IBM XL C/C++ Runtime Utilities for R12 and Patching

Hi
Is it true above utilities are not required install and patch E-Business Suite R12? and it is a Installer bug.
Regards

Hi,
Is it true above utilities are not required install and patch E-Business Suite R12?You need to have IBM XL C/C++ Runtime Utilities installed (it is not required if you are using the full version of XL C/C++ Enterprise Edition V8.0 for AIX).
All OS pre-req. software and packages are outlined in the following documents.
Note: 761569.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for IBM AIX Based Systems (64-bit)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=761569.1
Note: 402306.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for AIX-Based Systems
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402306.1
and it is a Installer bug.What bug you are referring to? Could you please elaborate more?
Regards,
Hussein

Similar Messages

ABAP runtime error for 0CRM_OPPT_H and I while running RSA3

hello Gurus,
 I'm having problems while running RSA3 transaction for these data sources.
0CRM_OPPT_H
0CRM_OPPT_I
0CRM_SALES_ACT_1
0CRM_SALES_ACT_I.
I'm getting ABAP runtime error for these.
This is the error:
Runtime Error CALL_FUNCTION_CONFLICT_TAB_TYP
Exception CX_SY_DYN_CALL_ILLEGAL_TYPE
I tried finding OSS notes for these, but I didnt succeed.
I activated the data source from RSA5, and then I tried RSA3. That time I got Errors occurred during extraction.
After that I activated delta at BWA5, then I started getting runtime error.
Even though I activated at BWA5, I am not able to see the data sources at BWA7.
Am I missing any thingplease guide me through this.
Thanks
RKR

Thanks for your replay... All the DS and related tables are active..
But wen I tried to re-generate the DS again... this is the warning I'm getting... Any idea why I'm getting this....
The even-numbered length of the DEC field SAMPLE_QTY_ALLOW can lead to problems
Message no. R8569
Diagnosis
You want to use the field SAMPLE_QTY_ALLOW in the extract structure for DataSource 0CRM_OPPT_I. This field has a field of type 'DEC' (or 'CURR' or 'QUAN') with an even number of characters.
This can create problems since the length resulting from calculations in ABAP (for example, in extractors or Customer Exits for extraction) is too large to be inserted in the database later (PSA in BW), causing a short dump.
Procedure
This warning is only relevant when the maximum length of this field is exceeded during extraction, for example when the field is expanded in the Customer Exit through a calculation.
More information and a remedy can be found in SAP Note 641744.
When I search the OSS note, SAP suggesting to apply 883310 note.
In my company we are using CRM 4.0 servie pak8. SAP suggsting to install service pak 11, but my client is not interested to upgrade to 11 as CRM people are working on service pak 8.
By any chance we can use specific note which change the ABAP code to solve this problem... Please give me some suggetions...
Thanks
RKR

OWB : Runtime Repo for Target and Process Flows on Different M/C

Hi,
I have an environment where the Runtime Repositories for the Target Warehouse and Process Flows ( Workflows ) are on different machines. I have deployed :
* the mappings and Target Tables on the Target Warehouse
* Process Flows on the Workflow Server which resides on a seperate M/C.
When I try executing the Process Flows for the Mappings , it errors out indicating that the objects may not have been deployed. Looks like the Process Flows cannot see the Mappings deployed.
Can somebody help me here ?????

I think target schema and runtime rep shuould be in same instance

Runtime Analysis For Classes

Hi All,
Can we do runtime analysis for Classes and Methods in the same way as program and function module?
Thanks & Regards,
Samir

You can have a look at this thread Transaction SAT - Analyze Performance of Classes in which the OP has written a blog for the question.

Runtime errors for Branched in SXMB_MONI

Hi,
After PI 7.0 has been upgraded to SPS16, every time I try to display a message in status "Branched" from SXMB_MONI I get a runtime error. Also I got an error when trying to display it from RWB Monitor.
Messages in other statuses donu2019t have problems
Any suggestion why is that? Thanks.
Janos

Hi,
It is error Message_type_X, but I don't think it is a SAPGUI problem, since I got the same problem with SAPGUI 710 and SAPGUI 640
Bellow is the extract from ST22.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          22.09.2008 13:50:43
Short text
    The current application triggered a termination with a short dump.
Error analysis
    Short text of error message:
    Control Framework : Error processing control
    Long text of error message:
     Diagnosis
         An error occurred when the system tried to process the commands
         from the Automation Queue on the presentation server.
         There are several possible reasons for this:
         - The installation of the SAP GUI on the presentation server is
         faulty or obsolete.
         - There is an error in the application program
         - There is an error in the SAPGUI or an integrated control
     Procedure
         1. Make sure that you have imported the appropriate Support
         Package, the current kernel, and GUI patch for the release of your
         system
         2. Check whether the error occurs locally on one or a few PCs, or
         generally on all PCs. Note whether the error only occurs for some
         users, for example because of a specific Customizing setting.
         If it only occurs locally, this suggests an installation problem
         with the PC. Check the installation; if necessary, reinstall the
         software. In the dump, search for the SY-MSGLI field, since it may
         point to the cause of the error.
         3. Activate the Automation Trace (in accordance with SAP Note
         158985).
         4.Start the transaction and continue until the screen immediately
         before the dump.
         5. From the System -> Utilities menu, choose Autom. Queue,
         Synchronous Processing.
         The status bar of the GUI displays the text:
            "Automation synchron flush mode on"
         6. If you now proceed with the application, the short dump will
         display the ABAP call that caused the error; the Automation Trace
         will contain the error on the presentation server.
         7. If necessary, load the short dump and trace files on to
         sapservX, so that SAP can analyze them.
    Technical information about the message:
    Message class....... "CNDP"
    Number.............. 006
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLOLEA" or "LOLEAU02"
    "AC_SYSTEM_FLUSH"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.

IBM Heap Dump command line utilities

Hello,
I am looking for command line parameter for IBM Heap dump location in configtool. I know we can set using environment variable IBM_HEAPDUMPDIR but I would like to get some command utilities to set it in configtool.
Thanks in Advance !

Hi,
The JVM checks each of the following locations for existence and write-permission, then stores the Heapdump in the first one that is available.
The location that is specified using the file suboption on the triggered -Xdump:heap agent.
The location that is specified by the IBM_HEAPDUMPDIR environment variable, if set (_CEE_DMPTARG on z/OS(R)).
The current working directory of the JVM processes.
The location that is specified by the TMPDIR environment variable, if set.
The /tmp directory. On Windows(R), C:\temp.
Details : http://publib.boulder.ibm.com/infocenter/javasdk/v1r4m2/index.jsp?topic=/com.ibm.java.doc.diagnostics.142j9/html/contents.html
Regards,
Sandeep

Hardware Requirements for R12 upgrade

Hi
We are planning to perform R12 upgrade(11.5.10.2 to R12) on our dual node Test servers.
Following is the H/W configurations
Node 1:DB + CCM + Admin
=>Database size is approx.38-40GB,2 CPU's & 2GB RAM
Node 2:Form + Web server
=>2 CPU's & 2GB RAM
Is this a sufficient configuration for R12 upgrade.
Thanks
Shekhar

In general, you need to make the best of what you have on hand. If it were me, I would double or triple your RAM especially on your admin/DB tier, unless you only have 2-5 users.
Fast storage will make a huge impact on runtime of the upgrade driver.

Anybody know where to find the DTS DOS Utilities (for use with Boot Camp)?

Ive been looking for the DTS DOS Utilities for some time now. I have an older version of SurCode on the Windows side of my mac and i dont want to spend extra money right now on a upgrade for it. Right now DVDSP3 wont import the DTS files without this utility first. Anybody that can point to a download or that alredy has it to send this way? Would be much appreciated.
Mac Mini Intel 1.83Ghz; PowerBook G4 1.0Ghz Mac OS X (10.4.8) 500GB Seagate, Lacie Lightscribe, Pioneer 7.1VSX-526, Polk Audio RM6005, iPod Nano

Paul,
Descriptive name of the module is set in the window registry. You can only get the BASEPATH like $AP_TOP.
Descriptive name of the page can be found from WEB_HTML_CALL from FND_FORM_FUNCTIONS_VL?
Regards,
Gyan

Adobe AIR with Captive Runtime Support for Mobile | ADC Presents | Adobe TV

In this video, Technical Evangelist Andrew Trice covers Adobe AIR with captive runtime support for mobile application development, which will benefit your Flash Builder projects for the Android OS.
http://adobe.ly/wyNYjD

Witch version of flash builder is this?

Error when installing virtual appliance for r12.2.4

Hello
I have downloaded Oracle Virtual Appliance for Oracle E-Business r12.2.4 in a following step by step manner but I am running into an error. As per the readme, I have gone through the Note:1928303.1 but it does not address the issue.
That said, is there any comprehensive, step by step document that outlines installation and implementation of Oracle Virtual Appliance for r12.2.4?
Below are steps I ran.
Step 1: Downloaded and Installed Oracle Virtual Box version 4.3.22.
Step 2: I want to install Oracle EBS r12.2.4 single node installation on My Windows 8.1 64 bit laptop with 1 TB of HDD and 8GB RAM.
Step 3: Downloaded following files for single node vision appliance.
There are two zip files for each part, so I downloaded total 16 zip files.
V52470-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 1 of 8) Linux x86-64
V52471-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 2 of 8) Linux x86-64
V52472-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 3 of 8) Linux x86-64
V52473-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 4 of 8) Linux x86-64
V52474-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 5 of 8) Linux x86-64
V52475-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 6 of 8) Linux x86-64
V52476-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 7 of 8) Linux x86-64
V52477-01 Oracle E-Business Suite Release 12.2.4 Single Node Vision Install X86 (64 bit) (Part 8 of 8) Linux x86-64
Step 4: Unzipped these files
Step 5: After unzip, unzipped filename looked like following. So I removed the last digit in the extension so that Oracle virtual box can recognize .ova extension.
Unzipped file name:
Oracle-E-Business-Suite-12.2.4_VISION_INSTALL.ova.01
renamed to
01_Oracle-E-Business-Suite-12.2.4_VISION_INSTALL.ova
Step 6. In Oracle virtual box, attempted to import these ova files using "Import Appliance". This is when I am getting following error.
Oracle VM Virtual Appliances for Oracle E-Business Suite (Linux)
Failed to import appliance C:\ova\EBS\INSTALLATION OPTIONS\Option 1 Single Node ALL\0_Oracle-E-Business-Suite-12.2.4_VISION_INSTALL.ova.
Could not create the imported medium 'C:\Users\ova\VirtualBox VMs\Oracle-E-Business-Suite-12.2.4_VISION_INSTALL\Oracle-E-Business-Suite-12.2.4_VISION_INSTALL-disk1.vmdk'.
VMDK: Compressed image is corrupted 'C:\Users\ova\Oracle-E-Business-Suite-12.2.4_VISION_INSTALL-disk1.vmdk' (VERR_ZIP_CORRUPTED).
Result Code: (0x80BB0004)
Component: Appliance
Interface: IAppliance {3059cf9e-25c7-4f0b-9fa5-3c42e441670b}
This is happening with each and every file in above list.
Please advise what am I missing? And if there is a comprehensive document somewhere that outlines details about implementation. The above mentioned metalink note is not enough.
Darsh

You need to merge all of the downloaded files first, before importing into Virtualbox. Google for my blog for detailed steps.

Technical document on P2P & O2C for R12

Hi All,
I need a technical document on Procure to pay cycle and order to cash cycle for R12. In which the process of these cycles and the information about the base tables getting effected by each step is explained.
Thanks

By CDC are you referring to Change Data Capture?
If so, do a search on "Change Data Capture" at http://tahiti.oracle.com, where all the Oracle documentation lives, and you'll get plenty of information. The change data is exposed in a series of tables, so there's no special client-side API-- just querying the appropriate tables & views.
Justin

Reader 9.3 produces Runtime error for all .pdf files on hard drive and email

Does anyone have a resource that can show me how to eliminate a runtime error with Reader 9.3.1, Windows XP w/ SP3 and IE7. I have recently had all .pdf files located on my hard drive and in emails refuse to open because of this message:
"Runtime Error!
Program C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
So far, I have uninstalled and reinstalled Reader 9.3 from the website; added update 9.3.1 and tried to reopen files with no success.
My organization sends a ton of .pdf files and it is not good when you can't open them for review and action.

Hi All,
Although I don't normally post in forums, I thought it prudent to lay this matther to rest. I have tested the following solution:
It appears that Adobe Reader likes to check access to each parent folder as well as the actual application data folder. Apparantly there are other programs that also do similar things. As a result if you have your appdata redirected to \\server1\profiles\%username%\appdata adobe reader would first try directly access \\server1\profiles. If the user does not have to Traverse folder permission, this fails. Typically you will need to change your permissions on you profile share from:
-                   Users - Read Attributes (Apply to: This folder, subfolders and files)
-                   Users - Read Extended Attributes (Apply to: This folder, subfolders and files)
-                  Users - Create Folders/Append Data (Apply to: This folder, subfolders and files)
-                   Users - Read Permissions (Apply to: This folder, subfolders and files)
To the share permissions suggested by Microsoft in KB 274443:
-                   Everyone - Create Folder/Append Data (Apply onto: This Folder Only)
-                   Everyone - List Folder/Read Data (Apply onto: This Folder Only)
-                   Everyone - Read Attributes (Apply onto: This Folder Only)
-                   Everyone - Traverse Folder/Execute File (Apply onto: This Folder Only)
Hopefully this helps everyone.

How to handle runtime exceptions for sync scenario?

Hi Experts,
 I have a synchronous scenario.
 Request :
 webservice -
> sends input data -
> PI -
> SAP R/3 --BAPI
 Response:
 webservice -<--- PI <sends back any validation error or successfully processed message----- SAP R/3 --BAPI
 Here a webservice uses SOAP adapter to send input data to PI. While PI uses ABAP proxy to send data to SAP R/3.
 The problem is when the BAPI takes too long to process and resulting in timeout exception in PI. Is there some way we can catch this runtime exception in PI and send it to webservice as response?
 Please help!
Thanks & Regards,
Gopal

Hi Gopal,
as mentioned by otheres: the main issue is here to detect the reason for performance lack...
>Is there some way we can catch this runtime exception in PI and send it to webservice as response?
You can invoke a Business Process and open a sync / asyn Bridge. In the process call the FM synchronous and define an exception branch which you access in case of system failure. In the exception branch execute a transformation step to fill the response container with a corresponding error message.
Regards,
Udo

Runtime exception for configurable products

Hi Gurus,
I am getting a runtime exception for configurable products on clicking the link You can select more product options in CRM 7 b2c application . But when i login with a registered user and click the same link , it opens up and takes to the page for configuration of products .
Please find the error from logs :
[EXCEPTION]
79823   java.lang.NullPointerException: It was tried to rebuild the connection because of invalidity. It is not allowed because the connection type is not JCoConnectionStateless. You may also check the user authorizations.
79824   at com.sap.isa.core.eai.sp.jco.BackendBusinessObjectBaseSAP.getDefaultJCoConnection(BackendBusinessObjectBaseSAP.java:55)
79825   at com.sap.isa.maintenanceobject.backend.crm.DynamicUICRM.readData(DynamicUICRM.java:121)
79826   at com.sap.isa.maintenanceobject.businessobject.DynamicUI.read(DynamicUI.java:767)
79827   at com.sap.isa.ipc.ui.jsp.action.InitDynamicUIAction.ecomPerform(InitDynamicUIAction.java:67)
79828   at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:375)
79829   at com.sap.isa.core.BaseAction.execute(BaseAction.java:212)
79830   at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
79831   at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:692)
79832   at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
79833   at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:409)
79834   at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
79835   at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
79836   at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
79837   at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
79838   at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
79839   at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
79840   at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
79841   at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
79842   at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
Can anybody help me out to find the issue .
Thanks and Regards,
Tony Isaac

Tony,
It looks more like an issue with the loading of the JCO properties before the logon. Can you go to XCM and try reentering the password and save the config. Once done do a test connection and restart the application.
Then set a breakpoint in the BackendBusinessObjectBaseSAP class in the method getDefaultJCoConnection().
Here when the current connection is invalid it tries to read the config properties from XCM. Just check if it is reading the correct values from the config ISA_COMPLETE which is read on the backend object.
In case of mismatch, you need to fix that or you could try to build a new JCO connection with your own parameters.
Pradeep
Edited by: Pradeep Kumar on Mar 11, 2010 6:20 AM

Provide the list of CPU patches for r12.1.2 and r12.1.3.

Hi,
can you provide me the exact number of CPU patches for R12.1.2 and R12.1.3, and other recommended patches.
thx

Hi,
Please see these docs/links.
Note: 986534.1 - Oracle E-Business Suite Releases 11i and 12 Critical Patch Update Knowledge Document (July 2010)
Note: 244040.1 - Oracle E-Business Suite Recommended Performance Patches
Note: 950896.1 - Oracle E-Business Suite Recommended Performance Patches II
Note: 756671.1 - Oracle Recommended Patches -- Oracle Database
My Oracle Support > Patches & Updates > Recommended R12 Patches/Latest R12 Packs
Thanks,
Hussein

IBM XL C/C++ Runtime Utilities for R12 and Patching

Similar Messages

Maybe you are looking for