IBook G3 from eBay.....DVD player???

Hello all, I got my girlfriend a 2003 iBook G3 dual USB from eBay and it's in nice condition and clean installed however it doesn't read dvds nor does it have Apple DVD player. I tried putting the DVD player on but it didn't open. On the ebay site it didn't specifically say DVD player. I have a 2002 iBook and it has a DVD player and CD writer. My understanding is that all these could at least play DVD's, and as far as writing a CD that was just a matter of having a combo drive or super drive. Did Apple make non DVD reading iBooks during this time??? It picks up normal audio CD's.
Thanks for the help guys!
Charles

Yes, some 800 MHz iBooks were CD-ROM only.
http://support.apple.com/specs/ibook/iBookEarly2003.html

Similar Messages

  • How do I download dvd's to my Mac Mini from my dvd player?

    I am wanting to download dvd's to my mac mini from my dvd player. Can anyone tell me how to do this? Also, after I get them on my mac mini I want to put them on my IPAD. Any suggestions would be greatly appreciated! I am not the most tech savvy person

    You cannot.
    DVDs are encrypted to stop you from doing this.  Breaking this encryption is illegal.
    Judge Rules DVD-Copying Software Is Illegal | Threat Level | Wired ...
    Judge: DVD-copying software is illegal - CNET News
    DVD copying software is illegal under DMCA, says Judge – Tech ...
    Judge rules that DVD copying software is illegal | Technology ...

  • Watch DVD Movie From External Dvd Player

    Hello! I hope someone can help me. I've been wondering if i can connect an external dvd player (not dvd drive) in my powerbook to watch movies. There are some disc that my PB superdrive couldn't read but when using my external dvd player it works. Is it possible to do so??? Thanks....

    You will not be able to connect the external DVD player directly to the PowerBook. However, with the aid of a device like Elgato's eyeTV you can then connect the DVD player to the eyeTV, which is connected to the PB.
    A relatively complicated way to watch a DVD on the PB, but the eyeTV does provide more options as well.
    15" 1.25GHz/12" 1GHz PBs, 2xPPC Mac minis, 12" iBook G4,   Mac OS X (10.4.6)   Cube, 2xTAMs, iPods 2G/4G, iPs, AEBS, AX

  • How to install HDMI from HDMI DVD player to watch movies from iTunes?

    I have bought an HDMI outlet for my MacBook Pro, My TV doesn't have HDMI so i bought an HDMI DVD player at big lots (GPX HDMI DVD Player) the mac to HDMI transfer outlet (Rocketfish) i got at best buy same goes for the HDMI outlet. I'm the type that doesn't want to buy more stuff that costs over $40 just to watch movies from iTunes to my TV. I don't want to have a complexed installment i just want to know how to get this going before i get frustrated and stressed out. So could you help me with this situation Please?

    See if this link helps you out.
    http://support.apple.com/kb/HT4072?viewlocale=en_US&locale=en_US
    Never tried it myself but hopefully it's what you're looking for.
    Good luck.

  • Is It Possible To Get 5.1 Digital Sound from a DVD Player or my P

    I use my computer as my home entertaniment system as it has a TV Card and all that. I have my Dish Channels coming in through my computer as well as my Playstation 2 and my Samsung DVD Player. So far I have never been able to get anything more than 2. quality audio from these sources even though they have 5. sound capability. Is there some external device I am missing. I have a Dell installed Sound Blaster Li've Card. Any thoughts on this would be prime. Thanks.

    You can export 5.1 wav files from Premiere with no problem, what you can't do is export Dolby Digital 5.1. Premiere will let you export stereo Dolby Digital but not the surround files, that requires Surcode. If your playback system can cope with wav. you don't need Surcode but if you are making dvs or Bluray you do.

  • Imaging from external DVD player or an external usb hard drive

    Hey,
    At the High School i work at we are running Netware 6.0 SP5 and Zenworks
    4.01 ir6. We have Zen Partitions installed on most computers to store a
    local image in case the the computer needs to be re-imaged.
    However, we have a dilemma. Every now and then a hard drive will go in a
    computer.
    When we replace the hard drive with a new one, we install the Zen
    Partition, do the config and then our last step is to bring down an image.
    Unfortunately our only means of dropping down an image is from the network
    either through normal imaging or through multicast sessions.
    When we drop an image down from the network which takes up network
    bandwidth, it causes slow downs on the users computers and they start
    complaining. Our network is running at 100mb.
    Is there any way possible to image from an external DVD player or an
    external usb hard drive when dropping down an image to a new hard drive in
    the computer? Currently I have all my Zen Images on the external USB
    Maxtor 160gb hard drive and I also have Zen Images burnt to DVD's.
    If so, how do I go about doing this and is there documents on doing this?
    Thanks!!!

    Bpilon,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Transfering a video from my DVD player into my MAC (IMOVIE)?

    How can I transfer a video, which I can play my DVD player into my MAC (IMOVIE)?

    Hey Doug,
    Thanks for responding.
    Here's the deal: I have a Sony Camcorder (that records on a small hard disc), which I'm borrowing to capture about 4 minutes of footage. THe Sony DOES NOT have a firewire port. So I thought that MAYBE I could play the dvd on a dvd player and transfer he footage form the dvd player to my MAC.
    But jnow I'm wondering, even if I could, would htere be any "code" or encoding problems, since it is coming from a minidvd camcorder rather than from a minidv camcorder.
    Maybe the best solution is just find a minidv camcorder and capture the footage on that (I just have to fiond one).
    Thanks,

  • How Do I Use my MacBook Pro to Watch a DVD From External DVD Player

    Hello Everyone!
    While waiting for Apple TV to become available in my place of work, I want to use my MacBook Pro monitor for watching a DVD movie played on an external DVD player. The DVD player I have is an LPC-D1000, which is a new model. While Mac has its own DVD player, I'm trying to make use of my LG DVD player. If that's possible, please guide me on how to do it.
    Thank you.

    You could use Elgato Systems' EyeTV product to view external video sources on your MBP.
    There is additional cost involved, but it would achive what you want. You can buy the Hybrid product, and connect your external DVD player via Composite (red, white and yellow connectors) to your MBP via the EyeTV.
    http://www.elgato.com/index.php?file=products_eyetvhybridna&PHPSESSID=3c4e16afe5 0303162b285a6f70791f86

  • I-Trigue 5600 5.1 sound from my DVD player

    Hi all,
    I've got a JVC DVD player which includes DTS/Dolby decoder etc and has Optical and Coaxial Digital outputs. Is there any way to connect this to my I-Trigue speakers to get proper 5.1 surround sound or do I have to stick with just connecting the Audio Out L/R to the speakers and having it set on UpMix to get pseudo (sp?) 5.1
    Thanks for the help folks.
    Regards,
    Tim.

    Tim,
    Does your DVD player have 6 RCA audio output that's normally meant for connect a 5.1 speaker system or does it only have optical and coaxial output?
    If the player have 6 RCA output, you can get a stereo minijack to dual RCA cable. Plug the minijack end to the subwoofer audio input and RCA end to the player.
    If not, you can look at options like the DDTS-100 decoder that spots optical/coaxial input.
    Jason

  • Re-installing DVD player and iBooks app?

    I recently deleted certain apps like DVD player, game centre etc as i didn't ever use them but I'm getting some little issues now.
    When i open FaceTime an error message comes up saying its from the DVD player app.
    I also have a blank Game Centre app icon in my Apps folder.
    I imagine i need to re-install them. Any ideas how?
    Also id like to be able to read my ibooks on my mac... is there an app for Mavericks?
    Thanks

    benjigordon wrote:
    thanks. is there anything i need to consider or backup before i do that?
    Just all of your data. The restore shouldn't delete anything or cause you to lose any data, but it is not something you want to start without a backup.
    Also... how easy is it to do?
    Pretty easy: OS X Mavericks: Reinstall OS X

  • Can't record sound from DVD player

    I just built a new DAW with a Gigabyte MoBo that has the Realtek sound chip on board. I installed an M-Audio external Fast Track Pro connected to the computer with USB 2.0. With the two sound devices I can play Band in a Box (my main band) through the Realtek and out put to my mixer. I then use my Line 6 Pod XT as a preamp to my guitar that also goes to my Behringer mixer. I connect the main out (R&L) from the mixer to the 1 and 2 inputs on the M-audio. I set Audio Hardware setup in AA3 to use the M Audio device for input and am able to record mixer output to tracks in AA3. I tried several configs and this is the only one that I found that works. All is good so far.
    I installed a SATA DVD player (Lite on 24x) that works fine, but it plays through the M-Audio via USB, bypassing the Realtek chip, and the sound does not show up in AA3. I'm thinking I need to route the DVD output to the mixer to use the channel that is already set up. I've been trying to output the DVD player through the onboard Realtek but can't find any way to direct it to do so. I don't necessarily need it to play through the Realtek, but I want to be able to record from the DVD player.
    So, does anyone have any idea how to direct the output of the DVD player to the sound card of choice? I'm stumped.

    Eric,
    Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
    The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
    I'm trying to record the sound from the DVD not rip the track.
    When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
    I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

  • No Sound From DVD Player

    I received my new (refurb.) 15" PB today. Everything works great except I can get no sound from Apples DVD player. CDs, iTunes, system sounds etc. all work correctly. Audo output is set to System Sound Output in DVD Preferences. Using VLC I get DVD sound but lots of dropped frame errors. Any suggestions?
    15" PowerBook   Mac OS X (10.4.5)  

    I'm having the same problem. I can play the video part of a DVD but no sound. Audio CDs and Windows sounds work fine. Does this mean I'm missing a DVD codec or is there a software setting I'm missing. The Nvidia codec costs money. Is there a free codec that will fix this? This is with Windows XP and Audigy 2 LS.
    cruzmisl wrote:
    Ok I figured it out. I downloaded the Nvidia codec and it works fine. Shouldn't all the sw be aailable with the soundcard though? I really don't want to pay $40 for a codec I do not have the spdif bypass selected.....
    Any ideas?
    Thanks,
    J.

  • Capturing from an Internal DVD player

    Hi,
    I'm using a MacBook Pro & FCE 3.5. Is it possible to capture using my laptop's internal DVD player or can I only capture using an external DVD player hooked up with firewire?
    Thanks,
    Lisa

    You can't capture from any DVD player without converting the material. It's in completely the wrong format. You can use MPEG Streamclip to convert the material to QuickTime with the DV codec.

  • New Ibook from ebay will only show power coming from battery

    Hi, just got an Ibook G4 from ebay, everything seems to work fine but when I plug it in to charge and such it doesn't recognize it as being plugged in, it still runs from the battery.
    When I went to do a software update it gave a message saying that it wasn't plugged into a power source.
    Thoughts?
    Maybe the power cord is just bad?

    brownrecluse:
    As Richard has suggested, I would begin by checking the external power supply. If you can't borrow one from a friend, take your computer down to the Apple Store and have them test it with one of their power supplies. If it charges the battery, you will need to buy a new power supply. Contact your eBay seller and tell them you got a bum power supply. They should make it good.
    If, however, a known good power supply does not charge the battery, it could be the DC-in board or some other internal issue, as Richard noted. This could be a difficult process, so I suggest contacting the seller and letting them know that you are having issues. Again, ask them to get it fixed or take the computer back and return the money. Unless you are familiar with the insides of the iBook G4, that would be the route, or else you would need to get a professional to troubleshoot and repair it.
    cornelius

  • Ibook G3 700 purchased from Ebay...loaded with 10.4, no disks

    I recently purchased an ibook 700 from ebay loaded with Tiger, however no disks were included with the computer...
    what are the problems I am going to encounter down the road, not having the install disks available?
    I don't know the admin password, and I'm assuming I can't reset it without the disks...do I need the admin password to install new programs?

    forgot to mention that I am running mostly audio apps .... voiceover production, voice recording, etc
    would like to install Logic Pro 7 on the ibook and would even be satisfied running an older version of Garageband to do one track mono recording....(I have a version of iLife 04' that I purchased a while back)
    I would do all of the production on my G4 tower which is up until now has gotten the job done....I thought the ibook would be the perfect mobile/remote recorder with a portable USB audio interface.
    do I'm pretty much all set, except a) I'm not sure if Logic Pro 7 is gonna run on the ibook and b) what's the right OS to run on this old trusty dog?

Maybe you are looking for

  • Getting error while running shell scripts

    Hi DBAS, I Have one requirement,i want connect n database dynamically by using dynamic password and execute some oracle commands,i written some script ,but while running i am getting error,please any one correct my error ,i am not able to getting err

  • How to show colmn value in the legend in ssrs Chart?

    How to display Legend values in my ssrs Report like below  I want the values like below. SuccesCount-2000 FailCount-100 No status-150 Can U pls help me for this ThanX!

  • The best way to do paging and get total rows count given a sql statement

    Hi, Just got a quick question.... what is the best way to do paging as well as the total rows count given by a sql statement. e.g. "select * from emp" 1. I need to know the total row count for this statement. 2. I also need to do a 10 rows per page..

  • Soap message to string

    hello everybody, i need to create an envelope to request some info via soap. i need to have this envelope as a string, beacuase the service i'll receives it as a string. i was checking some of the xml java libraries but the need to get the soap xml f

  • ORA-27069

    Hello, while running "ANALYZE TABLE" we got the following error stack: Errors in file c:\oracle\admin\saprod\udump\saprod_ora_4228.trc: ORA-01114: IO error writing block to file 201 (block # 524048) ORA-27069: skgfdisp: attempt to do I/O beyond the r