Ibook g4 and intel

will there be an intel processor coming out for the iBook G4 so that a windows based operating system can be used on it????

Yeah you could say that ... the last count I saw was that there were just under 10000 known viruses for PC and ......ummmm 1 for OS X!
OSX is built on Unix which is inherently more secure. Also there are less Macs around - and less people who hate Apple than who hate Microsoft, so they are not as much of a target.
It was the virus situation that made me switch to Macs initially - although I now wish I'd done it 10 years ago. I used to Sell, repair and build PCs, but my life became one long string of people phoning me with a problem concerning a PC I'd sold them - which, 95% of the time turned out to be Virus or Spyware instigated.
If you put an unprotected PC on the internet, it will last around an average of 20 minutes before it gets a virus fron one of those IP address worms that just send themselves to random addresses from infected computers. Also programs like Norton take over the PC so much that they make it run like it has a virus anyway. (AVG is best if you need virus protection for your XP partition)
If anyone is thinking of installing Boot Camp it's probably because they want to either play games (which Windows has an uncontested lead in) or they need some program that's WIndows only. Keep it off the net in XP mode if you can.
Someone here recommended 'Parallels' as program that can run Winows in an ... ummm a Window in OSX (which Boot Camp can't). I've tried it and must admit it's great if you just want to run an XP (or any other OS) application. Very impressive - and very cheap to buy too - but no good for games. Let's me run the only Microsoft program I ever liked - Publisher.

Similar Messages

I have an iBook G4 and iTunes is no longer updating. The last update is 9.2.1 but it doesn't support my iPhone or iPad. Is there anything I can do to update iTunes or is my only recourse to update my laptop?

I have an iBook G4 and iTunes is no longer updating. The last update is 9.2.1 but it doesn't support my iPhone or iPad. Is there anything I can do to update iTunes or is my only recourse to update my laptop?

As Niel has suggested Mac OS X 10.5 Lepaord.
But first of all make sure that your iBook is above 800Mhz and you have at least 512 Meg of memory. (1 GB recommended)
Please note, that if you do install Mac OS X 10.5 on your iBook, it will not allow you to install the latest version of iTunes version 11. The most recent version of iTunes that can be installed would be 10.5, which will be compatible with your iPod touch 4th gen, provided it's not been updated to iOS 6.
Sadly you can't install any version of Mac OS X above 10.5 Leopard, as it they requires an Intel processor, which your iBook G4 does not have.
Hope this helps.

I have just bought an iBook G4 and need to know can I install iWorks 09?

SOS Helpppppppp
I have just purchased iBook G4 and really need to have iWorks on this machine, can I install iWorks09 on it??? plus any handy tips for the iBook would be much appreciated.
Thanks in advance

Mac computer with an Intel, PowerPC G5, or PowerPC G4 (500MHz or faster) processor
512MB of RAM; 1GB recommended
32MB of video memory
Mac OS X v10.4.11 or Mac OS X v10.5.6 or later
QuickTime 7.5.5 or later
1.2GB of available disk space
DVD drive required for installation
If you Mac meets these specs then yes.
Allan

Non-Apple iBook batteries and how this affects the warranty

I have a 14" G4 iBook (not eligible for the Apple battery replacement program) in which the original battery is clearly dying after almost two years of heavy use. There are vendors out there selling non-Apple replacement iBook batteries, and some make claims that they outperform the Apple batteries. What's Apple's position on this in regards to the warranty; i.e., would simply installing a third party battery void the warranty if some other component went bad, or would there have to be some obvious cause and effect relationship?
Does anyone have any experience with non-Apple batteries or a vendor you could recommend?
Thank you,
Doug R.
iBook G4 14 in 1.33 Mhz Mac OS X (10.3.9)
IMac 1.83 Ghz Intel Core Duo Mac OS X (10.4.6)

Douglas,
As Apple's policy is not something one can discuss here (see the Terms of Use on the right), your best bet is to ask the question of AppleCare directly. This is just a user to user forum.

Please help me. I have an IBook g4 and I've somehow lost plugins that I need to listen to webcasts etc. I've tried to download them when it signifies to "download appropriate plugin" or whatever it says, and when i hit the button, it says "no suitable...

PLEASE, PLEASE HELP ME. I'm a computer ignorant woman and need help. I have an IBOOK G4 and I was trying to fix a problem in IPhoto (which never got fixed) and took some guy's bad advice to reset iphoto or something and now my plug-ins are gone too. Or at least the one(s) that were allowing me to listen to on-line discussions and audio recordings.. Can anyone help me? I have gone to UPDATE SOFTWARE and updated Java but that is all. It's like I go to a think were there is an audio thing to listen to and there is a picture of a plug in and it says something like "Plug in not available to listen to this" and then gives you an option to download plug-in but when I do, it says something like "No Plug in was found that was useable" or something alone those lines. Then it has a manual plug-in option but when I clicked that, I entered the frustrated crying zone. Can you help? I will so give you big points!   Thank you!

THis is all Greek to me, but maybe it answers your questions???? Thank you Ronda.
ATA Bus:
MATSHITADVD-R   UJ-845E:
Model:    MATSHITADVD-R   UJ-845E
Revision:    DMP2
Serial Number:
Detachable Drive:    No
Protocol:    ATAPI
Unit Number:    0
Socket Type:    Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Internal Microphone:
Controls:    Left, Right
Playthrough:    No
PluginID:    TAS
Headphones:
Controls:    Mute, Left, Right
PluginID:    TAS
Internal Speakers:
Controls:    Mute, Left, Right
PluginID:    TAS
Formats:
PCM 16:
Bit Depth:    16
Bit Width:    16
Channels:    2
Mixable:    Yes
Sample Rates:    32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth:    24
Bit Width:    32
Channels:    2
Mixable:    Yes
Sample Rates:    32 KHz, 44.1 KHz, 48 KHz
DIMM0/BUILT-IN:
Size:    512 MB
Type:    Built-in
Speed:    Built-in
Status:    OK
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    6
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    6
Dynamic Power Step:    Yes
Reduce Processor Speed:    No
Automatic Restart On Power Loss:    No
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Wake On LAN:    No
Wake On Modem Ring:    Yes
Display Sleep Uses Dim:    Yes
Battery Power:
System Sleep Timer (Minutes):    9
Disk Sleep Timer (Minutes):    10
Display Sleep Timer (Minutes):    9
Dynamic Power Step:    No
Reduce Processor Speed:    Yes
Automatic Restart On Power Loss:    No
Wake On AC Change:    No
Wake On Clamshell Open:    Yes
Wake On Modem Ring:    No
Display Sleep Uses Dim:    Yes
Reduce Brightness:    Yes
Battery Information:
Battery Installed:    Yes
First low level warning:    No
Full Charge Capacity (mAh):    466
Remaining Capacity (mAh):    466
Amperage (mA):    0
Voltage (mV):    16491
Cycle Count:    247
AC Charger Information:
AC Charger (Watts):    50
Connected:    Yes
Charging:    No
Hardware Configuration:
Clamshell Closed:    No
UPS Installed:    No

Apple Releases Security Update 2006-004 (PowerPC and Intel)

From Macfixit................
Apple has released Security Update 2006-004 for Mac OS X in both PowerPC and Intel versions. This update requires Mac OS X 10.4.7 for either PowerPC or Intel, Mac OS X 10.3.9 or Mac OS X 10.3.9 Server.
This is the fourth major standalone security update for Mac OS X released this year.
Update procedure recommendation First, avoid performing any other operations (in Mac OS X or third-party applications) while the update process is occurring. In addition, before installing this security update, make sure all Apple-installed applications and utilities are in their original locations. Moving one of these applications to a different location on your hard drive can lead to an incomplete update. Also, disconnect any FireWire/USB devices before applying the update (except for your startup drive, if it is FireWire or USB, and your keyboard/mouse), then re-connect the devices one by one (checking for issues created by any particular device) after the update process is complete and the system has restarted.
Enhancements in this release
Of most interest to general end-users:
a fix that prevents maliciously crafted Zip archives from causing condition where arbitrary code can be execute. In other words, prior to Security Update 2006-004 you could download a specially crafted file ending in .zip from a Web site or other location, and it could trigger the execution of malicious code.
a fix that disallows maliciously crafted Canon RAW images from creating a buffer overflow, potentially leading to arbitrary code execution. Prior to Security Update 2006-004, you could download or otherwise receive a Canon RAW file that could allow execution of malicious code on your system.
similar to the above, a fix that prevents maliciously crafted GIF images from causing an integer overflow, potentially leading to arbitrary code execution.
new download validation that will catch certain HTML files defined by Safari as "safe" that may actually contain malicious JavaScript code. After applying Security Update 2006-004, these files will not be automatically opened.
Protection against maliciously crafted HTML documents that can also open the door for arbitrary code execution by accessing deallocated objects.
A full list of enhancements is as follows:
AFP Server
An issue in the AFP server allows search results to include files and folders for which the user performing the search has no access. This may lead to information disclosure if the names themselves are sensitive information. If the permissions of the items allow it, the contents may also be accessible. This update addresses the issue in Mac OS X v10.3.9 by ensuring that search results only include items for which the user is authorized. For Mac OS X v10.4 systems, the issue was addressed in Mac OS X v10.4.7. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9:
The AFP server contains an integer overflow that can be triggered by an authenticated user. A malicious user with access to the AFP server may be able to cause a denial of service attack or arbitrary code execution with system privileges. The AFP server is not enabled by default on Mac OS X. This update addresses the issue by performing additional validation. Credit to Dino Dai Zovi of Matasano Security for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
On Mac OS X Server, the AFP server supports reconnection of file sharing sessions after a network outage. The storage of reconnect keys is world-readable. It may be possible for an authenticated local user to read the reconnect keys, use them to impersonate another user over AFP, and access files or folders with the privileges of the impersonated user. This update addresses the issue by protecting the reconnect keys with appropriate file system permissions. This issue only affects Mac OS X Server. Available for: Mac OS X Server v10.3.9, Mac OS X Server v10.4.7.
An unchecked error condition exists in the AFP server that may lead to a crash. By carefully crafting an invalid AFP request, an attacker may be able to trigger this condition and cause a denial of service. This update addresses the issue by handling the formerly unchecked error condition. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7
Bluetooth
The security of the Bluetooth Setup Assistant has been improved in this update for Mac OS X v10.4.7. The length of the automatically generated passkey used for pairing has been increased from six characters to eight characters. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
Bom
An issue in Bom's compression state handling may cause heap corruption. By carefully crafting a corrupt Zip archive and persuading a victim to open it, an attacker may be able to trigger this condition which could lead to an application crash or arbitrary code execution. Note that Safari will automatically open archives when "Open `safe' files after downloading" is enabled. This update addresses the issue by properly handling such malformed Zip archives. Credit to Tom Ferris of Security-Protocols.com for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
DHCP
A stack buffer overflow exists in bootpd's request processing. By carefully crafting a malicious BOOTP request, a remote attacker may be able to trigger the overflow and cause arbitrary code execution with the privileges of the system. Note that bootpd is not enabled by default in Mac OS X, and must be manually configured in order to be enabled. This update addresses the issue by performing additional bounds checking. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
dyld
Malicious local system users may specify dynamic linker options that cause output to standard error. This output contains informational content and potentially user-specified content. As a result, privileged applications that parse or reuse standard error may be influenced inappropriately. This update addresses the issue by ignoring the problematic dynamic linker options in privileged applications. Credit to Neil Archibald of Suresec LTD for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
An improperly handled condition in the dynamic linker may lead to including dangerous paths when searching for libraries to load into privileged applications. As a result, malicious local users may cause the dynamic linker to load and execute arbitrary code with elevated privileges. This update addresses the issue by properly selecting search paths when executing privileged applications. Credit to Neil Archibald of Suresec LTD for reporting this issue. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
fetchmail
Several issues in the fetchmail utility were discovered. The most serious issue could lead to arbitrary code execution when fetching mail from a malicious POP3 mail server. All issues are described at the fetchmail website (fetchmail.berlios.de). This update addresses the issues by updating fetchmail to version 6.3.4. In addition, fetchmail is no longer distributed as a privileged utility. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
gunzip
A race condition may allow a malicious local user to modify the permissions of files owned by another user executing gunzip. This issue is only exploitable when executing gunzip on files in directories that are modifiable by other users. This update addresses the issue by properly handling files while decompressing. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
A directory traversal vulnerability is present in the command line utility gunzip when it is used with the non-default "-N" option. By carefully crafting a malicious compressed file and persuading a user to open it with "gunzip -N", an attacker may replace or create arbitrary files with the privileges of the victim. This update addresses the issue by properly stripping paths from files when decompressing. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7
Image RAW
By carefully crafting a corrupt Canon RAW image, an attacker can trigger a buffer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of Canon RAW images. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7.
ImageIO
By carefully crafting a corrupt Radiance image, an attacker can trigger an integer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of Radiance images. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
By carefully crafting a corrupt GIF image, an attacker can trigger an undetected memory allocation failure which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of GIF images. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7.
By carefully crafting a corrupt GIF image, an attacker can trigger an integer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of GIF images. This issue does not affect systems prior to Mac OS X v10.4. Credit to Tom Ferris of Security-Protocols.com for reporting this issue. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
LaunchServices
Download Validation may erroneously identify certain files containing HTML as "safe". If such a file is downloaded in Safari and Safari's "Open `safe' files after downloading" option is enabled, the HTML document will automatically be opened from a local URI. This would allow any JavaScript code embedded in the document to bypass access restrictions normally imposed on remote content. This update provides additional checks to identify potentially malicious file types so that they are not automatically opened. This issue does not affect systems prior to Mac OS X v10.4. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
OpenSSH
Attempting to log in to an OpenSSH server ("Remote Login") using a nonexistent account causes the authentication process to hang. An attacker can exploit this behavior to detect the existence of a particular account. A large number of such attempts may lead to a denial of service. This update addresses the issue by properly handling attempted logins by nonexistent users. This issue does not affect systems prior to Mac OS X v10.4. Credit to Rob Middleton of the Centenary Institute (Sydney, Australia) for reporting this issue. Available for: Mac OS X v10.4.7, Mac OS X Server v10.4.7
telnet
When connected to a TELNET server, the client may send the contents of arbitrary environment variables to the server if the server requests them. Some environment variables may contain sensitive information that should not be sent over the network. This update addresses the issue by ensuring that only non-sensitive variables and variables that the user has explicitly requested are are shared with the server. Credit to Gael Delalleau and iDEFENSE for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7.
WebKit
A maliciously-crafted HTML document could cause a previously deallocated object to be accessed. This may lead to an application crash or arbitrary code execution. This update addresses the issue by properly handling such documents. Credit to Jesse Ruderman of Mozilla Corporation for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7
AppKit, ImageIO
Buffer overflows were discovered in TIFF tag handling (CVE-2006-3459, CVE-2006-3465), the TIFF PixarLog decoder (CVE-2006-3461), and the TIFF NeXT RLE decoder (CVE-2006-3462). By carefully crafting a corrupt TIFF image, an attacker can trigger a buffer overflow which may lead to an application crash or arbitrary code execution. This update addresses the issue by performing additional validation of TIFF images. Systems prior to Mac OS X v10.4 are affected only by the TIFF NeXT RLE decoder issue (CVE-2006-3462). Credit to Tavis Ormandy, Google Security Team for reporting this issue. Available for: Mac OS X v10.3.9, Mac OS X Server v10.3.9, Mac OS X v10.4.7, Mac OS X Server v10.4.7./

Right after installing Security Update 2006-004 (Intel) on my macbook pro I am having troubles with my wireless connectivity. Here is the dump from the console:
Aug 3 15:49:43 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: WirelessAssociate2() = 88001006 for network RadioActive
Aug 3 15:49:43 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: (had password)
Aug 3 15:49:51 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: WirelessAssociate2() = 88001006 for network RadioActive
Aug 3 15:49:51 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: (had password)
Aug 3 15:49:59 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: WirelessAssociate2() = 88001006 for network RadioActive
Aug 3 15:49:59 x-ray /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Error: (had password)
I can reboot and it will work, but if I put my macbook to sleep it, when I wake it, it will do the same thing again.
I am also getting timeouts waiting for results of 1st wireless scan to complete in console.
Anyone else having this issue?
MBP15-2GHZ Mac OS X (10.4.7)

I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks

I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks

If your iPhone can't be updated to a higher iOS version then the only way to get them is if you downloaded versions of them which were compatible with iOS 4.2.1 and you still have copies of those versions somewhere e.g. on your computer or on a backup - only the current version of each app is available in the store, and as apps (and other content) are tied to the account that downloads them, you will need to have older copies that are linked to your id

Performance decrease with xorg 1.6 and intel

i have a box with
gigabyte ga-8ig1000mk mainboard
intel 865G graphics
celeron 2.6 cpu
512 M ram
arch linux
x does not start with xorg 1.5/intel or xorg 1.6/intel (video memory related error message)
kde 4 performance with xorg 1.6/intel-legacy is noticably lower than with xorg 1.4/intel
glxgears in its default window size gives 460 fps with xorg 1.4/intel and 300 fps with xorg 1.6/intel-legacy
currently the only way to have xorg 1.4 is
IgnorePkg = xf86-video-intel
IgnorePkg = intel-dri
IgnorePkg = glproto
IgnorePkg = xcb-proto
IgnorePkg = libxcb
IgnorePkg = libx11
IgnorePkg = dri2proto
IgnorePkg = libdrm
IgnorePkg = mesa
IgnorePkg = libgl
IgnorePkg = libxdamage
IgnorePkg = damageproto
IgnorePkg = xcb-util
IgnorePkg = gtk2
IgnorePkg = pango
IgnorePkg = libthai
IgnorePkg = libxinerama
IgnorePkg = libxcursor
IgnorePkg = libxklavier
IgnorePkg = xkeyboard-config
IgnorePkg = libxi
IgnorePkg = libxext
IgnorePkg = libx11
IgnorePkg = libxcb
IgnorePkg = xcb-proto
IgnorePkg = xextproto
IgnorePkg = inputproto
IgnorePkg = cairo
IgnorePkg = libpng
IgnorePkg = pixman
IgnorePkg = xf86-input-keyboard
IgnorePkg = xf86-input-mouse
IgnorePkg = xf86-video-vesa
IgnorePkg = libfontenc
IgnorePkg = freetype2
IgnorePkg = fontsproto
IgnorePkg = libxfont
IgnorePkg = xproto
IgnorePkg = xorg-font-utils
IgnorePkg = xorg-fonts-encodings
IgnorePkg = xorg-fonts-alias
IgnorePkg = expat
IgnorePkg = fontconfig
IgnorePkg = xorg-fonts-100dpi
IgnorePkg = xorg-fonts-75dpi
IgnorePkg = libxau
IgnorePkg = libxdmcp
IgnorePkg = xcb-proto
IgnorePkg = libxcb
IgnorePkg = kbproto
IgnorePkg = inputproto
IgnorePkg = bigreqsproto
IgnorePkg = libx11
IgnorePkg = xextproto
IgnorePkg = libxext
IgnorePkg = libice
IgnorePkg = libsm
IgnorePkg = libxt
IgnorePkg = libxmu
IgnorePkg = libxpm
IgnorePkg = printproto
IgnorePkg = libxp
IgnorePkg = libxaw
IgnorePkg = xorg-res-utils
IgnorePkg = libxkbfile
IgnorePkg = libxkbui
IgnorePkg = xf86miscproto
IgnorePkg = libxxf86misc
IgnorePkg = xf86vidmodeproto
IgnorePkg = libxxf86vm
IgnorePkg = xcursor-themes
IgnorePkg = xorg-xkb-utils
IgnorePkg = xkeyboard-config
IgnorePkg = fontcacheproto
IgnorePkg = libxfontcache
IgnorePkg = libxi
IgnorePkg = liblbxutil
IgnorePkg = renderproto
IgnorePkg = libxrender
IgnorePkg = randrproto
IgnorePkg = libxrandr
IgnorePkg = trapproto
IgnorePkg = libxtrap
IgnorePkg = mcpp
IgnorePkg = xtrans
IgnorePkg = xorg-server-utils
IgnorePkg = xf86dgaproto
IgnorePkg = libxxf86dga
IgnorePkg = recordproto
IgnorePkg = libxtst
IgnorePkg = xineramaproto
IgnorePkg = libxinerama
IgnorePkg = videoproto
IgnorePkg = libxv
IgnorePkg = dmxproto
IgnorePkg = libdmx
IgnorePkg = libxft
IgnorePkg = xorg-utils
IgnorePkg = libdrm
IgnorePkg = xorg-fonts-misc
IgnorePkg = pixman
IgnorePkg = xbitmaps
IgnorePkg = xorg-server
IgnorePkg = xorg-twm
IgnorePkg = xorg-xauth
IgnorePkg = xorg-xinit
IgnorePkg = fixesproto
IgnorePkg = libxfixes
IgnorePkg = libxcursor
IgnorePkg = libpng
IgnorePkg = xorg-apps
IgnorePkg = xterm
i want a better solution
Last edited by ash (2009-04-19 22:48:49)

you do not need nearly as many packages on hold. Haven't logged into my 32-bit arch install for a month now, but I've maintained a xorg 1.4 install with this line just fine:
IgnorePkg = xf86-video-intel xf86-input-evdev xorg-server xorg-apps xorg-xkb-utils xorg-server-utils xorg-utils intel-dri synaptics libgl libdrm xorg-res-utils xf86driproto xf86-input-keyboard xkeyboard-config
That said, I expext to upgrade next time I use it (probably to play around with some fast boot). I would look into troubleshooting with the latest xorg and intel driver as it really should work, if I were you. I presume you have already tried starting x without a xorg.conf as a baseline test with those versions?

[SOLVED] Blinking screen - new Xorg and Intel issue

Screen is blinking after opening laptop lid no matter what i did (nothing, lock screen, hibernate, standby). It blinks every 10-20 seconds for about 1-2 seconds, and cpu% used by X's raises from 0.3-1.0 to even 10% and system slows down a little in that moment. My Xorg logs:
$ cat /var/log/Xorg.0.log
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
# closing & opening laptop lid
# right after opening (properly i suppose)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "CMO", prod id 4609
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4609
# after 10-20 seconds
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "CMO", prod id 4609
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4609
# over and over...
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "CMO", prod id 4609
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4609
Blinking stops when i restart computer.
I have newest xorg and intel drivers (xorg-server 1.7.1.901-2 & xf86-video-intel 2.9.1-1). I tried also downgrade this (and related) packages to older versions (even xorg-server 1.5.* & xf86-video-intel 2.4.*) and the same happens... with only one difference. On that oldest packages I've tried screen doesn't blinks, but the wallpaper of the desktop is changing: my -> default -> my -> default... with the same frequency . I was googling a lot, believe me. I study IT on a University and I asked my friends from there, and they just run out of ideas. In addition i can write that it isn't my laptop fault because windows xp works fine and ubuntu 9.04 (i had before archlinux) also worked good. It has started on ubuntu 9.10, so I thought I move to archlinux, and its still here? I suppose its a problem with intel drivers or xorg, but somehow linked with power management of the monitor(?). But why then older packages don't work? Please, I will be grateful for any help.
My /etc/X11/xorg.conf file generated by 'Xorg -configure' command:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri2"
Load "record"
Load "dbe"
Load "dri"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
#Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -HSync -Vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by joda (2009-12-01 09:49:38)

SOLVED!!! Must enable KMS => switch off vga option in grub, and replace it with "i915.moduleset=1"

Can PPC and Intel OS's be on the same hard drive?

I do a lot of work on Apple computers for clients.
I have made it a habit to bring firewire hard drives with OS X installed to my work locations so I can boot peoples' computers from my own, clean OS for numerous troubleshooting purposes.
I was hoping to take a big hard drive I have, partition it into 4 parts, and install 10.4 Intel, 10.4 PPC, 10.5 Intel, and 10.5 PPC.
But after I installed the PPC 10.4, I went to my macbook pro and tried to install 10.5 Intel.....and it wouldn't let me!
So now I am learning about the Apple Partition Map format for a drive versus the GUID format and that basically one is for PPC and the other for Intel.
But I would like to know if there is any way to format a drive in such a way that I can indeed install PPC and Intel version of an OS onto one physical drive in separate partitions???
anyone?

It's not intuitive but it's possible. You must set up your external drive using the APT partition map. Install the PPC version of OS X on one partition. Now here's the trick: You must install an Intel version of Leopard on a drive that has been partitioned using GPT. Then clone that installed version to another partition the external drive that now has the PPC version of Leopard. You now have a PPC version of Leopard on one partition and in Intel version on the other partition. You will find you can boot an Intel Mac from that partition even though the drive is partitioned APT.
The problem is that Leopard will not allow itself to be installed on an APT partitioned drive. But an Intel version of Leopard will work just fine from an APT partitioned drive.

I have a macbook pro with 250 GB of Space, 2.2 Processor, 16 GB of Memory 1600MHz, and Intel Iris Pro 1536. I backed up my apps using iTunes but I am having a hard time restoring my apps back to my iPhone 5s so could you please help me?

I have a macbook pro with 250 GB of Space, 2.2 Processor, 16 GB of Memory 1600MHz, and Intel Iris Pro 1536. I backed up my apps using iTunes but I am having a hard time restoring my apps back to my iPhone 5s so could you please help me?

So did you ever get your apps back on your iPhone?

After updating to mavericks I have to constantly enter my apple ID for mail, iBooks, iTunes and many other applications that used to be part of my keychain. How can I get my log-in to work again?

After updating to mavericks I have to constantly enter my apple ID for mail, iBooks, iTunes and many other applications that used to be part of my keychain. How can I get my apple ID log-in to work again?

Several times I've re-entered my passwords under Preferences/Internet Accounts/iCloud and it won't save since I've installed Mavericks. Also, the iCloud icon in the left column in Preferences/Internet Accounts/iCloud is greyed out but allows me to click on it to set-up. When I click on iCloud the password is filled out but the "Enable this account" check-box is not checked. I check it, and all seems correct. The icon is no longer grey, the password is correct, the "activate this account" check-box is checked. Then, when I launch mail, notes etc. I'm still prompted to re-enter my apple ID. The log-in loop continues. For years my keychain has worked perfectly. What has changed in Mavericks?

Completely frustrated by iBooks Author and iBooks

I have been writing in iBooks Author for a while to produce a book. I loved what was shown by Apple as possibilities. My book contains a lot of diagrams, the source material are vector images (SVG or PDF). These images are sometimes large and are unreadable, unless the user can zoom in and pan/scroll around.
Given that iOS is PDF-based and that HTML5 has SVG I assumed (mistakenly) that iBooks and iBooks Author would support resolution-independence vector images. Indeed, it will accept PDF often, but on creation of the .ibook, it produces low resolution bitmaps. There is no decent way to create image viewing that enables a user to look at a diagram that cannot be read on page size of an iPad2. Interactive Image will allow larger images (up to 4096pixels wide in landscape mode), but to let the user zoom you need fake viewpoints that point somewhere and in all, creating something where the user can pan/scroll/zoom is ugly and a pain.
I have been looking at HTML5 widgets to see if one can get around this. But here too, iBooks Author seems not to allow SVG in those (just displays empty, so does iBooks Author kills the SVG on export from .iba to .ibooks?). SO, I hoped the standards of iOS (PDF and HTML5) woul dsolve any problem, but iBooks Author seems to make sure it does not work.
I am so frustrated that I am close to giving up. iBooks Author and Ibooks need (for me):
- handling vector-images (SVG and PDF) (come on, Apple, how can you be so slow with supporting resolution independence, especially given Retina iPads?)
- the ability to let the user pan/scroll over large images that can be zoomed in/out
And I am not talking about stupid things like not being able to replace an image inside a picture element with a new image without losing the picture element and having to manually redo all the links to it.
It has been more than a half year since Apple released iBooks Author. Unless I find a way to let the reader investigate larger diagrams, preferably interactive ones, e.g. created as a HTML5 widget with SVG objects in it, or unless Apple delivers a product with less problems bugs and such, my project needs to move away from iBooks.

Thanks, but I am not going to try anything else. I have lost any trust in iBooks Author that I can get this right.
First, it means buying Keynote just for this experiment and besides that means that my images all end up in a widget (I have many inlines now) which will also not be exported properly in PDF.
I am unhappy enough that I have to buy Pages to save my project (if I had known this in advance, I would probably have written the book in TeX and try to find a decent paper publisher) and lose all the nice interaction ideas I had.
If iBooks and iBooks Author still exist a year after I have finished my old fashioned book, maybe. So far, this looks like another beta-never-to-be-kept-alive-in-a-decent-way product attempt at Apple. Stuff gone like iWeb or iDVD (colleague bought his Mac, used iMove to create a Movie and wanted to create a DVD. Turns out he needs to shell out $99 for Roxio to do that. Not a happy camper).

I recently purchased a used ibook g4 and want to update to itunes 10.2. It tells me i need mac os 10.5 to do so. Today is the first day I have ever used a mac and I am not well versed on computers to begin with. What do I need to do?

I recently purchased a used ibook g4 and i want to update to itunes 10.2. It tells me that I need to update to mac os 10.5. Today is the fist time that I have ever used a mac and I am not very well versed on computers to begin with. From what I gather I need to purchase the mac os 10.5 but there are a lot of different options and I dont know what I need to do. Can somebody point me in the right direction? I dont want to spend too much money because i just want my ipod touch to be compatible with my ibook. thank you

Hi
Your question is more suitable for the 10.4's General Forum rather than 10.4 OSX Server. Post here instead:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.4_tiger?categoryID=1 77
You'll have more of a chance of someone responding.
HTH?
Tony

G4 and Intel compatibility

Hey there!
My new MacBook Pro is the first Mac I've owned. I'm using it for music creation and most of the software has system requirements for a Mac G4 processor. This may be a stupid question but will they run fine with my 2.16GHZ Intel Core Duo processor?
Thanks!
- Wil

Hello Wil,
And welcome to the Discussions!!
Your Macbook Pro will run G4 software (PPC) just fine. Included in the installation of OS X is a run-time environment called "Rosetta." Rosetta translates PPC code "on the fly" so that it can be run on the new Intel processors.
Obviously, these applications will not run as fast on your MBP as Intel-native software will, but Rosetta does a pretty good job. Depending on the software, it should run about as fast on your MBP as it would on a G4, due to the faster speeds of the Intel processors. These apps take a hit from having to run in Rosetta, but this is balanced by the faster machine.
You don't have to be concerned about whether software is "Universal" (written for both PPC and Intel) or PPC only; OS X will detect which is the case and run it in the appropriate environment, transparently. Just install and launch the software; OS X takes care of the rest.
There are some circumstances, however, where you might need to do a little "tinkering" to get an application to install. Many apps make use of OS X's "Installer" application to install themselves. If this is the case, and the application isn't "Universal," you might get an error message upon trying to install it. Flip4Mac, for example (a Windows Media replacement and "helper" application), uses the OS X "Installer," and it won't want to install itself. No problem; just navigate to the "Installer" application in /Applications/Utilities/, click on the Installer application, press Apple-I to open a "Getinfo" window for it, and click the "Open in Rosetta" button. This will cause the Installer to open in Rosetta, allowing you to install Flip4Mac.
Still using the Flip4Mac example, the same "Open in Rosetta" choice applies for its use. Flip4Mac installs components in Safari so you can view Windows Media files in that browser (like CNN.com video). Under normal circumstances, you will not be able to view these videos in Safari. With Flip4Mac installed, however, you can set Safari to "Open in Rosetta," and the videos work perfectly.
Eventually, all software, plug-ins, components, etc. will be "Universal," and our need to use "work arounds" will diminish and disappear. Since everything will be running natively, and thus much faster, we will all be happier.
Scott

Ibook g4 and intel

Similar Messages

Maybe you are looking for