IBook G3 Dual USB Not Finding Server With Wireless Internet
I have an iBook G3 Dual USB that has been working fine, then all of a sudden we could no longer get web sites to come up. It keeps saying server not found. I am using a Linksy wireless router and have cable internet.
I also have a desktop Mac that can still get on the net ok. It is plugged into the router by hardline. I unplugged the ethernet cable from the desktop Mac and plugged it into the iBook and still can not get online.
Anyone have any suggestions why I can no longer get on the net? We have not changed any settings. One minute it was fine, the next nothing.
When I go into AirPort, it is showing a strong signal.
Any ideas?
Thanks,
mphi55
Message was edited by: Michael Howard6
Message was edited by: Michael Howard6
When I replied to your latest post you had indicated that you were still having problems getting on the Internet through a hard line. I see that that has changed.
Given the new data I think you are on the right path. If you zapped your PRAM and everthing is fine then disregard the rest of this message.
If things still don't work right...
New suggestion. Check the router and be sure the antennaes are secured to the back of the router and visually check them for signs of damage. If all looks good then cycle the router (if you have not done so already) and see if that helps. Its a long shot, but its worth a try.
If you are still having problems then taking the iBook to work and seeing if you can gain access to the Internet through your wireless network is a good idea (as long as the network is open). If you can get on-line then the router at home is suspect. If not then the card is suspect.
One last suggestion for the Mac. If you can, use another Airport card in your iBook. If you can get on-line with a different card then you know there is a problem with the other card and not the router. If you are still have problems getting on-line with a differemt card then getting another router may solve the issue.
Similar Messages
-
IBook G3 Dual USB Not Finding Server
I just did a full clean restore for disk ... I'm now trying to connect to the internet via Ethernet . I'm getting error message " The specified server could not be found" , The system defaults to Explorer (5.1) which I'm not familiar with . I check my network and it show built in ethernet and using DHCP. The only think I didn't do was setting up emil .
What I'm I missing !Some of the earliest (500 MHz, CD-ROM only) ones had only 64 MB.
I would recommend maximizing the RAM with a 512 MB RAM module.
http://docs.info.apple.com/article.html?artnum=302333
http://docs.info.apple.com/article.html?artnum=111918 -
Ibook g3 dual usb not reading discs?
Hi,
my ibook g3 is not reading any cds, i put them in, then it messes round abit and then it spits it back out? is there any way to fix it???You may want to try a CD drive cleaning CD and see if it does any good.
-
CSD Load Data Full completing with Could not find server for data domain Error
Hi,
We have installed the Oracle Ebusiness suite extension with Endeca following the Oracle Support note : 1562372.1.
We found that the CSD Load Data Full completing with below error :
Element [ENDECA_MERGE_RECORDS0:Bulk Add/Replace Records]-Component pre-execute initialization failed.
at org.jetel.graph.Node.run(Node.java:446)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:722)
Caused by: Failed with the following exception:
java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
org.apache.axis2.AxisFault: Could not find server for data domain
at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:155)
at org.jetel.graph.Node.run(Node.java:444)
... 3 more
Caused by: java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
org.apache.axis2.AxisFault: Could not find server for data domain
at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:99)
at com.endeca.clover.adapters.DIWSConsumer.<init>(DIWSConsumer.java:45)
at com.endeca.clover.adapters.merge.MergeRecordsConsumer.<init>(MergeRecordsConsumer.java:51)
at com.endeca.clover.adapters.merge.UpsertRecordsConsumer.<init>(UpsertRecordsConsumer.java:36)
at com.endeca.clover.adapters.merge.MergeRecordsAdapter.getConsumer(MergeRecordsAdapter.java:110)
at com.endeca.clover.adapters.DIWSAdapter.createConsumerThreads(DIWSAdapter.java:56)
at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:146)
... 4 more
Caused by: org.apache.axis2.AxisFault: Could not find server for data domain
at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:446)
at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:371)
at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:417)
at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
at com.endeca.dataingest.axis2.ingest.IngestStub.ingestChanges(IngestStub.java:791)
at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:88)
... 10 more
Kindly request your help in resolving this error.Hi,
We have installed the Oracle Ebusiness suite extension with Endeca following the Oracle Support note : 1562372.1.
We found that the CSD Load Data Full completing with below error :
Element [ENDECA_MERGE_RECORDS0:Bulk Add/Replace Records]-Component pre-execute initialization failed.
at org.jetel.graph.Node.run(Node.java:446)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:722)
Caused by: Failed with the following exception:
java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
org.apache.axis2.AxisFault: Could not find server for data domain
at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:155)
at org.jetel.graph.Node.run(Node.java:444)
... 3 more
Caused by: java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
org.apache.axis2.AxisFault: Could not find server for data domain
at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:99)
at com.endeca.clover.adapters.DIWSConsumer.<init>(DIWSConsumer.java:45)
at com.endeca.clover.adapters.merge.MergeRecordsConsumer.<init>(MergeRecordsConsumer.java:51)
at com.endeca.clover.adapters.merge.UpsertRecordsConsumer.<init>(UpsertRecordsConsumer.java:36)
at com.endeca.clover.adapters.merge.MergeRecordsAdapter.getConsumer(MergeRecordsAdapter.java:110)
at com.endeca.clover.adapters.DIWSAdapter.createConsumerThreads(DIWSAdapter.java:56)
at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:146)
... 4 more
Caused by: org.apache.axis2.AxisFault: Could not find server for data domain
at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:446)
at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:371)
at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:417)
at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
at com.endeca.dataingest.axis2.ingest.IngestStub.ingestChanges(IngestStub.java:791)
at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:88)
... 10 more
Kindly request your help in resolving this error. -
Old PowerBook 1400 charger power iBook G3 Dual USB?
I ordered an iBook G3 Dual USB (the white one, not the clamshell iBook) but I only have a 45W PowerBook 1400 power adapter. Will this power the 500MHz system?
It would, except the adapter tip won't fit in the power socket of the iBook. You will need a newer adapter with a smaller tip to fit the iBook G3 (Dual USB).
If it doesn't come with an adapter, here are some possible sources for the right adapter, including some less expensive third-party adapters:
http://store.apple.com/us/product/M8943LL/A
http://www.powerbookmedic.com/White-Brick-Style-45W-Power-Adapter-M8482-NEW-p-16 185.html
http://www.amazon.com/gp/product/B0001YXWVO/104-2129172-0414319?v=glance&n=17228 2
http://eshop.macsales.com/Catalog_Item.cfm?ID=6432&Item=MICACADPTG4
http://macwizards.com/store/productinfo.php?products_id=19&gclid=CNbEujkwZkCFSbxDAodXDaotQ
http://www.teksale.com/laptops/laptopparts/listings/apple-ac-adapter-g4.htm
It doesn't matter whether it's a 45 or 65 watt adapter; either will work. (The 65 watt is needed for newer PowerBooks. It won't hurt an iBook to use a 65 watt adapter with it, even though they originally came with a 45 watt model.) -
Ibook g3 Dual usb 800Mhz 256MB 30GB video problem
I have a Ibook g3 Dual usb 800Mhz 256MB 30GB and I put Mac OS X 10.2 on there and the screen is really small its running at 640/480 and i tired making it 1024/768 but the option is not there. Do I need drivers or something or do i need a update. I dont know anything about a apple computer im a windows user and I am thinking on changing over and was going to try out this ibook and it had no OS so I looked it up and it said came with Mac os x 10.2 so I put that on there and you know the rest.
$50 is a pretty good price.
http://hardcoremac.stores.yahoo.net/macosx10pare.html
Make sure you get the full retail version (black disc) and not a system-specific (gray disc) set.
If you decide on Mac OS X 10.4 (Tiger), you are likely going to have to maximize the RAM because 256 MB is the bare minimum, and it will be slow.
I stuck with Mac OS X 10.3 (Panther) for my iBook G3 800 MHz and bought an iBook G4 when I wanted to upgrade to Tiger.
Good luck. -
WebtopNaming - can not find server name for server ID
We have a LB, and web servers in front of OpenSSO app servers in our environment.
OpenSSO debug log CoreSystem fills up with lot of errors like these:
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
Sometimes, it even complains about a server id (07 in the following trace) which doesn't even exist in the Site Id Table.
There are no changes in the configuration. DNS is properly configured and all the servers and their connectivity are available. CoreSystem throws these errors even after a restart of opensso app servers.
Any ideas about the root cause?
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, http://host4.company.com:8080/openSSO=04, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, http://host5.company.com:8080/openSSO=05, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, 03,05,04,02|03,01|03=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, 02|02,01|01,05|05,04|04=iplanet-am-platform-lb-cookie-value-list, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, https://host4.company.com:8443/openSSO=01, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, https://host5.company.com:8443/openSSO=02, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, https://opensso-qa.company.com:443/openSSO=03}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Site Id Table -> {03=03, 02=03, 01=03, 05=05, 04=04}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Servers -> [https://opensso-qa.company.com:443/openSSO, https://host5.company.com:8443/openSSO, https://host4.company.com:8443/openSSO, http://host4.company.com:8080/openSSO, http://host5.company.com:8080/openSSO]
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Server IDs -> [03, 02, 01, 04, 05]
amNaming:05/13/2011 10:22:37:010 AM PST: Thread[WebContainer : 0,5,main]
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
at com.iplanet.services.naming.ServerEntryNotFoundException.<init>(ServerEntryNotFoundException.java:52)
at com.iplanet.services.naming.WebtopNaming.getServerFromID(WebtopNaming.java:709)
at com.iplanet.dpro.session.SessionID.setServerID(SessionID.java:380)
at com.iplanet.dpro.session.SessionID.parseSessionString(SessionID.java:363)
at com.iplanet.dpro.session.SessionID.getSessionServerID(SessionID.java:261)
at com.iplanet.dpro.session.service.SessionService.isLocalSite(SessionService.java:881)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:1197)
at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:153)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:578)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)Thank You for the response.
Here is my site configuration in OpenSSO:
There are 4 servers in the two opensso hosts (2 secure, 2 non secure)
Servers:
http://host4.company.com:8080/openSSO
http://host5.company.com:8080/openSSO
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
Only one site with secure URLs is configured
Sites:
site1
Primary URL: https://opensso-qa.company.com:443/openSSO
Assigned Servers:
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
From the CoreSystem log, Server ID definitions are:
https://host4.company.com:8443/openSSO=01
https://host5.company.com:8443/openSSO=02
https://opensso-qa.company.com:443/openSSO=03
http://host4.company.com:8080/openSSO=04
http://host5.company.com:8080/openSSO=05
Sometimes it throws an exception with existing server IDs. But sometimes it also complains about non existing server IDs. -
RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'
Hi, All
the system is PI 7.0 EHP1 oraclei Win2003 server, I configured SLD but I run RZ70, having error "RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA' ". I know there are lot of tread about this error, but none of themsolve my problem. all JCO, RFC connections and SDL DATA supplier(VA) seem OK. error message in SM21 is "Could not send SLD data"
detail from SM21
The system could not send the data that has been collected automatical
for the System Landscape Directory (SLD). Check whether the gateway
configured in transaction RZ70 has been started and whether the SLD
bridge has been registered with this gateway.
You can use transaction SM59 to check this in the sending system for t
implemented RFC destinations. The RFC destinations have the standard
names "SLD_UC" for Unicode sending systems and "SLD_NUC" for non-Unico
sending systems. If a different RFC destination has been entered in
RZ70, check this destination instead.
You can use the Gateway Monitor to check the target gateways. In ABAP
systems, this monitor is started with transaction SMGW, or you can use
the external SAP program "gwmon". Check whether the specified gateway
has an active registration.
OF COURSE I checked RFC of SLD_UC and SMGW
any different ideas
Regards
ABHHi
Please check the following notes are implemented
Note 906454
Note 907729
You may be aware but if you are not --->RZ70 creates the required SLD* RFCs during runtime - therefore if you have defined these RFCs manually first using the same namespace you can get RFC conflicts which result in a failed submission
Please also check the user in the RFC is known to both systems and has required authorization to write to SLD
Generally with SLD you have to install or select a suitable gateway to handle incoming data supply traffic
Also the gateway you are using has be known to SLD and reflected in RZ70 - i.e these defintions have to be the same
It is also recommended to delete all references to SLD_* RFCs in data supplier and target SLD
after a failed submission attempt to allow RZ70 to recreate these consistently once the above has been checked
Best wishes
Stuart -
JCO.Server could not find server function 'CONTROL_RECIPE_AVAILABLE'
Hi Experts,
I've been trying to read some of the topics in the forums to find answers about the error JCO.Server could not find server function but still haven't resolve the issue.
Basically, the scenario is from SAP r/3 to PI 7.1 ehp1 (process integration) system.
All of the aforementioned steps we're done.
R/3 (SAP) end
1.) Create RFC destination (T)
2. ) Indicate the program ID
3.) Indicate the server/hostname
4.) Indicate the sap gateway
Test connection was made and it was successful.
SAP PI end.
Integration Directory (Let me skip from the basics and state directly the setup of my senderRFC)
1.) RFC Comm Channel (set as Sender)
2.) Indicated the server hostname (sending system), sap gateway and Program ID (basically what was indicated in RFC setup in SAP end)
3.) RFC Metadata Repository Parameters (In here I used the details of PI environment)..Created user with SAP_ALL profile..I used system without Load Balancing (Parameter, AppServer, SysNo, Logon User, Logon Password, Language and Client)
I was able to test a message from SAP end but still "JCO.Server could not find server function" was the result upon checking sm58.
Did I miss something from my setup and config?Hi Michal,
I guess there's a big difference with RFC Server Parameters and with RFC Metadata Repository Parameters.
Note: Im using PI 7.1 ehp1
For RFC Server Parameters it includes:
- Application Server (gateway)*
- Application Server Service (gateway)*
- Program ID*
For RFC Metadata Repository Parameters it includes:
- Load Balancing or no Load Balancing (choices)..in here my choice is no Load Balancing
- Application Server*
- System No*
- Logon Language*
- Logon Client*
- Authentication Mode (Use Log-on Data for SAP System or Secure Network Connection for RFC)
if Use Log-on Data for SAP System it includes:
- Logon User*
- Logon Password*
If Secure Network Connection for RFC it includes:
- Quality of Protection
- SNC Partner Name
Looked onto your blogs mentioned several times, but no information on RFC Metadata Repository Parameters. -
Adobe Content Server 4.1 - Cound not find server's private key in the keystore
Hello,
I have getting following error when i setup fulfillment services of Adobe Content Server 4.1.1
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
root cause
java.lang.Error: Cound not find server's private key in the keystore
com.adobe.adept.fulfillment.security.ServerConfig.init(ServerConfig.java:156)
com.adobe.adept.fulfillment.security.ServerConfig.getSigningURL(ServerConfig.java:48)
com.adobe.adept.fulfillment.servlet.FulfillmentServerStatus.getServers(FulfillmentServerStatus.java:34)
com.adobe.adept.common.servlet.Status.checkUp(Status.java:355)
com.adobe.adept.common.servlet.Status.doGet(Status.java:424)
javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.20 logs.
My fulfillment-conf.txt contains following:
com.adobe.adept.log.level=trace
com.adobe.adept.log.file=C:\acs4\log\fulfillment.log
com.adobe.adept.persist.sql.driverClass=com.mysql.jdbc.Driver
com.adobe.adept.persist.sql.dialect=mysql
com.adobe.adept.persist.sql.connection=jdbc:mysql://127.0.0.1:3306/adept
com.adobe.adept.persist.sql.user=acesdbuser
com.adobe.adept.persist.sql.password=******
com.adobe.adept.serviceURL=http://127.0.0.1:8080/fulfillment
com.adobe.adept.fulfillment.security.licensesignURL=https://nasigningservice.adobe.com/licensesign
com.adobe.adept.fulfillment.security.keystore=pkcs12
com.adobe.adept.fulfillment.security.pkcs12.file=file:///C:/ACS4/operator.p12
com.adobe.adept.fulfillment.security.keystore.user=operator4acs
com.adobe.adept.fulfillment.security.keystore.password=******
Any Idea?
Regards,Are you sure you created the .p12 file with the correct '-name' friendly name? The value for -name must match the value com.adobe.adept.fulfillment.security.keystore.user
-
SAP IGS: JCO.Server could not find server function 'PIGFARMDATA'
dEAR ALL,
Operating System: aix6.0
Database: Oracle 11g
IGS is not getting started.
SM59--IGS_RFC_DEST--CONNECTION TEST is fine
sigs-- IGS_RFC_DEST-- Error is generating " JCO.Server could not find server function 'PIGFARMDATA' ".
Tried starting IGS USING the below command:
/usr/sap/KBQ/DVEBMGS01/exe/igswd_mt -mode=profile pf=/usr/sap/KBQ/SYS/profile/KBL_DVEBMGS01_<Hostname>
Startup using profile
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 1/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40180) [nixxi.cpp 3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40100) [nixxi.cpp 3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40101) [nixxi.cpp 3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40102) [nixxi.cpp 3735]
kbqadm> sapcontrol -nr 01 -function GetProcessList
22.07.2014 16:36:48
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
msg_server, MessageServer, GREEN, Running, 2014 07 22 16:33:57, 0:02:51, 8847548
disp+work, Dispatcher, GREEN Running, Message Server connection ok, Dialog Queue time: 0.00 sec, AS Java: ALL processes running, 2014 07 22 16:33:57, 0:02:51, 12976352
rslgcoll, Central Syslog Collector, GREEN, Running, 2014 07 22 16:33:58, 0:02:50, 9175214
rslgsend, Central Syslog Sender, GREEN, Running, 2014 07 22 16:33:58, 0:02:50, 8585278
DVEBMGS01\exe\ig.sapKBQ_DVEBMGS01, , GRAY, Stopped, , , 13566036
ps -ef | grep igs--all igs process are running
HTTP://<HOSTNAME>:40180---sap igs IS RUNNING
IGS Logs: ( /usr/sap/KBQ/DVEBMGS01/igs/log)
trace File pw_sapbwqa_1.trc
[Portwatcher::Ping] Ping was unsuccessful 3 times
[Portwatcher::Ping] Reconnect Portwatcher
Tue Jul 22 16:54:11 2014
[Portwatcher::Ping] Ping was unsuccessful 1 times
Tue Jul 22 16:54:41 2014
[Portwatcher::Ping] Ping was unsuccessful 2 times
igs vERSION IS Internet Graphics Service 7200.0.7.0
"mux_sapbwqa.trc---tRACE File
Tue Jul 22 16:29:13 2014
*** ERROR => [ListenerRfc::Loop] RfcListenAndDispatch() (IGS.KBQ sapbwqa sapgw01) returned error: RFC_INVALID_HANDLE [listenerrfc_ 1039]
*** ERROR => [ListenerRfc::OpenRfc] RfcRegisterServer() returned RFC_COMMUNICATION_FAILURE /
ERROR partner 'sapbwqa:sapgw01' not reached
TIME Tue Jul 22 16:29:13 2014
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 2896
DETAIL NiPConnect: 10.10.90.150:3301
SYSTEM CALL connect
ERRNO 79
ERRNO TEXT Connection refused
COUNTER 18
[listenerrfc_ 948]
*** ERROR => [ListenerRfc::Loop] OpenRfc() (IGS.KBQ sapbwqa sapgw01) returned RFC_COMMUNICATION_FAILURE
Still trying... [listenerrfc_ 1007]
Tue Jul 22 16:30:13 2014
*** ERROR => [ListenerRfc::Loop] RfcListenAndDispatch() (IGS.KBQ sapbwqa sapgw01) returned error: RFC_INVALID_HANDLE [listenerrfc_ 1039]
trc file: "mux_sapbwqa.trc", trc level: 1, release: "720"
Tue Jul 22 16:39:40 2014
[IgsMux::Initialize] Internet Graphics Service 7200.0.7.1
[IgsMux::Initialize] Platform: IBM RS/6000 with AIX (rs6000_64)
[ListenerRfc::ListenerRfc] Constructed for R/3 NA
[ListenerHttp::ListenerHttp] Constructed for port 40180
*** ERROR => [ListenerHttp::Loop] NiListen on port 40180 failed [listenerhttp 703]
[ListenerHttp::~ListenerHttp] Destroyed for port 40180
[Multiplexer::StartUp]
*** ERROR => [ServerTcpIp::NiServerLoop] Caught a NetError: [NetError] [NiBufListen failed] [ServerTcpIp::NiServerLoop()] [-4]. [servertcpip_ 254]
can you please tel the reason why the IGS is not working
Regards
gayathri.KHi Gayathri,
Startup using profile
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 1/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40180) [nixxi.cpp 3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40100) [nixxi.cpp 3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40101) [nixxi.cpp 3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40102) [nixxi.cpp 3735]
Just check the process which is using the port
netstat -tupan|grep 40180
With Regards
Ashutosh -
Error RFC sender scenario :JCO.Server could not find server function
Hi ,
The scenario which am working is as follows:
I already have a report in R/3 that calls a Bapi which is in CRM system, now I want to make this point-point connection through XI(RFC sender-XI-RFC Reciever) with out changing the report (only changing the RFC destination).
I have imported the bapi from CRM to XI , changed the rfc destination(to tcp/ip) that existed in R/3 to point to XI(test connection is working fine) and also created the RFC sender adapter .
Now on executing the report am getting the following error.
JCO.Server could not find server function
Please, let me know where I went wrong.
Should the function module exists on the XI server. If the functional module is not there then I am getting the error if the function module is there in XI then every thing is working fine.Hi Michal ,
Now my scenario is working . The error <b>"JCO.Server counld not find server function"</b> got fixed by giving the system details that contain the RFC in the adapter metadata parameters in the channel configuration.
Thanks & Regards,
Srikanth. -
JCO.Server could not find server function "ZVERIFY_FILE"
Hi Experts,
I am facing one problem, i have created on TCP/IP connection with connection type T and given it some Program Id.
I have register this Program id On SRM server.
Now from this server i want to call one JAVA file, for that purpose i have installed JCO on the server.
My server file looks like,
import com.sap.mw.jco.*;
//import com.tcs.jns.JSignNS;
//import com.tcs.jns.JSignNSException;
//import com.tcs.jns.CertDetails;
// added by paresh on 16.1.2009
import java.io.FileOutputStream;
import com.tcs.jie.jverify.JVerify;
import com.tcs.jie.jsign.JSign;
public class ds_listener extends JCO.Server {
Create an instance of my own server
@param gwhost (gateway host)
@param gwserv (gateway service number)
@param progid (program id)
@param repository (repository used by the server to lookup the definitions of an inc)
public ds_listener(String gwhost, String gwserv, String progid, boolean isUnicode, IRepository repository) {
super("sapdev14", "sapgw01", "DS_RFC", repository); this.setProperty("jco.server.unicode", isUnicode?"1":"0");
/** Overrides the default method. */
static ds_listener serverConnections[] = new ds_listener[1];
protected void handleRequest(JCO.Function function) {
JCO.ParameterList input = function.getImportParameterList();
JCO.ParameterList output = function.getExportParameterList();
if (function.getName().equals("ZVERIFY_DATA")) {
try{
JVerify JNS = new JVerify();
String dbPath = "/home/admin/FormSigner_23Apr/FormSigner_Release/certdbs";
//boolean res = JNS.init (dbPath); // commented by paresh on 16.1.2009 as its obsolute
//initialize method has to be called before calling any other method of the API
String recdSignature = input.getString("SIGNATURE");
boolean ret_update = JNS.updateSignature(recdSignature.getByetes());
if (ret_update){
int count = JNS.getSignerCount();
boolean ret_verify_sign = false;
while(count > 0){
ret_verify_sign = JNS.verifySignature(count - 1);
if (ret_verify_sign){
ret_verify_sign = false;
count = count - 1;
}else
break;
if (count == 0){
String decoded_data = new String(JNS.getDecodedData());
output.setValue("X", "STATUS");
output.setValue(decoded_data, "DATA");
}else{
output.setValue(" ", "STATUS");
output.setValue("Error in Signature Verification. Please check Certificate Validity of every signer.", "DATA");
}catch (Exception e1){
output.setValue(" ", "STATUS");
output.setValue(e1.getMessage(), "DATA");
}else if(function.getName().equals("ZVERIFY_FILE")) {
try{
JVerify JNS = new JVerify();
String dbPath = "/home/admin/FormSigner_23Apr/FormSigner_Release/certdbs";
//boolean res = JNS.init (dbPath); // commented by paresh on 16.1.2009 as its obsolute
//initialize method has to be called before calling any other method of the API
String recdSignature = input.getString("SIGNATURE");
boolean ret_update = JNS.updateSignature(recdSignature.getBytes());
if (ret_update){
int count = JNS.getSignerCount();
boolean ret_verify_sign = false;
while(count > 0){
ret_verify_sign = JNS.verifySignature(count - 1);
if (ret_verify_sign){
ret_verify_sign = false;
count = count - 1;
}else
break;
if (count == 0){
output.setValue("X", "STATUS");
}else{
output.setValue(" ", "STATUS");
}catch (Exception e1){
output.setValue(" ", "STATUS");
}else{
return ;
Start the server
public static void startServers() {
JCO.addClientPool("POOL",3,"200","sisldp","paresh1234","EN","sapdev14","01");
IRepository repository = JCO.createRepository("REP", "POOL");
for (int i = 0; i < serverConnections.length; i++) {
// Server listens for incoming requests from system 1
// (Change gateway host, service, and program ID according to your needs)
serverConnections<i> = new ds_listener(
"sapdev14",//gateway host, often the same as host
"sapgw01", //gateway service, generally sapgw+<SYSNR>
"DS_RFC", // corresponds to program ID defined in SM59
true, // or false for non unicode listener
repository);
serverConnections<i>.start();
public static void main(String[] args) {
startServers();
The file have no error as i have compiled it on server, its listener file given in JCO with some modification.
I have tested the connection from SM59 it's working fine,but when i call my any of the 2 function(ZVERIFY_DATA & ZVERIFY_FILE) defined in my java file then i am getting an error "JCO.Server could not find server function 'ZVERIFY_FILE'" on SRM screen.
Can anyone tell me what can be the reason????
please help, i am in real trouble.Hi,
This is may be of the wrong FunctionModule name means check in case also,it may be case sensitive.
And check whether it is remotely enabled or not and check the RFC destination.
For more details refer these threads.
JCO.Server could not find server function 'SET_SLD_DATA'
JCO.Server could not find server function
Problems with sender RFC
Thanks. -
IBook G3 Dual USB won't completely boot
I have an iBook G3 Dual USB 500 mhz. I went to boot it up the other day, i heard the boot sound, saw the initial grayish screen with the apple logo. then it went to a tanish screen with the folder with a question mark, then the folder with the mac face. and it continued to go back and forth with those two icons. I thought it was the hard drive so i replaced it with a good one. But it still does the same thing.
If i try booting while holding the option key,the blue screen that comes up for the boot source comes up. It identifies the hard drive, and if there's an install disc in the drive, it reads that as well. If i try booting from either location, it just refreshes the pages.
Or if i holding the "c" button down while booting, it goes to the screen with the ? folder and the mac face folder.
Any suggestions?If it won't boot from a known good disk, then it's likely that there's been a hardware failure, probably the logic board. You can try resetting the PMU, via the instructions in this document:
http://support.apple.com/kb/HT1431
and see if that makes any difference, though it's a long shot. If that fails, then your iBook has probably gone to the "great beyond".
Regards. -
When I try to use safari I get a message that states can not find server Xn--%20%20-1ia0eb092a
It sounds like you've got a messed-up homepage. Click the Safari menu, click Preferences, and under "Home page", re-type the page you'd prefer to load when Safari starts (eg "nytimes.com" or whatever). Close preferences and try again.
Matt
Maybe you are looking for
-
What does "Analyze audio for flex time editing" in Garage Band? It's taking so long(3 days)! and I can't shut down my pc.
-
Hi gurus, We want to create the following scenario: HTTP - XI - SOAP We have test with several combinations of the parameters of the HTTP Adapter Sender and the SOAP Adapter Receiver and we obtain: java.io.IOException: invalid content type for SOAP:
-
[Consolidation Locked] What does Error 213:19 mean?
I cant enter my Photoshop elements 10 neither Premiere on my laptop i keep seeing the error code 213:19 Wdat should i do? Message title was edited by: Brett N
-
Hi, I added User name in Log general-Tax on goods moment and Master data and also CIN tab comming in MK02.But if Click CIN Details in MK02(MK01) system not opening any data. But in XK02(XK01)is opening why not in MK02?,is there any setting is require
-
As described in BDB document: Cursor.Move Method (DatabaseEntry, Boolean) Set the cursor to refer to key, and store the datum associated with the given key in Current. In the presence of duplicate key values, the first data item in the set of duplica