Ibase Component Tab is Empty while creating POD from CRM
After doing certain actions in CRM where the ISU tab is displayed for a BP, after performing the action (for example, creating a POD) the ISU tab does not disappear (as it used to). Instead, a blank screen displays that requires the user to close the screen. This should close automatically, as it used to.
Hi,
Have you defined any inventory organization at all.
Only the Inventory organizations appear in the LOV.
If you have, then probably you need to setup the org access.
Thanks,
PS.
Similar Messages
-
Significance of IBase, Component and Product ID while creating Change Reque
Hello,
When we create a change request via SOLMAN_WORK_CENTER, we are supposed to provide values for
1) IBase
2) Component
3) Product ID
Ibase can be defined as the way SAP differentiates in a multiple system (APO, CRM, ECC) environment, the corresponding environment.
The values corresponding to IBase can be obtained via IB51,52 and 53 tcodes.
Can the value for IBase obtained via SMSY t code also?
What does component and Product ID signify?
Where can we get values for Component and Product ID?
Is Product ID the same as value we get from menu Option System->Status->Installation Number
Is it necessary to provide all 3 values (i.e. IBase, Component , Product ID) while creating change request?
If Not, how will SolMan identify which system the change should point to?
Or only value for Ibase is enough?
Thanks,
VikasIbase can be defined as the way SAP differentiates in a multiple system (APO, CRM, ECC) environment, the corresponding environment.
The values corresponding to IBase can be obtained via IB51,52 and 53 tcodes.
Can the value for IBase obtained via SMSY t code also?
No
What does component and Product ID signify?
Product ID is not mandatory. I actually hide it in the CRMD_ORDER screen.
Where can we get values for Component and Product ID?
Is Product ID the same as value we get from menu Option System->Status->Installation Number
Component - IB52 as you already mentioned
Product ID - in a customizing table, I've seen it once but can't remember where honestly. As stated, I don't bother with the field
Is it necessary to provide all 3 values (i.e. IBase, Component , Product ID) while creating change request?
The iBase and component are mandatory, odd thing is if you enter the component without entering 1 in the iBase, SolMan will fill the 1 in for you.
If Not, how will SolMan identify which system the change should point to?
By the logical components assigned to your maintenance project. You can actually have transports for more than one production assigned to your change document. For instance you could have a BI and ECC transport assigned to the sane change document. Your tak list will have the dev, testing and production systems for each logical component assigned.
Or only value for Ibase is enough?
I was having this discussion with someone the other day. Since the logical components assigned to the mianteance project really determines what systems you can create transports for, what is the value of the component field? Best I could determine was when you use the Logon on to System action, it points to the one listed in the component field only. other than that, I'm not sure. -
Error while creating datasource from view ZBSIS_VIEW
Hi all,
I could not create the datasource on the database table BSIS as it said "Invalid extract structure template BSIS of Datasource". I had suggestions that I should create a view and then create the Datasource on it. So I created the view and tried. But still I am facing an error message while creating datasource from custom Database View ZBSIS_VIEW.
"Invalid extract structure template ZBSIS_VIEW of DataSource"
Can anyone help on this regard.
thanks.Hi,
Yes. You need a create a view on tables BSIS, BKPF and T001 as the currency/quantity fields in BSIS have reference fields from the other 2 tables.
In BSIS, in the currency/quantity fields tab, you have some ref tables and fields. You would need to include these tables and join in the view. You would also need to include the ref fields like WAERS, HWAE2, HWAE3, etc in the view. Then you would be able to create the datasource. -
Error has come while creating USER from SU01
Dear Expert,
I have got typical error while creating user from T-Code SU01.
Problem is like that : I suppose to use SU01 and "User Maintanace: Initial Screen
has come. Now I put the new user name like ABAP2008 or FI2008 (what ever the name thats hardly matter) and click on CREAT button then next screen Maintain User has been appeared.In this screen Address TAB is on and asking for fillup all the required user information.So I have been made all information like :First name /Last name /Tele ph/Fax / email etc etc. After complete this tab when I clicked on next tab is called "LOGON DATA, it has been given a error "Specify a valid country indicator
Message no. T5027" . Even thogh I didn't able to go to next screen LOGON DATA.Because of these problem I doesn't able to creat a user.
SAP : IDES version ECC 6
DB:SQL2005
OS: Windows 2003 server
Please do the needfull
Thanks & Regards
PavelHey Pavel,
Are you using ECC with ISU.. ? I am not sure but I feel your issue can be solved with information provided in SAPnote,
Note 1046566 - EC70: address-independent telephone number no country.
The system does not transfer any country from the master data template with the address-independent telephone number. The system issues the warning message T5027 "Specify a valid country indicator".
All the best ! -
Error while creating subsite from site template
Hi,
I am getting below error while creating subsite from existing site template .
Sachin BhosaleThere must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
to the following blog post for more information
http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
Cheers, -
PS: WBS is not flowing for a Material, while creating delivery from Project
Hi,
While creating delivery from Project thro CNS0, WBS is not flowing for a Material in delivery, in turn WBS is not flowing in Billing document for same material, in turn not allowing to Post the Billing document to Accounting.
Error while releasing Billing to the Accounting: Accounting Entry is not generated. Error Message:Assign Condition type
YMRG in COPA.
Pls let me know, what can be the reason ?
Thanks.
Amit.Hi Kuldeep,
Check this note,
Note 159387 - Message BP603: incorrect line item is displayed
Its valid only till 4.6. Might give you some idea but.
Regards,
Gokul -
Error while creating datasource from table MBEWH
Hi all,
I am facing an error message while creating datasource from table MBEWH
"Invalid extract structure template MBEWH of DataSource "; This operation failed, because the template structure quantity fields or currency fields, for example, field LBKUM refer to a different table.
Can anyone help me that why system is not allowing me to generate generic datasource for table MBEWH to transfer my month wise inventory data.
thanks and regards.Hi Zakir,
This was comming for classification data... when ever you want to extract some classification related data then we can't create generic datasources directly.. for that you need to go with CTBW ( tcode ) and create one datasource...
so, you need to check that related table also.. for that MBEWH table..
ALL THE CLASSIFICATION RELATED DATASOURCES WE CAN'T CREATE DIRECTLY... JUST LIKE AUSP table also.. liek this..
regards
@jay -
Error while creating DTP from DS to Infoobject
Dear All,
I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
Issue:Enter a valid value
Msg No:00002
Procedure: Display the allowed values withF4 and correct your entry,
Regards,
SatyaHi Satya,
Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
I don't find any specific problem or any patch problem with the error you are getting.
Hope it helps !
Regards,
Rose. -
Password Violation error while creating users from Admin interface
Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
VijayGuys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay -
Budget error while creating delivery from sales order
hi Gurus,
System is throwing error PB603 "Item 004 WBS element ABC-XXX budget exceeded" while creating delivery from sales order.
I am picking material from unrestricted plant stock (not in project stock).
I am also confused as sales order has 3 line items & error shows Item 004 !Hi Kuldeep,
Check this note,
Note 159387 - Message BP603: incorrect line item is displayed
Its valid only till 4.6. Might give you some idea but.
Regards,
Gokul -
Getting Error ORA-00604 While Creating View from front Ent
Hello All,
I am getting ORA-00604 while creating view from the front end. And some time I get Maximum cursor open, It is ok amy be I am opening cursors in while loop. While ORA-00604 is giving lots of truble to me. In help it said to contact Oracle service, I dont know how to do that. Help me.Please post your view definition including the complete error_message and also the relevant parts of your code with the while loop.
-
Error appearing while transferring products from CRM to R/3.
Hi All,
I am facing a problem in CRM system while transferring products from CRM to R/3. System is throwing a message "Exception condition NO_STRUCT_DEFINITION raised" and product transfer is not happening.
Please suggest some solution.
Thanks & regards,
Rupam.Hi Arup,
Thanks for your assistance once again.
I have checked the 'CRMRFCPAR' table entries in R/3 system. One entry with 'Send XML=M' is present in that table.
No error Bdoc exists in system, the existing Bdocs are showing as successfully processed in the transaction 'SMW01', The queue name corresponding to the Bdoc is 'CRM_PRODUCT_IP'.
I have also checked the transaction 'GENSTATUS' .There is no object with status red, instead of that two objects are existing with green status.
Can you please tell me how to verify, whether parent object ('DNL_CUST_PROD0') has been successfully loaded or not?????
Eagerly waiting for your valuable suggetions.
Thanks & regards,
Rupam.
Edited by: rupamsap on Mar 19, 2010 9:46 AM -
Create Reconnection from CRM Web-IC for Utility
Hi Experts,
We have set up an Interaction Center for Utilities. If a utility customer calls the center for reconnection/ disconnection of his meter request, then the IC Agent logs in with a business role assigned to him, identifies and confirms an account.
We can't create a disconnection document in CRM itself. We would perhaps need to use a Transaction Launcher.
However, is there a standard way of creating Reconnections from CRM Web-IC?
Thanks
AvikHi,
If we want to create disconnection/reconnection from crm web UI than we can use transaction launcher, otherwise we have to proceed in isu to create disconnection/reconnection document and order.
Because we do not have any such process in CRM to complete the process of disconnection/reconnection.
Or else you can create a notification from CRM than further processing can tak place in ISU.
Regards,
Ripunjay. -
Shipping data tab not appearing while creating intercomapny STO PO
Hi all,
I am processing the intercompany stock transfer scenario. I have done all the necessary settings for the plant and intercompany billing, but while creating the purchase order I am unable to get the shipping tab as the system cant read the shipping data for the respective vendor. In turn I cant see the purchase order in VL10B.
Kindly help in this.Hi,
1. Please check in your vendor master in T-code XK03
2. In vendor master , the plant might have defined as plant as vendor in Tab purchasing data > Extras >additional purchasing data,
3.If plant field is not appearing there then change plant field in vendor account group field status maintenance from suppress to optional & maintain in vendor master.
Regards,
Ajit -
Hi all,
while creating a POD using RFC IVIEW_SM_PROOF_DELIVERY_POST following error has been occured.
Error:
No personnel number record found in the HR Master entry for userid mobileoinfoimho a simple password protected Access database file is not supported as linked server target. You can use
OPENROWSET() to specify a connection string with a database password instead of it.
Do you know this for a fact? Link?
Generally whatever you can OPENROWSET reach(access) can be setup as Linked Server.
SSIS import/export wizard may come to the rescue:
http://www.sqlusa.com/bestpractices2008/administration/ssiswizardicon/
Kalman Toth SQL SERVER 2012 & BI TRAINING
New Book: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2012
Maybe you are looking for
-
Ipod 5G 60 GB will not connect to itunes or Disk Utility.
Mac OS X 10.6.8 and latest itunes. Ipod charges but will not connect. Tried the 5 R's ect. I'm pretty ipod/phone and apple savyy and I'm stuck. Tried multiple computers/cables/ports ect. Don't mind reformatting and starting over. Thoughts? I hear thi
-
Making sure the colors are accurate in photoshop
Lately, my finished photoshop phot looks differen when I view it in Picasa, or ipad, or iphone. Is there a way to set the balance in photoshop to guarantee it is accurate?
-
I'm trying to import contacts from MS Outlook 2002 to my address book via a csv text file. Apple Help says to make sure that csv files do not contain line brakes, but it doesn't say what is supposed to separate lines (i.e. contacts) in the file. Any
-
Sharing the dimension vs creating a new one
Hello - We are in the process of adding a new cube in our existing appset. This new cube could potentially share one of the dimensions from the existing cube. Plan is to make this shared dimension secured so that we can limit the access of dimension
-
Where can I get a tutorial to make an application with a power builder
please help me:)