IBook G3 Won't Start Up It Just Goes To A Grey Screen

I tried to turn on my ibook this morning but it wouldn't boot up! I turn it on, it made the start up noise, and then it went to a grey screen with an apple in the middle of the page along with the little status gear just below the apple. When I power it on, the harddrive sounds like its trying to boot up, but if I leave it alone for a while the noise of the harddrive starting to book up stops, and the ibook just sits there with the grey screen with the apple and the little status gear thingy.
I don't understand what happened, because I was using it last night and it was working fine....
What do I do now, anyone have any suggestions, any help would be great
thanx

Hi Tigger_Rules!
See if anything HERE helps.
Specifically blank, grey screen.
If you need help with any of the instructions, please repost.
Good Luck!
ali b

Similar Messages

  • My macbook pro won't start up at all, it shows a grey screen, before this it was extremely slow. What is the problem?

    My Mac won't start up at all now, it happened again 3 weeks ago and I reinstalled OS and lost everything on my computer
    Now it happened again after it was extremely slow.. what is the problem?

    and how can I fix it without losing everything again?

  • After powering on, iBook G4 won't start up and fan goes crazy

    I closed the lid of my iBook almost all of the way, but for some reason the display turned off. I'm not sure if it went to sleep or not; I can't remember if the front light flashed or not. I pressed the power button, but it wouldn't turn back on. I think I then held down the power button and it powered on, but the fan just started going at full speed and the computer never booted up. Since then, it refuses to boot; the fan just spins at full speed and the screen stays blank. I've tried resetting the PRAM and and PMU but it wouldn't work. Usually, the fan immediately starts going, but after resetting the PMU it takes a few seconds before the fan turns on. When I first press the power button, I can feel the hard drive "click" on. Once the CD drive did made those weird noises it's supposed to make, but the rest of the time it never does even that. It also never chimes. I'd really appreciate any help or suggestions. Thanks!

    Welcome to Apple Discussions
    The display is designed to automatically go into sleep mode when you shut the lid. That part is normal.
    However, this part is not: it sounds like the wire connected to backlight on the lid is shorting out, preventing your machine from starting. The wire runs near the lid's hinge. Seems opening/closing the lid over time can cause the wire surface to degrade. Once the wire itself is exposed, the machine won't turn on if there is an electrical short.
    If this is what has happened to your machine (sure seems like it from your description) you'll have to return the machine for repair.

  • TS1367 My iMac starts up and just goes to a white screen wats going on how do I fix it

    When I turn on my iMac I just get a white screen how can I fix it

    Hey Khagenson78,
    I know you said it was white, but I found an article that sounds like it might apply to your situation. It goes over what to do if a gray screen appears during start up:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Welcome to Apple Support Communities!
    All the best,
    Delgadoh

  • My IMAC Won't boot up! (Just stops at a grey screen with the "NO" symbol)

    My IMAC will not boot up. It was working fine this morning and I was working away then suddenly a MUSIC file wouldnt play, so I restarted the computer, and this is what happens now...It starts out like normal but after a period of showing me the APPLE logo it goes to the "NO" symbol. Does anyone know what is wrong and can help me?
    Here is a video of what it is doing...
    http://youtu.be/LbSaaIGSOkA

    Go to > Mac OS X: Gray screen appears during startup

  • HT1349 My Apple MacBook Pro won't start up.  It is stuck on grey screen and I reset all of the stuff.  It still won't work also half the screen goes dark then you have to shake it till it goes back on.  Please help.

    MacBook Pro     Older version with grey keyboard

    You might have better luck posting on the Mabook Pro discussion forum, as this is the OS X Xserve server forum.
    Have you tried booting it from a DVD? If so and you find the same result, then its probably a hardware issue.

  • My 13" macbook pro isnt starting up. I goes to a grey screen and flickers between the mouse icon and then the spinning start up icon. any ideas?

    I have just updated my macbook pro 13" with requested updates and asked me to restart. Upon restarting it went to the grey startup screen where it just sticks flashing betwwen shades of grey. One shade which the mouse pointer and another shade with the start up wheel?
    Any suggestions would be a great help.

    You may be having a hardware problem that you cannot resolve on your own. Nevertheless...
    ...hold down the command and R keys whilst booting to try to get to your Recovery partition. If you can, use Disk Utility to try to Verify your boot drive (usually named "Macintosh HD" unless you've renamed it). If the verification fails, try to repair your hard drive. If everything appears to be OK, restart.
    If you can't get into your Recovery partition, your problem is likely hardware related. If so, keep your appointment and see what the Apple techs have to say.
    Clinton

  • Re: My powerbook g4 15inch went lame after a long session of nonstop use.The mac osx froze up and I had to push the power button to restart.Now when I push power it makes the start up chime then goes to a grey screen (no apple logo).

    hi there, i have a titanium powerbook G4 from a few years back, and when i turn it on, i get the apple starter screen withe logo and the spinning cycler, and then the blue bumper screen, and then NOTHING - please help!  thank you!..."

    Will it boot in Safe Mode? See What is Safe Boot, Safe Mode? (Mac OS X)
    http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://docs.info.apple.com/article.html?artnum=106214
    Will your Mac boot using the system install DVD (or another system CD/DVD)?
     Cheers, Tom

  • `my macBook Pro won't start up. Just get that gray blueshy kind of screen and don't go nowhere.

    My MacBook Pro won't start up. Just get that gray, blueishy screen and don't go on.

    Try a safe boot.
    http://support.apple.com/kb/TS2570
    This boot takes longer than a normal boot, be patient. If it boots login, and see if it seems normal. If so, logout and reboot normal.

  • My ibook G4 won't start it shows black screen and loud fan sound only

    my ibook G4 won't start, after you press the on key it makes a loud air sound, almost like a kernel panic sound, no screen light just the sound, it will turn off by pressing the on key again. Is there anything I can do to get it on?

    Your very welcome.
    You would need to apply pressure to the left side of the track pad about 2cm out. I found applying pressure to both sides of the track pad more successful. All you have to do is push down on the case, while making sure your iBook is on a flat surface. If you have someone willing to help you, you can get them to apply the pressure while you back up your files. Other methods would involve tempory repair or removal of the hard drive. If you remove the hard drive to be read by another computer, you would need a cady to put the drive into. These caddies are cheap enough. Would suggest you use a USB cady and plug your drive into that, which would act as USB external drive. I'd suggest you get a USB cady to remove your files, be careful to what operating system you have on the computer you are using to get the files off. Windows OS won't read a MAC OS X drive (extended journal format) It would need to be another  Mac or a Linux PC.
    If removing the hard drive is something your not to confident in doing, you could alway pay a computer repair shop to remove it for you. (Maybe they would have a USB cady for a 2.5 IDE hard )
    Here is a link giving further details about this chip solder problem.
    http://macintoshhowto.com/hardware/how-do-i-get-my-broken-g4-ibook-fixed.html
    Here is an example of a USB cady
    http://www.amazon.com/SANOXY-External-Enclosure-Case-Laptop/dp/B000FNBYKW/ref=sr _1_sc_13?ie=UTF8&qid=1338742155&sr=8-13-spell
    Let's hope just applying enough pressure is enough to get your files back up.
    Best of luck!

  • Ibook G4 won't start - beeps 4 times-flashes 5 times

    My ibook G4 won't start - beeps 4 times-flashes 5 times. It has been working great - I installed 1 gig ram and new hard drive last week and pro tools. It has run for a week great then this. Very Frustrated.

    to whom ever may read this.
    I took the keyboard off and made sure the ram was secure ( took it out and stuck it right back in) and everything SEEMS to be working. (maybe it got knocked loose from when they inatlled the Hard drive - which was done after the ram installation - or just got bumped) - If any one has had these problems I would still like to know how you solved them - this was very scary!!!

  • IBook G4 won't start up, can't find HD

    My iBook won't start up. It gets to the grey apple screen and nothing else happens. Sometimes when I try to start up I briefly get the icon with the question mark inside a folder.
    I tried reseting the PMU and nothing happened. I instaled the MacOS 10.4 installer CD starting up from the CD, tried disk utility but says it cannot repair disk. As a last resort I figured trying to reinstal OS X but in does not find the hard drive.
    I'm kind of desperate. Would love to save some files but I'm also open to any suggestions.
    Thanks in advanced.

    HI Tanya,
    Go here for help with the flashing question mark: http://support.apple.com/kb/TS1440
    The flashing question mark indicates that when you boot the iBook it can't find the drive to boot from... Shut down your Mac. While holding down the C key, press the power button, and insert your restore disk all at the same time. Keep holding the C key until you see the Apple logo on the screen. An Installer window will open, select English. From the Menu Bar, select Utilities/Startup Disk. When that window opens, select MacintoshHD 10.x.x and click Restart. It can take a minute or two for your Mac to find the startup volume, have patience.
    The reason it can't repair the disk is because it couldn't find the start up volume to repair. If you can get it to boot into the hard disk, you can then run Disk Utility from the restore disk and check for any errors and repair them.
    Carolyn

  • HT1379 Guys please help? My MacBook Pro won't start up. I have tried the resetting Mac's PRAM and NVRAM procedure with no success. All I see is just the black or grey screen although I hear the drive running.

    Guys please help? My MacBook Pro won't start up. I have tried the resetting Mac's PRAM and NVRAM procedure with no success. All I see is just the black or grey screen although I hear the drive running.

    Hold shift key down while booting should get you in
    go through this list and get back with me
    Step by Step to fix your Mac

  • Ibook G4 - won't start up, spins, and shuts down... disk utility repair...

    ibook G4 - won't start up, spins, and shuts down... disk utility repair quits. says "invalid sibling link" "volume check failed" "1 volume could not be repaired because of an error" "the underlying task reported failure on exit"
    any ideas about how to start and/or recover data ??
    thanks

    Hi chesterday, and a warm welcome to the forums!
    You must repair the HD, your best bet is DiskWarrior from Alsoft...
    http://www.alsoft.com/DiskWarrior/
    You'll need the CD though.
    Unfortunately, Disk Utility can't fix all that much, and the only other Apple Options are erasing the HD, or installing OSX to a second drive, then using Migration Assistant to move stuff over to the new HD.

  • My ibook g4 won't start anymor from the harddisk. so I tried to reinstall the system from the orginial system cd. Doesn't work. It says the system cd is damaged. What should I do?

    my ibook g4 won't start anymor from the harddisk. so I tried to reinstall the system from the orginial system cd. Doesn't work. It says the system cd is damaged. What should I do?

    I would question that error message if the Mac OS X 10.5 DVD doesn't work, either.
    What error message(s) did you get with the Mac OS X 10.5 DVD? Is the Mac OS X 10.5 DVD the full retail install DVD, an upgrade DVD, or a DVD that came with another Mac?

Maybe you are looking for

  • Erratic behaviour. Kernel Panic. RAM problem? HDD? iBook blues..

    I dont know what's wrong with my iBook. At first, safari kept on crashing. I deleted plists (Safari prefs files) and Safari ran again using new default plists... for awhile. Then it crashed and wouldnt start at all. Then I got my first kernel panic (

  • DVD player dvp-ns300

    I have your DVP-NS300 DVD Player hooked up to my onkyo receiver using the digital optical output line and also the video line.  I am able to play a musical dvd with sound and video, but movie dvd shows picture and no sound.  How do I get sound for dv

  • How to create data_block from procedure ?

    hi all can anyone to help me : how to create data_block from procedure ? i want to join 2 or 3 table and use order by then show some field in my form i can not use view because order by can not use in view please send sample code for this procedure t

  • Iphone 4s Purchased in USA is not supporting after IOS 8.0

    I have brought unlocked Iphone 4s from US, two year before. I have inserted a SIM AIRCEL, Vodafone, Idea same was working fine. But 15days before when I have received update for IOS 8.0. I have updated same IOS but now i am not able to receive any se

  • Steffinhillboy has a question about Photoshop Elements 6

    I am working in Photoshop Elements7 and edited some photos and thought I saved and exited properly but now the photos still have a RED LINE Through them with  a lock symbol and the words EDIT IN PROGRESS can anyone tell me how to get rid of the red l