Ibeacon emit /receive on IOS devices

Hi everyone,
Does someone know if IOS devices such as iPhone 4s and + can emit via iBeacon technolgy ?
I have found both answer during my search and not an understandable for me, answer from Apple pages.
Some say that iPhone can only receive data via iBeacon, emitted by fixed beacons as in shops
Some say that it can emit and receive data, i.e. from one iPhone to another.
They all seem to say that Android devices can only receive.
Many thanks in advance if someone has the answer and can direct me to web articles on the subject.
Thierry

iOS devices can both emit and receive iBeacon signals, although an iBeacon does not have to be an iOS device.
I don't know about Android.
Here is general watered-down consumer info from Apple:
http://support.apple.com/kb/HT6048
Here is developer framework info mentioning iBeacon:
https://developer.apple.com/library/ios/documentation/miscellaneous/conceptual/i phoneostechoverview/coreoslayer/coreoslayer.html
Apps such as these use this technology:
https://itunes.apple.com/us/app/ibeacon-maps/id719380896?mt=8
https://itunes.apple.com/us/app/locate-for-ibeacon/id738709014?mt=8

Similar Messages

  • Appointments emailed from iCloud calendar in Outlook are not received on IOS device using exchange calendar.

    I email tons of appointment invitations from my iCloud calendar in Outlook.  Appointments synch to IOS devices and are on icloud.com.  People receive invitations in Outlook and on IOS devices.  My husband runs IOS devices with exchange calendars.  He never receives the appointment invitations.  All of the appointment invitations are on his iCloud.com account.  Can he synch to both exchange and iCloud?  WIll this allow him to see the invitations I send that are hung up in iCloud?

    Could be a corrupt item, this usually fixes it if that is the case
    Backup device then in Outlook
    highlight calendar
    goto file import/export
    choose export to file
    choose Persoanl folder pst, next
    make sure calendar is highlighted and choose subfolders if you have them, next
    save to desktop with a name you can remember, Finish
    Click ok on screen popup
    Go to view, arange by events
    delete all entries.
    close outlook and any word files, open outlook back up after 15 seconds.
    Then
    goto file import/export
    import from another program or file, next
    choose Persoanl folder pst, next
    find the file and import
    Choose highlight calendar and Finish
    Change view back to what you want and try again.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • My messages are not going through or coming in from other iOS devices.  Having to send and receive in SMS.  What is up?

    My messages are not going through or coming in from other iOS devices.  Having to send and receive in SMS.  What is up?  Anyone else having these issues?

    There's an article that Apple has acknowledged this issue. They recommend turning off imessages, reset all settings and then reactivate imessages.
    If that doesn't work, you may just have to wait until they release an update, which should be pretty soon.

  • HT1420 I use two MacBook pro, two iPads and two iPhones. Upon connection and attempt to synchronize photos I receive a message that my authorization limit is exceeded. I read that iOS devices do not count against the authorization limit.

    I use two MacBook pro, two iPads and two iPhones. Upon connection and attempt to synchronize photos I receive a message that my authorization limit is exceeded. I read that iOS devices do not count against the authorization limit. One iPhone and one iPad show in the authorization list. iTunes wants to delete my purchased programs and books from the iPad to continue synchronization. What can I do?

    Ok, now I do wish I could edit....
    I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
    So, I kept playing, and playing some more...
    I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
    I didn't remove the Ethernet, Firewire or Airport Network devices.
    Now, I have done so. I REMOVED EVERYTHING
    No pairing, no network devices.
    Bluetooth was already turned off, and I rebooted.
    I turned off tethering and rebooted the iphone.
    I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
    I opened a web page, no go... d4mn, I was close...
    Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
    Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
    So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
    Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best).

  • IOS DEVICES receiving iCoud Possword failure Notifications

    I am submitting this issue for a relative who is unable to use her Apple ID because fails.  My cousin owns  two IOS DEVICES; IPad and iPhone    and is experiencing receiving "ICloud password failure" notifications on both devices.  I submitted her issue to the iCloud Forum and received no replies and I hope the iPad Forum can offer some type of recommendation to solve this issue.  Several weeks ago she changed her Apple ID password because of a possible Security breach and she believes the change was successful.  I recommended she attempt to to change her password again and re-input her information into her IOS devices. When attempting to make the password change, she received the Security Question she originally answered , but her answer this time failed.  Can the iPad Forum offer a resolution or a recommendation as my cousn's next step of action.

    You have to make sure that Port 5223  is open for your iOS devices
    If you support push notifications and want Apple mobile devices to receive push notifications over your Wi-Fi network, you also need to open port 5223 on your enterprise Wi-Fi network. Port 5223 is an outbound TCP port used by the Apple Push Notification
    Service (APNS). The mobile device initiates the connection. For details, see
    http://support.apple.com/kb/TS1629 .
    Technical Requirments for Lync Mobility
    http://technet.microsoft.com/en-us/library/hh690030.aspx
    - Belgian Unified Communications Community : http://www.pro-lync.be - MCM/MVP/MCT

  • I own several iOS devices, and for some reason, everyone get's my text messages on their phone. We turn iMessage on, and select send and receive only at our own respective devices. Why does iMessage automatically turn on?

    I own several iOS devices, and for some reason, everyone get's my text messages on their phone. We turn iMessage on, and select send and receive only at our own respective devices. Why does iMessage automatically turn on?

    Go to Settings > Messages > Send & Receive on each device and make sure only the phone number for that device is checked.

  • My iOS device says I still have 12.2 GB of free storage on my iCloud account, however I am receiving e-mail saying my iCloud storage is full. How can I solve this problem? Thanks

    My iOS device says I still have 12.2 GB of free storage on my iCloud account, however I am receiving e-mail saying my iCloud storage is full. How can I solve this problem? Thanks

    Did you get this fixed and how?

  • I purchased a song from iTunes radio through Apple TV.  The song does not show up on my iOS devices or my MacBook Pro?

    I tried out the new iTunes Radio last night through my Apple TV.  Even purchased a song.  Can't find the song through any of my iOS devices or my MacBook Pro music library.  What am I missing?  It said that the song would be on my devices.  Help?

    Hi Dreanmachine1,
    Thanks for visiting Apple Support Communities.
    When you purchase a song on your Apple TV, it is available on all of your devices. There are a few reasons why you may not see the song on your iOS devices or your MacBook Pro. They may not be set up to download purchases automatically, or you may not have been signed into the iTunes Store.
    I'd suggest trying to download the purchases on your other devices using the steps in this article:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    You may also want to check your automatic download settings, so you can receive future songs automatically. See this article for help:
    iTunes Store: How to enable Automatic Downloads
    http://support.apple.com/kb/HT4539
    All the best,
    Jeremy

  • Apple TV 2 choppy video playback when mirroring from Macbook Pro (Yosemite) and Macbook Air (Yosemite) but not iOS devices

    Video playback is choppy (cuts out every 30-45 seconds) when air playing from both my MacBook Air 1.3 GHz Intel Core i5 running Yosemite and my husbands new MacBook Pro, but runs perfectly when mirroring from any of our iOS devices (iPhone 6+, iPad mini 3, etc.) We have Apple TV 2. This problem just started a few weeks ago, was working fine around Christmas. The problem seems to have coincidentally started right after our son tried plugging in and setting up his Chromecast on our tv. I disconnected the Chromecast, but we still have the problem. All of our software if up to date and I've tried disconnecting blue tooth, we do not have a microwave and our wifi network has a very strong signal. We have an Airport Extreme base station. Is there a solution to our problem?

    Hi leahmturner,
    I see that you are experiencing an issue with choppiness while AirPlay Mirroring from your computers to your Apple TV. I have an article that contains some helpful troubleshooting steps for you regarding this issue:
    About AirPlay Mirroring in OS X - Apple Support
    http://support.apple.com/en-us/HT201343
    Optimizing image quality
    Resolution matching modes
    You can choose between two desktop resolution matching modes that let you select which display will have the best image. When AirPlay Mirroring is turned on, select an option under "Match Desktop Size To:" in the AirPlay Mirroring menu extra.
    Match Desktop Size To: Apple TV
    AirPlay Mirroring changes the desktop resolution to best match your Apple TV, resulting in a 16:9 image that fills the HDTV screen. This setting often produces the sharpest image on the HDTV. The aspect ratio and/or resolution of the built-in Mac display may change to accommodate the Apple TV.
    Match Desktop Size To: This Mac
    AirPlay Mirroring scales the contents of the desktop to fit on the Apple TV, leaving the resolution of your Mac's display unchanged. Use this setting for the sharpest image on your Mac's display. Depending on your Mac model, the resulting image may not fill the HDTV screen.
    Troubleshooting AirPlay Mirroring
    If you don't see mirroring options
    If your Mac and Apple TV are on the same network, but no AirPlay Mirroring menu appears, your Apple TV may be asleep. Simply press a button on your Apple TV remote to wake it up. After a few seconds, the AirPlay Mirroring menu extra appears. If you still don't see the options you expect, make sure your Apple TV has the current software update installed. Also make sure that you have the "Show mirroring options in the menu bar when available" option selected in the Displays pane of System Preferences.
    If the menu bar or Dock is cropped
    Some HDTVs have bezels that cover a small percentage of the screen. This can result in a slight cropping of a full-resolution HDTV image. Depending on the HDTV model, AirPlay Mirroring may automatically adjust the picture size to prevent cropping.  If you are using OS X Mountain Lion or later, and you see cropping of the menu bar or Dock when using AirPlay Mirroring, toggle the Overscan correction option in Displays preferences.
    Minimize video post-processing
    HDTVs often apply picture quality enhancements intended to improve the look of film and video sources. In some cases, these enhancements can lead to over-sharpening artifacts when displaying your Mac desktop. Some HDTV models have built-in settings to change or disable the enhancements for use with a computer (computer, presentation, or game modes). Otherwise, the controls for sharpness, detail enhancement and noise reduction can be used to optimize the appearance of the Mac desktop. Consult your HDTV’s manual for guidance on the appropriate settings for use with a computer.
    Firewall security settings
    If you use a firewall, make sure the following firewall security options have been set to allow AirPlay Mirroring to work:
    Choose System Preferences from the Apple menu ().
    Click Security & Privacy, then click Firewall.
    Click the lock icon to unlock it if it's locked, then type an administrator name and password.
    Click Firewall Options.
    Deselect (uncheck) the “Block all incoming connections” checkbox.
    Select (check) the “Automatically allow signed software to receive incoming connections” checkbox.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Messages on the Mac (10.8.4) no longer syncs with iMessages sent between iOS devices

    I've been running Messages on the Mac since the Beta, and I've always had messages sync to the Mac and all iOS devices. In the last week, the Mac no longer posts imessages... only messages sent from the Mac trigger the Messages app to start tracking the message thread.
    I've got my iphone number and three emails in both the Messages preferences (using my Apple ID) and on all of the iOS devices. So I should be receiving messages to four addresses (one phone number and three emails). I did get a new iPhone 5 on Wednesday, but the issue started prior to loading the new phone with my backup.

    Hi, Ralph. Thanks so much for taking the time to address my discussion. While your solution did not correct the problem, it did bring clarity that it's the Mac–not the iPhone or other iOS devices–that is the entity having trouble.
    While going through your solution steps on the iPhone, I decided that I should probably take the same actions on my iPad (Wi-Fi Only). When I turned to the iPad, I realized that both the iPad and the iPhone have remained in sync with all messages: only the Mac has not been posting some iMessages.
    So I did perform your solutions steps, but they did not have an effect on the Mac Messages. I then removed my Apple ID from Messages on the Mac, quit Messages, and Shut Down the Mac. After a few minutes, I started the Mac, launched Messages on the Mac, and activated an iMessage account using my Apple ID. No improvement on the Mac side was realized.
    I think I have the issue better isolated to... Messages on the Mac was not accepting iMessages sent to or received from my telephone number. I've always had my Messages preference set to Start Messages from my Phone number (and again on my iPad and iPhone Settings), so I'm not sure what changed.
    Once I triggered a new message on the Mac starting from my Phone number and being delivered to my Phone number, the Mac seems to have regained its knowledge of iMessages–originated from an iOS device using a phone number and being sent to a phone number–that should also be synced to Messages on the Mac. I'll keep an eye on it this week before closing this discussion.

  • I've update iOS devices to 8.0 and now need to update xCode, but keep getting "unknown error -50" leaving me with a non-working internet connection - the only fix seems to be reboot of both iMac and router - any ideas?

    Having updated all my iOS devices to iOS 8.0 I now need to update xCode to match. I've tried several times, and on each occasion have received an "unknown error -50" message after getting about 500Mb. After this my internet connection appears to be fully occupied, and the only fix appears to be a reboot of both the iMac (2.5GHx Core i5, 4Gb RAMm OS X 10.9.5) and the router (Netgear DG834 v5, firmware 1.6.01.34) At first I thought that the error had not stopped the download, but after waiting for 30 minutes the connection was still unresponsive, though traffic was indicated as passing through but the router status page, and no additional content had been added to the download. Anyone else having a similar problem and different ideas as to fixing it?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How do I download iLife on my MacBook Pro (for free) after purchasing a new iOS device

    Hello,
    I watched the most recent keynote address just like everybody else and was very happy to hear that Apple was going to provide the new iLife and iWork software for free with the purchase of a new Mac device or iOS device. So, I went and purchased a new iPhone 5S. Now how do I get my free copy of this software on my MacBook Pro (Mid-2010) running Mavericks?
    Any help would be appreciated.
    Thanks,
    Marcus

    You must be running Mavericks and have purchased the iLife 11 apps, either they came with the Mac or from a purchased iLIfe 11 disk, in order to upgrade to iPhoto 9.5 for free.
    The following came from this MacWorld article: What you need to know about Apple's free apps policy | Macworld
    If you own iLife '11 or iWork ’09 apps (or v1 iOS apps) and you got them from the Mac App Store or iOS App Store: You should be able to download the latest versions for free by going to the app page on the Mac or iOS App Store.
    If you own iLife '11 or iWork ’09 apps for the Mac but did not purchase them from the Mac App Store: You should be able to download the latest versions for free by going to the Mac App Store and tapping Update, though you may need to first visit the Purchases screen, where you might see a box called “You Have [number] Apps to Accept.” This ties apps you have on your computer to both your Apple ID and a hardware identifier on your computer, and it should allow you to download free updates to these programs from any computer associated with your Apple ID.
    Some users (including yours truly) are reporting issues where the Mac App Store doesn’t recognize their copies; when they click on an iLife or iWork app’s price, they receive the following alert: “[App] is already installed and was not purchased from the Mac App Store. Do you want to buy [app]?” Macworld spoke with an Apple spokesperson who noted that there’s currently an issue with some legacy customers, and the company is working on a fix. That fix appears to have been implemented; on Thursday, several users told Macworld that they were getting the Accept Apps prompt.
    If you don’t own iLife '11 or iWork ’09 apps (or v1 iOS apps), or own older Mac versions: On the iLife side, you’ll have to buy iMovie and iPhoto at full price ($15 or $5, depending on platform). GarageBand is free for everyone to download, though the app does offer in-app purchases. Apple’s iWork apps are each $20 for the Mac, $10 on the iPhone or iPad.
    OT

  • ASA 5510 Remote Access iOS devices issue

    I'm having a weird issue that just cropped up in the last week or so. Previously, ipads and iphones were working fine on our IPSec VPN, but now they don't work at all.
    The iOS device throws one of two errors:
    1. "Negotiation with the VPN server failed." (asks for user and pass first, then gives this error after about 30 seconds)
    2. "The VPN server did not repond." (might just be intermittnet 3G network I'm testing over)                  
    If the error is #1, the ASA says this:
    tacacs+ and aaa debug:
    user: testuser
    Tacacs packet sent
    Sending TACACS Start message. Session id: 11763, seq no:1
    Received TACACS packet. Session id:1263956303  seq no:2
    tacp_procpkt_authen: GETPASS
    mk_pkt - type: 0x1, session_id: 11763
    mkpkt_continue - response: ***
    Tacacs packet sent
    Sending TACACS Continue message. Session id: 11763, seq no:3
    Received TACACS packet. Session id:1263956303  seq no:4
    tacp_procpkt_authen: PASS
    TACACS Session finished. Session id: 11763, seq no: 3
    crypto isakmp debug (Negotiation with the VPN server failed.):
    Jun 11 15:09:57 [IKEv1]: IP = 174.232.18.200, IKE_DECODE RECEIVED Message (msgid=ad46fa43) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 80
    Jun 11 15:09:57 [IKEv1 DEBUG]: Group = MobileDevices, Username = testuser, IP = 174.232.18.200, processing hash payload
    Jun 11 15:09:57 [IKEv1 DEBUG]: Group = MobileDevices, Username = testuser, IP = 174.232.18.200, processing delete
    Jun 11 15:09:57 [IKEv1]: Group = MobileDevices, Username = testuser, IP = 174.232.18.200, Connection terminated for peer testuser.  Reason: Peer
    Terminate  Remote Proxy N/A, Local Proxy N/A
    Jun 11 15:09:57 [IKEv1 DEBUG]: Group = MobileDevices, Username = testuser, IP = 174.232.18.200, IKE SA AM:b19cbbe4 terminating:  flags 0x0941c801,
    refcnt 0, tuncnt 0
    Same error with a different debugging level and another tunnel group:
    Jun 12 10:16:50 [IKEv1]: Group = Test_Tunnel_Group, Username = testuser, IP = 174.252.107.180, User (testuser) authenticated.
    Jun 12 10:16:50 [IKEv1]: Group = Test_Tunnel_Group, Username = testuser, IP = 174.252.107.180, Assigned private IP address 10.1.50.175 to remote user
    Jun 12 10:16:50 [IKEv1]: Group = Test_Tunnel_Group, Username = testuser, IP = 174.252.107.180, Forcing iPhone to host mask. <--is this forcing the mask to 255.255.255.255 because the iphone requires that?
    If the error is #2, the ASA says this:
    Jun 11 15:13:18 [IKEv1]: IP = 174.232.18.200, Connection landed on tunnel_group MobileDevices
    I've changed a lot of settings, but I haven't gotten anywhere. I've tried different tunnel groups and connection profiles. This setup works fine on a Windows computer with the Cisco VPN Client (5.0.07). ASA is running 8.2(5), split tunnel, no pfs, group name and psk, tried with and without peer ID validation, NAT-T (udp 500, 4500).
    Any ideas? Thanks in advance.

    Solved.
    Static Nat is solution.
    I have created rule as follows:
    nat (inside,outside) source static 192.168.1.0_24  2.2.2.2 destination static 172.16.1.0_24 172.16.1.0_24 no-proxy-arp

  • Itunes could not connect to the ipad because an invalid response was received from the device

    Hello
    I just installed the maximus v extreme motherboard with a ocz vertex 4 ssd with windows 7 x64. Installation was fine and installing drivers went without a hitch. Re-installing the software i use went fine as well.
    However, when i went to use iTunes( v10.7) to sync my ipad i got an error message saying:
    "Itunes could not connect to the ipad because an invalid response was received from the device"
    I then connected my ipod nano to see if it will cause the same error, but it worked fine. So i tried an iphone and the same error I got for my ipad came up.
    I tried reinstalling the usb drivers, but the same error came up. I also updated BIOS to the latest version, but the error still came up. I also reinstalled itunes numerous times and still got the error. I reinstalled and updated all drivers as well. Again this did not fix the issue. I also tried to run itunes in vista compatability and xp compatability mode. Again this did not fix the issue.
    I have also followed all the steps apple recommends to do on their website with regards to this issue, again it did not fix the issue.
    It is a real pain as everything else works like a dream! Is there anything i can do to get itunes to work properly on my pc?
    Thank you for your help!
    System specs:
    asus rampage v extreme motherboard
    OCZ vertex 4 SSD
    8 Gb DDR3 RAM (1600 mHz)
    windows7 x64
    Intel i7 3.5Ghz 1155
    nvidia GTX295  (x2 running in Sli)

    I fixed this problem.  Believe the problem is iOS 7 incompatibility with older iTunes Versions on older MacOS systems or platforms.
    My iPad 2 would no longer sync with my old  PowerPC Mac mini running MacOS. My iPhone 3GS synced fine.  IPad2 updated to iOS 7 which doesn't run on my iPhone 3GS. Error message for iPad sync problem was "invalid response received from iPad" out of iTunes.  I then applied update iOS 7.1.2 to iPad and error message changed to indicate this version of iTunes not supported, use 11.1.
    iPad 2 used to sync prior to iOS 7 installation. 
    Research on Apple web site shows iOS 7 on iPhones and iPads does not support older MacOS and iTunes versions.
    Upgraded with new Mac mini and iTunes 11.1 and MacOS 10.9.2. (put this off as long as I could.  )
    all good now.

  • Cannot view photos in the stream on iPhone 6 but can with my other 4 iOS devices

    I just purchased an iPhone 6 and the setup  smooth but one thing..photo stream.  I can take pictures and they go in the stream and I can view from my other iOS devices but I cannot view photos taken with other devices on the iPhone 6. All use the same iCloud ID.

    Hi JinnaWinkas,
    Thanks for visiting Apple Support Communities.
    Try these steps first if the Photo Stream on one of your PCs is not updating:
    you can't connect to the Internet, iCloud Photos will not be able to send or receive updates to My Photo Stream. If necessary, troubleshoot your Internet connection on your PC, Mac, or iOS devices.
    Open the iCloud Control Panel and make sure that you're signed in to the same iCloud account that you're using on your other supported devices.
    In Windows 8.1, go to the Start screen, click the down arrow in the lower-left corner, then click the iCloud app.
    In Windows 8, go to the Start screen, and click the iCloud tile.
    In Windows 7, choose Start menu > All Programs > iCloud > iCloud.
    Make sure that iCloud Photos or Photo Stream is turned on in the iCloud Control Panel. Click the Options button and make sure that My Photo Stream is turned on.
    Close and reopen the iCloud Control Panel.
    Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
    You can find the article with these steps here:
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/TS3989
    Best Regards,
    Jeremy

Maybe you are looking for

  • How do I import collections and previous editing into a new copy of Lightroom 5?

    I've recently installed Lightroom 5 on a new computer.  I chose not to install my old Lightroom 3.6 on the new computer, but imported the catalog and photo folders from external drives into Lightroom.  My collections and editing did not appear to hav

  • PS CS4 crashing when brushes changed - OSX Lion

    Have just installed Photoshop CS4 on a brand new MacBook Pro supplied with Lion. PS keep crashing when brushes changed in brush selectore with following error report. Have installed Java runtime and deleted preferences file without any resolution. An

  • ReaderX, WinXP SP3, Protected Mode for Admins

    Hello, We are having an issue running Reader X on Windows XP SP3 ***IF*** the Windows user is a member of the Local Admin group, it will not open in protected mode. **IF** the Windows user is a member of the local user group, Reader will open in prot

  • My itunes keeps closing

    My itunes keeps closing, i have tryed uninstalling and reinstalling. its says itunes has encountered a problem and windows can not find a solution. Please can someone help thanks

  • Mobile Devices and HTML DB

    Are there any resources that describe how HTML DB applications/solutions are utilized by client browsers on Mobile Phones, PDAs and Handheld Devices?