IBASE instance number

How to get IBASE instance number, when I am saving a sales order?

https://forums.sdn.sap.com/click.jspa?searchID=21578232&messageID=6856574
see whether this could help you.

Similar Messages

Order Number using Instance Number

Hi All,
The job log for a cancelled archive write job (Sales Order Archiving) says - There is no entry for instance 000000000004589144 in either INOB or IBase.
I am trying to find out what is corresponding order number for this instance number? Any ideas on which table i should be looking at?
Thanks
Janani

Check transaction CUTABLEINFO and insert the instance number you have into the Instance(CUOBJ) field. Be sure to check at the very least at the bottom of the screen the check boxes for IBINOBS and IBINOWN.
The owner of the configuration is the object that originated the instance. An observer of the instance is simply an object that needed a copy of the characteristic values in the instance. If any transaction can find your instance's owner, it's this one.
Cheers.

How can I correlate an Java instance number with a server id?

I have 6 Web App Server running ABAP and the JAVA stacks. I can log into the Central Instance server and run /usr/sap/<SID>DVEBMSG00/j2ee/configtool/configtool.sh and bring up the GUI interface to "see" all the instances and their variables. I don't see an easy way to trace back the Java INSTANCE to the physical server's hostname.
Is there a central repository to correlate a Web App Server Java instance number to the actual hostid/hostname of the target server? I realize I can log into each Web App Server and look at the /usr/sap/<SID>D00/j2ee/cluster/instance.properties and find the Instance number, but I was wondering if this information was held in the SAP Central instance or SAP Database somewhere.

Hi Timothy,
The instance ID used for the JAVA cluster is generated at installation time, and -amongst other things- takes into account the time it was generated. We installed two instances in parallel (on different hosts) and ended up with almost the same instance ID.
Because this can be very confusing, we asked SAP if this was changable - in theory it is only an ID which could be changed as long as it is updated on all places the identifier is stored - but SAP indicated that that is not possible, nor supported. We ended up with a diagram of the system architecture with all the identifiers on our desk.
Note that in the config tool - all instances are displayed with their system instance number. If you were to install a new system it might be usefull to install all instances with different instance numbers so you and distinguish more easily between them.
Hope this helps,
Cheers,
Walter

How to find port number , when there will be different instance number ?

In case of portal url,
port number is 50000 for default instance number 00.
how to find port number , when there will be different instance number , instead of 00?
Thanks

Hi
You can find the port number by your instance number as follows:
There is a general format for the port number like you have mentioned.
For 00 instance the port number is 50000.
The general format for the port number goes like this:
5<instance_no>00
If your instance number is 01 then the port number would be 50100.
It depends on the installation type which you perform.
You can also change the instance number during the installation but normally you dont do this.
If you have many components or units installed on your system you may have more than one instance in that case it may go like this 00, 01, 02....accordingly port number will be 50000, 50100, 50200...resp.
Hope this solves your doubt.
If you need some more clarification please lemme know.
Regards
Sumit Jain
**Rewrd with points if useful.

How to change Instance Number of an existing 4.6C System ?

My customer has DEV and QAS systems running in separated boxes and having the same instance number of 00. Now I'm consolidating these two SIDs into a new box. So, I need to change the instance number of one of them.
I found note 127351 on how to do this but noticed that the note only applies up to release 4.0B. Not sure if it still is valid for 4.6C.
I'd appreciate your help on how to do this.
Thanks in advance.
Satid S.
IBM Thailand

Hi Satid,
if you want to move 2 systems of 2 boxes to 1 box, you have to copy at least one system anyway and therefore need to change the hostname of that system.
If you are doing this, this is a homogenious systemcopy which could be run with R3setup as described in the SAP documentation. I'm using an bit easier approach with more or less just savlib/rstlib - if you are interested, I could mail this to you.
With a homogenious systemcopy or my approach you have to "re-decide" for the instance number - so this is just no problem at all.
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Creation of Mfg Service contract from IB Instance number

Hi Team,
We have a requirement from client that we need to create a Mfg Service contract for a given IB Instance number. Can you please let me know, if we have any API for this?
I tried to create contract using Oks_Contracts_Pub.Create_Contract_Header API but this contract is not associated with Instance in IB.
Please help to provide any ideas on this. We are on 11.5.10 version.
Thanks/Suresh K

Solution: You need to associate Contract with Covered line with that serial number.

SAP Service named SAP SID _ Instance Number is missing in services.msc

Hi,
SAP Service named SAP<SID>_<Instance Number> is missing in services.msc
Example :
SID = DM0
Instance Number = 01
SAP Service Name = SAPDM0_01
Please help me to resolve the issue.
Thanks in Advance.
Warm Regards,
Sathya

SAPSTARTSRV.EXE
Values :
Operation Selected is "Install Service + Register COM Interface + Start Service"
SID = DM0
NR = 00 or 01
Startprofile = D:\usr\sap\DM0\SYS\profile\START_DVEBMGS01_sapserver
User = DOMAIN\SAPService<SID>
Password = ....
Now the SAP Service, SAP<SID>_<Instance Number> is created in services.msc.
Thanks www.sdn.sap.com
Edited by: Sathya Kala Veeraraj on May 6, 2010 12:12 AM

The difference of minor number and instance number

I study how to develop device drivers. I am beginner.
I'm confusing the differece of minor number and instance number
what is the exact difference of them???

Hi,
I guess a good example would be a disk. Each disk you have would be a different instance. To use a disk it is divided into slices, each of which has a different minor number.
Your device driver needs to map the minor number to the correct instance of the device. How you do this is completely up to you, so to start you could map them one to one.
Hope that helps.
Ralph
SUN DTS

LOAD BALANCE (CSS) and Portal Port Number based on Instance Number

Hi,
My doubt is about LOAD BALANCE (CSS) and Portal Port Number based on Instance Number.
I have to install 3 servers machines and 2 servers databases cluster. There will be a HIGH AVAILABILITY environment. There will be a MIGRATION and UPGRADE.
Today there are 2 servers machines in Windows NLB. Today my production Portal is 6 6.20.
Once, I did something for LABORATORY TEST. Migration (6 6.40) and Upgrade (7.0)in two other machines. But they were with Windows NLB. When I did the installation, for each server machine and during the instalation I had to give one Instance Number for each and in result there was a different Port Number for each.
But I accessed both machines throught a virtual url(dns) with a specific port number. And it works!
NOW, with a HARDWARE LOAD BALANCE _ CSS I don't know how to do.
A guy who works with it tell us that couldn't redirect one Port Number for different port numbers. He couldn't configure the CSS like this.
My question is: Is he write? And if he is, there is a way to give the same instance number for my 3 new Portal servers machines? Example: 5(02)00.
Could you understand?
I need help.
Regards,
cheers,
Nivia

Nivia,
I have used F5 for load balancing, I am sure you can do the same with CSS. Yes, you can configure a virtual IP on the load balancer with standard ports (80 or 443) and load balancing the traffic to multiple servers with different ports. You can have different ports for each instance.
-Regards
RK

Message Server Port and Instance Number

Hi All,
I need to create Technical System and Business System in SLD for my IDOC-XI-FILE Scenario. There i need to specify the Message Server port under Message Server and Instance Number in Central Application Server. Please let me know where i have to found these. Please help as soon as possible.
Thanks & Regards,
Nagarjuna.

Hi Nagarujna,
Instance Number : - just check the logon pad.. select your Ecc or R/3 system and click on chane item.... Usally it is 00.
Message server port : it is 3600 + instance no.
3600 + 00 = 3600
Sachin

BPM an Mapping: Get the workflow instance number?

Hi everybody,
wen need in some cases the message-ID that was generated in message-mapping.
But when I take this message-ID and try to find it via SXMB_MONI the message could'nt be found due to reasons I do not know.
So now I would like to capture the BPM instance number. Is this possible in message-mapping?
Thanks regards
Mario

I doubt you would be able to get the BPM instance no. However, I don't understand why u r facing problem with message ID.
Regards,
Prateek

*** Instance Number already in use. ***

Hi,
if I start my oracle collaboration suite services, I get the following message after "Starting the Monitor process.":
*** Instance Number already in use. ***
*** Please try a different Instance number. ***
Why?
And after this (ldapcheck):
Checking Oracle Internet Directory Processes ...
Process oidmon is Alive as PID 3928
Not Running ---- Process oidldapd
Not Running ---- Process oidrepld
opmnctl: opmn started
opmnctl: starting opmn managed processes...
opmnctl: starting opmn managed processes...
Request failure -- 0 of 1 processes started. < WHAT? WHY?
to be continued...:
### midtier.sh ###
ORACLE_HOME=/opt/oracle/mid
TNS_ADMIN=/opt/oracle/mid/network/admin
### midstart ###
#### opmnctl start: ####
opmnctl: starting opmn and all managed processes...
Request partial success -- 2 of 9 processes started. < WHAT? WHY?
And unistart-errors:
/opt/oracle/mid
#### unistart : ####
unistart: Oracle Calendar Server 9.0.4
unistart: Copyright (c) 1993, 2003, Oracle.
unistart: All rights reserved.
unistart:
unistart: unicheck working, please wait ...
unistart: Starting the Calendar Directory Access Server
unistart [error]: Error starting the Calendar Directory Access Server
unistart [error]: More details can be found in '/opt/oracle/mid/ocal/log/unistart.log'
unistart [error]: and in '/opt/oracle/mid/ocal/log/das.log'.
UM processes startup
starting smtp_in ...
oracle.mail.OESException: oracle.mail.ldap.ESDSException: [ESDS error code - 10041] Anderer Fehler. Weitere Informationen hierzu finden Sie in der Fehlermeldung
Unable to connect to Directory Server
oracle.ias.repository.schema.SchemaException: Unable to connect to Directory Server
Keine Prozesse definiert fuer host.domain.tld :um_system:smtp_in
and so on with nntp, imap, gc, list, pop, vs.
Help me!
Olli

Thanks!
But:
1. hm, ok, as user oracle and in the path /opt/oracle/infra/opmn/bin
I found it... ./opmnctl stopall
2. ps -efw | grep oracle | more
oracle 12633 1 0 14:08 pts/0 00:00:00 /opt/oracle/infra/bin/tnslsnr listener -inherit
oracle 12637 1 0 14:08 ? 00:00:00 ora_pmon_iasdb
oracle 12639 1 0 14:08 ? 00:00:00 ora_dbw0_iasdb
oracle 12641 1 0 14:08 ? 00:00:00 ora_lgwr_iasdb
oracle 12643 1 0 14:08 ? 00:00:00 ora_ckpt_iasdb
oracle 12645 1 0 14:08 ? 00:00:00 ora_smon_iasdb
oracle 12647 1 0 14:08 ? 00:00:00 ora_reco_iasdb
oracle 12649 1 0 14:08 ? 00:00:00 ora_s000_iasdb
oracle 12651 1 0 14:08 ? 00:00:00 ora_d000_iasdb
oracle 12653 1 0 14:08 ? 00:00:00 ora_d001_iasdb
oracle 12659 1 0 14:08 pts/0 00:00:00 ./oidmon connect=iasdb start
oracle 12662 1 0 14:08 pts/0 00:00:00 oracleiasdb (LOCAL=NO)
oracle 12936 1 0 14:10 pts/0 00:00:00 /opt/oracle/storage/bin/tnslsnr storage -inherit
oracle 12940 1 0 14:10 ? 00:00:00 ora_pmon_storage
oracle 12942 1 0 14:10 ? 00:00:00 ora_dbw0_storage
oracle 12944 1 0 14:10 ? 00:00:00 ora_lgwr_storage
oracle 12946 1 0 14:10 ? 00:00:00 ora_ckpt_storage
oracle 12948 1 0 14:10 ? 00:00:00 ora_smon_storage
oracle 12950 1 0 14:10 ? 00:00:00 ora_reco_storage
oracle 12952 1 0 14:10 ? 00:00:00 ora_cjq0_storage
oracle 12954 1 0 14:10 ? 00:00:01 ora_qmn0_storage
oracle 12956 1 0 14:10 ? 00:00:00 ora_s000_storage
oracle 12958 1 0 14:10 ? 00:00:00 ora_d000_storage
oracle 12970 1 0 14:10 ? 00:00:05 ora_j003_storage
oracle 12980 1 0 14:10 ? 00:00:00 /opt/oracle/mid/opmn/bin/opmn -ds
oracle 12982 12980 0 14:10 ? 00:00:00 /opt/oracle/mid/opmn/bin/opmn -ds
oracle 12984 12982 0 14:10 ? 00:00:00 /opt/oracle/mid/opmn/bin/opmn -ds
oracle 12985 12984 0 14:10 ? 00:00:00 /opt/oracle/mid/opmn/bin/opmn -ds
and many more ...
3. How????????????
4. ?
5. -

Substitute Function in Excel: Replace text with instance number in BO

Hi,
I have a column where data is merged from three other columns each text separated by "-". Ex: Services - Phoneline - New Customer.
What I wanted to do is to just get the last text which is "New Customer" separated. I used "Length(<columnValue>)-Length(Replace(<columnValue),"-",""))" to get the number of instances of "-" in the text as it varies from 1 to 3.
I use to do it in excel using substitute function where I have the facillity to use the character instance number. I don't know how to do this in Business objects.
Please help...
Thanks

DDann wrote:
=SUMIF('New Req to Capability Mapping'!$D$2:$D$148,A2,'New Req to Capability Mapping'!$I$2:$I$148)
Col A is a list of the capabilities and the formulas are in COL B of this sheet. [....] The problem that I am experiencing is that for some of the capabilities I am see correct count totals for some while others are not for instance, "Account
Management" shows correct while "Security Awareness Program" is not. I have copied the text for each of the capabilities from the main sheet into Col A to reduce keystroke errors. I have also copied those strings into some of the problematic
formulas instead of using the cell address to see if the results change.
Good troubleshooting techniques. Unless someone gets lucky with a wild guess, I suspect we cannot help without having the workbook to see the situation for ourselves.
You can upload an example Excel file (devoid of any private data) that demonstrates the problem to a file-sharing website.
Then post the "shared", "public" or "view-only" link (aka URL; http://...) in a response here.
The following is a list of some free file-sharing websites; or use your own.
Box.Net: http://www.box.net/files
Windows Live Skydrive: http://skydrive.live.com
MediaFire: http://www.mediafire.com
FileFactory: http://www.filefactory.com
FileSavr: http://www.filesavr.com
RapidShare: http://www.rapidshare.com
I suspect that the problem has to do with either a mismatch in spacing or the presence of non-breaking spaces (HTML &nbsp) or other non-printing characters, notwithstanding your efforts to eliminate that possibility with your copy-and-paste experiments.

Central instance number

hi all,
at the time of doing installation we are giving the number for central instance.
My doubt is that we can give any number (upto 100) or is there any restriction in the numbers for giving central instance number.
answers will be apprecited
regards
vijay

Hi Vijay,
Theoretically we can use from 00-97 but practically it depends on the Operating system like UNIX or windows. In HP-UX you cant use 75 as its being used by operating system. In windows you cant use 43,60 or 89 as its being used by MSCS ,iSCSI, windows terminal service respectively
Thanks
Prince Jose
PS: Please assign points if helpful

IBase component number changed

Good day!
After applying SP18 on Solution Manager I have encountered a problem: iBase component number for productive ERP-system has changed three times.
(first it was 50, then 250, then 268, now 691).
Right now the process for keeping up to date information about
satellite systems in Solution Manager is following:
1.All system data is stored at System Landscape Directory (SLD).
2.Once an hour it's automatically transfered to SMSY in Solution Manager via
scheduled task - RSGET_SMSY.
3.After that (or every time SMSY is saved) iBase is updated.
Main question is, why did existing iBase component (productive ERP was
always in list of iBase components) change its number?
How to prevent this from happening in the future?

Hi Tolulope,
Please check weather ibase is generated for the development system in IB52, Check the Note 1284794 - SMSY: IBase generation cannot be deactivated.
if Ibase is created for the development system , go to DSWP and the solution that u have maintained the satelite system and do the initial data transfer for Ibase(path would be edit->initial data transfer for Ibase)
hope it should resolve your issue
Regards,
Laxman

IBASE instance number

Similar Messages

Maybe you are looking for