IBook G3 (800Mhz, 32 VRAM) won't boot... at all.

I got an old iBook G3 (800Mhz, 32 VRAM) from a friend, which he hadn't used for years (literally). It didn't even have a HDD, so I bought a new one and placedit in.
I connected the power adapter, and booted normally. Everything fine, it booted, and gave me this blinking question mark. I inserted the Tiger install DVD, and it started installing. Half way through, it gave me a disc read error (the disc was dirty and therefore unreadable. No problem related to the computer). I also got a message saying that I needed to restart. For some reason I figured that holding the power button for a few seconds would force it to shut down, which it did.
But after that it wouldn't boot anymore. I press the power button and NOTHING happens. No beep, no noise, not the slightest sign of life,... nothing.
I tried to reset the PMU, and nothing either.
http://support.apple.com/kb/HT1431?viewlocale=en_US#faq6
(Although, it says the "power button on the keyboard". If they mean the actual keyboard, then I probably did this wrong, as I'm not aware of a power button on the keyboard).
I did also read this:
http://support.apple.com/kb/TA25686?viewlocale=en_US
But it wasn't of any useful help either. Still the same problem.
Another thing I noticed is that there's a flashing light on the battery, but I assume it just means the battery is not charged? (It wouldn't boot or do anything if I removed the battery either, by the way).
Now I ran out of ideas. Any help?
Thanks a lot!

Try removing the battery entirely and see if it will boot.
It could be a bad power input (DC-in) board. Sometimes when the DC-board quits working, the iBook will only start up from a working and charged battery. In this case, the adapter doesn't work. It won't charge the battery, nor will it power the iBook.
This happened to my husband's iBook, and we swapped batteries periodically, allowing my iBook to charge both batteries, until he could get the DC-in board replaced.

Similar Messages

  • HP laptop won't boot at all

    My one and half year old Hp 2000 laptop won't boot at all. When I press the power button, it doesn't show any sign of life at all.
    I have tried Hard test several times yet it didn't fix it.
    Battery charges, power adapter working.
    I have also tried to boot using the AC adapter alone yet my precious laptop isn't showing any sign of life.
    Please how do I fix this? I need to do my assignment and prepare for my exams, and I can't afford a new laptop. Not when the current laptop is pretty new.
    Please help me HP support.
    Thank you in advance.

    Hi @Chichiiii ,
    Thank You for your inquiry.
    I understand that when you power on your notebook it is unresponsive.  You did state that the AC adapter is working and the battery is charging.
    Here is a link to HP Notebook PCs - Computer Does Not Start (Windows 8), which has multiple links to help you determine the issue.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Won't boot at all... [will not POST]

    Greets. My order from newegg just came in today and i'm quite happy with the "big" things i got-
    AMD Athlon 64 3500+ (link)
    MSI K8N Neo4-F (link)
    Now, I'm not totally oblivious with the whole computer situation, after all, I was brave enough to build this, right? 8) The problem I am having lies in the fact that the computer just won't boot at all. Eventually I turned on that D-Bracket into JDB1. So far it has got Yellow and Red LEDs which stay on. The book tells me that the processor is installed incorrectly. I'm pretty sure it's lying as I have checked it many times (please don't make me take off that heatsink/fan again) and the chip is FIRMLY set in it's place. Alas, the screen stays black (running off of a sapphire card) and nothing happens. I would expect to AT LEAST get a BIOS screen to see where I messed up my SATA configuration (as I'm sure I did...)
    But, if anyone has seen a problem like this or knows a solution, please give me a shout. It is very much appreciated
    edit: after lurking more (link) I have decided that i'm not at fault, it is, indeed, the graphics card and/or monitor that are not working. I get:
    which, according to this post, means that I should be in the clear for BIOS set up. Nothing is displayed on my screen! :( Help!
    Thanks.
    Sean

    Quote from: Supershanks on 12-May-05, 08:28:54
    1) Do u have any usb cables from your case front panel or Flash card/drive or usb hubs connected to the mobo if so unplug them.
    2) Switch off computer & unplug mains lead the remove a module of memory leaving the remaining 1 in slot1 (nearest CPU)
    if 1 doesn't apply or doesn't give any change try 2.
    1 does not apply, the only external devices i have attached are a monitor, keyboard, mouse (all os/2, not usb) and of course our friendly D-Bracket.
    I have unplugged all IDE devices and SATA devices. All that's in there is the 1 GB of RAM (it's a 1gb stick, not 512mb), graphics card and processor, still no picture :(

  • My Probook 4310s won't boot at all

    Hi there
    My probook 4310s energy star suddenly stop working and won't boot at all. Prior to this, the windows freeze couple of times and I had to power off by pressing the power button for few seconds. And this happened few times in a week (not every time I used it)
    Now, when I turn it on, the laptop just show the very first splash screen, the one with the logo of 'hp invent', 'intel' and 'press the ESC key for startup Menu'. But pressing any key wont do nothing.
    These are what I have tried so far.
    - I tried pressing ESC, F11, F12, F10 and all of the F keys but nothing happened
    - I even tried to take off the Harddrive and memory card to see if the drive or memory were faulty but it stayed the same.
    - with the hd and memory back in, I tried putting in the installation dvd in the hope that the laptop will boot from it, but nothing happened.
    - for several times, I let it on overnight and in the morning the screen shows the recovery menu, startup repair, etc. but choosing any option do not do anything and pressing cancel would bring me back to the original faulty state.
    - When it show the startup repair menu, I could go to prompt screen and browse the hd content and every files seems to be fine apart from my c drive is now recognized as d drive.
    can anyone tell me what is wrong and how to fix it? thank you very much.
    It's running on windows 7 home premium 64 bit.

    Hello italo_brenner,
    In order to get the best and most accurate response for your question, please submit your question onto the HP commercial forums. You have posted on the consumer forum, and you're using a commercial based system. The link below will allow you to submit your question. It is possible that you might have to create another profile.
    Commercial Forum
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

    Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

    It looks like ocz is aware of the issue and trying to address it via firmware:
    http://www.ocztechnologyforum.com/forum/showthread.php?103700-Mountain-Lion-and- OCZ-Octane-Petrol-and-Octane-S2-SSD-s
    It's a shame because apple is clearly the party that changed something.

  • PT880 Neo - Won't Boot at all

    Help me anyone!
    My computer won't boot at all. I recently put it together and the bios works all the way to the Boot-start (accordingly to D-bracket) but nothing happends after that. The bios recognices the SATA, floppy, DVD and the CDrom (all at once or one by one - standalone). I'am trying to install Windows XP Prof sp1a.
    - I've tried with full system (SATA, DVD, CDrom and Floppy).
    - I've tried with only the DVD (disabled SATA).
    - I've tried with only the CDrom (disabled SATA).
    - I've even tried with only the floppy (windows 98 start floppy).
    - I've tried two different Win XP prof disc's.
    - I've tried with or without PATA-IDE and SATA and all the possible
       combination of them.
    Since the computer won't read from the DVD, CDrom or the floppy I can't
    flash the bios or install the RAID-driver from the floppy. After reading about the +12 Amp in this forum I changed PSU to Aspire but it didn't help. I really need help from you all because I'm so tired of trying now and I GOT THREE SIMILAR COMPUTERS ACTING THIS WAY ON MY KITCHENTABLE right now (for me and for two friends). I can't bellieve I was so unlucky as to receive 3 MoBo's that won't work so It has to be something else. One strange thing though - The press F11 for BOOT meny (boot order) doesn't work at all - otherwise the Bios seems to work as it should.
    Best regards
    Lars

    I've got the same problem with a P4 3.2E.  At times I get into "Windows loading" before rebooting, other times it freezes at a black screen just past POST (with a blinking cursor in upper left-hand corner).  One time I actually got to desktop and just as icons were appearing, it rebooted.  It really seems memory related to me.  Running PC4200, I set all timings as loose as possible, make sure there was enough voltage going everywhere, but still no success.  I'm going to try swapping in my 2.8C northy to flash to BIOS 1.4, and I PM'ed NovJoe for that beta...hoping he'll be kind enough to shoot it to me.  This is just a backup board while I prepare my IC7 for thermo electric cooling, and while I am impressed with all the options and voltage ranges in BIOS (from an extreme OC'ing standpoint), I'm not too impressed with this supposedly "Prescott Ready" board so far.  Hoping I can get this thing solved tonight, cuz I lost out on a night of gaming last night.

  • Help! blue screen of death and ibook won't boot at all

    I ran the software update on my ibook (800 mhz, G3 running 10.4.3) today. I repaired permissions and rebooted before hand. I don't have any hacks on it. I have plently of room on the drive for the update (more than 6gigs on the 30 gig drive). I know my ibook is feeling its age, but now she won't start at all!
    When I ran the update (which I already did on my imac with no problems), the ipod updater, quicktime and something else installed without problem. I came into the room to find that the Mac OS 10.4.4 updater had a red exclimation point next to it, and I had an error message that there was a problem with the update and that I needed to reboot. Restarting was my only option so I did. ibook would not start. It hung on the "starting OS X" screen forever (45 minutes). I force-restarted and booted in single-user mode. I have an app called AppleJack installed so I ran that (repairs permissions and such in single-user mode). I rebooted. Nothing. Blue screen of death.
    Any ideas? Should I reinstall OS 10.4 from the CD?

    How is mail different than that?
    Mail keeps mailboxes in their own separate Finder files.
    Home -> Library -> Mail
    Home -> Library -> Mail Downloads
    Notice also that Mailboxes themselves have their own folders in
    Home -> Library -> Mail -> Mailboxes
    Addressbook keeps addresses for Mail in its own set of Finder Files.
    Home -> Library -> Application Support -> Addressbook
    iCal keeps it in
    Home -> Library -> Calendars
    Whereas Microsoft Office is simply everything in one user belongs to:
    Home -> Documents -> Microsoft User Data -> Identities -> Main Identity -> Database
    So in reality you have 4 different places, and simple data corruption inside the database file itself is not going to take out all of the data when you use Mail, Addressbook, and iCal. I find it is much more robust to use Mail, Addressbook, and iCal purely for the reason that data corruption is not as prevalent a problem when your database gets large.
    Single user mode is not a good idea, until the data is actually backed up in some fashion. Once you are getting input/output errors, trying to get it out of a place where there is data corruption by using a data recovery program is the first step with Prosoft Data Rescue.
    You may try to rebuild the database file too, which might work, but since your machine is suffering a lot of input/output errors, I'm suspicious of the health of your hard drive, and you are booting to a blue screen, single user mode may not be enough, even Disk Warrior may not be enough. Now's the time to get all the data off the hard drive into another in a safe place. Data Rescue may be able to recover it. If not, you may have to deal with a data recovery firm.

  • IBook on 10.4 won't boot from Install Disk

    Hi - Somewhere along the line I lost DiskUtility from my iBook running 10.4.11. I thought I could run it from the Install Disc but I find the iBook won't boot from the Disc and DU won't run from the Disc (when I do manage to track it down there).
    I have install discs from a G4 Powerbook and a MacBookPro Unibody but I'm concerned about repairing permissions from the wrong version of DU (even if I could get the iBook to boot from those discs). Is a newer disc OK? I want to run or install DiskUtility. What are my options??
    How can I get the iBook to boot from its install disc?
    TIA your expertise...
    j2

    The installers are machine-series specific. And the Intel disc won't work
    in the PPC Mac, additionally. If you have the correct disc for that iBook,
    then you can boot the computer with the disc inside the optical drive
    and hold the C key down, until Installer appears on the screen; a second
    screen after the initial language screen has a full menu bar and Installer
    in the header; options appear in the drop-down menu lists, Disk Utility is
    among utility and other features listed in there.
    If you do not have an iBook G4 disc or an OS X disc retail version capable
    of doing the job, you really should get the correct disc. In a few instances,
    another path may work, but is not recommended. And you could lose the
    content of the hard drive in the computer you are hoping to save.
    However, you may be able to use Pacifist to get Disk Utility from the PB G4
    installer disc to be made available on the desktop of the iBook, and use
    Pacifist to install that extracted package item from the other PPC install disc.
    This does not use the installers on the disc media, so Pacifist is used to do
    the process. The iBook ideally needs a replacement disc set, and that may
    be available from Apple online store's sales support (see online phone#)
    and the product would be matched by serial number. A fee is involved.
    The original software disc set would have the correct Apple Hardware Test
    and the software kit as included when the computer was new.
    If Tiger did not ship with the computer in question, then a full retail disc 10.4
    installer could probably be used; since it would be newer than, say 10.3.9.
    In natural progression, the newer disc of correct kind & type supported by
    the computer is a possible path; however a Leopard disc won't help fix Tiger.
    You could also use Disk Utility in one PPC Mac, via FireWire Target Disk
    mode, to repair the drive of the iBook. It would only appear as a hard drive.
    So, repairing disk permissions would not be possible, on a non-boot volume.
    This, only within limits; differences in build versions of OS and custom installs
    done to a computer configuration may make doing so very limited. I would
    not expect an Intel-Mac's version of the same OS to help a PPC in any way.
    Good luck & happy computing!
    { edited 2x }

  • IBook G3 366mhz graphite WON'T BOOT!!!!

    I Could Really Use Some HELP with my iBook! I use my iBook for school so I really need to fix it as soon as possible. I was sitting on my iBook and had just finished saving my English Essay and I was going to shut down but I thought I would check to see if there was any updates available for my iBook which there was, so I updated it then stated that I needed to restart so I did, but when it tryed to restart its self after its update. but it wouldn't/couldn't boot past a grey screen with a apple in the middle of the screen and and circle wheeel like loading bar just underneath the apple.

    Hello MissVicky and Welcome to Apple Discussions, 
    Try working through this article:
    Mac won't boot in OS X (10.3.9 and earlier). It's quite lengthy so I'd recommend printing it and using it as a checklist.
    let us know how you get on.
    mrtotes

  • PowerMac DP G4 Won't Boot With All RAM Sticks Installed

    A few weeks ago, my 800 MHz dual-processor G4 started having frequent kernel panics. I tried all sorts of things, including changing the PRAM battery, resetting the firmware, and resetting the PMU. Then, one day, it would only power up but not boot, so I took it in for repairs.
    The shop I took it to determined that the logic board was malfunctioning and replaced it. The computer no longer has any kernel panics.
    The machine was designed for three 500 MB RAM sticks, which is what it had ever since I bought it over five years ago. Now, apparently, it won't boot with the last one installed, though it will with two. The shop replaced the new logic board and and even swapped RAM, but the problem still persists. Neither the power supply nor the hard drive appear to be malfunctioning.
    Does anyone have any ideas what's going on? Any ideas or advice would be greatly appreciated.
    Thank you.
    G4 800 MHz Dual Processor   Mac OS X (10.4.9)  

    squeakmaster, welcome to Apple Discussions.
    Have you tried the following with one 512MB RAM stick:
    1. Palce it in the first RAM slot. Does the Mac boot?
    2. If so, remove the stick & place it in the second RAM slot. Does it boot?
    3. If so, remove the stick & place it in the third RAM slot. Does it boot?
    The results of this test should reveal (1) if the stick boots in one or more RAM slots, the RAM is good and (2) if it fails to boot in a RAM slot, there is a problem with that slot.
    Do this with each of the tree RAM sticks & post back the results.
    When the logic board was replaced, was the firmware updated to be compliant with OS X. (Note - The firmware is installed on a chip on the logic board.) Check your Mac's firmware (Boot ROM version) version. Mac OS X: Available firmware updates
    http://docs.info.apple.com/article.html?artnum=86117 If an update is required, the update must be installed (using OS 9) BEFORE you install OS X.
    Can you boot up in OS 9.x? If so you can use DIMM First Aid - Check & recover disabled (missing) RAM from Apple's latest firmware updates http://www.versiontracker.com/dyn/moreinfo/macos/10415
     Cheers, Tom

  • Neo-LSR won't boot at all

    Hi,
    my 2.60C + Neo-LSr + 2 256MB Samsung PC3200 combo doesn't seem to like to work with each other. The fans and chipset light show work fine and the D-Bracket shows 4 green lights, but the screen remains black. It doesn't matter if I use 1 or 2 sticks of memory, it just won't boot.
    Is there any general Problem with Samsung RAM  and this motherboard ?  Any way I can solve this problem ?
    Thx in advance,
    yoshi
     

    Only way I read here so far was to look for one PC2100 stick,go into bios and set vdimm value a bit up,most PC3200 worked than.
    I have Samsung Ram,working fine,but only PC2100,so no compare.

  • Imac G3 had clean install OS 10.1; can't install 9.2; now won't boot at all

    Hello,
    I was given an older imac G3--has 176 mg ram; 6 gb hard drive. Due to its small memory and the fact my daughter just wanted it for games, I decided to only install OS 10.1, instead of OS 9.2.2 and OS 10.1.5 which I have on my G4.
    Then, I found that most of my CD games (no internet access) need Classic to run. So, upon inserting my OS 9.1 disk to install that, I got the message that the firmware needed to be updated; then an error saying I needed installer 4.5.5.
    Two questions:
    1. How do I get around the fact that my firmware needs to be updated but when I boot from a locked disk, I get the error message that firmware updates can't take place due to locked disk.
    2. Now, I can't get it to boot at all into OS X or any disk in the CD drive--I get a screen with a little script that says, "failed to boot, etc., Apple Firmware 3.0 3f built 12/__98
    then (not exact text)
    0 >boot MAC-PARTS: specified partition invalid, etc.
    can't open ide1, etc.
    I hooked it up to my other G3 imac and my G4 via ethernet cable but since there's no system accessible, I can't turn on file sharing/Apple talk, etc.
    Hoping I'm not the only night owl going round and round with these kind of problems. Any help would be much appreciated.
    Valerie in Seattle

    If you don't mind wiping the hard drive, boot from the 10.1 installer disk and install the 9 drivers:
    http://docs.info.apple.com/article.html?artnum=75275
    Then find out what CD came with the Mac by first identifying it:
    http://docs.info.apple.com/article.html?artnum=58669
    And then looking at this article:
    http://docs.info.apple.com/article.html?artnum=25517
    If it came with 9, get the original CD that came with it to install Mac OS 9.
    If it came with Mac OS 8.6 or earlier, get a retail 9 CD which looks like
    Do a clean install using
    http://docs.info.apple.com/article.html?artnum=58176 as a guide once you have the correct 9 disk.
    Then install the firmware update that corresponds to your Mac:
    http://docs.info.apple.com/article.html?artnum=86117
    And then I would not even bother with 10.1.5 anymore and get 10.2. Repairing issues with 10.1.5 is difficult. 10.2 installer disks which work on that machine once the firmware is updated look like

  • MacBook Won't Boot Up All The Way

    Hi, I have had my macbook for quite a while, and it has had problems before like a non working battery and random brightness changes but ever since I installed the latest security update it will not boot up all the way, first it takes a long time for it to pass the white screen with the Apple logo and loading circle, after that it reaches a blue screen, with no response. Once it made it to my desktop background but none of the icons or dock showed up. Any help?

    I have the same problem mentioned in the original message. I downloaded the updates and my computer will no longer boot up. I put in Disk one of the install disc, but that did nothing and now I can't get the disk to eject. I was going to try disk 2, but can't get disk 1 out.

  • Mac won't boot at all

    My macbook has been working fine for weeks(after my harddrive crashed late january) but today it shut down, and now will not boot at all. It worked 5 minutes earlier and I did nothing different that would have messed it up. When I press the power button the screen flashes but that is all. I tried booting with and without the battery(although it is a brand new battery as of january and I don't think thats the issue). any ideas? or is it toast?

    Have you tried resetting the SMC as described in [this Apple kbase article|http://support.apple.com/kb/HT1411]?
    If that does not work, I would say that you have a hardware failure. Contact Apple (800-275-2273 in the USA) to set up a repair or carry in to an Apple retail store. Be sure to [make an appointment|http://www.apple.com/retail] first or you may wait a long time to talk to someone.

  • IMac won't boot at all

    Okay, so my friend bought an Imac from someone and got no disks with it. I know nothing about Macs but am trying to help her.
    It wont boot at all, sometimes I get a blank white screen, other times I get a flashing folder with a question mark.
    I have tried all the tricks in the manual, resetting PRAM, resetting RMC, I cant get into single user mode, I cant get into safe mode, I cant get into the apple hardware test etc etc
    I have borrowed disks off another friend who has a mac that looks exactly the same (as I said, I know nothing about macs) its a 24 inch Imac, thats all I know...
    is there anything I can try? It seems to play up when it gets hot or has been used for a while - it has worked but freezes and the question mark thing appears when trying to reboot etc...
    it wont read the install disk when booting up, ive tried so many diff commands like:
    command + D
    Command + C
    Command + option + r + p
    option key
    and a few others that I can't think of right now
    I either get a white screen, a flashing folder with a "?" or a grey screen with the mouse cursor which I can move but theres nothing at all to click....
    I'm sorry I can't give any more info about the Mac itself, it was bought second hand and I've always been a PC user...

    The owner need the original install discs that came with the machine. The discs you borrowed will never work because the original discs are machine specific. One of you will need to call AppleCare (in the US 800-275-2273) and order a replacement set for a nominal charge.
    I suspect the HD has crashed and will need to be replaced but there are some diagnostics you can do. One is attempting a restart in Safe Mode, this will clear some caches. The next thing you can try is following the instructions in Flashing question mark appears when you start your Mac but as you will see you will need the original install discs.
    After you have gotten the discs you should run Apple Hardware Test in Extended Mode. If no errors appear the first time run the test 2-3 times more to be sure.
    However as I originally mentioned I suspect the HD has crashed therefore making an appointment at the local Apple Store or AASP would be in order.

Maybe you are looking for