IBASE Bump Process - Configuration change
Hi,
we are configuring the IBASE process for bump processing.
http://fmis.minfin.bg/help/EN/50/b6d83855a1df4be10000000a11402f/frameset.htm
I am basically aware of the main configuration and the processes as well how it should work.
It does also work nice in our Sandbox (configurations done long time ago by others) and now I have transferred that into the real business scenario.
Unfortunately in the bump process I can not change the IBASE configuration values. The sales order nicely picks up all the required information but I am facing the problem that the configuration of the characteristics stay gray, no maintennace possible.
I have checked all the master data, equipment configuration, item category etc. I do not know what controls the possiblity of maintenance.
I must assume that it is something in the serial number creation (equipment) that says it is final and does not allow the bump process.
Anyone an idea? I have not found much helpful user or consultant information by now about those topics / issues.
Thanks and best regards,
No ideas?
Similar Messages
-
Approval Process configuration in Change Request Management
Hello Gurus
We are currently configuring Change request management. We successfully activated charm, we are now working on approval process of change request management.
I am following the following sim for the approval process configuration:
https://websmp105.sap-ag.de/~sapidb/011000358700002931432006E.sim
Can any one please assist us by guiding us on the following things?
1. From BASIS point of view we have assigned roles to each user as employee e.g. developer charm (SAP_SOAM*) role to developer user\employee in solution manager, still when we are creating tickets then we cant see the options like in development, in process etc
2. We are going forward with the default settings can any one tell us if we need to do something extra to get all those options activated like in process, in development etc
I am in mid of these configuration settings; please assist me asap if possible.
Thanks in advance,
Regards,
SharmishthaHello
Thanks for your reply,
I have used BP to create and process change request. Only confused with the standard process and where to look for the change documents, thats the reason i couldnt see the requests and change their status.
I just want to know if you have customized any thing in to the standard configuration, say for e.g. if you want to add your own actions like in maintenance cycle after requests been released in development if you want to import automatically in QA which happens in case of Urgent corrections. What I need to do if I have to do such settings or change it in my standard configuration.
How can I change this standard configuration? Anyone has done such kind of customization?
Thanks for your help and more help on this topic will be appreciated.
Regards
Sharmishtha -
Anyone Seen this Message Before "Configuration changes for domain saved to the repository."
I'm running into this situation where one of my WLS servers is generating the following
messages "Configuration changes for domain saved to the repository." This process
of saving to a repository is causing an issue on start-up. Typically my deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I've made no changes
to my application. I've been able to identify that this process of saving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable this message?This is just WebLogic writing back changes to config.xml, which it does from time
to time for reasons like:
- your app deployment has changed.
- you've reconfigured something in the console.
etc...
WebLogic just spins this off into a handy execute thread, so it would be surprising
if this was causing your app deployment to slow down (how do you know it is).
In my experience, slower than normal app deployments are usually down to:
- waiting for database connections.
- waiting for connecitons to other external resources.
Remember (in WLS6.x anyway) initialisation is done serially on the main thread,
so if something's slow, everything gets blocked behind it.
simon.
I'm running into this situation where one of my WLS servers is generatingthe following
messages "Configuration changes for domain saved to the repository."This process
of saving to a repository is causing an issue on start-up. Typicallymy deployments
take 2-3 minutes on start-up. They are now taking 10 minutes. I'vemade no changes
to my application. I've been able to identify that this process ofsaving to a
repository is the main issue of contention....
Anyone know what the message means? Anyone know how to disable thismessage? -
Define Tabs and Process Configuration for Template
Hi All
I would like to give the local HR the ability to define Tabs and Process Configuration for Template
The only way I can find to create these definitions is using SPRO and I don't want to give HR users SPRO
Is there a transaction which will allow the HR users to define Tabs and Process Configuration for Template?
Thanks
MayaYou can try this URL:
http://server.domain:port/sap/bc/webdynpro/sap/hap_configuration?WDCONFIGURATIONID=HAP_AC_TAB_CONF
Just change server, domain and port to match your SAP instance. -
STMS Configuration - Change Virtual System with Real System
Dear all,
My system, if I go in the transaction STMS in DEV system, was configureted in the following way:
DEV => QA => PROD (Virtual System)
Now, I want to change the PROD Virtual System in PROD Real System.
How Can procede?
Can you explain step-by-step the process?
Because the system was configureted from other people, and I'm new to using the STMS.
Thanks in advanced for your help.
Best Regards,
GiulioHi,
After the planned system is physically installed it is time to replace the Virtual System with the realized system.
The procedure for the same is as under:
1) Delete the Virtual System from the transport domain
. Login into Transport Domain system client 000
· Using STMS got to Overview=> Systems
· Chose SAP Virtual System=> Delete (confirm)
· Distribute configuration change.
As soon as the configuration change is distributed, the virtual system is deleted. The import queue for this system in TMS disappears but it is available as import buffer at the operating systems level.
Now add the new (physical system) to the transport domain:
If STMS is configured as standalone system then first delete STMS configuration on PRD system
login into PRD system client 000. (delete STMS configuration if present.)
run stms -> it's ask for set up STMS -> click on other configurition (F6)
Target Host -> host name of domain controller ( host name of transport domain system)
System number -> Instance number of domain controller ( instance number of transport domain system)
Now,
Go to the Transport Domain Controller and accept the system. (As the import buffer is available at the operating system level, no change requests will be lost)
Distribute the configuration changes.
regards,
kaushal -
I am receiving event ID 5189 on Server 2008 R2, IIS 7.5. I experience this error across a number of servers, each of which is running only the default web site, but have 600+ applications running on the default web site. Each application
has its own application pool. My point is, the applicationhost.config is rather large.
I have seen a number of posts on this error message, but my issue itself seems to differ somewhat. I am aware of a similar post: http://social.technet.microsoft.com/Forums/en-US/3128ee93-1319-4cc2-9257-003512caf476/event-id-5189-microsoftwindowswas?forum=exchangesvrgeneral
which points to KB http://technet.microsoft.com/en-us/library/cc734988%28v=ws.10%29.aspx
However, in my case, it doesn't seem that the extreme measures for this resolution are required. The error usually indicates a corrupted applicationhost.config that must be manually fixed, or otherwise the WAS service needs to be restarted, or the
server itself, etc.
In my case, the issue can usually be fixed by an application pool recycle, or at worst a stop/start. I have an application which is sensitive to recycles, and so we do not have periodic recycle events configured for this application, which is the bulk
of the applications on the servers. It seems to me that this issue is usually caused by the application being in use when there is an applicationhost.config change.
For instance, we have one application that we deploy using msdeploy. We found that when we ran an installation for this application via msdeploy, we were receiving this event, and we would subsequently get 500 errors in the application (sometimes the
application pool corresponds to that which is identified in the event log, sometimes it doesn't). It seems like applications that were being hit at the time the applicationhost.config was modified by msdeploy were affected. In an attempt
to correct this, we moved from msdeploy to a batch file containing appcmd commands. This also did not resolve the issue.
I have another application which is installed using PowerShell commandlets. We started to notice that this script also caused the issue to occur on occasion. As I continued to identify different processes that resulted in the same issue, I came
to the conclusion that this is likely due to any change in the applicationhost.config. I assume the issue is that the applicationhost.config is modified during a read operation to the file by the application pool, or WAS service, and that the recycle
event, which corrects the issue, forces a re-read of the applicationhost.config, resolving the bad-read issue.
Has anyone else experienced this, or do you have any recommendations? My current work-around is to not install any applications during peak hours, and performing an IISRESET after installs are completed, to ensure application stability.
Message : The Windows Process Activation Service failed to generate an application pool config file for application pool 'myAppPool'. The error type is '7'. To resolve this issue,
please ensure that the applicationhost.config file is correct and recommit the last configuration changes made. The data field contains the error number.
Id : 5189
Version : 0
Qualifiers : 49152
Level : 2
Task : 0
Opcode : 0
Keywords : 36028797018963968
RecordId : 324108
ProviderName : Microsoft-Windows-WAS
ProviderId : 524b5d04-133c-4a62-8362-64e8edb9ce40
LogName : System
ProcessId : 0
ThreadId : 0
MachineName : MyComputer
TimeCreated : 3/3/2014 9:03:24 PM
ContainerLog : system
MatchedQueryIds : {}
Bookmark : System.Diagnostics.Eventing.Reader.EventBookmark
LevelDisplayName : Error
KeywordsDisplayNames : {Classic}
Properties : {System.Diagnostics.Eventing.Reader.EventProperty, System.Diagnostics.Eventing.Reader.EventProperty, System.Diagnostics.Eventing.Reader.EventProperty}As an update to this issue, after doing some research, it appears the behavior is related to a new feature in IIS7 called Application Pool Isolation (http://technet.microsoft.com/en-us/library/dd163536.aspx).
This new feature prevents cross-application spillage by isolating the configuration for each application pool in IIS. So in reality, an application pool never actually reads the applicationhost.config - that is just a master file, and each time it
is update, it triggers a change to the individual application pool configuration files, located in C:\inetpub\temp\apppools.
We did try setting Advanced Settings > Disable Recycling for Configuration Change to true, but after an IIS reset we were still able to reproduce the issue - worse actually, because in our test program, which continually hits the web
service, and also continually makes apphost.config changes, when the two events collide, the 500.19 issue precipitates; but after an additional change to the apphost.config, it seems that the additional changes will actually correct the issue (seemingly forcing
another recycle, which is also how we resolve the issue manually); after making this setting adjustment, once the 500.19 issue precipitates, additional changes to the apphost.config does not correct the problem, only a manual recycle corrects it. This
is the recycling.disallowRotationOnConfigChange property of the app pool. We also set the setting for recycling.disallowOverlappingRotation to True as well, with the same result.
We ARE able to prevent this issue by setting the C:\inetpub\temp\apppools\myapppool\myapppool.config to read-only, but for obvious reasons, this is not a desired work-around.
It seems like what is happening is that any change to the ApplicationHost.config is resulting in each of the C:\inetpub\temp\apppools temp application pool config files being updated as well, in addition to triggering an application pool recycle. It
seems to me the desired behavior would be that these files are only updated if the applicationhost.config changes are specific to that application pool - but that doesn't seem to be the behavior.
After turning on failed request tracing, I was able to narrow the error down more:
ModuleName
AnonymousAuthenticationModule
Notification
2
HttpStatus
500
HttpReason
Internal Server Error
HttpSubStatus
19
ErrorCode
2147942413
ConfigExceptionInfo
\\?\C:\inetpub\application\application\web.config ( 9) :Failed to decrypt attribute 'password'
Notification
AUTHENTICATE_REQUEST
ErrorCode
The data is invalid. (0x8007000d)
This seems to be pretty static. Trying to look into possible causes of this issue. -
Performance Mgmt - Define tabs and process configuration for templates
Hi,
I would like to utlize the feature of process/phase/step configuration for appraisals by the Web Dynpro configuration for tab and process. I choose the "Process Configuration" tab, enter my appraisal template and period, and click "Start Selection". A warning is displayed "No process defined for <my appraisal template>". Clicking on "Add" and no matter what I did, I don't seem to be able to maintain any process/phase/step into the "Configure Available Elements for Process" table. What is the pre-requisite to maintain and configure the Process/Phase/Step(s) ?
How do I maintain the in preparation, in planning etc statuses in here, I created templates using SAP defined templates for ex: templates for performance feedback etc., statuses are maintained in there by default.
Can you please suggest anything?
Thanks
Murthy>
Munna wrote:
> Hi,
>
> I would like to utlize the feature of process/phase/step configuration for appraisals by the Web Dynpro configuration for tab and process. I choose the "Process Configuration" tab, enter my appraisal template and period, and click "Start Selection". A warning is displayed "No process defined for <my appraisal template>". Clicking on "Add" and no matter what I did, I don't seem to be able to maintain any process/phase/step into the "Configure Available Elements for Process" table. What is the pre-requisite to maintain and configure the Process/Phase/Step(s) ?
>
> How do I maintain the in preparation, in planning etc statuses in here, I created templates using SAP defined templates for ex: templates for performance feedback etc., statuses are maintained in there by default.
>
> Can you please suggest anything?
>
> Thanks
> Murthy
Hi Munny, I am experiencing the same condition. I have released my template and when I go thru the IMG to the 'Define Tabs & Process Configuration' selection I get the browser screen for setting up the tabs and process. I click on the Process tab and see the screen but the New and Delete buttons are not active (grey'ed out). I toggled my review template (cancelled release and re-released) to see if it changed the symptoms but it did not.
All - are there other conditions that must be met before setting up the Process steps vis the IMG ? I have all of the Status/substatus config complete and it shows up in the right side, but I cannot add anything to the left side to define the process.
Chris Thomas
Duke University -
Process to change IP of the Replication Applicance
Hello VMware Community,
I'm looking for a little guidance here. What would be the recommended process to change the IP of a replication appliance?
We find that when we change the IP of the appliance via the "Network" tab in the VAMI; the web GUI is no longer accessible even after a power cycle using the newly assigned IP(The IP changes successfully). If we attempt to change the "Configuration" on the VR tab to specify the new IP prior to the IP change of the appliance itself we get the same behavior. Any advice is appreciated.Hello,
Can you clarify which VR version you are using?
-Appliance Version: 5.5.0.0 Build 1309877
Can you also clarify "the web GUI is no longer accessible" - is this about the VAMI UI or the VR UI plugin in the Web Client?
-This is about the VAMI UI. Once the IP change is saved via the VAMI UI (change is confirmed via the console/VSphere client). The new x.x.x.x:5480 address is not resolvable; we simply get a timeout.
To give a bit more information once we assign the new IP, gateway, dns information, etc... The VAMI UI times out (as we would expect as it's IP has changed), but after the appliance has been power cycled we still cannot access the VAMI UI using the newly assigned IP. SRM cannot see the appliance either as we cannot specify the IP via the "Configuration" section of the VR tab.
If we revert all the changes, and assign the old IP back to the appliance everything works as expected.
Thanks! -
SG 200-08 - configuration changes disappear on power cycling
it's my first smart switch, but i've set up a million routers, so i'm not a complete n00b.
the only change that survived power cycling is the change of default password that it forced me to do.
what am i doing wrong, or is the box defect?You will need to save your configuration changes before exiting the switch. Below are the steps to do this taken from the Admin guide.
THANKS
Rick Roe
Cisco Small Business Support Center
Copying and Saving Configuration FilesThe
Copy/Save Configuration page enables you to copy files within the filesystem. For example, you can copy the Backup Configuration file to the Startup
Configuration file so that it will be used the next time you boot up the switch.
To copy a file to the Startup or Backup Configuration file:
STEP 1
Click Administration > File Management > Copy/Save Configuration in thenavigation window.
STEP 2
Select the Source File Name:
Running Configuration
—Current configuration, including any changesapplied in the current management session.
Startup Configuration—Configuration file type used when the switch lastbooted. This does not include any configuration changes applied but not yet
saved to the switch.
Backup Configuration—Backup configuration file type saved on the switch.
Mirror Configuration—If the Running Configuration is not modified for atleast 24 hours, it is automatically saved to the Mirror Configuration file type,
and a log message with severity level
Alert is generated to indicate that anew Mirror Configuration file is available. The Mirror Configuration file can be
used when the switch has problems booting with the Startup or Backup
Configuration file types. In such cases, the administrator can copy the Mirror
Configuration to either the Startup or Backup Configuration file type and
reboot.
STEP 3
For the Destination File Name, select the file type to be overwritten with the file
you are copying:•
Startup Configuration—Configuration file type used when the switch lastbooted. This does not include any configuration changes applied but not yet
saved to the switch.
Backup Configuration—Backup configuration file type saved on the switch.
STEP 4
Click Apply to begin the copy process.When complete, a window displays the message, Copy Operation Successful. -
About the role of process configuration files
I have done some customizations in process template XMLs. I have done my major changes only in the work item type definition XMLs. I am wondering about the role of process configuration files or category definition files. When do I really need to update
it?
Thanks
DivyaHi Divya,
Thanks for your post.
If you only did the changes on fields/controls in work item type, usually you needn’t update the process configuration and category files.
If you want add your work item type display in team project Web Access
Backlog board or Task board, you need to update the process configuration and category files, please refer to the detailed information in this document:
https://msdn.microsoft.com/en-us/library/jj920163.aspx.
Or you want add a backlog to portfolio management, you need to update the process configuration and category files, please refer to:
https://msdn.microsoft.com/en-us/library/dn217880.aspx.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Help me configure Change request management !!!
Dear friends,
I am Going to Configure Change request Management, so just to ensure that the configuration is not erronous, i would need Expert advise..
Just want to know Clear few things before i proceed..
I am also refering SPRO and related notes
Scenario :
I have two SYSTEMS SAP ECC 6.0 with System id R03 and Soluiton manager with SYSTEM id SOL,
R03 has 3 clients, 300 600 700..
In R03 300 is the development client, 600 is quality client, 700 is the production client.
SOL has 2 clients, 100, 200
With 200 as the production client.
Q.1) <b>Do i have to configure CHARM in both the client (100 and 200 of SOLMAN).</b>
Q.2) Initially I had tried to set CHARM in client 100 of solman, but later on realized that it has to be set up in client 200.
When i logon to client 200 and Execute IMG activity Spro-> sap soltion manger->basic settings-> sap solution manager system->activate integration with change request management.
Then by default it take the previous client ( client 100) as the change request management client.
( as we know there are three steps in the above activity ), the other activity are executed properly, only prblem being that the default client is always set to 100, which should not be the case).
I do get the prompt saying ( "The change request clent is set to clent 100, do u want to change to client 200, on clicking yes, still it is always set the same client 100 as charm client ")
<b>Plz let me know what do i do to set the change request client to 200??</b>
Q.3) Regarding TMS, we have local domain controller in solman and local domain in R3.
We are planing to establish domain links between the two systems( ie both the domain controllers) ??
Is this the right strategy ??
<b>Any other method that u can recommend ??</b>
Q.4)One of the IMG activity says, Generate Destinations to client 000 of all the domain controllers..
Whenever i do this these, destinations are created with errors, i am not able to create trusted RFC destinations without errors.
When i logon to satellite domain controler and excecute sm59 there are 2 destinations created Trusted and BACK.
These destinations works well,
but when i logon to Solman, got to sm59 , when i test the TMW and TRUSTED rfc destinations i test these destinations using Remote Logon i get error,
" no authorization to logon as trusted system"
I went thru one note which recomended Kernel upgrades to solve the problem,
I r3 my kernel relaese is 700 with patch level 56, the note recomends to apply patch 80, did u have these problems??
<b>what is your kernel patch levels in sateliite and solman systems.</b>
Q.5) TO be able to raise tickets from R3 to solman we create RFC destinations.
We also create RFC destinations to client 000 of all the sateliite system,
<b>dont u think these RFC destinations might interfere with each other??</b>
Q.6) Is there anyone who has successfully configured CHARM. Can you plz share the configuration documents with me..
Please note :
<b>All the contributors would be handesomely rewarded with points .</b>Hi,
Check this
Note 128447 - Trusted/Trusting Systems
For your Q4.
Q3.)
Establishing Domain link - That's the right way. Go ahead.
These are the steps.
<b>1.Define Transport Routes for System Landscape</b>
assign exactly one development system to a production system, and that these two systems are connected by exactly one unique transport track. If a development system and a production system are connected by more than one transport track, this may lead to inconsistencies within the transport distribution. This type of transport configuration cannot be supported by Change Request Management, and may cause inconsistencies within the tools involved.
<b>2. Activate Extended Transport Control</b>
The CTC parameter should be '1'
<b>3.Configure Transport Strategy</b>
Deactivate the QA Approval.
<b>4. Activate Trusted Services.</b>
5.Activate Domain Links.
You have to activate domain link between systems.
6. Generate RFC Destinations to Client 000
Hope this helps.
feel free to revert back.
--Ragu -
IPC:bute in the field catalogue while processing configuration or pricing i
Hi,
I get this error (Message Class: PRC_MESSAGES_EXT (Messages for Calling Public Pricing Modules), Message Type: E, Message Number 099, Message variables: Message variables 1-4: IPC:bute in the field catalogue while processing configuration or pricing in context spe.condmgnt.customizing.dba.imp.AttributeClassObjectManager.createAttributeClassAttributeClassObjectManager.java)
when we ran IPC userexits.
We've added a field ZZPSTYV in the communication structure and modified the method to define this field like follows:
public String[] determineRelevantAttributesForRequirement(
boolean headerAttributes,
int reqNo) { String[] relevantAttributes = new String[0];
//Header?
if (headerAttributes) { }
//Item
else {
//KOMP fields
switch (reqNo){
case 900: relevantAttributes = new String[] {"ZZPSTYV" }; break;
return relevantAttributes;
Running this code we get the above listed error. Same error if we define unnecessarily a standard field, such as SOLD_TO_PARTY in place of ZZPSTYV.
Can anyone give us some advise as what we did wrong? Appreciate it very much,
YanhuiHi Yanhui,
Is it a item field? Remember that mixed fields should be declared at the header in the IPC.
Missing any other requirements?
Cheers
Andrew -
Logging CRS configuration changes
Hallo,
in a 10.1 RAC environment,
is there a file which logs CRS configuration changes, like issuing a oifcfg -setif command?
ThxYes
-
Hi,
Can any buddy tell me the Bapi used for Process order change
with following scenarios:
Quantity change
Resource change
Rescheduling
Control key change
RM Change
Recipe change
TECO
REVOKE
Material shortage check
Best Regards,
Sheetal.Hi,
BAPI_PROCORD_CREATE for process order create
BAPI_PROCORD_CHANGE - Change Process Order
BAPI_PROCORD_CLOSE - Close Process Order
BAPI_PROCORDCONF_CANCEL for Cancel Process Order
Confirmation.
BAPI_PROCORD_COMPLETE_TECH - Complete Technically
BAPI_PROCORD_RELEASE - Release Process order
BAPI_PROCORD_SET_DELETION_FLAG - Deletion Flag
BAPI_PROCORD_REVOKEUSERSTATUS - Cancel User Status
BAPI_PROCORD_SCHEDULE - Carry Out Scheduling
pls refer below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/200dd1cc-589e-2910-98a9-bb2c48b78dfa
http://help.sap.com/saphelp_nw04/helpdata/en/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
Regards,
Sankaran -
I'm trying to determine if I am dealing with an RFC connection issue or just an error resulting from the RFC itself.
The error says "Processing of change number...cancelled (raised by...ECCHostXYZ)".
I thought this was a problem with my RFC config because it is labeled as "RFC_ERROR_SYSTEM_FAILURE".
However, when I google that specific message, it appears to be an error specific to change order creation.
Here’s my google search: http://goo.gl/ZhKsm3
Here is the error again:
RFC_ERROR_SYSTEM_FAILURE: Processing of change number CO-01234 cancelled (raised by system ED1|ecc-host-xyz)
When I check ST22, I see no RFC errors.Hi Jody,
No st22 exception is needed to be throwed in order to raise a controlled exception in the RFC.
You would need to check the RFC in the ECC system with the data that you are sending from PI, if the data is the same, you would need to check PI user RFC roles with the ECC roles user that you used to check the data integrity in the ECC test.
To avoid this error you can do a Z RFC to wrap the standard RFC and to control the exceptions errors with a BAPIRET2 strucutre to return to PI.
Hope this helps.
Regards.
Maybe you are looking for
-
How do I open a PDF file in my browser instead of in Adobe Reader?
Windows XP SP3 Adobe Reader 11.0.3 SeaMonkey 2.19 (which has the same internal "guts" as Firefox 22) It used to be that, if I selected a link to a PDF file from a Web page, the file would open in my browser. Now, it opens in an Adobe Reader window.
-
Hello I bought a movie " The Help" from Itune store and for the past month the download is stuck at 906.3MB out of 4.89GB !!! I have tried to delete it but it always come back but never finishes the download. Can anybody help me please ? I would like
-
Can Any one help on that how to use MS office or upload MS office in 5233. I am not able to open excel or ppt file on my 5233
-
Is apple gonna do something about our battery?
Hello, Doens anyone knows if apple is planning on doing something real about the iphone 4s battery problem? Its my first Iphone and I already regret from switching from the android. All those features have no use if the battery can't stand more then
-
My message sounds are not working, or my game sounds...but my video is?