IBook cannot connect to woreless router with airport card

The Situation
my iBook G3 dual usb cannot connect to my wireless router. The router is using wpa and wpa2 encryption and broadcasting on 802.11b and g, on channel 12. The SSID is broadcast, but the iBook airport card cannot see it. The card CAN see other networks in my area. My iMac Mini (spec OS X 10.5.5, airport built in) is connecting to the same router and can see the SSID, so its not the aerial.
I select 'Other...' on the airport menu to connect, and type in my network name and the WPA2 Personal password. I then get the message: 'The Wireless Network <network> does not support the requested encryption method'
So what's the problem? And how can I fix it?

I'm having the same problem, but having been through the threads I'm getting nowhere!
Running a 2001 dual USB G3 Ibook. Connects fine on home network via Airport Express, but will not connect to PC/Belkin wireless network at my Dad's place. Newer macs seem to connect fine - but not my old dear.
It detects the network OK and prompts for a WPA password, but it is not recognised.
The router is set up for WPA/WPA2-PSK (AES encryption)
Tried turning the security protocols off on the router - still can't connect.
Same circular "network settings have been changed by another application" if I try and use the IBook's network / airport wizards.
My software is fully up to date - the ethernet connection works fine with the router.
This is driving me insane!

Similar Messages

I cannot connect to my wrv200 with sony ericsson p990 & nds lite...

I cannot connect to my wrv200 with sony ericsson p990 & nds lite...

for getting connected to the NDS through the router , try out the mentioned steps on this link ..
regarding sony erricson P990....i guess u will need to look into its wi-fi settings..
ensure that if the router has the wireless security enabled on it..it is supported by the devices....NDS lite only supports WEP....not sure about P990

I suddenly cannot connect to any wifi with my ipad 1. In settings my wifi is turned on. My home connection shows up under Choose a network and has a strong signal.

I suddenly cannot connect to any wifi with my ipad 1. in settings my wifi is turned on. My home connection shows up under Choose a network and has a strong signal. I have reset the Wifi under General. But when I type in my password it still says, "Unable to join the network."

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Trying to connect Verizon wireless router to Airport Extreme but error says Ethernet unplugged.

Trying to connect Verizon wireless router to Airport Extreme and error says Ethernet Unplugged.

So, AirPort Utility running on the Windows Vista desktop can "see" the AirPort Extreme and displays its icon, but gives that error message at some point in the setup process? How far does it get?
Other questions that may help me (or somebody else) understand your problem better:
Which of the pieces were verified as working before the introduction of the AirPort Extreme?
Did you have the desktop computer attached to the Verizon GT704WGB with one of the Ethernet cables you are now trying to use? Which one? Have you tried the other one to be sure it also works?
Are you using the same port on the GT704WGB? Have you tried another one?
If the desktop has multiple ethernet ports, are you using the same one?
Had you done any special configuration of the ethernet port on the Verizon GT704WGB to get it to work with your desktop?
What category ethernet cable are you using? 3? 5? 5e? 6?

Extend Range of Belkin Wireless Router with Airport Express Base Station

I would like to know if I can extend the range of my Belkin N1 Wireless Router using the the Apple Airport Express Base Station?
If so, can someone help me to find out which settings/configuration I need to set of my Router and Airport Express in order the extend the range of my network.
Thank you in advance for your support.

DLink Xtreme wireless N cabled to the Time Capsule 1TB - Simultaneous dual-band Wi-Fi. In addition to extending wireless range, would this also allow me to connect cabled devices to the Airport? In essence, increasing the number of cable ports available on the network?
Connect an ethernet cable from one of the LAN <-> ports on the D-Link router to the WAN (circle icon) port on the Time Capsule.
Configure the Time Capsule as a "bridge" to use the exact same wireless network name, exact security and password as the D-Link router and you will in effect, have one large wireless network. Computers will be able to "roam" from one area to another and they will automatically connect to the router with the strongest signal.
The ethernet ports on the Time Capsule would be active and operate exactly the same as the LAN ports on the D-Link. Computers could plug into either router for an ethernet connection.
The toughest challenge in this type of configuration with routers from two different manufacturers is that they typically use different names for security types. If the security settings between the two routers do not match exactly, you won't have one network, you'll have two, each requiring a separate log on.
Check the configuration pages on the D-Link to see what type of security it is configured to use. Hopefully, it is +WPA2 Personal+, since that is the most compatible type of security among devices. Or +WPA/WPA2 Personal+ would work.
If the D-Link does not use this type of security, what is it using now? What are the other WPA associated settings that are available? We need to know this in order to provide you with the correct step by step configuration.
Post back with your questions and findings.

TS1368 Still cannot connect to iTunes store with iPad2. Have tried all suggestions.

I cannot connect to iTunes store with my iPad2. Not sure why. If anyone has suggestions, I'm all ears... Thanks so much!

Don't know if this has any bearing on the conversation at hand, but I ran into this issue last night. Started when I couldn't purchase anything via Comixology. Which caused a lot of swearing.
But then realized, that I couldn't get to the Apple store either.
Figuring that it was my wifi access point being a jerk, I reset that. And "forgot", then reconfigured my wireless.
Still nothing.
At this point, I checked our ISP (Charter) to see if they had an outage. They did. DNS servers were hosed. I gave up and went to bed.
This morning. Same thing. One thing I noticed, was that all of our computers -- not iDevices -- had no problems. Weird.
So I checked the firewall, and found that every request was going to Malaysia, or Thailand. I have country blocking enabled on our firewall. So, I thought that was weird. Checked the IP addresses that were blocked, and found that they were Akamai addresses. I allowed one device through, to test, and everything works.
Wondering if Apple is leaning on Akamai for the flood of traffic that the IOS 6 upgrade is causing.
In any case, if your ISP, or firewall, router, what-not blocks Asian rim countries, it's worth a check.

Can't connect to the internet with airport or firewire

I can't seem to connect to the internet with airport or firewire. I recently restored my old G4 mac mini PPC 1.42 (with airport and bluetooth) Tiger 10.4.8 with a new harddrive. I have it connected to my leopard mac pro, internet sharing is on (both computers), the systems are connected, however, the mini just can't connect to the internet. tried it also using airport, no go. network diagnosis seems to go in a constant loop.

works ok with ethernet connection though.
that'll work.

After updating my iPad 2 to iOS 6, I cannot connect to my router. I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works. Any other suggestions?

After updating my iPad 2 to iOS 6, I cannot connect to my router. I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works. Any other suggestions? It is obvious many others are having similar problems, so the iOS 6 looks like a loser.

I have just upgraded from a 3 to a 4S and now I can't connect to my wifi. I've tried everything, resetting network settings, switching to boot, renewing lease, rebooting, turning off cellular data etc etc. nothing works!! Very frustrating!

ERROR:Cannot connect to Host: [MTW02SDEP02] with user name: [Administrator]

Dear All,
When I try to deploy WD application, it gives me this following error and doesn't deploy.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [MTW02SDEP02] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. No server is running. [Root exception is
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
     at com.sap.engine.services.security.remote.login.RemoteLoginContextExt.<init>(RemoteLoginContextExt.java:34)
     at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:81)
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:355)
     ... 38 more
Caused by: com.sap.engine.services.rmi_p4.P4ConnectionException: Possible problem: no available running server node. Check your running servers.
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:709)
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:697)
     at com.sap.engine.services.rmi_p4.Parser.newRequest(Parser.java:180)
     at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:427)
     ... 1 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted

Hi
Try this
1. Is this is the remote server?
   if yes make one entry in host file under C:\WINDOWS\system32\drivers\etc
    format   : <server ip> <servername>
    restart NWDS
2.If not then put the Ip address instead of name inside Window--preference --Sap server Check.
3. Put some different UserId and Password who has deployment rights
Best Regards
Satish Kumar

Am I able to use my iphone's wifi to have my desktop pc connect to our router with the usb chord?

Am I able to use my iphone's wifi to have my desktop pc connect to our router with the usb chord?

Subscribe to and enable the Personal Hotspot feature if your wireless provider offers it.

User cannot connect to backend system with user J2EE_ADMIN.

I am using Rapid Installer to initiate the second part of the installtion "ERP 6.0 EhP 3 Self-Service Scenarios and Automatic Roles". When I get to the J2EE User section to enter the parameters, the user is defaulted to "Administrator" and I enter my password. I click next and get this message "User cannot connect to backend system with user J2EE_ADMIN." Any ideas?

If this is a double stack installation, you need to enter J2EE_ADMIN as user, NOT administrator.
Markus

HT2534 Cannot connect to itunes store with my new iPad

Cannot connect to itunes store with my new iPad

Cannot connect to iTune Store
http://support.apple.com/kb/TS1368
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/

Replaced Airport Extreme router with Airport Time Capsule-now printer won't connect to network

I had no issues with connecting to the Airport Extreme. I have recently replaced the Extreme with an Airport Time Capsule (the new one that is 802.11 ac). All of my other products were able to detect the WIFI router and connected with no issue once I entered the password. However, the HP 2710 finds the WiFi router, allows me to select it but when I enter my password and click OK, it comes back after several minutes saying that it can't connect to the network. I checked the IP address and it's all 0.0.0.0 - it's won't establish an IP address either.

Hello @theros1093 , and welcome to the HP Forums, I hope you enjoy your experience!
I understand that you're having issues connecting to your router. I would like to help!
I'd recommend powering down your computer. Once it's powered down, go to the printer and select Setup , select Network, and select. Restore Network Defaults. Power down the printer. Once it's all shut down, unplug the router power for 60 seconds, and plug it back in. After it broadcasts, power on the printer and computer, and reconnect to the wireless network.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I have internet service on iMac but cannot get connection for Blu ray with airport express.

Why am I not getting internet connection for blu ray on tv with airport express?

Which exact model of the AirPort Express do you have?
Did the Blu Ray player connect wirelessly to the Express before or has it never been able to connect to it at all?

IMac Model 10,1 cannot connect to Internet, either with cable modem of Airport. Solutions?

iMac 10,1 cannot connect to internet via cable modem or Airport plugged into cable modem. MacBook Pro, iPad and iPod are fine. Reinstalled OS10.6.3with no results. Ideas on where to go next welcome.

Hello,
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).

IBook cannot connect to woreless router with airport card

Similar Messages

Maybe you are looking for