopped the work. After several days of trying to get this program to run again, i deinstalled and installed Photoshop with all it´s programms.
    But Bridge still is not working anymore. I can visit some folders once or twice, but after 2 tries, it stopps and give no reaction.
    What is wrong with Photoshop ?
    regards

    You need to reset Bridge preferences by holding
    Ctrl+Alt+Shift while starting the program from the icon. You should get a dialog offering three choices select all of them.
    This does not happen with a re-install of the program.
    If you don't get the dialog box, keep trying till you do.

  • Satellite A500 fn keys not working at all after windows 7 upgrade

    Hi everyone,
    I'm using Satellite A500 which i just did the windows 7 upgrade (32 bit) yesterday, however, i can no longer use the FN key on the keyboard which i'd use it very often.
    can anybody help??? much appreciated!!
    mav

    Hi, thanks for your reply,
    I'd some search on the forum, however, there're some similar issue, but they are not A500 model, so i m not sure it's reference.
    yeah i did download and install the value added package, and restarted my flash cards, and i did change the setting of the flash card, at least now i can use it by moving my mouse to the top of the screen and they pop up. but yet, the FN key still not working at all.
    i couldnt really find "common modules" or "hot key" to download, could anyone post the link here? if that would make my FN key work just like before?
    Thanks alot!

  • USB Wireless connections not working in Latitude E6320 , Windows 7

    Dear all,
    I having an issue with an external USB wireless network drive.
    I can install with no issue, however it appears always disabled on the network connection.
    Someone had a similar problem?
    thanks
    José Luz

    Dear Hemalatha,
    Thanks for your support on this issue
    I tried to updated all network drivers but with no success.
    Indeed disabled all the networks, I took several print screen
    Please take a look below:
    - All the network drivers are enabled execpet the TP-Link
    - All the network drives are disabled
    When I tried to enable TP-Link, i get this message
    If we take a look at Computer manager, you can see that everything is disabled except TP-Link
    However I´m unable to work wit it.
    Thanks once again for your support.
    Thanks
    José Luz

  • MSI GT70 audio not working with hmdi after windows 8.1 update

    When I connect my laptop to the TV, the video comes out fine, but the audio for the TV does not show up in playback devices. It worked fine with windows 8, but after the windows 8.1 update it stopped.
    I have tried updating realtek drivers, but it still doesn't show up. updating other drivers also doesn't work. plugging the cable into the computer then booting it up also doesn't work like it did for other people. This is really making me mad... any help would be appreciated.

    Quote from: zipper.sippola on 16-December-14, 23:25:58
    Pah, no probs to my ext. monitor speakers via HDMI, GT70 0NE, Win 8.1.
    Have you tried assigning HDMI one on audio tab as default and see if sound will come out to tv? if so then that was the problem.

  • Double-click not working on trackpad after Mavericks installation

    After doing a fresh installation of OS X Mavericks and zapping PRAM, I noticed that I'm unable to double-click using my trackpad (this is true throughout all applications, not just the Finder).  Can anyone advise me on how to remedy this?
    My system is a Late 2002 MacBook Pro Retina.
    Thanks,
    Nicholas

    You can type Command-Shift-G and type in ~/Library/Preferences
    I had some challenges deleting everything here while logged in, so you'll have to do this from another Admin account. 
    I suggest just doing a clean install if you have the time.  That solved all my problems and reduced my boot time as well.

  • Lenovo Y50 Not connecting to Internet after windows 10 update

    Just as the title says.
    I was able to install some windows 10 updates with wifi as my usb modem would not work
    After that i can't connect to the internet. I can connect to wifi and it shows internet access but i can't still connect to internet.
    One funny thing though i typed ipconfig in cmd and no ip address was found it shows something like media no connected.
    All my drivers are upto date. Downloaded directly from lenovo website. And they are all working perfectly according to device manager

    Also worked on 10.4.11. I installed an Airport Express and updated all the software and firmware on my MacBook. After Safari, Itunes store, Google earth could not connect but Firefox was connecting fine. Followed your tip. Disableing the proxies on the Network config does the trick. Very simple but very helpful, thanks.
    JC

  • Can i connect my ipod touch to internet, via a laptop that is connected to the net by a USB modem/dongle

    I have an i pod touch, which i use to facetime friends abroad when i am at home in the uk. I work on a ship and we have very limited broadband and we are not permitted to stream through company PC's. When we are in port what i would like to do is buy a USB modem/dongle (locally, as of now i am in indonesia) for my laptop, and connect to the net using that. Is it possible to make the laptop a wfi hot spot and then connect my touch so i can facetime.
    Is it technically doable?
    How much data does facetime use, and would it be an expensive way to do it?

    Yes. Google for
    setup window 7 (or the OS you have) as wofo hotspot
    See:
    http://www.geeksugar.com/How-Much-Data-Does-iPhone-4S-FaceTime-Use-23562212
    for comparison, according to one test of an iPhone 4 FaceTime call, about 3MB of data were used per minute over 3G service. Using this rule, a one-hour FaceTime phone call would use a scant 0.175GB of data.

Maybe you are looking for