IBook charger LED is Orange but iBook is Not booting

The LED of the charger has an Orange light but the iBook is Not booting. Why?
iBook is from end of 2011. iBook worked Fine on friday and was not Used on the weekend!
Oh. And when I First Clip on the charger is is Green an After ~3 sec it turns Orange.

Hello,
First try resetting the PMU.
Follow this guide http://support.apple.com/kb/HT1431
Best of luck

Similar Messages

  • Power supply LED shows orange, but battery is not charging

    Hi everyone,
    My iBook G4 seemed to stop recharging the battery. Here is the info from the system profiler and coconutbattery (when the computer is plugged to power supply):
    Battery installed: Yes
    First low level warning: No
    Full charge capacity (mAh): 3924
    Remaining capacity (mAh): 1317
    Amperage (mA): 0
    Voltage (mV): 16637
    Cycle count: 56
    AC charger (watts): 50
    Connected: Yes
    Charging: No
    The puzzling part is that the LED ring on the power supply was orange, indicating it was recharging (more on this later), but the power status icon on the menu bar showed plugged (rather than the flashing thunderbolt icon indicating recharging) and saying "Calculating...." I have reset the power management module several times, but it did not resolve the problem. The battery seems still ok based on its charge cycle (only 56), though the capacity is only 89% of its original. The computer can still run totally fine as long as it is plugged to the power supply. It looks like the computer (power management unit?) simply decided to stop recharging, even though the battery is only 33% full. Any thought? BTW, does any one know the orange LED on the power supply will show up when it is recharging, or whenever it "senses" the battery is not fully charged?
    Many thanks in advance!

    Welcome to Apple Discussions!
    As Joshua mentions, the problem could be the power adaptor. Here's an article on troubleshooting it:
    http://support.apple.com/kb/TS1725
    For a battery to charge, three things have to work--the battery, the power adaptor, and the DC In Board, which is what contains the power port.
    Your battery sounds OK. If you can, find a known good power adaptor to try--maybe a friend's or one at the Apple Store.
    If both the adaptor and the battery are good, that leaves the DC In Board. What often happens is that the power port eventually becomes damaged from normal use and no longer makes good contact, often due to broken solder connections. If this is the case, the DC IN Board will need to be repaired or replaced.
    Also check that the battery contacts are good and not bent or damaged.
    Good luck!

  • I want to wipe iBook of it's content, but it will not boot up from DVD

    Can someone tell me how I clear off the content of iBook and install the basic set of the applications? I have the original OS 9 disks but they will not boot up with these. I have gradually upgraded the OS so I don't have disks to match 10.4.11.
    I want to give this away, as I bought new MacBook Pro recently and I have all of the files on the new computer, (and on another hard drive).
    Thank you for any help from out there.

    No problem; I usually answer good questions already solved. (It's for the search engine.) Here's how to wipe a corporate or government ATA hard drive.
    Should you be concerned about spies, industrial and foreign, or even you own personal information, there is a standard method of erasing ATA disks that contain government classified information. Most ATA disks have it built in (and is a concern when purchasing computers for classified research). It's extreme, but sometimes necessary: information otherwise remains stored on 'bad' blocks, &c.
    At one time, only the DOS program HDDerase activated the secure erase in ROM. For Mac users, the Linux program 'hdparm' (which has other uses) will do this from a Live Linux distribution on CD (unless you can boot a USB Flash Drive).'Darwin' might have it.
    How to Nuke an ATA Hard Drive
    http://ata.wiki.kernel.org/index.php/ATASecureErase
    Note that, if you stop the process part way though, the disk may not be usable again (except to spies). Also, nothing is guaranteed.
    If Darwin doesn't have it, or if it doesn't work, LiveCD distributions, such as Mint, Berry, & those of major distributions can be found here:
    Linux Release Watch
    http://distrowatch.com/

  • HT203167 I am trying to download songs onto my PC it gets to about 85% download then my computer crashes.  When I look in my account I have been charged for the items but it has not downloaded and there are no available downloads??

    I am trying to download songs onto my PC it gets to about 85% downloaded and then freezes I have to turn off and restart but then I have been charged for the item but it is not available in my downloads can anyone help?

    Welcome to the Apple Community.
    Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.

  • My I pod touch 5th one month old wont charge. Its on charger for 2 days but battery does not move from red sign?

    My I pod touch 5th one month old wont charge. Its on charger for 2 days but battery does not move from red sign?

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I got a hundred dollar charge your Apple ID but I can not use it

    I got a hundred dollar charge your Apple ID but I can not use it

    Do you mean that you've got an iTunes gift card, and if so why can't you use it ? All iTunes gift cards are country-specific, they can only be redeemed and used in their country of issue - if it's a US gift card then are you in the US with a US billing address on your account ? Or have you managed to redeem it but are having problems buying things ?

  • Ibook g3 not booting

    hi, I recently bought an ibook g3 off ebay that had a broken dc-in board. I installed a new one, as well as bought a new power supply. after this, the computer would charge the battery, but would not boot. Upon further inspection of the logic board, I found that the large capacitor by the battery and dc-in board connection on the logic board was bulged, and nearly all the caps and resistors around it were toast. I installed a new logic board, plugged in the charged battery, and yay! it works! so I start installing Ubuntu (guy didn't send the OS discs with the laptop) and the battery starts to get low so I decide to plug it in. I plugged the adapter into the power jack and poof! shuts off and won't turn back on. I start thinking I might have blown a fuse or something, until I realize that the power adapter wasn't even plugged into the wall. how could an unplugged adapter do that? anyways, now it won't charge the battery and I'm at wits end as to what to do. to recap:
    -New dc-in board
    -New power adapter
    -New Logic-board
    -Voltage is being measured across battery pins on logic board, but not charging battery.
    -Now no chime, led's, or fans
    -PMU and PRAM resets don't work
    I've heard by some that leaving it without power or battery for an extended period can fix this problem, so I'm draining all the caps to try and speed up the process, anyone else experienced this problem?

    Sounds as though you will have to (or have been already) be involved in
    even more troubleshooting to see what the weak part was, which failed
    when the machine acted up with the power adapter plugged into the iBook
    but not into the wall. Could be the DC-in board wasn't good.
    With my portable Apple computers, I usually plug the AC end of the adapter
    into a reliable wall port first (and use the long cord on the AC side of the
    adapter so it'll stay plugged into the wall, or a uninterruptable power supply)
    so as to not get a spark or surge to the computer from the adapter. Some
    of my adapters make a large spark when I plug them in, but work well. So
    that may have zero to do with your frankenstein rebuild, but I had to say it!
    Sometimes it is handy to have the original Mac disc set for a computer
    onhand since some Macs prefer to be running an Apple system prior to
    having some other OS installed; then you could have a partition on the
    HDD for the other system so you can use the Mac software to help
    troubleshoot the computer, and have a fully compatible system on it, too.
    Any OSX (probably draw the line at Panther 10.3.x) retail boot disc set
    will give you a startup volume on the hard drive; but with it not running
    at all now, you don't have that much of a disc set to attempt a boot from;
    so the OSX retail install disc #1 (boot volume) would be handy now.
    With your ability, is there a small computer shop nearby who could use
    your skills and pay you a bit better wage? I see wegenermedia has
    iBooks and other stuff on their sale pages; iBooks still hold some value.
    I think you are close to fixing it; but not knowing how it died the first time
    before you got it, could mean other small parts have fried. Good luck!

  • Ibook will not boot into OS or off disc

    I have a G3/500 ibook, it turns on and the display seems fine, but it won't boot into the OS on the HD or off a disc. I replaced the HD with one which i know works, still nothing, so i booted with volume select from a firewire dvd drive (the cd drive on the ibook is dead) it shows the HD and its name as well as the OSX disc or tech tool pro disc thats in the drive, but when i click on any of them, it restarts the volume select screen. Anyone know what my problem is or how to fix it? Thanks!

    You need to select the startup volume you want and then click on the straight arrow button (not the circular one). Clicking on the circular button searches for startup volumes again, and it sounds like that is what is happening.

  • Ibooks does not boot

    iBooks does not launch with my iMac updated with Marvericks.
    Alart window says "iBooks was terminated because of unknown reason".
    And there are so many informaiton in it, but I'm not sure what is going on and what is wrong with me.
    Does any body know that how to avoid it?
    Is it a kind of Bug of Marvericks?

    The 1.0.1 did nothing to resolve the issue of not conneting my MacBook to the iBooks folder - thought everything works on my iPad / iPhone.
    I got the same message by the Apple iWorks team but I resolved the issue for me temporarily by doing a "clean install" of Mavericks on a seperate HD.
    After that the Mavericks system works somehow ad advertised. Somehow.
    Thought pictures and docs had to be saved on a seperate medium and uploaded individually - same with pdf and off-Apple installed books - by dragging in iTunes from any iOs gear to the iBooks folder.
    Some glitches remain e.g. iMessage forgets all previously entered data.
    Actually I do not see a lot of argument to go throgh the hassle fearing I may have forgotton something through moving up to Mavericks.
    So I finally went back to SnowLeopard and dont look back on Mavericks since - until Apple manages seamlessly to move me over - as they have done in the years when Steve was at the helm of Apple...

  • Ibook will not boot

    My ibook G4 will not boot up it satops at a blank white screen... I've tried resetting the PMU by using the shift-ctrl-option-power and restarting but no luck. Any ideas??
    Thanks

    Hi, and welcome to Apple Discussions.
    If the iBook is on, shut it off.
    Push the power button, and as the startup chime is ending, hold down the x key. This should allow you to boot into OS X.
    If this doesn't work, check out these links to articles on recovering from the flashing question mark:
    http://docs.info.apple.com/article.html?artnum=58042
    http://www.bombich.com/mactips/openfirmware.html

  • Powerbook cord connected and orange but PB says not connected

    Help my PowerBook G4 1.67 is not reading the power supply cord. I tried replacing it with another power supply cord that I know works and still nothing. It all started this morning when I woke up to a dead powerbook. The orange light was on the power supply cord but my PB would not boot up. So I went to an alternate PB G4 and started testing the cords batteries, etc. Now my dead battery is charging on my other PB. I cannot figure out why my power cord is connected and orange but my PB says it is not connected. Please Help

    Hi again,
    The conditioning should of done it, if the battery life has not been had. You could try it again and see if it takes a bit better. My battery too was part of the recall, and it is still going, but I do condition it at the 6 month level now instead of letting it go till it shows signs of needing it.
    When you see 64% on the computer, how many lights come on when you push the little button on the battery? (can be done live, on the bottom of the computer). Each light is about 20%. If they match, you are in calibration, if not, condition it again... and maybe give it a bit more time to charge. Or until all the lights are on on the battery. At that time, it should show 100% (or close) on the computer.
    Remember, in the charging process, if you are using the computer medium heavy, the charger will just keep up to the drain of the use and not gain much on percentage, also, the higher the percentage the slower the charger progresses with the remainder.
    The main thing is to have the battery lights and the computer % in-sync, so they are both on the same page... and conditioning does that. Or should do that when done fully down and fully back up again.
    Good Luck, Enjoy

  • IBook will not boot from CD

    Disk utility has found problems. Specifically it returned this info:
    Verifying volume “Macintosh HD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Invalid node structure
    The volume Macintosh HD needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    I have tried to restart the iBook using the original restore CD, the original install CD, the Leopard CD, the Tiger CD and Norton Utilities CD. The computer will read the discs but will not boot from them so I can't find a way to repair the effected volume.
    Tried Parameter Ram but feel there are deeper problems; just don't know how to get to them.

    knateb, Welcome to the discussion area!
    Just for the record, your iBook shipped with a version of OS X somewhere between OS 10.4.2 and OS 10.4.4. Therefore it will never boot from a retail Tiger (10.4) disc.
    Have you tried resetting the PRAM?
    Have you tried resetting the open firmware? The procedure is
    Start up into Open Firmware by pressing and holding the Command-Option-O-F key combination during startup.
    At the Open Firmware prompt, type: reset-nvram
    Press Return.
    At the Open Firmware prompt, type: reset-all
    Press Return.

  • IBook G3 not booting properly

    My iBook G3 will not boot up anymore. It just started today. Everything including the finder froze up, and I had to hold down the power button to turn it off. I went to turn it back on, and I got a folder with a flashing mac face and a question mark on it. I have been told this only happens in OS 9, but I am (was) running 10.4.11. All it does is boot to that screen, and I can't boot from the disc, because I don't have it. Any help would be appreciated. Thanks.

    Hi, and welcome to Apple Discussions.
    What happens if you try holding down the x key during startup? (This will sometimes do a force-boot into OS X.)
    Have you tried resetting the PRAM?
    If that doesn't work, will it start up in Safe Mode? (This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk, so let it attempt the Safe Boot for a long time.)

  • HT1657 Where do I go if I rented a movie, thought it finished downloading, was charged for the rental but it's not showing up under videos?

    I rented a movie, was charged but it's not showing up under videos. How can I resolve this problem?

    Hi Garywilliamsnc!
    Try looking for this purchase and re-downloading it from your past purchases, found here:
    Download past purchases
    http://support.apple.com/kb/ht2519
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Ibook will not boot PLEASE HELP!!!!

    Hi,
    First the ibook booted then would come up with the kernel error: square box with "you need to restart your computer. Hold down the power button for several seconds or press the restart button......
    I then booted to single user mode and ran fsck -y which eventually came up with the all clear "The volume Macintosh HD appears to be OK"
    I then restarted the system which booted to the blue screen with some quirky graphics towards the top. It will now not boot into single user mode, just black screen or multi-coloured stripy screen. When booting from the CD drive the sceen is just blue or black.
    Okay, I have connected the ibook via fire wire to a powerbook, and re-booted the ibook in terminal mode which brings up the fire wire connect symbol on screen.
    After a while the system stalls showing part of the symbol and the connection is frozen. I have tried to re-install tiger using the powerbook to initiate as the ibook will not. However, it freezes at 50% of install.
    I changed the ram to iliminate a ram failure, however... still the same.
    While I was in terminal mode I erased the disk using the disk utility from the PB and then ran the install again... still froze.
    This looks more serious than I thought. I'm now thinking that it could be the hard drive or worse. I have tried to use the apple support phone # and it does not seem to work, 1800 275 2273.
    I'm having some real bad luck here. Any ideas?

    I ran the apple hard ware test disc. The quick test found no errors. The extended test freezes up completely. Now I'm really stumed. The logic board came up with know errors.
    When the system froze on the extended test. I falsed a re-boot. However the screen went black so I could not run the test again. It seems like a time thing... the ibook can only run for a short period before it freezes. Then it has to shut down for a while before it can run again

Maybe you are looking for

  • Not holding connection to server

    Hi, When I try to upload/update my website I get this message: -Dreamweaver cannot determine the remote server time. The Select Newer and Synchronize commands will not be available.- I click OK and I get this message: -An FTP error occurred - cannot

  • System wide freezes becoming too frequent

    If anyone has some insight about where I could track down what might be causing my entire system to freeze would be highly appreciated! The issue doesn't seem to be application specific, and I've run hardware tests and all the other standard maintena

  • [ms-1719/gx700] - windows 7 64bit - mass storage controller driver missing

    Hi, I have a question about finding/installing the mass storage controller driver, after a clean install of win7 sp1 64bit (home edition). I bought a new drive (Seagate ST9500420AS), onto which I installed the OS. I thought the OS itself was supposed

  • Reference contract within Sales order supplied by ORDERS05 IDOC

    I am creating Distributed sales orders using IDOC of type ORDERS05. The orders are being raised okay upto now, but now I want to perform various checks against a reference contract should one be added to the IDOC. The IDOC segment E1EDK02 with a qual

  • Use methods in other classes

    Can I use methods from other classes than the class that myClass extends? ex. myClass extends parentClass{ myMethod() myMethod() is declared in i third class. Is this possible or can I only use classes from the parent class? -Thanks-