Ibook does not read epub.

Hi,
iBooks does not read epub. epub book is marked as 'book', not 'DRM. Error message 'Book format error. this book cannot be opened because the format is not recognized, or is invalid.
pls help me read my epubs on ipad2
wouter

Ask the people you bought them from.  I don't know whether it's possible on an iPad, maybe only on a Mac.  Read their
Veelgestelde vragen over digitale boeken/Welke apparaten zijn geschikt voor de digitale boeken van bol.com?

Similar Messages

  • IBook does not run on battery

    My Ibook does not run on battery when it reaches 48%. It just shutsdown with no warnings. I have to connect the AC adapter to work if i disconnect it the ibook just shuts down. I have to waut until it reaches 100% and then i take the AC adapter. I book shuts down and after i turn it on with out the AC and it stays running on bat until the 48%. Then i have to go through everything again.

    Jobbaman wrote:
    Till now my battery has been working perfectly. The machine is about 1 year old and I use it heavily for my work. I prefer to unplug my battery when it's full, and use it till it go's to sleep before plugging it in again. This results in a very high Cycle count (453) but a still perfectly working battery (98% according to CoconutBattery), I can use the machine for about 4 hours on a full battery.
    The amperage would be 0 since your battery is not in a charge cycle.
    Part of your problem could honestly be your cycle count and method of caring for your battery. If you check some of the research about Li_ion batteries this is the worse way to use it. Li-Ion batteries work best with little charges. Deep cycling Li-Ion can kill the cells. There is no good reason to charge the battery and then use it as you have been doing. This just kills your battery for no reason. The MacBook is designed to cut the charge off when the battery is full and it does not hurt the battery to lie idle like this. The method you're using can prematurely kill your battery.
    Either the battery has a problem that is not showing on you readings or the battery circuit is fried. Do you know someone that has a MacBook or live near an Apple store so you can test your battery on a known good MacBook. Or you could try one of their batteries in it.

  • Ibooks does not boot

    iBooks does not launch with my iMac updated with Marvericks.
    Alart window says "iBooks was terminated because of unknown reason".
    And there are so many informaiton in it, but I'm not sure what is going on and what is wrong with me.
    Does any body know that how to avoid it?
    Is it a kind of Bug of Marvericks?

    The 1.0.1 did nothing to resolve the issue of not conneting my MacBook to the iBooks folder - thought everything works on my iPad / iPhone.
    I got the same message by the Apple iWorks team but I resolved the issue for me temporarily by doing a "clean install" of Mavericks on a seperate HD.
    After that the Mavericks system works somehow ad advertised. Somehow.
    Thought pictures and docs had to be saved on a seperate medium and uploaded individually - same with pdf and off-Apple installed books - by dragging in iTunes from any iOs gear to the iBooks folder.
    Some glitches remain e.g. iMessage forgets all previously entered data.
    Actually I do not see a lot of argument to go throgh the hassle fearing I may have forgotton something through moving up to Mavericks.
    So I finally went back to SnowLeopard and dont look back on Mavericks since - until Apple manages seamlessly to move me over - as they have done in the years when Steve was at the helm of Apple...

  • I have a brandnew 7th gen classic ipad, it does not read in my itunes anymore. i bought it cause apple was suppose to be good, now i am lost as i just want my music, any help. tried the rec. steps to fix it and nothing

    let em elaborate more, the unit is less than 5months old, i bought it just for music, i use to have a lot of cds, well it does not read anynore in my computer nor the itunes programe, i reset it, i put it to disk mode, i down loaded the newest itunes program, i want to know how to fix this as i paid apple good money for a product that died after 5months, for real.
    this is bad business and i need some help

    Does the iPod work okay otherwise apart from not being able to connect with and communicate with iTunes?
    Have you tried connecting the iPod to another PC or Mac running iTunes to see if it is properly recognized there?
    Is iTunes up to date on your PC?  Does it appear in Device Manager when you plug it in? To access Device Manager, click start, right->click on Computer (or My Computer in Windows XP) and choose Manage.  When the window opens, select Device Manager in the left hand pane if necessary.
    Any unknown devices listed or does the iPod appear anywhere under USB Host Controllers?
    B-rock

  • The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

    The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

    Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
    To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
    If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
    The following might work, but you will not know until you try.
    Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
    Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
    The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
    (What is the difference in the 2 -- one is about twice the price of the other…)
    http://www.apple.com/wifi/

  • My iPod Classic (  iTunes 10.7.0.21) does not read Thai characters. How can I fix this? Thank you.

    Hello all,
    I have dowloaded songs from a Thai band, but my iPod does not read characters and I just have a blank stripe.
    How can I fix this?
    Thank you in advance.

    Thai is not one of the supported languages.
    http://www.apple.com/ipodclassic/specs.html
    Languages
    Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish
    Additional language support for display of song, album, and artist information: Bulgarian, Croatian, Romanian, Serbian, Slovak, Slovenian, Ukrainian, and Vietnamese
    B-rock

  • I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

    I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

    Thanks,
    Yes, I did that. They have uppgrades for the dongles, but just untill Mac Os 10.7. Their solution is to buy a new modem from them or getting one for free if I sign a contract for 24 months! So, i think from that side not very helpful.
    It is just that I do not want to buy a new modem, when it works in quite recent computers and after having spent money in the new Mac.
    But thank you for your reply!

  • CD/DVD drive does not read all DVD formats and regions

    Hi
    My Teac-dw-224e-a does not read all DVDs formats and regions.
    It does read CDs but no DVDs at all.
    Not DVD-R and not even regular DVDs. I have checked the region of the DVD.
    I have reinstalled the driver and also tried with different software.
    What can I do?
    Please help!

    Hi
    It is possible that your DVD drive has wrong region settings.
    In this case it is not able to watch all possible DVD movies from different regions.
    Of course you can change the settings 4 times. But after this changing the settings are fixed and its not possible to change it anymore.

  • Tecra M5: DVD drive does not read these mini DVDs

    I have canon dvd handycam, and mini dvd works on it. One month back i recorded movie and pictures on mini dvd using handycam and ran mini dvd on my tecra M5 dvd drive, it worked very fine.
    Now after 1 month i have 5 mini dvds with movies and pictures which i took on 1 month vacation in diffierent countries, i tried my best but tecra dvd drive does not read these mini dvd, cd drive label appears instead dvd drive when i put mini dvd in it.
    All other standard size dvds, cds working fine on it.Its complicated and as well as irritating.
    Any suggestions?
    Why its messedup?

    Seems the lens cannot read this miniDVDs. Possibly the drive lens cannot calibrate and therefore the miniDVDs are nonreadable.
    Try the solution from sascha. Maybe youre a lucky man and it works.
    If not, try to remove the drive physically from the notebook. Reboot the notebook without the drive. The Windows and BIOS shouldnt recognize the drive.
    Then shuts down again, put the drive into the notebook and boot up the unit.
    The notebook should recognize the drive and should indicate the firmware again.
    Im not sure if this will help you but its attemptable

  • My external Iomega DVD drive does not read DVDs. Why?

    My external Iomega DVD drive does not read DVDs. Why?

    what does this question have to do with a mac?  post in the Iomega fourms.

  • Dvd drive does not read dvd but reads cd only.

    my hp compaq 420 core2 duo dvd drive does not read the dvds but only reads the cds. How can i solve this problem, please help me with the correct answer.
    This question was solved.
    View Solution.

    It will likely require replacement of the drive. There is more than one laser in there: one for each function. One can go bad without the other going bad.
    608141-001
    Above is the part number for the DVD burner drive. I could not find one on eBay.  Here is one online:
    http://www.mydvddrives.com/replacement-for-hp-compaq-608141-001-sata-cd-dvdrw-dvd-ram-drive-burner-l...
    Replacement is easy. Remove a single screw on the bottom and slide the old drive out and replace with the new drive.

  • Dvd drive does not read dvds

    my laptop does not read dvd disks but its able to read some cd disks.
    what should i do

    Are there any discs that it can read?
    Try looking at this article.
    What can I do if my CD or DVD drive doesn't work properly?
    - Peter

  • I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5

    I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3.  I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have.  I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version.  What should I do

    I have 6.0.  Tried to download newest verion and it will not download.  Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
    Thanks, John
    m: gener7 
    Sent: Thursday, December 11, 2014 6:01 PM
    To: JOHN STAHLY
    Subject:  I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    created by gener7 <https://forums.adobe.com/people/gener7>  in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

  • HT2801 Hello ..im currently using iMAC snowleopard 10.6.8 3.06 GHZ INTEL core i3 4GB 1333MHz DDR3......my problem is that my mac accepts cds and dvds...but the icon does not appear in the finder and desktop either.....more over it does not read any cd or

    hello im currently using....iMAC snowleopard 10.6.8
    3.06 GHz intel i3

    i need some help please....my mac acceppts cds and dvds... my drive is located at the right of the screen.....but no icon appears in desktop and finder......also...it does not read....any cd....does not read any dvd either.....it ejects the cds after a while on its own....also it does not burn any cd.....wen i tried....errors with 0x06 ....medium errors,....show up.....also...i tried reinstalling the mac os.....but when i restart the pc...and...keep C key pressed...the cd just gets ejected.....can someone please help me with this problem?????? i contacted APPLE too.. but they said it must be a software problem......also no apple macbookair superdrive does not get connected to the mac either.....PLEASE HELP!!!!

  • After takimg the picture of my document and scanning into the adobe PDF it does not read clearly words are meshed together

    after taking a picture of my document and scanning into the adobe PDF
    it does not read clearly.  words are meshed together

    Hi melisaf76024648,
    Can you please tell me what process you're using to create the PDF? Are you scanning directly from the scanner into Acrobat? Or, are you scanning the document, and then using Adobe PDF Pack to convert the scanned image to PDF? Or, some other method?
    Please walk me through how you're creating the PDF, and we will have a better idea where things went awry.
    Best,
    Sara

Maybe you are looking for

  • Disable Vertical scroll but enable Page down in Table control for BDC

    Hello All In my 4.6C sysem , i had enabled Scroll bar in table control by  populating TABC-lines = <No of records>...Then when i try to capture the BDC recording of this , then the scrolling event is not captured in BDC , as we all know..... So i put

  • Base UOM translation in query

    Hi, if i check some data on R/3 tables i can see Base UOM = "EA", but when i see it on a transaction it is translated to "C/U" according to my logon language. On the infocube the same data loaded appears as "EA", the question is is it going to be tra

  • Since 2 days can't send emails via Apple Mail

    Hi, for 2 days now I'm unable to send emails from Apple Mail. I have an Hotmail account (using POP3) and a WEB.DE account (using IMAP) connected with Mail. Every time I try to send an email Mail tells me the SMTP server are offline. My mobile.me acco

  • Using MacOSX how to set up Plug-in 1.3 (I am desperate)

    Good Day, I think it is possible to set up and use (I downloaded it) j2re-1_3_1_03-linux-i386-rpm.bi on Mac OSX but I have no idea how to. Can someone direct me, PLEASE! Struggling, ~arthur

  • DVD made with iDVD not playing in DVD players

    I have a iMac G5 and iDVD 4. I use FCP to edit. I have made many DVDs from exporting my sequences to quicktime. Then I import that export into iDVD, and this has always been fine. For some reason, my latest project will only play on my computer using