IBAN Activation & Recording through SHDB-IBAN field is disabled

Dear all,
A)I have activated IBAN field in IT0009.IT0009 - table T77S0, ADMIN IBAN 'S'.
Is this correct?
B)When we enter manually we are able to to Enter IBAN 34 digit code(Here we are taken to a new screen, we are using ECC.5)
we want to create NEW BDC for Infotype 0009.
C)when we tried to create Recording through SHDB the "IBAN field is Disabled
How to record. whether any ABAP Coding is required/ how we can record.
when i check in table PA0009 IBAN field is not there . but IBAN details are there in TIBAN .Please help.
Regards,
R.Mythili

Hi,
I have activated IBAN field in IT0009.IT0009 - table T77S0, ADMIN IBAN 'S'. This is correct
I can suggest you to control from se11 whether PA0009 has IBAN field. Also you can check from se80 tha program MP000900 to see whether Iban field is valid. For example from T588M you may change the screen number to see IBAN field.
also there are some oss notes about this. For example in turkey IBAN is not generated according to one common rule. Every bank has special rule for generating IBAN and this sometimes can cause problems and customer than create a field with the help of customer include. And for this some Abap knowledge is required.
Hope it helps.

Similar Messages

Some fields are missing while recording through shdb

Dear Abapers,
I am doing bdc for F-27 t.code.Some fields,cobl-gsber(business area),cobl-kostl(Cost center) are missing while recording through SHDB.But when do it manualy the fields are displaying.Also i have ddded those fields manualy in the program,stll the fields are not getting captured.May anyone pls help me,why this problem is happening?What is the solution for this.
Thanks in Advance.

hi
i can tell u that few transactions wont suffice us with BDC,so for such transactions we do bdc with similar kind of transactions.
ie., The transactions FB60 and f-63 both are meant for Parking.
But we cant do bdc for FB60 Parking. So we do bdc for f-63.
similarly when we do bdc for vendor few fields wont appear...in that case, we use bapi for it....
So try to find an appropriate bapi or similar tcode which will suffice ur need
hope its clear.
Regards
Sajid

While recording through SHDB for XD01 mobile number and E-mail ID is not appearing

While recording for XD01 through SHDB fields mobile numebr and E-mail id is not reflecting.
Kindly do the needful.

This one is easy, try with keywords : SHDB XK01 address (always use simple words, then restrict selection if required)
(Also having solved same problem some years ago, can help too , the first time I got 653536 - Recording communication data cannot be processed version 1, SAP had not yet created/added the knowledge document to OSS search)
Regards,
Raymond

Difference in value while recording through SHDB

hi guys,
well i want to know why there is difference when i do recording. I am using the transaction 'VD01'
while recording i get
perform bdc_field       using 'BDC_CURSOR'
                              'ADDR1_DATA-TRANSPZONE'.
perform bdc_field       using 'ADDR1_DATA-NAME1'
                              record-NAME1_004.
perform bdc_field       using 'ADDR1_DATA-SORT1'
                              record-SORT1_005.
perform bdc_field       using 'ADDR1_DATA-STREET'
                              record-STREET_006.
perform bdc_field       using 'ADDR1_DATA-COUNTRY'
                              record-COUNTRY_007.
perform bdc_field       using 'ADDR1_DATA-TRANSPZONE'
                              record-TRANSPZONE_008.
perform bdc_field       using 'ADDR1_DATA-LANGU'
                              record-LANGU_009.
but the example which i am practicing there it is
PERFORM bdc_field       USING 'KNA1-NAME1'
                                  lw_customer-name1.       "Name.
    PERFORM bdc_field       USING 'KNA1-SORTL'
                                  lw_customer-sortl.       "Search Term.
    PERFORM bdc_field       USING 'KNA1-ORT01'
                                  lw_customer-ort01.       "City.
    PERFORM bdc_field       USING 'KNA1-LAND1'
                                  lw_customer-land1.       "Country.
    PERFORM bdc_field       USING 'KNA1-SPRAS'
                                  lw_customer-spras.       "Language.
    PERFORM bdc_field       USING 'KNA1-PSTLZ'
                                  lw_customer-pstlz.       "Postol Code.
    PERFORM bdc_dynpro      USING 'SAPMF02D' '0120'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'KNA1-LZONE'.
well i just want to know why do i get 'ADDR1_DATA-NAME1' but in example it is 'KNA1-NAME1' and so on to other fields.
kindly let me know what is happening here

Hi,
When you record the transaction VD01 in the initial screen a check box is there for central address managament.
If you check that box different screen will be called for the adress management, so the structures used in the screen is different.
Uncheck the check box "Use central address management" while recording you will get what you are expecting.
Regards
Praveen

Vendor Master Record: Tax Number 1 Field

Hi Everyone,
For some reason, when you enter XK01 or XK02 for creation or change of vendor master record, Tax Number 1 within the Control Tab is visible and able to be input. However, when displaying the vendor master record through XK03, the field is not visible. Reviewing the field options for vendor master record did not reveal anything to me. Any ideas why?
Thanks,
Pete

Hi Peter,
Please follow the path.
SPRO>Financial Accounting or Financial Accounting (New)>Accounts Receivable and Accounts Payable>Vendor Accounts>Master Data>Preparations for Creating Vendor Master Data>Define Screen Layout per Activity (Vendors)
click on Display Vendor(Centrally) and Double click on Genral Data and Double click on Central
check for Tax code field,its may be Suppressed
If this helps you,please assign points.
Thanks,
Rau

"Mass activity type does not exist" while i try to create a recording in SHDB for FPRW

hi,
i'm trying to create a recording in SHDB for transaction FPRW marking the checkbox "simulate background mode". When i press the buttom "start recording" i recieve the error message >6 117 Mass activity type does not exist.
Does somebody know what can i do?
thnaks

On the right click on HD under video quality to filter it.

How to check IBAN activation?

Hi all!
I have to modify a program which is quite old and which used table TIBAN_ACTIVE in order to check the IBAN activation.
Today table TIBAN_ACTIVE does no more exist. Then how to check that an IBAN has been activated? Using the date "VALID_FROM" from table TIBAN is a good way or must I look for somehing else?
Thanks for your help,
David

Use [search tool|http://www.sdn.sap.com/irj/scn/advancedsearch?query=check_iban_active] to find threads like Obsolete function module CHECK_IBAN_ACTIVE
Regards,
Raymond

How to edit LOV of the status field in activity record type?

Hi experts
I just want to edit the list of values of status field in activity record type, it is a read only filed, can anyone tell me if it is possible to edit? seems like it is referenced from a field called "EVENT_STATUS";
Thanks,
Tiger

Tiger, at this time it is not possible to edit the values in this field.

Email id input field not appearing in MK02 while doing recording in SHDB

Hello All,
I am doing a BDC recording for MK02.It is not displaying the email id input field present in the contact persons section.Please let me know a solution.We are on ECC 6.
Thanks,
Rakesh.

Hi
Please tick 'Not a batch input session' in Recording Parameters while recording using SHDB.
Regards
Sathar
Edited by: Sathar RA on Apr 3, 2009 11:25 AM

Issue with Recording Process (SHDB)

Hi Experts,
I was trying to create an LSMW object for Customer Master(XD01), So Intiallly I started recording the process of input through
SHDBRecoding process. The problem is that I cannot view some of the fields for input example in Address Details I have a field called as C/O and STREET2, which are not getting displayed while recording.
While creating the Customers normally without recording process, I have made these two fields mandatory for input. So, the fields are getting diplayed when I manually create the customers.
But, when I start the recording process, I cannot view both fields (C/O and STREET2) for input. Are there any settings to be done in recording process(SHDB) to make the fields visible and mandatory for input.
Your inputs would be certainly appreciated.
Thanks in Advance,
KishoreJ.

Hi Premal Mistry,
I beleive I was seeking help for Customer Master, But anyways if we consider the reply given by you for vendor master.
If I used the Function module 'ISIDE_SM_VENDOR_DETAILS_UPDATE', How Can I create an SHDB Recoding, in order to use it in LSMW, by Direct input or Recording method.
As I believe this is an Remote Enabled Function Module, should I create a raffer and use it as a BAPI.
As I need to upload " CUSTOMER MASTER UPLOAD" through LSMW.
Thank You,
KishoreJ.

Some of the fileds missing for xk01in recodring through SHDB

Hi all,
I want to develop bdc program to upload vendor master data through XK01, when i am recording in SHDB , some of the fields are not visible for input, like 2nd search term, time zone etc... but in normal transaction these fields are available. Could you please tell me how to get the fields which are available same as in XK01.
Regards,
Ramprasad

Hi Ramprasad,
Search term cannot be recorded via SHDB or using standard program RFBIDE00.
Instead use the below mentioned procedure separately to update the Search term2 after vendor creation.
SELECT SINGLE adrnr
         FROM kna1
         INTO ws_adrnr
        WHERE kunnr EQ ws_kunnr."input the customer number along with leading zeros
IF sy-subrc EQ 0 AND ws_adrnr IS NOT INITIAL.
UPDATE adrc
     SET sort2 = custmast-sort2
   WHERE addrnumber EQ ws_adrnr
     AND date_to EQ '99991231'.
IF sy-subrc EQ 0.
     WRITE 'Search term updated sucessfully'.
ELSE.
    WRITE 'Error updating search term'.
ENDIF.
ENDIF.
Regards,
Babul.

Selecting records based on different fields

Post Author: timg
CA Forum: General
I have three groups which I study quite often, the blues (as identified in field 1with codes), the reds (identified in field 2 with codes), and the greens (identified in field 3 with certain codes).
I want to be able to run one report which, through a parameter field, I can select the group (red, green, or blue) for which I can select records from the database and analyze. Stated another way, if I select "Blue" in the parameter field, how can I get CR to pull certain records in the correct field with the correct codes.

Post Author: yangster
CA Forum: General
dunno what your codes are but something like this will work if you put it in the section expertif ?para = "BLUE" then field1 in [a, b, c] elseif ?para = "RED" then field2 in [d, e, f] elseif ?para = "GREEN" then field3 in [g, h, i]

Set "current" or "active" record in multi-record Report or Form

Im trying to use HTML DB for the following:
Display a multi-record Report (or Form);
Mark one of the displayed records as "active" or "current", saving its PK/UK or rowid into a variable/field;
After that, select a function/process to be performed on or on the basis of this "active" record.
This is very similar to what is possible in 10g Grid Control, when, for example, you dislay (Administration/Tables) a list of tables (in a schema),
"select" one of the displayed tables, and then request, for example, to view the data in that table.
The question is, how do I define/attach the "Select" field (single-valued radio) to each of the displayed record in my multi-record Report or Form ??

Im trying to use HTML DB for the following:
Display a multi-record Report (or Form);
Mark one of the displayed records as "active" or "current", saving its PK/UK or rowid into a variable/field;
After that, select a function/process to be performed on or on the basis of this "active" record.
This is very similar to what is possible in 10g Grid Control, when, for example, you dislay (Administration/Tables) a list of tables (in a schema),
"select" one of the displayed tables, and then request, for example, to view the data in that table.
The question is, how do I define/attach the "Select" field (single-valued radio) to each of the displayed record in my multi-record Report or Form ??

Databse of 1888 Byte Per Record with 259 Fixed Fields Stumped CR?!?

My Database of 15 million records/rows at 1888 Byte Per Record with 259 Fixed Fields STUMPED CR?!
Executive Summary :
I have lots of data. There are 15 million of records in some of my database files. But I need to drill into the data and get counts for each field.
I need to know how many times each data field (row) is populated in a database file. For example, how many of my records have last name? how many have first name? date of birth? etc. I need a simple report made using SAP "Crystal Reports 2011" Workstation type edition that SUMS each data row into a single column output like csv.
My database sizes can range from 1,000 to 18 million records that are in fixed field asci format with 1888 bytes and 256 rows per record! The report needs to SUM each data field or, in the case of a data field with a minimum of twelve tables, SUM each value of a table.
My contracted CR programmer is an expert although she was new to data files this humongous. Can anyone here help us get CR to work on my data? Here was her conclusion, Crystal Reports Fail:
My file is 14.1 gb as well. However, when run through Crystal Reports, it
only returns 2,274,876 records. Therefore, I am going to assume that there
is a Record Limit for Text files of this. I searched through all the
registry settings and there is nothing that appears to be limiting it. I
went online for a while to see if there was any information on it, and just
like when I used to work there, there was nothing concrete. Business Objects
does not physically test this large of data retrieval, therefore they don't
know the exact record limits.
I'm not sure what to suggest, but I don't think Crystal Reports is going to
work for you and I wouldn't have known that from the beginning without
testing your data. I'm 99% sure there is a refund policy on the software, so
you shouldn't have any issues returning it.
Since I only specialize in Crystal Reports, I'm not sure what other software
can handle this amount of data. Possibly Cognos, but you may want to find
out from them or do some research.
If your data were in a database that can run stored procedures (like SQL
Server or Oracle) then you could write SQL to only return the counts. Then
when Crystal connected to the stored procedure, it should work, but I can't
say for sure without testing it. And I don't have SQL Server or Oracle
installed on my machine. I believe MYSQL (the free version) has a limit to
the number of records it can hold and I'm sure 8 million would be over the
limit. Also, I'm not sure if it supports stored procedures. I have used it
once before and found it extremely cumbersome and limited. I think SQL
Server and Oracle are quite pricey, so I don't think that this will even be
an option for you.

Hi Shawn,
I actually contacted the same person you did also. Summer was a Report Designer Resource here and knows her stuff and the Report Designer as much as our Developer who wrote it do.
As I suggested in my first reply is to get all that data into a real database, one that can run Stored Procedures to do all the crunching unfortunately is the only way I can see this ever working.
Windows 7 and 8 CPU's doesn't help, 64 bit may but the problem is CR Designer is a 32 bit application so it can't take advantage of the 64 bit memory addressing space.
What you could so is post your question to the forum:
[Business Decision Making with BI|Marketing Library;
This is a forum for managers or anyone who wants to have a non-technical discussion about making informed decisions with analytics tools. Ask questions and share your experiences on how to effectively utilize data to address real business problems. Experts from inside and outside SAP will be monitoring these conversations and offering their knowledge along with the broader community.
Someone in there may have another SAP product that might be able to load your flat file into a data tool that CR can report off of.
I still think a copy of MS SQL 2008 Express is your best and likely cheapest solution and then you can simply import the data into it which it has an Import Wizard that makes it relatively easy to do... Although you may have to break your file into pieces for it to be able to process also.
You need to be flexible on that data source, I doubt you'll find anything that can report off of that huge of text file.
Good luck
Don

Results Recording through QE 11 - Determine one MIC w.r.t another MIC

Hi All,
While doing Results Recording through QE11, one MIC (Say 'T') )needs to be automatically calculated ,whereas it was manually entered until now.
The value for 'T' should be picked from some Z table depending on some key fields , of whiich another manual MIC (say 'A' )value is a key field.
I can create the Function module and assign it to the MIC in formula. But I am not sure how to pick up the value for MIC 'A' at run-time.
Before saving itself, when 'calculate' button near 'T' is pressed, the FM should be triggered and it should use the value for MIC 'A' for picking value for 'T' from Z table.
Please advise if any FMs/BAPIS are there or any other method.
An F1 at 'A' yielded field QAQEE-SUMPLUS in 'Result' field and QAMKR-ORIGINAL_INPUT from 'Orig. Val' filed of which both are structure fields.
Thanks,
Neethu

I'm a maybe little late, but i will try to explain my own problem.
I'm also working for QM.
I want read data from QAQEE-ORIGINAL_INPUT and i cant and i did succed when i going to see inspection report.
I just have to make some marks in field Accessories for report and u will get data from this field.
But, if i want to read the same data in another place in sapscript i have problem.
It simple i cant get data from structure, is this because the program for form is writen for specific point when it must be write out?
Sorry for my english.
Tnx.

IBAN Activation & Recording through SHDB-IBAN field is disabled

Similar Messages

Maybe you are looking for