IBM T30 XP USB error with Zen Micro. Does not recognize dev
I've tried everything I can think of on this board and others. Zen Micro, IBM T30 laptop, 2 usb ports on back, Windows XP. Downloaded latest everything I can find. USB does not recognize device. Error report shows "USB Root Hub (2 ports) ---> Unknown Device"
Any help appreciated. Thanks!
Tried one last thing, just for grins...
Put the IBM into it's docking station, which has another USB on the dock (low speed, though), and voila! It worked! Go figure what's different but since it was working, I took that opportunity to blow in the new firmware, and also upgraded to ZenMicroP4S_PCFW_LB_2__02 to get away from drivers all together (and to use Napster2go, my ultimate goal through all of this!) Syncing with MP0 worked great. Even an explorer view with folders and such, so all is well.
Since everything seems to be working, I'll stick with it for now!
Can I now delete Zen Micro Media Explorer from my system? (it doesn't seem to recognize the device anyway)
Thanks!
Similar Messages
-
I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. There's only a few things that could be my passcode, but because it disables for an hour, it is time consuming trying to figure it out. What do I do? I do not care about having to erase everything since it's new and there's nothing on it, but it was never synced with iTunes.
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
Error in login: Adobe does not recognize you as an authorized user of this web site.
I try login LWS but I return to me next error "
Adobe does not recognize you as an authorized user of this web site. Please contact Adobe for assistance." Can you help me?Hi FERCEP,
Please contact our chat support: http://helpx.adobe.com/in/contact.html.
Regards,
Romit Sinha -
Zen Micro does not accurately show length of
For most of my mp3's, the Zen Micro doesn't show the correct length of the mp3. For example, I have one mp3 that is like 20 minutes long, but for some reason it only shows a little over 4 minutes (4:06 for example).
Once it goes past the 4 minutes, it keeps playing, but the length won't increase...so if I were to fast fwd or rewind, it does it as of the 4:06 mark.
Other mp3's will be six minutes long and it only shows it as 20 seconds.
Has anyone else experienced this?That sounds like an MP3 format problem. Try re-ripping the MP3 with a better encoder. It's probably something wrong with the way the MP3 got tagged.
-
CUA: SCUG - Transfer Users errors with Output Device does not exist
Greetings,
I'm currently setting up CUA on our ECC 6.0 boxes and ran into an issue when I run SCUG and try to transfer the users. We're in the process of upgrading to ECC. The target systems are upgraded copies of our current 4.7 target systems.
Currently we have CUA connecting to our DEV,TEST, PreProd, and Prod Systems.
The output devices only reside on the target systems. There are no output devices on our production CUA box.
I'm trying to setup the ECC CUA box and modeling all the settings to our current environment. Once I set the CUA setting, including the RFC's and ALE connections I ran scug and ran into the issue.
I only get the error where the Default Output Device is populated. Users with no Default Output transferred without any issues. I looked up notes in OSS and can't seem to find any on this subject.
Side note: If I remove the output device it transfers without error. Obviously this is not a solutions, I was merely testing out the scenario.
Any help would be greatly appreciatedHi Alex,
there is just a little comment in SAP note #399917 (point 4).
As from my knowledge, the SCUM settings are not considered during SCUG. So setting
'output device' to local will not be a solution.
The standard way is to transport the ouput device information to your CUA-master system before taking over the users. (create transport in SPAD).
I have also another workaround for you gurus, but this will need to modify the standard coding for the time of taking over your users. Using this modification, only a warning message will appear and unknown printers will not be taken into CUA-master system.
Pls test this proposal carefully (coding is rather old....), this is just a suggestion !
Include LSUUCF01
FORM DEFAULTS_CHECK
Spool: Ausgabegerät
IF NOT DEFAULTSX-SPLD IS INITIAL AND
NOT USER_DEFAULTS-SPLD IS INITIAL.
SELECT SINGLE * FROM TSP03 WHERE PADEST = USER_DEFAULTS-SPLD.
IF SY-SUBRC <> 0.
PAR1 = USER_DEFAULTS-SPLD.
CALL FUNCTION 'BALW_BAPIRETURN_GET2'
EXPORTING
TYPE = 'W' "'E' "Warning instead of error
CL = '01'
NUMBER = 29
PAR1 = PAR1
IMPORTING
RETURN = ERRORTABLE
EXCEPTIONS
OTHERS = 1.
APPEND ERRORTABLE.
ENDIF.
ENDIF.
I strongly recommend to undo this modification after you have finished SCUG.
Good luck, b.rgds, Bernhard -
After installing Lion on my mini, I no longer get a "recognition sound" when I plug in a usb device. Is this normal?
I am not sure any Mac every had a sound for plugging/unplugging USB devices.
You may be right. It's only on Windows that the sound is created and heard.
I know that since Tiger on this MBP, when I plug in my external scanner, I never heard anything.
And plugging in my Blu-Ray recorder also does not make any sounds.
I cannot speak for anything but my Mac laptops, however. Desktop Macs might make a sound. -
Problem with Codec - QT7 does not recognize it
I'm trying to play a video with the basic version of QT 7.0.4 (didn't go to PRO yet) and the movie does not play.
I installed the codec's and still doesn't work.
The movie info was:
DX50, 528 x 304, Millions
MPEG Layer 3, Stereo, 48.000 kHz
And I had in the folder HD/Library/Quicktime:
DivX 6 Decoder.component
DivX 6 Encoder.component
AppleIntermediateCodec.component
In another try the movie info was:
XVID, 544 x 304, Millions
MPEG Layer 3, Stereo, 44.100 kHz
And I had in the folder HD/Library/Quicktime:
XviD_Codec v0.5.1.component
AppleIntermediateCodec.component
I tried all combinations of codec's (including 3ivx) and did not work.
Does the basic version accept 3rd Party codecs?
Any ideas?
Thanks,
J.RicardoHello JC,
The reason the movie will not play is because that's how Apple grabs you by the yang and twists. QT will not play AVI files until you purchase QT Pro, but it gets better. When you do purchase it, it will only work for the life of the lastest version of QT. As soon as a newer version comes out say QT 8, the QT Pro you now have for QT 7 will no longer work. That's why I'll never get QT Pro.
JerBear :-}) -
Things were going well. Mail was working fine and then the following error message appears out of nowhere. I had not changed any settings. From that point on all efforts to send mail failed, and the error message appeared even thought I used the password to log back in after I quit. Now, an hour after the problem started it takes my password (on the second try after the error message appears) once and sends a test message. Then, one minute later it gives the error message again and refuses to send anything. Why is mail so inconsistent? What can I do in the future to address the problem?
Error message reads "The SMTP server "xxxxx" rejected the password for user "xxx" Please re-enter your password or cancel.
When mail does work again. Should I click the remember this password in keychain or am I just asking for more trouble?
I'm writing this using my IMac computer in a different room. The error also occurs on my powerbook running my new MacBook Pro 12 inch.
Fed up Mac user.I"m no expert but this used to happen to me all the time (stop downloading, asking for my password, nothing downloading, walking away- 24 hours or more later, all is fine, only to later start all over again)
Well, i gave up for a long time and stopped using that account with mac mail and only accessed it online..recently went and changed the pop3 to only pop and now it works beautifully and seamlessly. Don't ask me why or how, but it does so thought I'd share. -
I had to buy a new printer when I got my Imac and I chose the Brother multifunction inkjet MFCJ470DW. It worked fine when my Mavericks version was 10.9.1, but after the automatic update to 10.9.2 the computer no longer recognizes the brother, or says it isn't connected, and when I deleted it from printer preferences and attempted to re-enter it as default printer, I cannot even type anything into the list of printers when I press the + sign to add. What am I doing wrong? Can someone please tell me even how to add text into the printer preferences list?
I had some of the same issues your having, deleted the printer from Printer and Scanner in System Preference.
What I ended up doing was connecting the printer with a USB cable like it was a new set up, down loaded the drivers from Apple, still did not seem to work, but did a coupel of restarts and the printer was found then I completed the set up. -
Nokia N8 with Nokia Belle does not recognize heads...
My headset (WH-701) is no longer recognized by my nokia N8 after I had updated to nokia belle. I first have to put my headset into the 3,5 mm AV connector before being recognized, and even then the headset may stop working after a few minutes. Once the headphone is working I still cannot make use of the (music)buttons on the headset (louder, softer, next, previous, etc.) Please can someone help with this problem? There must be a solution for this? I am using the headphones every day.
I know that already started on several topics, but Nokia has still not responded to this problem!
Thanks in advance for your help hi there mate,
if you are having problems with your phone, you can try checking via the phone itself or via Nokia Suite, if there are any firmware updates available, and to please update to the latest version offered. If there are no updates, try re-installing your current firmware, and if that doesn't work, then Restoring to factory settings. Failing that, perform a three-finger hard reset and if that doesn't work either, then you will need to take your phone to your local Nokia Care point for them to inspect.
to locate local Nokia care: http://nokia.com/support
Remember to backup all personal data first -
I have had my Playbook connected in the past and was able to transfer files with the WIFi switched off. On my new laptop with Windows 8 there is no recognition in "Computer" and Blackberry Desktop Software shows no connection.
Is this a Windows 8 problem?See:
http://support.apple.com/kb/TS3716
If you need further help, post in the iPod Nano forum. This is the iPod touch forum. They use different drivers. -
Why can I not download my new purchases from i-tune onto my i-pod nano after I pûrchased a new laptop with Windows 8?
See:
http://support.apple.com/kb/TS3716
If you need further help, post in the iPod Nano forum. This is the iPod touch forum. They use different drivers. -
I've downloaded Windows 7 onto my USB drive and Boot Camp does not recognize the disk.
Following the Apple Support manual, I've initiated the creation of a partition and downloaded Windows 7 from Microsoft's online store to a USB disk. When I attempt to initiate the creation of my partition to install Windows 7, I receive a notification that my installer disc could not be found.
Thanks in advance!Welcome to the Apple Support Communities
If your Mac has got the SuperDrive, you can't install Windows from a USB disk -
My Ipod froze while downloading a software update from Itunes.. now I have a screen with an Itunes logo and the USB cord and my computer does not recognize the Ipod??
See Here for,
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591
And Here for,
Unable to Update or Restore
http://support.apple.com/kb/HT1808
Maybe you are looking for
-
Error message when trying to open Quicktime player 7.2 in Windows Vista
I have tried uninstalling and then reinstalling the Q Player a couple times but I still cannot get the player to run. This is the error message that pops up: Microsoft Visual C + + Runtime Library Buffer overrun detected Program: C:\Program Files\Qui
-
Hi, i am using the SAP B1 - 2005B and Sql Server 2005. I have the taken the back up from other server which is having the same verion and restored in the new one. after the sucessful restoration when i tried to connect the new D/B it shows the fo
-
Can you locate your i touch with a serial number
can you locate an i pod touch with a serial number. Someone took my daughters from her room.
-
Why does Acrobat X Reduce File Size make significantly bigger files?
Drawings at AO size, probably from AutoCad, each pdf ranging in size from 600 to 800kb. No encription. No attachments. No embedded fonts. Reprinted them through Acrobat X Pro to A3 then combined them. Binder size was about 5MB, too large for my c
-
How to use Mysql platform with oracle 9i
Currently it is only supported in toplink 10x and above, for business reasons we need to use toplink 9i workbench, any help? thanks