IBM T23 and Apple Cinema Displays??

I have just purchased an Apple 23" Cinema Display for my 4 computers. I have a DVI switcher as well. I have 2 Desktop PCs, a PowerMac G5 and a T23 laptop (for work). My cinema display works great on the 3 other computers because they all support DVI. I have the port replicator for my T23 and thought it would support DVI based on the connector on the back. Problem is, it doesn't. (Found this out after reading alot online).
To make a long story longer, I cannot use remote desktop on my T23 because I use a VPN to connect to work all day and that negates RDP from one of my other computers.
I have tried a passive VGA to DVI adapter, but the Cinema Display will not see the signal. I am sure it is not powerful enough, or in the right clocking speed...or that it is not digital.
I was wondering if anyone else with a T23 has had any success with this type scenario. I am trying to not have to buy a $299 powered VGA to DVI adapter.
Any info would greatly be appreciated!!!
Thanks,
Doug
PowerMac G5,2 PCs and a crappy IBM T23 work latop Mac OS X (10.4.5) 23" cinema display
PowerMac G5, 2 PCs and a crappy IBM T23 work laptop Mac OS X (10.4.5) 23" cinema display

If you have a 8th inch to RCA(the three red, white, and yellow prongs) adapter. Then yes.
Other than that, apple sells a cable that you can plug into your iPod that will allow you to plug the iPod in to a TV(or anything with RCA in).
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/71102/wo/JE7Vm5p o7aCU3BVcsnSSUu9ZZMv/2.0.0.19.1.0.8.9.29.1.0.9.1.1.0.1#rev
I think that is what you are looking for.
Just joking. I didnt see that you wanted to use it with the cinema display thing.
I dont have that, so I really dont know. Sorry. It was worth the try.

Similar Messages

New Mac Mini and Apple Cinema Display

I have just upgraded my Mac (G5 PowerMac) to a new Mac Mini. I am still using my Apple Cinema display - but I cannot not play all the purchased movies that I have on iTunes now...????

Greg,
Are these movies HD? If they are, you might be having a problem with HDCP which is copy protection that won't let you view movies if all of your equipment is not HDCP compliant, which probably is your Cinema display. I also have a late 2012 Mac mini with an older Apple 20" Cinema display and cannot watch HD itunes movies. You will have to watch in standard definition. Of course you might have a different problem, but your question seemed similar with my situation. What is strange is that you were able to watch from your G5 Powermac. Maybe the power PC chip allowed viewing as opposed to intel chips, which I think intel created HDCP. Somebody on these boards probably has better answers then me ;-)
Rob

2008 Mac Pro and Apple Cinema Display 27"

Is there some sort of adapter that would allow me to plug the new Apple Cinema Display 27" with a 2008 Mac Pro? Or what change would I have to make to be able to work this out?

Adrian - did you end up getting an adapter and using it? I purchased the Atlona DVI to Mini DisplayPort Converter (AT-DP200) to connect my 2008 MacbookPro (with GeForce 8600M GT) to the new 27 in. Cinema display, and though it works, it looks a bit fuzzy in terms of resolution. Having read the response here about making sure it is a DUAL link converter, I was going to try to return it for the AT-DP400.
Then I read another thread on here that seemed to indicate that the AT-DP400 would not work at all with the 2008 Macbook Pro.
http://discussions.apple.com/thread.jspa?threadID=2585380&tstart=0
So now I'm confused. Just wondering what your experience is, if you ended up with getting the display and converter.

ATI Radeon 9800 Pro and Apple Cinema Display compatibility

I'd like to buy an Apple Cinema Display for my 5-year-old Power Mac G5 with an ATI Radeon 9800 Pro, but I'm having trouble understanding what I can and can't hook up to my system.
I was thinking of getting a 30" display, but the Apple Store says I need a Dual-Link DVI, which I don't think my graphics card supports, but the Store also says I need an ATI Radeon 9650 or better, which I imagine the 9800 Pro is.
I've looked at the ATI site for data on the graphics card, but their online manual shows a completely different set of connections on the card. They show VGA and S-Video out ports that mine doesn't have.
Does my ATI Radeon 9800 Pro have dual-link? If so, can I use the 30" display? If not, can I still use the 30" display?
If I can't use the 30" display, are there any compatibility problems with the 23" Apple Cinema Display?

The 9800 is faster than the 9650, but it doesn't have a dual-link DVI port.
Make sure you were looking at the Mac section of ATI's site. PC and Mac versions of the same card may have different port configurations.
AGP cards with dual-link DVI, starting with the fastest:
ATI Radeon X800 XT 256MB (ADC, dual-link DVI) (Some reports of problems with Leopard)
<http://www.welovemacs.com/0831xeghr.html>
NVIDIA GeForce 6800 Ultra 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613332.html>
NVIDIA GeForce 6800 GT 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613441.html>
ATI Radeon 9650 XT (Single-link, dual-link DVI)
<http://www.mac-pro.com/ATI-Radeon-9650-256MB-for-G5-661-3593?sc=2&category=42>
ATI Radeon 9600 Pro PC & MAC Edition RoHS 256MB AGP (Single-link, dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170809>
A 23" will work with any G5 card.

Leopard, Vista and Apple Cinema Display

I've searched the discussion forum for problem with my Apple Cinema Display, but most of the threads don't seem to fit exactly my question, which is:
*Is there a driver for 23" Apple Cinema Display for Vista?*
I have a brand new MBP (15", just 2 weeks old). I used Boot Camp (v.2, as part of Leopard) to install Vista.
Threads in the discussion forum seem to be more related to 30" display and v.1.4 of Boot Camp.
Thanks in advance.

Thank you Stefan. Well, it fixed the problem, but only partly:
I can get a picture in the 23" Apple Cinema Display, but after re-start (in Vista), it disappears. I need to go to Display Settings in Vista control panel to reset the monitor. The every time I try, it gives me different options (e.g. resolution, main/secondary monitor, refresh rate). Sometimes I can get the picture back, and sometimes I can't.
It's unbelievable that Apple doesn't even support its own hardware in Leopard!

New Mac Pro and Apple Cinema Display

Warning, for those of you upgrading to the new Mac Pro and you plan on using your old Cinema Display, you will not get the maximum resolution out of the display. In fact, you only get 1650 x 800--which of course is way under utilizing install resources and on top of that not a great picture. Even using recommended set up (mini display to DVI adaptor) does not help. You need a Thunderbolt Display for best video performance. Unless someone out there knows a way to do this--be prepared also to buy a new display.

Turbostar, it is the Apple 30 inch cinema display. Yes it works but the max resolution is 1650 X 800 which while acceptable does not get me 2560 x 1600 which my D500 GBUs would deliver. The new Pro is optimized for a Thunderbolt display, I am using the correct connection protocols as recommended by Apple on their web page for this system. There is a specific note in Apple support noted that Cinema displays will only provide xxxx resolution on the new Mac Pro's. Corsair.

Can't get microphone to work on google hangout. Apple cinema display

Hi: I am trying to use Google Hangout. On my macbook air, it works seamlessly. however, I want to use it on my mac mini and apple cinema display. The video/ camera works fine (I can see them and they can see me), the chat functionality works fine, output audio works fine (I can hear them) but they can't hear me!
I read all of the things I could on how to play with the setting but couldn't get the microphone on the cinema display to work.
Can someone help?
thanks

I had the same problem and did following adjustment and it started working:
Applications->Utilities->Audio MIDI Setup->Display Port-> Move the slider labeled "1" to right.

How can I run a 27" Apple Cinema Display and another monitor from my MacBook Pro?

Hi everyone,
I recently purchased a brand new 15" MacBook Pro to replace my old one. I was told when ordering it that I would be able to hook up two external monitors to it using the Matrox DualHead2Go hardware. So, I also bought a 27" Cinema Display (non-Thunderbolt since it wouldn't work with the DH2Go). However, when I contacted Matrox they said their products don't support screens as large as the 27" ACD.
Bummer!
So, my question is: does anyone know how I can hookup a 27" Apple Cinema Display at 2560x1440 and a Acer 22" monitor at 1685x1050 (or, anything less really) to my new MacBook Pro?
I've looked around and haven't been able to find a good answer.
Thanks for your help!

Will something like this work? A USB to VGA adapter? Can I use this at the same time that I have a Cinema Display plugged into the Mini-DVI port and will they both work at the same time? Anyone know?
http://www.amazon.com/StarTech-Monitor-External-Adapter-USB2VGAE2/dp/B002FJQXXC/ ref=sr_1_2?s=electronics&ie=UTF8&qid=1329870330&sr=1-2

Is it possible to connect both a Wacom 24in. Cintinq AND a 30 in. Apple Cinema Display to any of the current line of iMacs?

I currently have a Wacom 24HD Cintiq and a 30 in. Apple Cinema Display hooked up to an old '06 Mac Pro. I'd like to purchase a new iMac to replace the Pro. Is it possible to attach the Cintiq and Cinema Display to it?

Hello, it depends what kind of inputs those Monitors have, but if I see them correctly...
30" needs this...
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter
And the Wacom this...
http://www.newegg.com/Product/Product.aspx?Item=N82E16812191224
A notable peculiarity of Thunderbolt is that it uses exactly the same connector as Mini Display Port, and that's not all. The Thunderbolt connector also carries Mini Display Port video signals. That means you can plug a Mini Display Port video cable/adapter in to a Thunderbolt connector and your monitor will work.
If you plan to do other things with your Thunderbolt connector and don't want it wasted on a monitor, you can also choose an HDMI --> DVI adapter, which for your purposes will be functionally equivalent.
You can even use both at the same time.
- Anonymous
http://x704.net/bbs/viewtopic.php?f=13&t=6134&p=75115&hilit=thunderbolt#p75115
Even the 21.5" can support...
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2)
Details:
*This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
http://www.everymac.com/systems/apple/imac/specs/imac-core-i5-2.7-21-inch-alumin um-late-2012-specs.html

On/off Button and brightness buttons don't work in the Apple Cinema Display

I write you because I bought a new apple cinema display 20" a month ago and I have problems with the on and off button and the brightness buttons. Thew work sometimes. I think that te problem is windows XP but I am not sure. My graphics card is a ATI RADEON X800 GT Gecube 256 Mb DDR2.
Would yo mind telling me how can repair that? If I need something to repair o it is better to buy the new windows to avoid that problem.
Windows XP Pro ATI Radeon X800GT Gecube 256 Mb DDR2

Thank you very much. I didn't know this driver.
But the problem was when I was installing this driver, Windows said that it's imcompatible with windows XP.Is this normal? o I need to download a special edition for windows xp.

Wi-fi not working with Apple Cinema Display and Bluetooth-peripheral

Hello everyone.
I have a MacBook Pro (Retina, 13-inch, Late 2013), with OS X Yosemite 10.10.1. My problem is that when I use my macbook in closed-clamshell mode, the wi-fi connection becomes very slow and it regularly drops.
My external display is a Apple Cinema Display, 22-inch, model M8149. My mouse is the Apple Magic Mouse and my keyboard is the Apple Wireless Keyboard.
Thanks in advance for helping me.

Good day Brett,
I followed the suggested steps and for Wireless Diagnostics is all ok, but my connectivity problems are not solved.
I have made two report of the analysis. The first in "normal" mode is downloadable here. The second in closed-clamshell mode is downloadable here.
Could you tell me what is going on?
Thank you a lot

Apple Aluminum Keyboard and 23" cinema Display and MacBook Pro??

Hello there
I have just purchased an Apple Aluminum Keyboard and have and MacBook Pro with and 23" cinema display, and if i try to connect the keyboard to my cinema display via USB the keyboard don't work.
i have an Apple mighty mouse that works fine wen connected to the USB port on the display...
why is it not working...

have you tried a different USB port on the ACD? Maybe the one you used was defective? I run a 7-port bus off one of the USB ports for all my hardware. OTOH, I do use bluetooth mouse and keyboard!

23" Apple Cinema Display and accurate color?

I use a dual 2.3GHz Power Mac G5 along with a 23" Apple Cinema Display fro graphic design work. I used to use a Pantone Color calibration device when I was using third-party monitors with my Macs. Now that I have the Cinema Display, I haven't bothered to calibrate this wonderful monitor. I had heard that using Apple's displays with their own computers would display the most accurate color possible without calibration. I haven't changed the color settings in my Adobe products, and I'm not seeing any significant issues with my color outputs. Any advice on this subject is appreciated.

If the display uses the Apple Display Connector (ADC)
<http://upload.wikimedia.org/wikipedia/commons/thumb/0/09/AppleDisplayConnector.j pg/800px-AppleDisplayConnector.jpg>
you will need a DVI to ADC adapter.
<http://www.welovemacs.com/mb571zla.html>
They are also available on eBay.
<http://www.ebay.com/itm/Apple-DVI-to-ADC-adapter-A1006-for-Apple-LCD-monitors-Mi nt-Condition-/251073546040?pt=US_Video_Cables_Adapters&hash=item3a75264738#ht_5 0 0wt_1089>

HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

HT2810 apple cinema display sometimes needs to be unplugged and plugged back in multiple times to turn on any ideas for a fix?

apple cinema display will not allays start
i need to plug and unplug multiple times for ti to start.
any thoughts ideas would be helpful thanks

Okay, Mr. Easthills, you have an imac, but yet you mention apple cinema display....Hmmm, curious. you could try zapping the PRAM, hold down command (apple?), Option+P+R keys while rebooting mac. Hold down for 3 chimes, then let go and boot normally. I have this problem too, and I have a 20" widescreen apple cinema display(DVI connector--did I just date myself or what?),anyways, it's behaving itself now okay, but it tended to go dark right in the middle of whatever I was doing, and only unplugging the power cord to the display, and replugging in it would fix it for a while. sometimes it would happen again, and again the same solution. As to why it happens now with Yosemite, I don't know . This dear old monitor has lasted me about 8 years and it's still going just fine.. not state of the art anymore, though...
oh well, good luck to you
John B

IBM T23 and Apple Cinema Displays??

Similar Messages

Maybe you are looking for