IBolt dock w/ music and navigation enabled - Line out speaker glitch

This has happened 4 times since the JB update when in the car dock mode while cradled in the iBolt.
connection:
- cradled in iBolt dock
- connect line out to vehicle input jack
- enables car dock mode
steps:
- play a music app
- start navigation app
- proceed to destination
trigger:
- line out connection glitches when voice navigation speaks
symptoms:
- sound starts to come out of phone speakers and line out stops
- sound comes out of both phone speaker and line out simultaneously

I believe this problem is partially due to an improper reload I was just notified of. I have reset the timeouts to 70, and although I am still unsure as to why two of the phones reset to 10 (most likely causing this issue), the issue seems to be solved for the moment, hovwever I will keep this thread open to any suggestions in case this solution in fact does not solve the issue. The real test will be the business day tommorow .
-Pat

Similar Messages

Plugged my headset for the first time into my iphone4 to listen to music and the sound came out thru the phone and not the headset, anyone else have this challenge? Help

Plugged my headset for the first time into my iphone4 to listen to music and the sound came out of the phone and not out of the headset. Anyone else experience this problem? is there a way around it?

Sorry saker, but if you have not backed up your data anywhere, and you told the computer, in essence to clear the data and restore it with your iPod data, then you are pretty much out of luck....
Cheers,
GB

I just purchased a new iMac. My iTunes account is missing a ton of music and I cant figure out how to access it. When I try to load music from my ipod to match my imac it only asks if i'd like to sink my ipod with my account. How do I access my library?

I just purchased a new iMac. My iTunes account is missing a ton of music and only contains "purchased" music. When I try to load music from my ipod to match my imac it only asks if i'd like to sinc my ipod with my account. How do I access my entire library? Thanks

Unless you subscribe to Match, you will have to transfer your non-iTunes stuff from your old computer:
http://support.apple.com/kb/HT4527
If you want to copy non-iTunes music off of your iPod (eg, if your old computer doesn't exist), you'll need to use a third party program. I don't know of any free ones anymore, but if you google, you can find several in the $19 range.

HELP!!! I lost all my music and can't figure out how to get it back.

I had iTunes downloaded on my computer. Unfortunately I got a bug or virus that deleted everything including my iTunes. So i got my computer fixed and downloaded iTunes again but then it told me my iPod was synced to another computer and then asked if I wanted to transfer and erase. I'm thinking it's going to transfer what i already had....WRONG it just deleted everything!!! How do I get that library back AND download it back on to my shuffle?

If the lost music is no longer on your iPod, on your PC, or in another backup somewhere, you are out of luck. You can download most iTunes purchases again at no cost via iCloud. See this article for more information and assistance.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
For non-iTunes purchased content, you'll need to redownload or rerip them from their original source.
B-rock

Music and comercials keep playing out my speakers, even when everything is closed. What is going on?

My computer can be on while i am working or be on hibernate mode, or stand-by. But at random times throughout the day or night, it will just start playing music, commercials, or news broadcasts. I can't see anything on my computer, I can only hear it. It does stop if I disable my connection though. But as long as I am online, it plays.

You can also check these for the disabled XULRunner 1.9.1 extension (considered malware) in your system details list.
*[[/questions/743526]]
*[[/questions/749007]]
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Line Out Speaker Problems, but Headphones work just fine?

So my computer was working beautifully yesterday, but today, my speakers sound awful. The bass sounds alright but any treble just sounds echoey and/or scrambled. It's also just really quiet at times. My headphones work just fine though. Any suggestions?

If the headphones are OK, then check your speakers. If they are powered speakers there may be a problem with the speaker's amplifier or you could have a loose connection.

Universal Dock: Line Out isn't really Line Out!

I recently purchased a new Apple Universal dock for use with my Ipod touch. The goal as to access the line out port to hook up to my stereo (driving a stereo through the headphone jack is not the way to go)
I was led to believe that the Line Out capability of the Ipod touch bypasses the internal headphone amplifier, thereby solving all the problems inherent in using the headphone jack (i.e. impedance mismatch, volume too low, etc.)
Such is not the case. With the Universal dock's line out, the sound is exactly as crappy as through the headphone jack, and when I put the output on the scope, it was nowhere near the standard line-level voltage.
Any ideas as to what gives here? I suspect the Universal Dock is not really providing a line out at all....

The iTransport turns any currently available iPod player into a high-end media server by providing a bit-perfect digital audio output to an audio/video system, bypassing the player’s internal digital-to-analog conversion (DAC) and analog output stage. Subsequently, the audio signal remains clean and unadulterated throughout the path, outputting a “bit-perfect” digital stream. The iTransport is compatible with:
All Current iPods All iPod Nano Models The iPod Classic Models iPod Video Generation 5 Also the New iPod Touch/iPhone Models
To ensure compatibility, please make sure your iPod has received all software updates before docking it with the iTransport
“The Wadia iTransport is the coolest product I’ve encountered in some time. If you own an iPod and a high-end system, the iTransport is essential!”- Robert Harley, The Absolute Sound, November 2008
“The iTransport let me hear every detail as readily as did playing [a disc] on the [$6200] Simaudio SuperNova. If there was a difference between the original CD and the digital output of the iTransport, I never heard it!”
- Wes Phillips, Stereophile, Class-A Rating, October 2008
“This is a brilliant product! One that finally lets the iPod be all that it can and should be. It took the imagination and know-how of a firm like Wadia to pull this concept off. The real genius of the iTransport is that it lets you pull digital audio straight off the iPod and route them to a superior-sounding outboard DAC. You’ll have an audio player that not only rivals (but in some cases handily outperforms) multi-thousand-dollar music servers and CD players!”
- Chris Martens, Playback Magazine, August 2008
“Until now, there has been no real bridge between the convenience of an iPod and the high-end audio listening experience,” commented John W. Schaffer, President, Wadia Digital “The goal of making the player a true high-end media server has been hampered by the need to send the digital signal through a portable player’s D/A converter rather than that of a high performance audio system. We designed iTransport to bypass the player’s converter and output stage altogether. When used with an iTransport, theiPod becomes a digital music source equal to some of the finest sounding transports in the high-end audio market.”
Along with turning an iPod into a high-performance audio server, iTransport is one of the first docks to access video content stored on currently available iPods. Similar to the audio section, the video signal is made available via high performance component outputs that provide up to DVD-quality video.
The Wadia 170 iTransport measures 2” x 8” x 8” (H/W/D), making it an easy addition to most racks and entertainment centers. Wadia incorporates a bit-perfect S/PDIF digital output and high-resolution component digital video output, as well as analog audio and video outputs for easy connection with most audio/video systems. Your iPod will be charged while in the dock and the iTransport comes complete with a remote to control all iPod functions.
“I can tell you this much, it sounds fantastic! The dream of the iPod being a true audiophile component has now been realized and the sound quality is limited only by the DAC you own….the iPod through the 170 fooled a lot of people at my place into thinking they were listening to a five figure player!”
– Jeff Dorgay, Tone Audio, Vol #14 2008 (pp. 134-136)

Nano Dock Line-Out isn't working

I just got a new Nano and Nano dock....when trying to connect it to my home stereo with the dock and lin-out connector (using a mini to dual RCA jack adapter), I get absolutely nothing on the stereo. The dock is plugged into the wall with a USB power adapter and shows charging so there is power to the dock.
Other devices into the stero work on those inputs so it is working fine. Are there some option settings somewhere that I have to enable to get the the Nano to enable that line out port on the dock?

I think I have figured out what is happening.
I had the same problem, and couldn't understand why the supposedly fixed line level was so extremely low suddenly.
As it turns out it is possible to change the volume of the line out signal using the normal volume control even when the nano is in the dock!
When the nano is placed in the dock the volume is pre-set to the correct one, BUT if you manually turn the volume up to maximum level, then the line out signal is muted!
I guess the volume should really be fixed, or at least not adjustable via the normal wheel, when the nano is in the dock. Why max level mutes line out is anybody's guess...
(I use the new universal dock.)

IPod Universal Dock - line out?

Does the Universal dock provide line-out audio, or is it variable audio only? If only variable, can I use an older iPod photo dock with my 60 GB iPod w/video? That one has line-out, doesn't it?

Hey, I used my old dock and connected the line-out and s-video with my new 5G and everything works fine.

Syncing only music and playlists

Why can't I just sync my playlist and music between my iMac and my iPad? It always wants me to sync my apps and everything. I would like to only allow iTunes to sync my music and playlists, bottom line. Can anyone suggest anything? Thank you!

iTunes: Syncing media content to iOS devices and iPod - http://support.apple.com/kb/HT1351 - detailed example: https://discussions.apple.com/message/18860187
iOS: Syncing with iTunes - http://support.apple.com/kb/ht1386 - You can sync everything or selected playlists. "WIth iTunes 10, when automatically syncing, you can also manually drag items to the iDevice. These will show up in Manually Added Songs at the bottom of the Music tab after Playlists, Artists Genre, Albums." - https://discussions.apple.com/message/18919754

Internal speakers and line out at the same time?

I'd like to connect my Touchsmart 300-1125 to my stereo amplifier, to sometimes be able to play sound through the amp. The problem is that the internal speakers go silent whenever there is a cable in the line out jack (3.5 mm), so for times when I don't need the amp I have to fiddle with the cable to enable the internal speakers again.
Can I configure the audio driver so it doesn't disable the internal speakers when there is a cable in the jack?
(note that my model doesn't have the audio "phono" plugs on the rear, just a 3.5 mm headphone jack on the side and a 3.5 mm line out jack on the rear)
Thanks
Mike

Thanks Vidya,
I was hoping for a solution in the direction of your second link, ie a driver upgrade that would offer more control over the audio chip settings. It seems though that Analog Devices that delivers the audio chip for my Touchsmart doesn't offer any driver downloads, and refers back to the PC maker. And there is no audio driver when looking at downloads for my model on HP's site...
Anyway, inspired by this article http://forum.onmac.net/showthread.php?t=1239 I went ahead looking in the Registry and found this key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}\0000\AD1984A\FrontShutsOffInternalSpeaker
and when I set it to REG_BINARY:00 it seems to do mostly what I want, always leaving the internal speakers on. The only little annoyance is that it it leaves the speakers on both when I plug into the headphones jack and the rear line out jack, while I would have preferred to keep the auto-shutoff feature for the headphone jack.
Best regards
Mike

CPU whine with DVI and line out/DVI removed whine not in line out?

I have noticed that when using headphones or the line out alone I do not hear the whine noise. The whine noise is still active, in other words, I can still hear it coming from the keyboard. But, it is not transferred through the line out or headphone jack. THIS IS BEFORE I DO ANY TRICKS: mirror widget etc.
But, if I plug in the DVI adaptor and utilize the line out/headphone jack, the noise now appears. This means if I am running my laptop to do a presnetation, the noise will appear through the sound system. However, if I don't use my laptop for video and use it for audio only, the noise is not THERE!
Of course, I can use the tricks and it will eliminate it. But this leads me to believe that something is related? The DVI connection with the entire mother board....or something. Any comments? Please help

I agree. I never use line in/out of the computer for professional work. I had PCI expansion chassis doing that type of work when using the PowerBook, and am eagerly awaiting Magma's upgrades which will come soon per their emails. However, I do use my portable computer to teach and to present research, at which point lugging a full blown professional system is not an option. In some cases, it would be nice to use the line out while presenting, without having to carry additional equipment.
In any case, the problem does exist and is one that shouldn't exist. The fact that there are workarounds does not "fix" the problem or for that matter acknowledges it. Apple should acknowledge the problem and replace the faulty parts in the machines affected. I bet that if it was the other way around, say plugging something in the headphone jack would affect the screen resolution, people would be all over the place, and the solution could not possibly be, "just hook an external monitor and it will work fine".
In the meantime, I am just trying to find out if this is a widespread issue or not to see if it makes sense to return the machine, with which I am absolutely happy otherwise even with the other problems reported.

HT5012 After downloading the IOS7 the music and speaker sounds crackled with background interferences. How can I resolve this problem?

After downloading the IOS 7, the music and speech sounds turn out crackled on my IPad 2. Why is this so? I wonder if other users are experiencing this problem. I regret downloading this new IOS 7.

Reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

GX740 - Anyone get two TRUE separate audio streams out Headphones and LINE OUT?

Hoping for an update on this. I asked MSI via their support section and wow... what a FAIL that was:
Quote
Do you have new specific drivers that allow TRUE 4 channel output? 2 out the headphones and 2 separate out the LINE OUT as implied by the design? I've tried everything and it doesn't work.
I've tried ASIO4YOU drivers - doesn't work.
I've tried every RealTek driver out there - nothing.
Yes, I've set the RealTek driver to do multiple out but it sends the audio out the HDMI port, NOT THE LINE!
I know this can be done cause you can set the REALTEK for 7.1 and you get separate streams out the headphones and line-out ports!
Please - you've sold a laptop with "Headphone Out" and "Line Out" yet it fails to actually do that - NEW DRIVERS PLEASE?
Posted: Feb 11, 2011 by Peter Stone
All Posts
Dear Customer,
Please go to msi global website to download the audio driver,then install it.
audio driver:
http://www.msi.com/service/download/nbdriver-15227.html
Needless to say, that did nothing. In fact, I can't understand how I could of received such an answer given it made no sense what-so-ever. Download the driver that came with it? One that's now almost a year old?
Regardless... I've tried that one. I've tried the latest RealTek drivers. I've tried a multitude of ASIO drivers. NOTHING WORKS. Yes, I've set the RealTek to send TWO SEPARATE STREAMS. That does NOTHING. The only thing I've been able to ascertain is that you can send one stream out the headphone/line out (same thing) AND one out the HD port which is useless.
Here's the pain in the ass: If you go to the RealTek setup and change it to 7.1 and hit TEST, you DO hear separate output out the HEADPHONE JACK and the THIRD Audio Out jack which is the side fills so I know this laptop CAN spit audio out two separate outputs sitting on the side of the computer.
Why do I want to do this:
Simple. I'm lugging around an external audio interface for DJing and it's a pain. I'd rather just tap the headphones out for, well, headphones and send the line out or that third audio output to the DJ mixer. Done! I've tried MIXMEISTER, VIRTUAL DJ, NOTHING WORKS! I can select various strangely named outputs insinuating speaker out, speaker out + 1, etc... but no... it doesn't work at all...
Sooooooooo... has ANYONE been able to get this to work? I'd love to know...

Yea Stu... been through this part... Playback devices show the typical:
1. Speakers (Realtek) -> Plays on ext. speakers but sounds like just treble. Headphone Out plays this stream.
2. RealTek HD Audio 2nd output -> Plays on ext. speakers but sounds like bass/mids. No treble. NO OUTPUT PLAYS THIS. Plug anything in and sound from the speakers just shuts off
3. Realtek HDMI Output (Not selectable)
4. Realtek Digital Output (Not selectable)
So yea, it seems right out of the box there is a problem with the sound on this unit. Choosing speakers sounds like crap (no mid/bass) and choosing HD Audio 2nd output sounds like crap (all mid/bass no treble).
There is no discrete dual audio out the jacks.
HOWEVER - Go choose 7.1 from the realtek setup and do a test. Well what do you know, DISCRETE 2ND AUDIO OUTPUT OUT THE HEADPHONE JACK AND THE 3RD OUTPUT JACK OF THE 4 IN A ROW. This PROVES you can have two discrete stereo audio streams coming out the output jacks. Just need someone to write the driver for it.
Here's the thing. This laptop HAS 4 1/8" JACKS. SEE:
Here's what the manual says about the output jacks:
Mic In:

Line out audio distortion

My headphone jack works fine when connected to the tape adapter in the car or to the stereo or my computer speakers. But when I use the Line Out of my car charger (which uses the digital audio out of nano) same as my Dock at home, I get a hum. And it's like the default volume is way to high on the nano or way too much something, making it buzz and hum.
Any takers? I'm at a loss. Again, headphones fine and, fyi, the line out of the dock to computer speakers is fine, just not to my home stereo. And it's the same using totally different cables and devices in my car, same scenario though. help

it sounds like thats happening because its a powered
unit
So does this happen to everyone's "powered" dock and/or in-car charger with audio/line out? The only power to the dock is the Apple USB 2. There's so much static and crackling, it's just obnoxious sounding, but then it works fine using the headphone jack. Isn't it odd that it's in my car and at home with an Apple brand nano dock. Anybody found this themselves? Or a sollution?

IBolt dock w/ music and navigation enabled - Line out speaker glitch

Similar Messages

Maybe you are looking for