Ibook g3 and firewire

i have an i book g3 (500 mhz) running os 10.3.9. i bought this in 2001. the firewire has never worked. is there an update i can upload to get the firewire to work.
mp

There are no updates to make it work. It works right out of the box.
You could try resetting the open firmware but the chances of success are very low. The procedure is
Start up into Open Firmware by pressing and holding the Command-Option-O-F key combination during startup.
At the Open Firmware prompt, type: reset-nvram
Press Return.
At the Open Firmware prompt, type: reset-all
Press Return.
BTW, this is the iBook G4 discussion area. In the future you probably want to post in the iBook G3 discussion area.

Similar Messages

Emac disk utility not detecting ibook hardrive in Firewire mode

ok so i got this ibook g3 (800 mhz version) with no os on it so i hooked it up to my emac via firewire and booted the ibook in the firewire mode. i go into the emac disk utility to format the drive and its not there. i tried booting my emac in fire wire mode and the ibook finds the Emacs drive as a bootable drive. i tried booting the ibook from the drive but all that happed was getting the apple logo with the loading thing below it. i think the ibook is unable of booting since its 10.5.2. so any reason why the disk utility on the emac isnt finding the drive or is it a bad drive?

thanks for the help, i'm pretty sure its a bad drive or a lose connection now, i used my emac restore disk with 10.3 on it and was able to find the disk drive with a disk in it on the ibook in TDM but not the hard drive. guess im going to have to do the 20+ screw surgery on it to put in a new hard drive/look at the connection. i should just save and buy a macbook lol

MacBook to iBook - Networking ethernet/firewire/IP/Sharing

MacBook to iBook - Networking ethernet/firewire/IP/Sharing - This is the problem:
1. Firewire : I setup with firewire a MacBook to iBook IP network hub to use my MacBook over the iBook the net. Works 4 times without a problem, easy to set up, great ! Now it won't - green network status symbol in Sys>Network on booth computer. Firewire port selected on the top, as been advice already
( http://www.macdevcenter.com/pub/a/mac/2003/11/11/panther_internet.html )... IP Address is activ, but now it won't go on the net over my iBook with the DSL modem. Can't use the modem on my MacBook(SpeedTouch 330) Thats why ! But what is the problem now with the firewire connection ?
2. Ethernet : Same problem as with firewire and i have this: Conect to server - "Registered User" - ask me for Password ? No Password is setup on booth computer, but it refuse to conect : "Conection Failed" Unknown user, incorrect password ! Strange stuff...
Any help or advise would be great
Many thanks for help in advance !
Stefan

To connect to another computer on your home network as a registered user, you need to enter the administrator's name and password for the computer you are trying access.

Presonus Firebox and firewire power

Hello,
I have a firewire audio interface (a Firebox) which oddly does not have a power switch? It can be bus powered or powered with a power supply. So with the power supply all is fine, except you have to leave it on all the time, and it gets hot.
So I thought I would unplug the power supply and let it be bus powered. Well, all is fine until the computer tried to sleep, the iMac just turns off and wont turn back on? Then, if I just turn the iMac off, a steady pulse comes through my speakers, the fan goes on and off in the same pulse, and the sync light flashes on the Firebox?
I don't have much experience with firewire devices, am I breaking some protocol here? Also, I emailed Presonus, they said mu firewire bus must have some issue. Any ideas? Thank you!
UPDATE: I plugged the Firebox into my iBook, and no problems. When Firewire only powered, the device turns off when the iBook sleeps, and turns off when I shut down the iBook, just as I would expect. So, there is a firewire problem with my iMac 2.0 Ghz G5 17"?

I wonder if the issue is what this person found out about her firewire problems. Apparently, even when off or sleeping, some power goes to the firewire port, for example to charge iPods. However, I would guess this power trickle is a problem becasue my audio interface is trying to turn on, but it cant and just keeps cycling (pulsing) trying to power up but its only getting limited power. I copied the forum message I found below:
Hi Everyone
I’ve received 2 emails this morning which seem to put to bed my question.
“This is normal behavior. The FireWire port on this machine and most of our newer products are designed to provide some power when the computer is plugged in but turned off. From the developer note:
The FireWire port receives power whenever the system is plugged in.
The FireWire PHY is powered as long as the computer is connected to AC power.
This allows iPods to charge, FireWire bus powered disks to be used as Startup Volumes, and other features that require power when the computer is plugged in but turned off. In the case of hard disks, we have seen that they will only spin up when the computer is turned on; they will not spin up when the computer is turned off.”
and
“This quote from an Apple Developers page confirms this.”Important: The FireWire PHY (Vesta) does not operate from external bus power. As long as the computer is plugged into an active AC power outlet, the FireWire PHY is active and the FireWire bus remains connected. If AC power is interrupted, the PHY will stop operating and data on the bus cannot be repeated."
My thanks to Rex J. Covington, Jeff W.Davis and AppleCare Engineering -
European Response Team

IBook 466 SE - FireWire quit working

Hello,
Well, on an otherwise perfectly funtioning Graphite iBook SE 466, FireWire suddenly quit working. I have run AppleJack, OnyX, 10.4.8 Combo Update, reset nvram and all, zapped the PRAM, and performed a PMU reset. After all this, FireWire drives still don't even show if I boot from my Tiger disc. Any ideas?

I know that in most desktop macs, you can reset the firewire controller when the ports fail. This procedure goes like this:
a) Shutdown the computer
b) Unplug everything plugged into the computer including the power cable
c) Let the Computer sit for about 10min with no power and nothing plugged in
After 10minutes, only plug in the basics, (Keyboard, monitor mouse) and turn on the computer
d) The firewire controller is now reset.
In an ibook, i'd unplug it, then remove the battery for 10minutes. Since the basics are always connected, just make sure there is nothing connected to your ibook while its off and while its turning on.
Good Luck

Please help me. I have an IBook g4 and I've somehow lost plugins that I need to listen to webcasts etc. I've tried to download them when it signifies to "download appropriate plugin" or whatever it says, and when i hit the button, it says "no suitable...

PLEASE, PLEASE HELP ME. I'm a computer ignorant woman and need help. I have an IBOOK G4 and I was trying to fix a problem in IPhoto (which never got fixed) and took some guy's bad advice to reset iphoto or something and now my plug-ins are gone too. Or at least the one(s) that were allowing me to listen to on-line discussions and audio recordings.. Can anyone help me? I have gone to UPDATE SOFTWARE and updated Java but that is all. It's like I go to a think were there is an audio thing to listen to and there is a picture of a plug in and it says something like "Plug in not available to listen to this" and then gives you an option to download plug-in but when I do, it says something like "No Plug in was found that was useable" or something alone those lines. Then it has a manual plug-in option but when I clicked that, I entered the frustrated crying zone. Can you help? I will so give you big points!   Thank you!

THis is all Greek to me, but maybe it answers your questions???? Thank you Ronda.
ATA Bus:
MATSHITADVD-R   UJ-845E:
Model:    MATSHITADVD-R   UJ-845E
Revision:    DMP2
Serial Number:
Detachable Drive:    No
Protocol:    ATAPI
Unit Number:    0
Socket Type:    Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Internal Microphone:
Controls:    Left, Right
Playthrough:    No
PluginID:    TAS
Headphones:
Controls:    Mute, Left, Right
PluginID:    TAS
Internal Speakers:
Controls:    Mute, Left, Right
PluginID:    TAS
Formats:
PCM 16:
Bit Depth:    16
Bit Width:    16
Channels:    2
Mixable:    Yes
Sample Rates:    32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth:    24
Bit Width:    32
Channels:    2
Mixable:    Yes
Sample Rates:    32 KHz, 44.1 KHz, 48 KHz
DIMM0/BUILT-IN:
Size:    512 MB
Type:    Built-in
Speed:    Built-in
Status:    OK
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    6
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    6
Dynamic Power Step:    Yes
Reduce Processor Speed:    No
Automatic Restart On Power Loss:    No
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Wake On LAN:    No
Wake On Modem Ring:    Yes
Display Sleep Uses Dim:    Yes
Battery Power:
System Sleep Timer (Minutes):    9
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    9
Dynamic Power Step:    No
Reduce Processor Speed:    Yes
Automatic Restart On Power Loss:    No
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Wake On Modem Ring:    No
Display Sleep Uses Dim:    Yes
Reduce Brightness:    Yes
Battery Information:
Battery Installed:    Yes
First low level warning:    No
Full Charge Capacity (mAh):    466
Remaining Capacity (mAh):    466
Amperage (mA):    0
Voltage (mV):    16491
Cycle Count:    247
AC Charger Information:
AC Charger (Watts):    50
Connected:    Yes
Charging:    No
Hardware Configuration:
Clamshell Closed:    No
UPS Installed:    No

20" Cinema display with USB and firewire ports not working

I have a new 20" display and was wondering why my USB and fire wire ports at the back are not working. I have an external drive that is powered hooked up to the fire wire port and a no powered piano keyboard to a usb port.
Any help please

Verify that the display’s USB and FireWire cables are firmly plugged in to the
computer. Do they show in your profiler?
Try different ports in the computer.
Verify that your computer ports are working with other known problem free device.

I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks

I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks

If your iPhone can't be updated to a higher iOS version then the only way to get them is if you downloaded versions of them which were compatible with iOS 4.2.1 and you still have copies of those versions somewhere e.g. on your computer or on a backup - only the current version of each app is available in the store, and as apps (and other content) are tied to the account that downloads them, you will need to have older copies that are linked to your id

I have an iBook G4 and iTunes is no longer updating. The last update is 9.2.1 but it doesn't support my iPhone or iPad. Is there anything I can do to update iTunes or is my only recourse to update my laptop?

I have an iBook G4 and iTunes is no longer updating. The last update is 9.2.1 but it doesn't support my iPhone or iPad. Is there anything I can do to update iTunes or is my only recourse to update my laptop?

As Niel has suggested Mac OS X 10.5 Lepaord.
But first of all make sure that your iBook is above 800Mhz and you have at least 512 Meg of memory. (1 GB recommended)
Please note, that if you do install Mac OS X 10.5 on your iBook, it will not allow you to install the latest version of iTunes version 11. The most recent version of iTunes that can be installed would be 10.5, which will be compatible with your iPod touch 4th gen, provided it's not been updated to iOS 6.
Sadly you can't install any version of Mac OS X above 10.5 Leopard, as it they requires an Intel processor, which your iBook G4 does not have.
Hope this helps.

After updating to mavericks I have to constantly enter my apple ID for mail, iBooks, iTunes and many other applications that used to be part of my keychain. How can I get my log-in to work again?

After updating to mavericks I have to constantly enter my apple ID for mail, iBooks, iTunes and many other applications that used to be part of my keychain. How can I get my apple ID log-in to work again?

Several times I've re-entered my passwords under Preferences/Internet Accounts/iCloud and it won't save since I've installed Mavericks. Also, the iCloud icon in the left column in Preferences/Internet Accounts/iCloud is greyed out but allows me to click on it to set-up. When I click on iCloud the password is filled out but the "Enable this account" check-box is not checked. I check it, and all seems correct. The icon is no longer grey, the password is correct, the "activate this account" check-box is checked. Then, when I launch mail, notes etc. I'm still prompted to re-enter my apple ID. The log-in loop continues. For years my keychain has worked perfectly. What has changed in Mavericks?

What is wrong with my 30" Cinema Display? The USB and FireWire ports still work, but the screen is pitch black. When you plug it into the computer, it detects that it's a Cinema Display.

When you plug it into the computer, it detects that it's a Cinema HD but the screen is pitch black.
For some reason, the USB and FireWire ports still work.

If you shine a really bright light directly into the screen can you then see a faint image on the screen? If so, that would indicate the backlight has died (hardware failure) and the unit needs repairing.

Completely frustrated by iBooks Author and iBooks

I have been writing in iBooks Author for a while to produce a book. I loved what was shown by Apple as possibilities. My book contains a lot of diagrams, the source material are vector images (SVG or PDF). These images are sometimes large and are unreadable, unless the user can zoom in and pan/scroll around.
Given that iOS is PDF-based and that HTML5 has SVG I assumed (mistakenly) that iBooks and iBooks Author would support resolution-independence vector images. Indeed, it will accept PDF often, but on creation of the .ibook, it produces low resolution bitmaps. There is no decent way to create image viewing that enables a user to look at a diagram that cannot be read on page size of an iPad2. Interactive Image will allow larger images (up to 4096pixels wide in landscape mode), but to let the user zoom you need fake viewpoints that point somewhere and in all, creating something where the user can pan/scroll/zoom is ugly and a pain.
I have been looking at HTML5 widgets to see if one can get around this. But here too, iBooks Author seems not to allow SVG in those (just displays empty, so does iBooks Author kills the SVG on export from .iba to .ibooks?). SO, I hoped the standards of iOS (PDF and HTML5) woul dsolve any problem, but iBooks Author seems to make sure it does not work.
I am so frustrated that I am close to giving up. iBooks Author and Ibooks need (for me):
- handling vector-images (SVG and PDF) (come on, Apple, how can you be so slow with supporting resolution independence, especially given Retina iPads?)
- the ability to let the user pan/scroll over large images that can be zoomed in/out
And I am not talking about stupid things like not being able to replace an image inside a picture element with a new image without losing the picture element and having to manually redo all the links to it.
It has been more than a half year since Apple released iBooks Author. Unless I find a way to let the reader investigate larger diagrams, preferably interactive ones, e.g. created as a HTML5 widget with SVG objects in it, or unless Apple delivers a product with less problems bugs and such, my project needs to move away from iBooks.

Thanks, but I am not going to try anything else. I have lost any trust in iBooks Author that I can get this right.
First, it means buying Keynote just for this experiment and besides that means that my images all end up in a widget (I have many inlines now) which will also not be exported properly in PDF.
I am unhappy enough that I have to buy Pages to save my project (if I had known this in advance, I would probably have written the book in TeX and try to find a decent paper publisher) and lose all the nice interaction ideas I had.
If iBooks and iBooks Author still exist a year after I have finished my old fashioned book, maybe. So far, this looks like another beta-never-to-be-kept-alive-in-a-decent-way product attempt at Apple. Stuff gone like iWeb or iDVD (colleague bought his Mac, used iMove to create a Movie and wanted to create a DVD. Turns out he needs to shell out $99 for Roxio to do that. Not a happy camper).

I recently purchased a used ibook g4 and want to update to itunes 10.2. It tells me i need mac os 10.5 to do so. Today is the first day I have ever used a mac and I am not well versed on computers to begin with. What do I need to do?

I recently purchased a used ibook g4 and i want to update to itunes 10.2. It tells me that I need to update to mac os 10.5. Today is the fist time that I have ever used a mac and I am not very well versed on computers to begin with. From what I gather I need to purchase the mac os 10.5 but there are a lot of different options and I dont know what I need to do. Can somebody point me in the right direction? I dont want to spend too much money because i just want my ipod touch to be compatible with my ibook. thank you

Hi
Your question is more suitable for the 10.4's General Forum rather than 10.4 OSX Server. Post here instead:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.4_tiger?categoryID=1 77
You'll have more of a chance of someone responding.
HTH?
Tony

Apple's Technical Service Provider complaint and Firewire Target Disk solution

As being my first post, my greetings to the community!
First of all, I would like to clarify that despite I start with a post that includes some negative comments for the Apple's Technical Support Service Provider, which I visited for my problem, I wouldn't like to give the impression that I want to generally spread a negative attitude against them, but only to describe my specific issue. Anyway, only that I haven't visited them so far, after over a 3-year period of using my computer, is a self-explained positive aspect. I've also read that complaints should refer directly to customer's support service, though it is the users with whom I want to share the knowledge resulting from my last experience.
My story/problem has been as following: My computer has failed to boot, I tried some of the tips and advices online and due to the facts that I didn't have the installation disk with me and that I was under stress to recover some of my files, I was urgently needing, I decided to visit an Apple's Technical Support Service Provider. I was hoping for a quick solution, since from the beginning it wouldn't seem to be a hardware failure. I had read about the Target Disk Mode utility and I was at least looking forward to a backup, in case my hard drive was still functioning.
For starters, the provider I finally visited (Sofia, Bulgaria), was not mentioned on the Apple's web page locator. However, I first visited a Reseller, who directed me to the technical service office (other building). Also for starters, I would like to mention that the personnel was totally polite in every case. Now, for the main issue. The technician there connected my laptop via Ethernet cable to another computer, ran a test, which showed that the hardware was working and replied that he cannot know the problem, so I have to leave my computer there for 2-3 days, in order to examine it thoroughly. Luckily, I would leave the country in 2 days and I was needing the files the same day or maximum the following one, so I couldn't follow this option. "Luckily", though, while for the moment I saved 40 euros, the price for examining my problem, regardless spare parts that might would be needed and a value for a backup that I would have might asked. I explained him that I don't have the installation disk with me, just in case he could do the repair disk there, and that I read somewhere that the computer could be connected to another computer via Firewire cable and the hard disk to be seen as an external hard disk, giving me the chance to recover the files I was urgently desiring. The answer to the above was that I can only leave the computer there and I would be informed in 2-3 days. I respect the priority I had to share with other customers, but, on the other hand, to backup 2-3 files and save my life, I don't consider it (specially now that I know) a big of a deal. More important, he wouldn't give me any advice to follow myself. Conservative policy to secure responsibility issues from their part or to secure the payment for a potential check in their house?
First, I didn't try to search for the solution, provided that I didn't have any clue from the technician and that there was no chance to find someone with another mac, but also while I couldn't risk to loose time to search for a backing up solution rather to start immediately with remaking my project (I was using 3ds Max, therefore I could work on a Windows pc). So, following is the next level of my problem and the final solution.
When I got free time, I searched more and while, as I mentioned, I couldn't find another mac, I ended up to the option of being able to mount my mac's hdd to a Windows pc, after using a 3rd-party application (MacDrive in my case) and Firewire cable to link the 2 computers (Target Disk Mode). The result was that the hard disk of my mac was recognised at the Control Panel's Devices, but wouldn't be browsed. It turned to be hard to find information related to my problem, since I guess not many people have faced the exact one. The credits for the solution go here http://www.studio1productions.com/Articles/Firewire-1.htm (thank you so much), were there's an article related to how to solve Windows 7 Firewire issues. The problem was that the Firewire drivers had to switched back to the older version (legacy), which is strange, but it worked perfectly. I'm currently happily backing up my disk.
I hope this post will save time and pain for people having the same issues and I'm sorry for the thorough details I've used in order to describe accurately my concerns.
Cheers!

thanks neil, the laptop originally came with a 10 gig ibm deathstar ata drive which i replaced a couple of years ago with a 40 gig ata. i thought that maybe some necessary drivers weren't installed onto the drive since it isn't an apple branded drive but i couldn't find anything online or on apple's site to confirm that.
the titanium's ATA is controlled via cable select right?

Attaching VGA video adapter and Firewire device

I'm using the VGA video adapter to attach my brand new Mac mini to a VGA screen. As the space between video port and Firewire port is too narrow with the VGA video adapter attached I can't connect any Firewire cable!
Anyone who knows how to connect VGA video adapter and Firewire device at the same time?

The DVI-VGA adapter I got with my last mini was barely wider than the video port on the back of the mini and since a firewire connector is also barely wider than the FW port itself, there was no problem connecting to both at the same time, with a small but distinct space between. Indeed, it's about the same space as between the adapter and a cable plugged into the nearest of the USB ports on the other side.
If you're having problems, you might find that connecting the firewire cable first might help, but otherwise either the adapter or the connector on your firewire cable is non-standard. If you still can't connect both, take the mini, along with your firewire cable and the DVI-VGA adapter to an Apple store and ask them to try.

Ibook g3 and firewire

Similar Messages

Maybe you are looking for