IBM SPSS 20 and Maverick: Any compatibility problems?

Hello,
I was wondering whether anybody has noticed any problems with SPSS 20 after the upgrading to Maverick?!
Cheers,
Mario

Yes Oppiefromil is correct. Installing Mavericks aiutomatically deletes Java, which SPSS needs to work properly. So, after updating to Mavericks, you'll need to download and reinstall the latest version of Java, which you can download here: <https://www.java.com/en/download/mac_download.jsp?locale=en>. This site has the most recent version of Java for Mac. For some reason Apple is still using Java version 6, while Oracle's Java website has had Java version 7 for a long while now.
Download Java from Oracle's website, then install. After install, you'll need to quit your browser and then reopen it. That'll complete the Java install, and Java will reappear in your Systems Preferences again.
(You can confirm all this by checking System Prefs before you upgrade to Mavericks. Your Java icon appears in the bottom row. After upgrading to Maverocks, check System Prefs again, and the Java icon is no longer there, as Mavericks deletes it as a part of its install process. Follow the above link to reinstall Java, then after the installation is complete, check System Prefs again and the Java icon is back in the bottom row).
Once Java is installed SPSS 21 should run just fine. I just tested it after reinstallling Java and it opens up and works perfectly. It should, therefore, also work fine with SPSS v22. Not sure if it works with SPSS v20.
Hope that helps!
todd
Message was edited by: Todd Nach

Similar Messages

HT4623 Is there any compatibility problem between iPod 4 and Bose docks?

Is there any compatibility problem beteween ipod touch 4 and Bose docks?

What does Bose say? Make sure you look for a 4G with iOS 6.
I do not recall being aproblem with iOS 6 but with 7 I think yes.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset the dock
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Extender 1.4 to use with 70D and EF 70-200 f/4 IS. Any compatibility problems?

I am planning to get the Extender 1.4 to use with my EOS 70D and the EF 70-200mm f/4 IS. Are there any compatibility problems with this combination?
Solved!
Go to Solution.

ebiggs1 wrote:
"... they will work perfectly together."
Perfectly may be a stretch but, yes, they will work as well as the combo can. Anytime you add something like a tele exrender you have to give up something. In photography you give to get. There is no free lunch. Fortunately you are starting out with a pretty good lens and can afford to lose an f-stop and some IQ.
Let me pose a slightly different question. Suppose you already have (as many of us do) a 70-200mm f/2.8L IS II. Suppose you add the 1.4 tele-extender. The combination would result, I believe, in a 98-280mm f/4, a potentially useful lens that doesn't appear in Canon's lineup. So given the cost of the TE and the image quality of the combination, is buying the TE a smart move?
Note that buying the TE does not compromise the 70-200 in any way, since it's still as good as it ever was without the TE. The combination, for the price of the TE, stands or falls on its own.
Bob
Boston, Massachusetts USA

I have a friend from Montreal Canada who is in U.S.A. for 2 months. Her old iPad has to be replaced. Is there any compatibility problems with the iPad made for U.S.A. and those one made for Canada?

I have a friend from Montreal, Canada who is in U.S.A. for 3 months. Her old iPad is not working very well and she thinks about buying a new iPad. Is there any compatibility problem between iPad sold in the States and those one sold in Canada?

http://www.apple.com/ipad/specs/
http://www.apple.com/ipad/LTE/

With Firefox 5.0.1 and Firefox 6 beta there are display problems apparently due to Java and some Javascript compatibility problems -- there were links to solutions, but they are no longer active. What to do?

The box and button lines are not displayed or are mis-sized, if they appear at all; problem varies with the website and page style.
The threads I found in discussions mentioned a couple pages that are no longer active/cannot be opened -- so these solutions don't work.
When starting version 5x and 6beta I get information certain add-ons are STILL incompatible with these versions?
Are there any work-arounds or patches?

I am having this problem too. Just like WinOnBatch the problem started for me around firefox 5.0.1.
I have not been able to get rid of this problem. I have tried creating a new profile, restarting firefox in safe mode. disabling extensions 1 by 1. When I built this computer I did a clean install of firefox 5.0.1, and 2 weeks later with no extensions the problems came back. At that point I had the Java and flash plugins only.
When firefox 6 was released I did another fresh install (uninstalled firefox, went through my hard disc and deleted any reference to firefox and mozilla. Did the same in the registry, then run a registry cleaner and restarted the computer) before I installed firefox 6 and the problem was happening in less than a week. The I said to hell with it and re-created my entire profile from scratch and installed all my old extensions (updated them off course). 2 weeks ago it got really sever and I couldn't see any buttons on the chome interface and all web pages I visited were displaying really messed up. The only way i can describe it is kinda like greentech70 screenshots but on every inch of the application window. Like a really bad screen tearing effect.
The only thing that seem to help is when I downgraded to firefox 3.6.18. That fixed it but like greentech70 I have security and privacy concerns, so upgraded to firefox 6 again as the issue went away for 1 day, then came back but not as severe. since then I have been downgrading to firefox 3.6.18 re-installing java and flash, then upgrading back to firefox 6. It keeps the problem minimised but im still plagued by it. I also wonder if its a problem with firefox's 6 graphical engine.

No bootable device -- insert boot disk and press any key - problem

Hi,
I'm running an early-2008 MacBook (13-inch) that has previously had Windows Vista and Windows 7 installed to it through Bootcamp over the years.
A few weeks ago I did a fresh reinstall of OS X Lion (10.7.5) and decided to reinstall Windows 7 as well. I deleted all the partitions and started afresh. However, upon trying to reinstall Windows 7 I've become a wee bit stuck.
Bootcamp works fine at first - it lets me partition the HDD without any issues (the partition is MS-DOS - FAT32), but when it reboots it gives me a message 'No bootable device -- insert boot disk and press any key' against a black screen. I've never seen this message before and it won't let me continue with the installation. I'm able to get back into OS X by pressing the option key upon reboot.
Any idea what I'm doing wrong? As I said I've used Bootcamp several times in the past on this machine without any problems. The only difference between then and now is that my Superdrive no longer works so I'm using an external DVD drive. However, the error happens regardless of whether it's plugged in.
Cheers,
Matt

jeffjefftyjeff wrote:
The only difference between then and now is that my Superdrive no longer works so I'm using an external DVD drive. However, the error happens regardless of whether it's plugged in.
For Macs with built-in Optical drives, it must be functional for a Windows installation/installer to work. You will also need a USB2 flash drive.
On such Macs, the BCA sets the boot device to be the non-functional Optical drive, which is why you see a No boot device message.

How to repair "No bootable device insert disk and press any key" problem?

I was browsing sites using Google Chrome when all of a sudden, my laptop completely turned off. I turned the power back on only to find the error message "Intel UNDI, PXE-2.1 (build 082)" appear in white letters, followed by a bunch of other error messages, ending with, "No bootable device insert disk and press any key". Whenever I try restarting my laptop, the same error messages show up.
I've been reading about Toshiba laptops, to try to remedy this issue, and I've learned that as of 2007, Toshiba discontinued the recovery disks that had always accompanied the laptops, and instead, allow you to totally restore your computer without the help of a disk. (The model of my laptop is Satellite L300D - 01P).
Now, apparently to restore a Toshiba laptop, you're supposed to press the '0' key while also pressing the power button, but when I do this, there is a beeping noise (which is apparently supposed to happen), but the error messages (ending with "No bootable device insert disk and press any key") still show up. Other than the affirmative beeping noise, no changes occur.
Anyone had this problem or have any suggestions of how to fix it?
Thanks so much.

>...and I've learned that as of 2007, Toshiba discontinued the recovery disks that had always accompanied the laptops, and instead, allow you to totally restore your computer without the help of a disk. (The model of my laptop is Satellite L300D - 01P).
Have you also learned that you SHOULD create recovery DVD using preinstalled Toshiba recovery disc creator tool? When something goes wrong with HDD you can use this disc for operating system installation. This is clearly described in Users manuals document.
Back to your problem:
I don't know for sure but Im afraid you have some problem with HDD controller or HDD itself.
Is HDD recognized in BIOS settings (F2 at start up)?

No bootable device -- insert a boot disk and press any key problem

My laptop model is L505 s59903.
It is suddenly turn to black screen and not work,When I restart it , the screen shows "No bootable device -- insert a boot disk and press any key".
I try to recovery the system, but it can not find the hard disk. In CMOS ,the hard disk shows "none".
I have important data in my laptop. Is it hard disk Failure? How can I recovery my data in the hard disk?
I try to replace other hard disk to the laptop , it is work. Then I made the failure hard disk as portable hard disk to other laptop ,it has normal sound ,but still can not be found.
What`s problem is it?
Can I recovery my data from hard disk ?

It sounds to me like that hard drive has indeed failed. Please contact support at (800) 457-7777.
- Peter

Help with "No bootable Device -- Insert boot disk and press any key" problem

Alright, I am on an Early 2011 17inch macbook pro. I have removed the superdrive to install a secondary disk drive for mass storage, then replaced the original one with an SSD blah blah blah. I do everything from the books, run bootcamp, make my USB windows 7 bootable in Bootcamp, go through everything and allocate 65gb towards windows. I have tried 4 different USB sticks and 3 different ISOs. Every time I try it, I get the same "No bootable device -- insert boot disk and press any key". I then have to hold down the power button, then restart, hold down option/alt key, and boot regularly into mac. I also read that holding option/alt whilst starting the macbook pro will show the windows USB stick, well it never appears. I dont know what I need to do, what I am doing wrong, but nothing is working. I guess the last thing I have to try is buying a superdrive and burning ISO to disc then try that. But I dont want to go out and spend more money. Other people have gotten it to work just fine from USB, I dont know what I must do or what I am doing wrong...
Open to suggestions and in desperate need of help. Anything is appreciated.
Thanks!

Don't bump
get a new usb2 only flash drive and try the solution posted by kunu here and report back
https://discussions.apple.com/thread/5105056?tstart=0
How to install Bootcamp on a 2009 Macbook Pro that does not have a disc drive

Premiere CS6 and CC: any compatibility issues working back and forth between both versions?

Hello,
What are the compatibility issues with Premiere CS6 and CC versions? Can the user go back and forth? I run a computer lab at a college and we will be upgrading to CC but many students will still be using the older CS6 version of Premiere until we update all the computers.... Will students run into problems?
Thanks,
dmichael

My concern is going back and forth between the versions... I read somewhere there are compatibility issues with Premiere....Can the user working in CC go back to premiere CS6? and vice versa?
Thanks,
dmichael

How can a I solve and GPIB/VISA compatibility problem?

My Labview (version 5.1 on a Macintosh) application talks to a variety of instruments over GPIB. In one mode it communicates with both 1) a LakeShore 340 temperature controler (LS340) using VISA-based drivers and 2) a Linear Research LR-700 AC resistance bridge using low-level GPIB functions. My application can query these instruments a couple of times per second, usually without trouble. However, periodically (about once an hour) the GPIB Read will cease to work with the LR700 or any of the other instruments on the same bus, returning error 6 (I/O operation aborted). GPIB Write still works fine. Querying the LS340 when the system is in this state produces the VISA error Hex 0xBFFF003C (Insufficient system reso
urces to perform necssary memory allocation). Querying the LS340 a second time is successful, and thereafter GPIB Reads are also successful.
I think somehow the GPIB and VISA protocols are interfering with each other. (Although the data dependency requires that the VISA Write/Read be complete before the GPIB Write/Read begins, I am not opening/closing the VISA session with every iteration. The VISA session is opened on the first iteration and stored in a shift register.) However, the maddening infrequency of this problem makes it very difficult to troubleshoot. Any suggestions?

Hi Chris,
One suggestion;
Write two seperate test routines that each use only one method or the other.
Test the H*&#$ out of each to attempt to determine if the issue is associated with the high level or the the low.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Is Firefox 6 compatible with Webroot NOW right from the start or is there any compatibility problems?

I want to know if Firefox6 is compatible with Webroot this time right from the start. It was not when Firefox5.0 came out and I had a lot of issues. I just want to know what to expect and if Firefox is working on it IF it is a problem or do I need to do anything with Webroot to make the two compatible?

Only if the Comcast "deal" with Norton is directing you to the download or updating you to the newest Norton version. The Norton toolbar that gets installed into Firefox was made compatible with Firefox 6 on the day that Firefox 6 was released.
According to this post on the Comcast forum
*http://forums.comcast.com/t5/Security-and-Anti-Virus/Posting-questions-pertaining-to-the-COMCAST-Norton-Security/m-p/769035
if you click on "link" near the bottom in the paragraph beginning "''In order to honor his request, please follow this '''''link''''' to the Other Norton Products board...''", you will be taken to the following forum at Norton where you can ask your question:
*http://community.norton.com/t5/Other-Norton-Products/bd-p/other
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Any compatibility problems with CS & Elements on same PC?

I have Photoshop CS5 but I want to install Elements as well (for a different user) on the same computer. Before doing so I'd like to know if there will be any complications installing Elements while already having a CS?

There are no compatibility issues that I am readily aware of.

CCS Password Manager and Fingerprint Manager compatibility problems

Hello All, I have a Thinkpad E550, bought by the end of last year, and it came with Fingerprint Manager 4.5. I also wanted to use a Password Manager, so I downloaded the CSS version 8.3. Both are working, but they can't see each other. Anyone can help me with that? Best Regards,

Hello mate,
Open Client Security Solution. on the top left corner you can see a button Advanced click on it and then Reset security settings.
See how it goes.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Any known issues with Flash player 9 and windows 2003 compatibility?

Hi guys..
Is there any known compatibility problem with running flash
applications
on Windows 2003 Server?
My application runs just so well with Windows XP
yet it throws a 2015 bitmap error
when it is being run on the windows 2003 server.
(Not quite often but often enough. the only difference is the
operating
system)
Is there any known issue about this?
Or could there be any compatibility problem with flash player
and
windows 2003?
Any hints would be deeply appreciated...
Thank you...

Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

IBM SPSS 20 and Maverick: Any compatibility problems?

Similar Messages

Maybe you are looking for