Ibook g3
I'm looking for a laptop to take on infrequent trips to check emails and download podcasts. I use a new imac for most of the heavy stuff.I've heard so many bad things about the g3s I'm afraid to buy one,but for such light use I don't want to buy a g4. Thanks
If you don't want to buy an iBook G4, but you want an iBook, that doesn't leave you much choice except to take a chance on a G3.
If you want to run Tiger, I'd advise buying an iBook G4.
As I post this, there is a refurbished iBook G4 available at the online Apple Store. Scroll down on the main Store page, look on the left side of the page under "Special Deals" > "Refurbished Macs" and click on the link and you will find:
Refurbished iBook G4 1.2GHz/ 256MB/ 30GB/ Combo/ AP Extreme Card/ E/ 56K/ 12-inch TFT for $719.
This would give you the opportunity to purchase AppleCare and have a three-year warranty, including the logic board and hard drive. I would recommend bumping up the RAM with a 512 MB or 1 GB RAM module for 768 MB or 1.25 GB of total RAM. You can never have too much RAM. This model iBook would have shipped with OS X 10.3 (Panther).
If that's beyond what you want to pay, and you're looking on eBay, look for an iBook whose RAM has been expanded to at least 512 MB. If you want to use OS X 10.4 Tiger, look for at least a 900 MHz G3 iBook (for the 40 GB standard hard drive). Make sure the original system discs are included because you will need them for maintenance. Also, if someone has kept track of the discs, they are more likely to have taken good care of the iBook. Avoid buying from someone who refurbishes them to sell them on eBay. These places often buy iBooks by the pallet-load from schools. That's not an ideal source for a used iBook (and they almost never have the system discs included in the sale).
Also, look for an iBook that already has the AirPort card installed (original AirPort card for a G3; AirPort Extreme card for a G4). Once you have a portable, you're not going to want to be tied down with an Ethernet or modem cable.
If you're buying used, you can ask if the logic board has been problematic in the past, but as the prospectus for a mutual fund states, "Past performance is no guarantee of future performance."
The logic board problem is seen a lot here, but for every post about one gone bad, there are many, many users happily iBooking away without a care in the world, never knowing about the iBook logic board problem and the iBook Logic Board Repair Extension Program. I don't think you should let fear of the logic board problem keep you from (carefully) buying a G3 Dual USB iBook. We have three of them, and only one of the three has had logic board problems (but that one has been back three times for the repair).
Once you have a portable, you're not going to want to be without one. I love mine, and only use the desktop when I have to do so.
Good luck.
Similar Messages
-
How To Connect My PB To An iBook...
My cousin just bought a new ibook - I'll be going to over to help him set it up and it would be nice to transfer some of the family pics / files I have on my powerbook over to his machine to load up into iphoto etc.
I'd like to find a way of connecting the two 'books so that both are still useable... I'm hoping that simply connecting the two via a firewire cable will create some sort of mini-network?... but that sounds to easy...
I'm trying to avoid 'target disk mode' as this means one of the 'books will have to be inactive... he currently hasn't gone live on broadband - although it is imminent...
If anyone has any advice / help it would be much appreciated.
Thanks in advance."I'm hoping that simply connecting the two via a firewire cable will create some sort of mini-network?... but that sounds to easy..."
But it is that easy. Network the iBook and PowerBook via IP over FireWire:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1845.html
PowerBook G4 (15 FW800); 17 iMac G5; Mac mini 1.42 Mac OS X (10.4.3) -
What do i buy to hook up my ibook....
what do i buy to hook up my ibook g4 into my tv using the A/V plug??
do i hook up the --(Apple Mini-DVI to Video Adapter) to my ibook then hook up the --(Apple AV Cable for iBook) to the adapter??....
thanks for the help...You need to use the Apple Video Adapter M9109G/A to get a video signal.
Then you just need a male-to-male video patch cable to connect the adapter to your TV. -
How can I stop shared files in iBooks being highlighted by different family members?
I Have family sharing set up which is great for sharing apps and music however I have a problem with iBooks. My wife and I both use ePub files which a re study material. The great thing about these is that we can highlight and add notes to files.
THe problem is that our individual highlights and notes are shared with each other. So I get my wife's highlights and notes on top of mine.
We ha ve tried clearing all ePub files from my wife's ipad, and only syncing them to mine. She then downloads her own copy of the ePub file. So one has the original which is on our iMac and one has another copy. This makes no difference as iTunes recognises them as the same file.
We'd be happy to switch off family sharing for iBooks to prevent this but that doesn't seem possible. It's all or nothing. I can't turn off family sharing completely as my wife will lose access to our shared music library.
Does oes anyone have any suggestions? Basically, we want to share music and apps through family sharing but have a separate collection of books even though those books might be ide bridal before we annotate them.Have you tried going into the Preferences on iBooks on your Mac and unchecking the option for syncing across devices?
-
I am in the process of authoring an eBook using iBook Author. The project is a work in progress and I want to share the draft with other collegues. We each have our own iPads synced with other computers and we have different iTunes acounts. I attempted to preview the book on the new iPad, but the iPad did not come up in the available device window.
Am I missing something or is there a way around this?How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495 -
How can I transfer my iPad iBooks to iTunes library?
I'm having a problem getting my iPad books into my mac and I really could use some help. The situation is, my mac got stolen a few months ago and I finally could get a new one. I also have an iPad, where I had thankfully stored all my iBooks. They're backuped to iCloud cause I could restore them to said iPad (using iOS 6) just using my Apple id. But most of them weren't bought at the iTunes store but downloaded from other places. The only thing I can see in iTunes (v. 11.0.2) when I connect the iPad is the ones I bought at the iTunes Store. How do I do to get my old ones in iTunes and (now that I know how hard this is) in my mac to do another backup somewhere else than in iCloud?
Has someone done this before and could help me? I've been looking for it for hours and I can't seem to find a solution. I'd be very grateful if someone could point me out in the right direction. I mean, they're there! How do I get them? Help!Thank you. That would have worked too, but before getting the answer I found another solution: what I finnaly did was use Detunes to copy my books from the iPad. It was quite fast too. Any of those could have worked quite nicely.
-
Can I move an ibook author file from one device to another?
I have ibook Author on my Macbook and my Mac Mini. If I start a project on my Macbook, is it possible to transfer the incomplete file to my Mini (where all my pictures and charts are stored) later to complete it?
~~ ChikanaJust like any other file, save your book where you can find it - it will have the suffix .iba
Move that file, however you like, to your other computer and continue there. -
When I try to make a purchase at the App Store or iBook store or at iTunes an error message tells me my account is not valid for the UK store. I've no idea how I got connected there and I'd like help getting back to Canada where I live. Any suggestions?
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done". -
Is there a way to copy all my PDfs in ibooks on my iPad?
Because I'm still sorting out an issue with ibooks on the iMac renaming files so they do not match the names on my iPad, I am wondering if there is a way to copy all the pdfs I have in ibooks on my ipad (without doing each one, one at a time) so I can save a copy in Evernote or dropbox so when I sync and update shortly, I don't loose what I have?
Thanks for any help you can offer.
MichelleThank you.Ok say for e.g.
500 video files imported in fcpx
800 clips extracted from these obviously on the timeline and joined/compounded according to their content in say 15 layers according to 15 instruments used ,so now just to see the entire usable footage ....
now one 7 minute song sequence has to be made where bits would be simultaneously taken from these 15 layers as all instruments are playing simultaneously
these shots are not more than 2 secs each according to the beat........
when I try to work with these 15 layers as well as the Final primary layer that I'm making in the same timeline my fcpx becomes slow
but when I drag individual layer to individual timelines it is fine so that is the only option
but now for every 2 second bit I have to go back to the 15 layered timeline and find one single suitable shot
So I was wondering is there a way to be able to see these layers and clips on the timeline in the browser in a systematic fashion like the way we get with keywords ?
and keywords can only be used in the imported clips already in the browser ,and not after we drag it on the timeline.....
Till now I think exporting and importing back is the only option ...but is there another work around ? -
PLEASE, PLEASE HELP ME. I'm a computer ignorant woman and need help. I have an IBOOK G4 and I was trying to fix a problem in IPhoto (which never got fixed) and took some guy's bad advice to reset iphoto or something and now my plug-ins are gone too. Or at least the one(s) that were allowing me to listen to on-line discussions and audio recordings.. Can anyone help me? I have gone to UPDATE SOFTWARE and updated Java but that is all. It's like I go to a think were there is an audio thing to listen to and there is a picture of a plug in and it says something like "Plug in not available to listen to this" and then gives you an option to download plug-in but when I do, it says something like "No Plug in was found that was useable" or something alone those lines. Then it has a manual plug-in option but when I clicked that, I entered the frustrated crying zone. Can you help? I will so give you big points! Thank you!
THis is all Greek to me, but maybe it answers your questions???? Thank you Ronda.
ATA Bus:
MATSHITADVD-R UJ-845E:
Model: MATSHITADVD-R UJ-845E
Revision: DMP2
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Internal Microphone:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Left, Right
PluginID: TAS
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
DIMM0/BUILT-IN:
Size: 512 MB
Type: Built-in
Speed: Built-in
Status: OK
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 6
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 6
Dynamic Power Step: Yes
Reduce Processor Speed: No
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Wake On Modem Ring: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 9
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 9
Dynamic Power Step: No
Reduce Processor Speed: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 466
Remaining Capacity (mAh): 466
Amperage (mA): 0
Voltage (mV): 16491
Cycle Count: 247
AC Charger Information:
AC Charger (Watts): 50
Connected: Yes
Charging: No
Hardware Configuration:
Clamshell Closed: No
UPS Installed: No -
A book I purchased from itunes store downloaded OK and shows up on my PC but does not show up in ibooks on my ipod touch. I tried manually syncing and rebooting which did not help. From the pc in the itunes store the book shows up in the purchased list. From the ipod, the purchased list from the store is empty. Actually, the book does not exist when trying to search for it at the store from the ipod. I'm confused. Any solution or suggestion?
The book is in ibooks format. The extension is ".ibooks". I did delete it from itunes and download it again from the store a few times. I tried updating my ibooks app. I even sent it to the ipod through dropbox. I looked through all the settings I could find in itunes and ipod. So far no matter what I do, ibooks does not see this book.
-
How do I add a widget to give a review or star rating for a book at the end of a book in iBooks Author? You know, how you buy books on iBooks and when you're finished reading it, there's a place where you can give a rating or review right there on the very last page?
Just supply a link that says 'Review This Book' - use http://itunes.apple.com/linkmaker/ to generate one.
-
All of a sudden using Ibooks on my Ipad - many lines in list view have this indicator || inside a circle appearing on the far right and the books no longer open. I can find nothing about this in help. What is it and what does it mean
Peter RowanHi John, I'm guessing that icon is created and updated by an extension. I'm not sure which one, though. Maybe something that is tracking the trackers, like Lightbeam? Have you tried hovering your mouse over the icon to see whether a tooltip appears, or clicking it?
-
HT4059 I can no longer read books using ibooks, i have the second gen ipod touch
what other app can i use to read books other than ibooks this app is no longer compatible with my ipod
So if you spent money on one of these two devices, its just a poke in the eye? No solution to simply wanting to read books you paid for? Is it being suggested that old ipods can't handle books? There's no possible way to make them compatible? Is Apple's solution "just buy the newer one" like everyone just has that kind of disposable income.
EDIT: my mother has this issue, and she asked me "What is the solution to problems like this?" and I replied, "Android" -
Can't print from iBook G4 via Windows XP to an HP PSC 1410
Hello,
I realize this question is very similar to others on this discussion but I haven't been able to find an answer to my problem.
I cannot print from my iBook via XP to an HP PSC 1410.
I can print from my iBook via XP to an HP LaserJet 4L.
I was able to print from my iBook via XP to an HP882C that was connected
to the same USB port that the HP PSC 1410 is connected to now.
I have an iBook G4 running 10.4.3
I have a PC running XP with an HP LaserJet 4L on a parallel port and an HP PSC 1410 on a USB port.
I installed the following from http://www.linuxprinting.org/macosx/hpijs/
hpijs-foomatic-2.02.ppc.dmg
espgs-7.07.1.ppc.dmg
HP-PSC_1400-hpijs.ppd
I think I correctly followed the instructions at:
http://www.ifelix.co.uk/tech/3015.html
They worked for the LaserJet printer.
When I attempt to print from the iBook to the 1410 the HP doesn't print at all.
I don't see any error messages on the iBook. The document gets spooled onto the Windows print spooler, the printer even starts making noises, the print heads move about a bit and then stop. The print job just sits there in the queue with a status of "Printing". The print job is then stuck and hard to delete.
I don't need to be able to scan or check ink levels from the iBook.
I would just like to be able to do color printing.
What else should I try? Given the symptoms where might I be going wrong?
Any suggestions would be appreciated.
iBook G4 Mac OS X (10.4.3) 1 Gig RAMI found the answer to this problem on Linux printing provided by Steve Stuart.
Dave
Steve Stuart wrote at: http://www.linuxprinting.org/forums.cgigroup=linuxprinting.macosx.general;articl e=1446
Hi all,
I finally figured out what the issue was, Why it fixes it I can not say,
but it does.
On the Shared printer on the Windows side, go to the properties of the Printer.
Go to the Ports tab, and deselect the "Enable bidirectional Support" (do not
have it checked). Once this is done and you also do not have any firewalls
setup on the Windows machine (Windows, MCAfee, Norton, ....). You should be
able to print.
Finally!!!!! I hope this helps many many people. As I have had many
people asking for the solution if I found it.
Thanks,
Steven Stuart -
When I send a pdf as an attachment from my windows pc to the ipad via outlook mail there are occasions when the pdf is open on the email and not as an attachment which means I cannot store this on ibooks, any suggestions.
If the document is already open then, if you touch and hold in the body of the document, you will be given a set of options. One of these is to "Open in iBooks".
Maybe you are looking for
-
Voice memo is always canceled automatically
My iphone is 5s,brand NEW But I found a problem is that my voice memo is always canceled automatically. When I started to record,it can record for few seconds,and then it is canceld and jumped back into the desk. After I restart iphone or the voice m
-
Journal Import - Reference 6 field
We have recently upgraded from R11.5.10 to R12.1.3. We are uploading Journal Entries using GL_INTERFACE table from extrnal sources. We are populating Reference1 'Batch Name', Reference4 'Journal Name' & Reference6 'External reference id'. While runni
-
Safari 5 blocks unused ports by default, like most browsers. However Firefox and Chrome allow for configurations to open these ports if they need to be used. My new employer uses multiple ports on a single domain for development purposes. Does anyone
-
Conntrans u2013 initialization error and Client console show no inbound queue
Hallo, I installed Communication station and Client application to two computers. Test from Communication station to CRM is OK, test from client to Communication station is OK too. When I run Conntrans it show: u201CError during Conntrans initalizati
-
Output processing from sales documents - t-code?
Hi, Can anyone tell me the t-code to process outputs from sales documents - order confirmations from sales orders. The one that i can use to set up a variant to use in a background job. Similar to VF31 for billing, VT70 for shipments etc. I am unable