IBM T120 monitor is not displaying smoothly

I don't really know where to go with his post, but I have an issue with my IBM T120 monitor.
Despite everything that's static (desktop, photos,..) looks good, but as soon as something is moving (cursor, videos, games) you can notice little jumps and skips in the motion.
But, is this a specific issue or failure or can this be solved?
PS: I've alreadt replaced the "generic pnp driver" with the ibm4945.inf, but it didn't help much.
I've also tried 2 PC's and it's definately monitor-related. 
Any ideas?
T42p 2373-Q1G (PM765, 2GB, 250 GB HDD, 15" UXGA(1600x1200), 128MB ATI FireGL T2)
T60p 8741-C4G (T7600 2.33GHz, 3GB, 320GB 7k2 rpm, 15.4" 1680x1050, 256MB ATI FireGL V5250)
R50p 1833-BU4PM1.7GHz, 2GB RAM, 60GB 7200rpm HDD, 15 UXGA(1600x1200) TFT LCD, 128MB ATI FireGL T2

it is probably to do with the fact that the screen has a 16 ms response, as compared to most other monitors with 8 ms or 5 ms, this used to happen in an old Dell 20 inch LCD screen we had in the lab. The pixel response time is just too slow. 
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • Monitor is not displaying any output

    Hi all,
    I have sun ultra 25 workstation with solaris 10 OS with SUN XVR-300 graphics card. my problem is that monitor is not displaying any output however monitor is fine with another workstation.
    when I powered on workstation, front panel shows green light.but monitor is not showing any output. however VGA cable and monitor is OK.
    I am in trouble PLZ help me ASAP.
    T&R
    gaurav

    I have also display problem, i use ibm desktop, more quite days the colour of monitor goes red. then i put some piece of paper between display jack & cpu body, then colour is ok, but when when i inserted new VGA card in mother board, when machine reboot it shows good colour of windows logos and ten the monitor display blank, i remove the VGA card, ram, cell, processor, all the cables & then restart but again no display, when i remove vga card, the monitor display no cable also blink light of monitor goes green but when i insert the wire the blink light goes yellow & one more there is no light in keyboard, when i inserted the keyboard slightly light blinks then it goes off, whereas the cpu starts smoothly.

  • External Monitor will not display full view MS apps.

    I have a HDMI monitor that was previously working fine.  The other day I went to use Word and Excel and the applications would only appear in the lower toolbar.  When I would select them they would not enlarge.  They remained in a thumbnail view.  My email and Internet work as expected.  Any ideas what's causing this?

    Hello @Bjenkins,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your external monitor will not display full view Microsoft applications on your system, and that certain functions will not work on your desktop. How long ago did your applications work properly? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Welogic 9.2 jdbc connection pool monitoring section not displaying server

    Welogic 9.2 managed jdbc connection pool monitoring section not displaying server name. Can you please let me know how can i achive this

    Hi,
    It happens if the Connectivity is Lost b/w DataBase & WLS Server...In that case in the WLS AdminConsole---DataSource---Monitoring Tab you wont see even the Testing Page with valid datasource to test it.
    So please make sure that the N/W connectivity proper....One more thing you can try:
    <h3><font color=red>Test-1</font></h3>
    You can use *“weblogic.Admin”* utility to Enable and Disable the Pool (DataSource) Just to Confirm whether the dataSource is actually active or not::
    Step1). run *"setWLSEnv.sh"* first in the same Shell prompt....then do the following:
    Step2). To suspend:
    java weblogic.Admin -url t3://localhost:7001 -username weblogic -password weblogic SUSPEND_POOL YourDataSourceName
    Step3). To re-enable:
    java weblogic.Admin -url t3://localhost:7001 -username weblogic -password weblogic RESUME_POOL YourDataSourceName
    To test whether you are getting any Exception or Error while doing this....If yes u are getting any Error or exception then It means there May be some Database connectivity issue...
    <h3><font color=red>Test-2</font></h3>
    Please use the following Utility to Test the Database connectivity from your WLS Server box:
    <font color=maroon>
    java -classpath /opt/app/bea/weblogic92mp2/weblogic92/server/lib/weblogic.jar -Dbea.home=/opt/app/bea/weblogic92mp2   utils.dbping ORACLE_THIN DbUserName DBPassword somethingDbUrl.Something.net:1521:dbInstance
    </font>
    Syntax:
    java   -classpath /opt/app/bea/weblogic92mp2/weblogic92/server/lib/weblogic.jar   -Dbea.home=/opt/app/bea/weblogic92mp2   utils.dbping   ORACLE_THIN   <DBUserName>   <DBPassword>   <DBURL>
    The above utilty will test the DB Connectivity ...you need to run it from your WLS server Box...
    <h3><font color=red>Another Simple Alternative of Test-2</font></h3>
    http://jaysensharma.wordpress.com/2010/03/23/testing-datasource-status-using-wlst/
    Thanks
    Jay SenSharma
    http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

  • Functioning Monitor will not display with Mac Mini

    I'm trying to get an IBM E74 CRT monitor working with an early 2009 Mac Mini. I have it connected with Apple's mini-DVI to VGA adapater. The Mac "sees" the monitor since with screen sharing I can see the Display System Preference when the monitor is attached. It shows the monitor as an IBM E74 and allows what appear to be appropriate choices as far as resolution and refresh rate are concerned. I tried many combinations of resolution and refresh rate with no difference in behavior.
    The monitor always acts like no signal is detected (built it message on monitor display). This monitor works fine with a B&W G3 and a late 2007 MacBook Pro. Any ideas why the Mac Mini is not driving the monitor? Have tried all combinations cycling power on the monitor, connecting / disconnecting while the Mac Mini is power up. Have had the monitor connected and powered on when booting the Mac Mini. For whatever reason the monitor does not seem to work with the Mac Mini, but works fine with other computers.
    The monitor despite its' age has pretty low time on it and is quite serviceable. Are there quirks with the VGA interface that we may be running into? I would like to get this combo working together if at all possible.

    I would say the VGA interface did evolve somewhat over that time period. In particular, the thing that may have changed that could be the underlying cause of the problem is sync termination impedance has trended upwards. It's not unusual to find older monitors with low impedance on sync. Some even had 75 ohm impedance, which required a line driver for sync the same as for video.
    It could be the IBM monitor has fairly low termination impedance and the mini is unable to provide sufficient output on the sync lines to drive TTL levels, whereas the MBP is doing better. You could check this with a simple ohm meter with the IBM monitor turned off. Ideally, for the mini, you would want to see a high impedance reading on H and V sync, like close to 2k ohms. If it's 500 ohms or less, then the mini may not be able to drive sync properly.
    On an old monitor like that, it is likely to have old fashioned components with axial leads rather than surface mount components. If you are handy with a soldering iron, you could find the offending resistors and bring the monitor up to a more modern, high impedance standard of 1.8k to 2.2k.

  • G4 12" mini DVI to VGA external monitor does not display

    I have hooked up the mini adapter cable and hooked up the VGA cable to a Dell P780, which the apple recognized. The monitor acts like it is going to come on, but then appears to go into sleep mode... The G4 is functioning as if the monitor is working.
    I hooked my PC to the monitor, and it works fine.
    I have tried two different monitors.
    I have reset the PRAM and NVRAM...
    Before I set it on fire, HELP.

    Are you using the mini DVI to DVI followed by a DVI to VGA adapter? That may not work if the mini DVI to DVI adapter does not pass analog video. If that is the case, you need the mini DVI to VGA adapter:
    <http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/2.RSLID?mco= 17927D0B&nplm=M9320G%2FA>

  • I'm trying to play an .mp4 video, but it does not display smoothly; image is jumpy.  The sound is fine, but the image starts and stops.  When I play the same file in WMV, displays just fine.

    Any suggestions on what I can try to clear this up?  Videos that I have downloaded through iTunes work just fine.  I don't know how to troubleshoot this file to see what is causing the issue.

    bertjones00 wrote:
    It reads other DVD's just fine.  I've tried playing commercial DVD's and homemade movies and they all work just fine.  I'm also able to create and read data discs with no problem.   I'm only having trouble playing this one particular DVD movie.   I'm able to play the movie in my PS3 with no problem and can play it in a regular HDMI DVD player.   I'm not sure if my computer doesn't recognize the encoding for the movie or if I need to download another type of software to play the movie.  Someone suggested that i try using PowerDVD to see if it could play the movie. 
    Ok then tell me this what is that DVD your having problem watching then? And what Region Code are you from like Euro is Region 2 and so on??? Could be the Region problem on the DVD doesn't match your drive Region as well?
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Monitor not displaying

    I have a HP Pavilion Media Center m8530f Desktop PC
    And my monitor was not displaying anything when I would turn it on so I opened up my PC and cleaned my CMOS then it actually displayed but it froze than it beeped like this *beep,beep,beep* one after another I turned it on one after another and it was displaying but it would either freeze or the monitor would go to sleep please help me I don't know what to do

    Hey KidKo0l, 
    I'm sorry you're having this issue with your monitor. I want to try to narrow the issue down a little further to either the monitor or the computer itself. Would you happen to have another monitor you could connect to your computer? You could also try attaching this monitor to another computer, even a laptop. Use the same cable if possible to rule out the cable as an issue too. If you have another cable you can try, use the second cable with the same monitor and computer as you experienced the issue with originally. Let me know what you find out from those tests

  • Fonts Do Not Display Correctly in Safari and Firefox

    Certain fonts do not display smoothly in Safari and Firefox. They appear to have little pieces of the letters missing. I'm sure others have experienced this problem before but I could not find how to fix this. On the Apple Discussions the fonts look fine... on Google for example, they look messed up. I do not know specifically which font(s) are displayed weird but it happens frequently. This happens in Safari and Firefox on my MacPro and MacBookPro. Is there a setting to fix this?
    Thanks,
    -flash

    Hello Flash, welcome to Apple discussions; )
    Look for Helvetica Fractions and Times Phonetic Fonts, if you have them,
    they can be the usual suspects.
    Check the Text encoding in both Safari & FF, under the "View" menu.
    In System preferences-> Personal (top section) in Appearance tab->
    on the last portion of the panel Font smoothing Style: set that to Automatic
    If those don't help, see this users tip excellent article Kurt Lang's ~ Font Management in Mac OS X
    Look into this application to find any corrupt font[s]Font Finagler
    Good luck, let us know how you fare.
    Eme'~{)
    edited by: Eme

  • Photoshop window does not display unless connected to external monitor

    I use a MBP connected it to an Apple Cinema Display used as an external monitor (not a dual display) when in my studio.
    When I use Adobe Photoshop CS 5 without the monitor the image window does not display on the MBP. If I plug the external monitor in, the window is displayed correctly on the MBP. Photoshop is opening and "displaying" the image window offscreen. Nothing gets it back onscreen, except plugging in the external monitor.
    I often use Photoshop away from my studio so this is a big problem. PShop is essentially unusable unless connected to an external monitor.
    Is this a known issue?
    Any workarounds?
    Any ideas?
    There is a previous discussion on this topic from January 2012, but it remains open and unanswered. Hoping there are some new ideas. Thanks for the help.

    The MacOS still thinks the second display is available and valid -- so Photoshop puts the documents on the last used display and the OS doesn't give any errors.
    Once the OS notices the change in display configuration, Photoshop should go back to the main display and force images and dialogs back to the main display.
    Applications rely on the OS for the display configuration, and sometimes the OS gets confused or holds onto outdated configurations a bit too long...

  • HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

    i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

    <http://support.apple.com/kb/HT5891>
    You can use USB for the Apple trackpad.
    <http://www.mobeetechnology.com/the-power-bar.html>

  • Source monitor and program monitor boxes will not display video in full only half

    I have adobe premiere pro cs6 and source monitor and program monitor boxes will not display video in full only half.  So the top half of both monitors are black and the bottom half is where the video displays.  But you can see that the video is missing the top part.  Like people's heads are cut off and can only see body.  How can i fix this so premiere pro cs6 will use the full monitors boxes to display my video?

    This is a known issue with a recent Windows update.
    The Fix (post 3):
    http://forums.adobe.com/message/5494175#5494175
    The Status Update (posts 46 / 52):
    http://forums.adobe.com/message/5555797#5555797

  • How can I reduce the display width of Firefox: I have my monitor in portriat mode, and the right side of the screen does not display.

    How can I reduce the size of the Firefox monitor display?
    I use my monitor in portrait mode, and the right side of the Firefox window is not displayed.

    Try using this extension. <br />
    https://addons.mozilla.org/en-US/firefox/addon/textarea-cache/

  • Lync 2013, text does not display in chat box. Windows 7 pc with dual monitors.

    Has anyone experienced an issue with Lync 2013 where when someone sends a chat the text doesn't display in the chat box. Or on occasion when initiating a chat, the text typed in doesn't display? The person experiencing this
    behavior has dual monitors and often times when she is working on a document - then goes to Lync and initiates a chat and types, the words do not display in the chat box. Her graphics drivers are current, (8.15.10.2869). At one point she was able to drag the
    chat box over to the monitor on the left and then the text displayed. Since then she has received a brand new laptop, windows 7 and the Lync behavior continues but now her dragging the chat box to other monitor no longer resolve text display issue. Ideas?

    Hi,
    Did the issue happen if only use single monitor?
    Please update to the latest version for Lync client 2013 and then test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • SolMan 7.1 Setup Monitoring - Custom Template is not display to Assign

    Hi All,
    SAP Solution Manager Configuration: Technical Monitoring - System Monitoring
    While creating custom template, i am facing issue, Please check it out below screens,
    After done, all setup, the custom template should display to apply and active.But it is not displaying
    This is the error msg below,
    Please help me out
    Regards
    Jay

    Hello Jagadish,
    thanks for your support.
    I went with Visual Admin tool to node SID - Server - Services - SLD Data Supplier.
    I saw some information - how can I check here?
    Afterwards I went to node SID - Server - Services - JCo RFC Provider and saw informations about client, user password. How can I check these informations? I stopped the SAPSLDAPI_SID RFC listener and started again. This worked without problems.
    I closed visual administrator and tried to login again via http://hostname:50000/sld. After cklick on button "Administration" there is no reaction - I get a blank site with no information on it.
    When I start configuration again through SOLMAN_ADMIN system hangs now in step 107 " SLD Server Configuration".
    Regards,
    Julia
    Edited by: Julia Bayrhammer on Oct 26, 2011 9:04 AM

Maybe you are looking for