IBook app, does not start !

Hi
The iBook app does not start !
I can't get into the library, it takes a minute at the gray background without shelfs, and then goes out.
I tried somethings like:
-remove books by iTunes and re sync them.
-reset the phone
-turning off and on the phone
but still have problem.
Safa

Howdy Safa,
If you are having an issue with your iPhone's iBooks application not being able to launch, and you have already tried resetting and restarting the iPhone, I would suggest the next step would be to back up any data on your iPhone and restore it as a new device. See this article for directions -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

HT201250 Time Machine App does not start under OS X Lion

I tried to restore an item from my back-up, however the Time Machine App does not start.
I use the latest version of OS X Lion 10.7.5 (Build 11G63).
I used the work around by opening my back-up volume with the finder and copied the wanted item.
However, this is not the correct approach I think.
Does anybody have a solution to my problem?

Just the last addition to my question.
The modifications of the access rights took very, very long. In the end I cancelled the process.
Nevertheless, time machine now works correctly. As far as I can see it.
If annybody runs into similar problems. The solution is I think just to modify the access rights on the back-up volume to read and write access for everyone.
Probably OS X Lion added an undocumented feature to the time machine.

Adobe Reader for the BlackBerry PlayBook Showstopping Issue: App does not start

Hello;
I would like to report an issue with the Adobe Reader app for the BlackBerry PlayBook which renders the application fully unusable. This issue occurs everytime. This issue has been tested and verified to occur in two distinct BlackBerry PlayBook devices.
Here is a screenshot stating what version (10.0.3.325) of the Adobe Reader app I have installed:
This, I understand, is the latest version for my platform. Unfortunately, the application does not start. Attempting to run it results in a blank screen after showing the BlackBerry logo. The blank screen can be seen in the following screenshot:
It is also strange that the application does not appear in the Application Permissions list, as seen in the following screenshot:
Is there a fix for this showstopping issue? What steps should I take?

Same issue here. Playbook support knows about it, and referred to Adobe. The Adobe forum has this comment. Looks like our Playbooks are abandoned as a platform.
"Mar 4, 2012 7:20 PM
As the tablet market continues to evolve, we continue to evaluate how to best support the market and where to focus on our resources. Because of this, Adobe has decided to end its support of the RIM QNX Playbook devices in March 2012. This means the ability to create new applications for submission to the RIM store will no longer be possible in Adobe Viewer Builder as well as the ability to rebuild existing targets for new releases of Digital Publishing Suite. Any existing QNX targets will be removed from the manage view inside Viewer Builder".

TS3960 After upgrading to Lion server 10.7.4, Server.app does not start.

I upgraded from 10.6.8 Server. The Mac OS 10.7.4 starts fine, but when attempting to launch 'Server' (which does appear in the launchpad) nothing happens (the application does not start).
I checked for this:
sh-3.2# sudo launchctl list | grep -q com.apple.servermgrd && echo loaded || echo not loaded
loaded
Thank you in advance for any help on this front. AV

I got solution.After I reset the Server.App i could able to login the Server.App.
For reference : http://krypted.com/mac-os-x-server/hosed-your-mountain-lion-server-reset-it/

Errors on startup - app does not start

I tried to start photoshop today and received two errors and the app will not start. I tried un-installing and re-installing (cloud apps), but I encounter the same errors
Can't post screen shots - you can't read them. First error says "Could not load actions as an unexpected end of file was encountered" The second one says "Could not initialize photoshop because the preferences file was invalid (it has been deleated)"
any idea what I could try. I haven't installed any new software. PS worked a few days ago, other programs working OK, even cloud stuff

Delete the preferences in the prefs folder:
Important Directories
and since this may indicate that you have systemic issues that damage files, you might wanan read some of that and act accordingly:
Installation Preparations
Work File Safety
Mylenium

New apps does not starts

I had this problem for a while now with small applications for OSX Mountain Lion that doesnt need to run installation. I can't start them, after double clicking nothing happens. When I do the same on another OSX computer they work fine. Does anybody know what I can do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Some apps does not start automatically at start up

Hi guys.
I've noticed a little problem with my automatical start up apps. I have a few there: Growl, Dropbox, Fantastical... and also Quicksilver, but it doesn't load as the others. I have to run it after the whole start up.
I have the "Start at login" field marked in the Quicksilver preferences panel.
Any ideas?
Thanks!

I think the problem is related to the quarantine bug in osx-lion.
http://reviews.cnet.com/8301-13727_7-57374676-263/workarounds-for-quarantine-bug -in-os-x-lion/
the developer of herald send me some code i had to enter in console, and it worked!

[Lollipop] App does not start: screen freezes

This might be a bug because I noticed once I plug the charger in my Z2 and try to start an app (say Clash of Clans) a white screen just slides through and nothing happens. I just press the multi tasking button to force-close it. Also tried to force stop the app before relaunching it, same problem. Tried to restart the phone via the power button, however it takes longer time than normal before it boots up again, like 3 to 5 minutes. What could be the cause of this issue?

Try Clearings the SmartConnect app data.
How to clear data on apps.
From your Home screen
1. Tap the Application screen icon.
2. Find and tap Settings > Apps.
3. Swipe to the All tab.
4. Find and tap on the smartConncet app.
5. Tap Force stop > Clear data.
6. Restart the phone

My iBook G4 does not start or boot. The screen does not light and the start up chime does not sound. What should I do? Please help.

But I think it still works since I hear noises inside the machine and the caps lock still lights up. It just won't start.

Hi, Toby. Welcome to Apple Support Communities.
Have you tried resetting the PMU?
http://support.apple.com/kb/HT1431?viewlocale=en_US
This is the first troubleshooting measure an Apple Authorized Service Provider would try.

The start/stop bar on my i Tunes app does not respond properly. Please advise.

The start/sop bar on my i Tunes app does not respond properly. Please help.

It can be that the library path, or files, are corrupted. What happens if you set a different path to save the library?

App Rejection: After purchasing the subscription the magazine does not start to download.

Hi Everyone,
My app has been rejected, with error code 2.2 that it exibits bugs namely "After purchasing the subscription the magazine does not start to download.".
When I've gone back to test my app on the ipad, I've realised that it doesn't say 'purchased' after confirming the subscription, and instead it still says 'buy' and the subscribe button is still enabled.
I've followed the instructions in this article: http://helpx.adobe.com/digital-publishing-suite/kb/subscription-fail-ios-renditions.html, I've set all published dates to the 29th of October 2012 both in the Folio Producer Organiser and in itunes connect (Newsstand, in-app purchase section) and it still doesn't work. I've entered the secret code in the administration area also. The subscription product ID is identical in itunes connect and the Viewer builder. I've deleted the app and re-downloaded it multiple times on the ipad, updated the folio in the folio producer many times...
Can anyone see what I might be doing wrong? Is there something I have missed?
I appreciate your help.

@FLTAron, were you able to resolve your issue, 'cause I am facing exactly same issue

Settings (and other Apps) Will Not Start (Metro)

This morning most Modern Apps will not start on my system, including the Settings app. It seems to be a DCOM failure and seems directly related to this old thread.
http://social.msdn.microsoft.com/Forums/en-US/7e6fe520-af09-4a38-b333-30ed5978f70c/control-panel-will-not-start-metro?forum=windowsdeveloperpreviewgeneral
This is a current Windows 8.1 installation, full up to date on patches, and the problem still occurs after rebooting. I checked for newly installed patches, etc. and the only thing recent was the Windows Defender definitions update.
It's an i7 with 32 GB of RAM, fast SSD's etc. I don't believe this is a hardware problem in any way.
Here's the details from the System event log:
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          19-Jun-2014 09:21:53
Event ID:      10001
Task Category: None
Level:         Error
Keywords:      Classic
User:          SARSYS9\Michael Sargent
Computer:      SarSys9
Description:
Unable to start a DCOM Server: microsoft.windows.immersivecontrolpanel as Unavailable/Unavailable. The error:
"15612"
Happened while starting this command:
"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-19T13:21:53.648625200Z" />
    <EventRecordID>546613</EventRecordID>
    <Correlation />
    <Execution ProcessID="972" ThreadID="4068" />
    <Channel>System</Channel>
    <Computer>SarSys9</Computer>
    <Security UserID="S-1-5-21-802678348-186571299-231467638-1001" />
</System>
<EventData>
    <Data Name="param1">"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel</Data>
    <Data Name="param2">15612</Data>
    <Data Name="param3">microsoft.windows.immersivecontrolpanel</Data>
    <Data Name="param4">Unavailable</Data>
    <Data Name="param5">Unavailable</Data>
</EventData>
</Event>
That matches almost exactly with the referenced thread. But that thread never seemed to give a set of steps to resolve the issue (other than doing a Refresh which would be a catastrophic waste of time, reinstalling my whole development environment).
I really would appreciate some help resolving this issue. If I'm in the wrong forum, please move or suggest a more appropriate place.
Thanks,
    Mike

Please post questions and problems about using Windows in the Windows forums on
http://answers.microsoft.com
The MSDN Windows Store apps forums are for developers to discuss writing their own Windows Store apps.
--Rob

Itunes does not start and i cannot sync my iphone 4

I have installed Itunes 10.1.1.4 on my computer running Windows XP but it does not start. This prevent me to sync my new iphone 4.
Previously I had other versions of itunes on the computer and sometimes the same problem happened.
I did a search on Apple support and I followed the instructions (itunes disinstallation and reinstallation) but it didn't work.
I tried also to disable all the startup app but itunes using msconfig (as again suggested by apple) but it din't work as well.
Somewhere on internet I found that Bonjour could create the problem: using services.msc I disabled it but it din't work as well.
I would appreciate very much if someone could help me.
Thanks in advance.
Regards
Giovanni

Hello tomcat.vdm,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Best of luck,
Mario

Reminders App does not work on Yosemite with two iCloud accounts.

The Reminders App does not work on Yosemite (10.10.1) with two iCloud accounts. It seems like when there are two iCloud accounts connected in Yosemite (10.10.1) the plist file for Reminders disappears.
I have tried restarting Reminders; restarting the mac; starting the mac in recovery mode to repair the disk and disk permissions; and starting the mac in recovery mode and reinstalling OSX.

Yes sharing Reminders list works. The problem is, I have one shared iCloud account with a colleague (shared calendar, Reminders and email). It makes it easier to run our business with a single shared iCloud account...I know it's not the typical usage.

Zune Software does not start on WIN 8.1 PRO

whenever I need to run ZUNE software to update my phone or just edit my music collection my Zune software does not start. I only get a window alert saying [Windows cannot find 'C:\Program Files\Zune\Zune.exe'. Make sure you typed the name correctly,
and then try again.]
Troubleshoot performed:
-uninstall software, reinstalled with administrative privileges, run the program and does not start, end up with same message. (many, many times)
- Installed it in different directory, installed all windows updates, run program and same symptom
- installed the MUSIC app from windows Store, helps but does not let me edit mysong collections app really is not the appropiate one
-cannot download my photos or videos, please HELP!
*** Is there a way I can download my pics and videos without ZUNE? Is there a FIX IT program for Windows 8 PRO, just in case there might be a problem with registry entries? ***
Machine DELL XPS
Windows 8.1 PRo
Intel Core i7 - 16 GB RAM 64 bit Operating System, x64 based processor

Whaaaaaat...???????
It is not compatible? How do i transfer my music, pictures, videos.??? Cant beleive it..!!
HELP HELP

IBook app, does not start !

Similar Messages

Maybe you are looking for