IBM RSA 6.0.1.1 - interim fix 022 / Apache Tomahawk saveState problem

Is Tomahawk <t:saveState /> component working with IBM RSA and IBM JSF implementation. I can't get it worked. Did anyone?

Not sure about RAD7.. I do know that the internal WAS test envionment is WAS 6.x or something .. and that the JSF jars are supposed to be part of the APP server (as opposed to deploying with your app)
If I had to bet it probably not going to be 1.2 but thats just a guess. IBM has these JWL?? widgets I think they are throwing in RAD / RSA 7 so my guess is they won't be up to date no the lastest version of 1.2 since they probably coded these widgets a while ago not to mention they have to support a billion other integrated products .. portal..etc.etc.. so my guess is they have a hard time keeping up with the later versions (at lease from a "supported") standpoint.
Their company line for WSAD 5.1 (about why they were stuck on 1.0 was
something like "IBM does not have imminent plans to move to JSF 1.1 because the original implementation (shipped in WebSphere Studio 5.1.2) includes corrections to defects that are addressed in JSF 1.1. Adoption of JSF 1.1 is redundant to the code IBM has already delivered. Remember that IBM was a major code contributor to the JSF project and the corrections shipped by IBM in WebSphere Studio 5.1.2 were factored into JSF 1.1. Over the longer term as the JSF standard continues to evolve, IBM will adopt newer versions"

Similar Messages

I don't know of there is anyone than can fix this age old Apple problem. Does anyone know how to retrieve things under an old Apple ID when the email used for that account no longer exists? I am trying to update a number of apps that was bought under an

I don't know of there is anyone than can fix this age old Apple problem. Does anyone know how to retrieve apps under an old Apple ID when the email used for that account no longer exists & I can't remember the password? After speaking with Apple Acct. Security, I got the security Q right but my birthday was wrong! They wanted the serial number from my phone that was 3 iPhones ago! Seriously??!!
Any updated way to work around this? No Apple people can correct it.
Thanks,
Joe

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986)

Will apple next update to help fix the location following data problems will the ipod touch 2g be included ?

will apple next update to help fix the location following data problems will the ipod touch 2g be included ?

Chances are the 2g itouch will not be included in the update. Also no one yet knows if it will be fixed in the next firmware but apple has said they know of this bug.

[svn:fx-trunk] 10229: Fixes for some transform effects problems.

Revision: 10229
Author:   [email protected]
Date:     2009-09-14 08:43:43 -0700 (Mon, 14 Sep 2009)
Log Message:
Fixes for some transform effects problems.
- We were not animating the postLayout properties in some cases where we should have, effectively pinning the object in place. We now animate those properties whenever applyChangesPostLayout is true.
- A copy/paste error meant that we did not animate the scaleZ property in cases where we should have.
- A problem in the transform code means that using a null transform center is not the same as a transform center which uses the transformX/Y/Z properties of the target object. We now force the creation/use of a transform center in all cases to avoid that problem.
QE notes: This breaks about a dozen tests in the transform effects area, but I believe the new results are correct and the tests/bitmaps should be changed.
Doc notes: None
Bugs: sdk-23177
Reviewer: Hans
Tests run: checkintests, Mustella transform effects
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-23177
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/AnimateTransform.as

When is Apple going to fix Yosemite's internet connection problem

Is Apple going to fix Yosemite"s internet connection problem?

Nobody here knows any more than you do about what Apple is going to do. If you want help from other end users with your problem, you'll have to describe it in more detail.

My itunes radio rebuffers every 8 seconds - is there any fix or help for this problem. I am running the latest itunes on a new Mac with 4MB download speed.

My itunes radio rebuffers every 8 seconds - is there any fix or help for this problem. I am running the latest itunes on a new Mac with 4MB download speed.

You need to update your Mac OS to at least 10.5.8.
Itunes 10+ requires Mac OS 10.5.8+

Fix for Airport Wireless Connection Problem stating Self-Assigned IP and not wanting to connect in Lion OSX.

Fix for Airport Wireless Connection Problem stating Self-Assigned IP and not wanting to connect in Lion OSX.
Bought my girlfriend the newest Macbook Pro 13" and began experiencing problems with my wifi the moment we got home. Her Macbook would not connect to our home Wi-Fi while my old Macbook Late 2008 running Snow Leopard connected without a problem. Airport would say that it had a Self-Assigned IP address (168.x.x.x). Did not realize it was a Lion problem until after using her Macbook Pro and becoming jealous of the new OSX, I upgraded. Soon after I was unable to go online. Luckily I had my iPad 2 and I began to scoure the net for help. Ran into allot of suggestions but it was not until I tried the following all together was I able to share the good new, from my Macbook. Hope this works:
First go to Preferences > Network and click on the cog next to the + and - on the sidebar and click Set Service Order
     - Move Wi-Fi to the top and click ok.
     - Set location to Automatic
     - Click Apply
     - Click Advanced
     - Click the "-" on the selected Wi-Fi router you wish to connect to
     - Click Apply
     - Click Lock to Prevent Further Changes
Go to your Mac's harddrive, (Macintosh)
     - Go to Library > Preferences > SystemConfiguration >
     - Delete "com.apple.airport.preferences.plist" file
Turn off your computer
     - push and hold Option+Command+R+P
     - turn on computer
     - when the grey screen turns on you will hear the OS X "ON" sound (for lack of a proper term) and it will momentarily restart.
     - you will once again hear the "ON" sound, let go of all keys.
     - this resets your PRAM
Go to Preferences > Network > Advanced > + sign
     - click Choose a Network
     - Select your network and enter password
Viola!!! I tried this on my Macbook Late 2008 and my girlfriends new Macbook Pro 2010

     No you are clearly mistaken. The Self-Assigned IP address problem exists on many Macbook Pro models, including the current model, which I mentioned as being the original computer with the problem. While my 2008 Macbook is older it was working perfectly on Snow Leopard and didn't suffer issues until switching to Lion. So clearly the problem exists on the operating system and not so much the hardware.
     I called Apple Support and they had no fix for the problem and told me that this would hopefully be addressed in a subsequent update. It wasn't until I came accross the answer after trying many different methods that I got both of the Macbooks to connect to my router. Otherwise I wouldn't or could not have been surfing the internet for the last 4 months.
Cheers.

Has anyone fixed the following droid razr problems:

Has anyone fixed the following droid razr problems: 1. the phone won't let me answer calls, if the answering screen shows up it takes 5 rings; 2.It takes about 4 attempts to end a call, half the time I have to wait for them to hang up; 3. GPS will stop and freeze; 4. phone freezes doing simple tasks; 5. It won't flip through easily; 6. slow (deleted texts and photos and still slow); 7.deleted apps still show on phone; 8. battery life is about 3 hours if used constantly; 9. some people cannot call me; 10. typed text takes a very long time to appear on the phone.

Try this:
Wipe Cache Partition - DROID RAZR / RAZR MAXX by MOTOROLA
Performing a wipe cache partition will remove any temporary files that may be causing an issue with the device. All personal files and settings will not be affected by this option.
Power the device off.
Press the Power button then select Power off.
If the device doesn't respond to input, press and hold the Volume Up / Down then press and hold Power button. When the device screen goes blank, release the Power button while continuing to hold Volume Up / Down then proceed with step 3.
Press and hold the Volume Up / Down then press the Power button.
When presented with the Boot Mode Selection Menu, release all buttons.
Press Volume Down to select Recovery then press Volume Up.
From the Droid triage screen:
Press and hold Volume down.
Press and release Volume up.
Release Volume down.
Select wipe cache partition then press the Power button.
Use Volume keys to navigate options.
Select reboot system now then press the Power button.
Use Volume keys to navigate options.

How to fix sometimes out of limit problem of SCE8000 and how client can out of its limit

how to fix sometimes out of limit problem of SCE8000 and how client can out of its limit?
how to debug this?

bump

[svn] 1313: Fix for the use namespace problems we've been having with ASC ( I hope).

Revision: 1313
Author: [email protected]
Date: 2008-04-20 09:41:41 -0700 (Sun, 20 Apr 2008)
Log Message:
Fix for the use namespace problems we've been having with ASC (I hope). The problem was that the use directive was being defined after we had called finish package. The UseDirectiveNode has a pkgdef ptr, and does different things depending if that ptr is null or not. It should not be null when the UseDirective is inside the package - but since we were generating the UseDirectiveNode after we had called finishPackage the UseDirectiveNode didn't have it's pkgdef ptr set, and so things went awry as the package didn't get set up with all the correct open namespaces. I haven't tested this in authoring/flex but I am pretty sure that this will fix all the problems we're seeing.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/Parser.java

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

How to fix the stuck in headphone problem

How to fix the stuck in headphone problem?

First try a reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)
If not try this:
Settings > General > Reset > Reset All Settings

How to fix OS X Yosemite installation Problem? When the unit is rebooting the apple logo shows up then it is replaced by a cancel symbol? please help what to do?

How to fix OS X Yosemite installation Problem?
When the unit is rebooting the apple logo shows up then it is replaced by a cancel symbol?
Please help what to do?

Do you mean a circle with a slash through it?
If so, the drive doesn’t have or can’t find the necessary startup files.
Boot into Recovery and reinstall.

How to Fix the iPhone 4S Wifi Problems After 8.2

How to Fix the iPhone 4S Wifi Problems After 8 2 its grayed out

I suggest you describe the problem in more detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received. Telling us you've tried ""all the methods mentioned in the forums" does not help.

How do I fix Oracle Apache Trace and Track vulnerability?

Hi All,
After a vulnerability scan of our Oracle 10g (10.1.2.0.2) OID & Portal environments and Oracle 6i (9.0.2.2) Forms & Reports machines, I found a vulnerability with Trace & Track (http://www.kb.cert.org/vuls/id/867593) on these machines. The proposed fix for Apache is as follows:
Apache HTTP Server
To disable HTTP TRACE support, set TraceEnable Off.
Alternatively, use the Apache mod_rewrite module to deny HTTP TRACE requests or to permit only the methods needed to meet site requirements and policy. TRACE requests can be disabled with the following mod_rewrite syntax:
RewriteEngine On
RewriteCond %{REQUEST_METHOD} ^TRACE
RewriteRule .* - [F]
However, this did not resolve the vulnerability. I realize that Oracle has modified Apache and so a non-standard approach may be required. Does anyone know of a fix for either version of Oracle (10g or 6i)?
Thanks in advance!
Sunil

You need to put this in the Virtual host tag for it to work.

Joe Schorr - When can we expect a fix to the numerous keyword problems?

Joe, when can we expect a fix for the numerous keyword problems? Is this a priority?
There are so many problems that I’ll be very surprised if you can resolve them all on the first attempt. I doubt you have a complete list but I feel safe in saying they’ve all been mentioned here in one form or another. You would be doing yourself and the customers a service if you took the unprecedented step of providing your list so that it can be reviewed for accuracy. I’m finding new problems... or at least I think I am. I hate to waste your time reporting problems others have already reported or worse yet, problems I’ve reported — as I’ve lost track there are so many.
Please let us know what is going on with this. You’ve made progress on the performance issues (though I think I speak for everyone with a PPC system that it’s still not what it should be – and I have a G5 Quad w/7 GB RAM and Quadro FX 4500 card. Aperture should be smokin’ but it’s not...)
I look forward to hearing from you....

I have a 500 GB hard drive; that's how I've avoided the issue, to date. But you consider a 2000 shot bat mitzvah a small shoot, so I have know problem acknowledging you shoot a lot more than I do.
The key point about Aperture, to date, is that it doesn't add ANY data to original RAW files, period. Everything it appears to do -- everything is just a set of modifications to the master. This applies to sharpening, this applies to shadows and highlights, this applies to cropping... and it applies to metadata.
As for archival, etc., ... if you're archiving outside of Aperture... why not just use multiple Aperture libraries? It's a bit inconvenient (to the extent that it takes 15 seconds to change the setting and re-launch), but it gets around the problem. I mean, if you're archiving external to Aperture in original RAW format, you're not only "losing" the metadata... you're losing every single change you've made to the file. Truly, no editing functionality of anything would you be using in this scenario.

IBM RSA 6.0.1.1 - interim fix 022 / Apache Tomahawk saveState problem

Similar Messages

Maybe you are looking for