IBook G4 and iPhoto
I'm still having problems importing images into iPhoto it keeps closing within 2-3 images..(I'm importing from file transfered from intel imac)..L
Apple Help tomorro"
Similar Messages
-
I have prepared an 82 page book on iPhoto, ready to buy. There is a message over about half the photos saying "drag photo to place in background" as if it doesn't see the photo already there. I have spent over 20 hours getting to this point and can't bear to start over! Its a Mac 08X 10.6.8 and iPhoto 08 7.1.5. I have made other iBooks on this software and computer with no problems. Help please!
Look for a page that has a similar layout:
The one photo per page layout is the easiest to miss. Just click on a background color to remove the problem.
OT -
PLEASE, PLEASE HELP ME. I'm a computer ignorant woman and need help. I have an IBOOK G4 and I was trying to fix a problem in IPhoto (which never got fixed) and took some guy's bad advice to reset iphoto or something and now my plug-ins are gone too. Or at least the one(s) that were allowing me to listen to on-line discussions and audio recordings.. Can anyone help me? I have gone to UPDATE SOFTWARE and updated Java but that is all. It's like I go to a think were there is an audio thing to listen to and there is a picture of a plug in and it says something like "Plug in not available to listen to this" and then gives you an option to download plug-in but when I do, it says something like "No Plug in was found that was useable" or something alone those lines. Then it has a manual plug-in option but when I clicked that, I entered the frustrated crying zone. Can you help? I will so give you big points! Thank you!
THis is all Greek to me, but maybe it answers your questions???? Thank you Ronda.
ATA Bus:
MATSHITADVD-R UJ-845E:
Model: MATSHITADVD-R UJ-845E
Revision: DMP2
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Internal Microphone:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Left, Right
PluginID: TAS
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
DIMM0/BUILT-IN:
Size: 512 MB
Type: Built-in
Speed: Built-in
Status: OK
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 6
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 6
Dynamic Power Step: Yes
Reduce Processor Speed: No
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Wake On Modem Ring: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 9
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 9
Dynamic Power Step: No
Reduce Processor Speed: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 466
Remaining Capacity (mAh): 466
Amperage (mA): 0
Voltage (mV): 16491
Cycle Count: 247
AC Charger Information:
AC Charger (Watts): 50
Connected: Yes
Charging: No
Hardware Configuration:
Clamshell Closed: No
UPS Installed: No -
I have a macbook air - I am going to buy an iPad, will all my itunes and iPhoto etc be available on my iPad (how do I get it there)?
How do i check what of my info is on icloud (can iphoto be on icloud??) i have taken ten annual icloud subscription and i know my music is on it....You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom -
Optimal Workflow with CS3, Lightroom and iPhoto
I am using Lightroom and CS3 for my initial workflow, adding keyword tags, ratings and flags to my photos in LR. I would like to be able to work with these photos in LR and CS3 and transfer/copy the best of them into a "iPhoto" directory and import them into iPhoto with the CS3 work, meta data and keywords intact so I don't have to go through these changes again in iPhoto. I prefer CS3 for doing the work, but like the emailing, slideshow and iBook capabilities of iPhoto.
Thanks in advance,
KevinFew people use both Lightroom and iPhoto - they both do essentially the same thing but are different and in the past iPhoto has found LR processed photos unacceptable - and they can not operate on the same physical photos - you must export photos form LR and import them into iPhoto since they both manage photos
If you want to use both you will have to have photos imported into each
Fortunately external hard drives are cheap -- iPhoto is perfectly happy having its library on an EHD
LN -
I recently upgraded my system from panther to tiger. When I did this, I did not use an archivial restore/ install, I erased everything, then put tiger on my computer. I noticed tonight that imovie and iphoto are no longer on my computer. Does anyone know why, or what I can do to get these applications back on my computer? Also, my automator is not working because these two applications are no longer on my computer.
Hi Lauren,
welcome to this fourm
.... well, you made a mistake...- the iApps are NOT part of the system software since version 2.... you have to buy them extra...- with a clean install you have erased them, gone, nirvana, zero...-
BUT!!
... you should have installer cds/dvds with you iBook...- you should be able to re-install the older versions... best practise anyhow is, to buy iLife05 in combo with 10.4.......- -
I am very new to Macs and iPhoto so this may be an idiot's question, but I have just created my first photo book and want to buy it, but the "buy book" button is not highlighted and when I click it nothing happens. Is there some step I am missing or some connection I need? I am on the internet. Thanks!
I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
http://DingDingMusic.com/Manuals/ -
Color Space for iBook Printers and Photo Printers?
Has anyone figured out what the Color Spaces are for the iBook Printers and the Photo printers they use when you order prints through iPhoto? is it sRGB IEC61966 or something else? I want to clean up some shots in Photoshop before sending...
Thanks!Yes, I set all profiles to the sRGB except the monitor. I calibrated my monitor thru the system preferences as the whites seemed too yellow with the sRGB for my viewing tastes.
I don't do a whole lot of printing. More into creating iDVD projects but I have Photoshop set for sRGB. There are a number of sites on color management which may give you some more insight.
http://www.shootsmarter.com/infocenter/wc007.html
http://www.gballard.net/psd.html
http://www.gballard.net/psd/honormyembeddedprofile.html
http://www.apple.com/pro/color/ -
i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos
Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Lightroom will not import my photos. It did up to a week ago. I have changed cards and cameras (both worked two weeks ago). I can import the photos to Picasa and iPhoto. I get the following error message:
Some import operations were not performed.
The following files were not imported because they could not be read [followed by a list of the files I wanted to import]
Thumbnails show up. LR just will not import them.
Any idea what is going wrong?If the Import button is not clickable, that means that Lightroom thinks you have no new photos to import (one possible reason is that they are duplicates)
So, you need to figure out why Lightroom thinks that. The way I would do this is to search your Library module for at least one of the photos, by file name. To do this, you would follow all 4 of these steps in sequence:
Click on All Photographs in the Catalog Panel on the left of the Library Module
Turn off all Filters (Ctrl-L or Cmd-L once or twice)
Expand all stacks: Photo->Stacking->Expand All Stacks
Search for one or more of the photos using the Filter Bar (press backslash), search by File Name -
I have a Macbook Pro, the last generation, not the most recent one. It fell about 2 feet in late November 2010 and had the screen and logicboard replaced right after. A day or two after that, I started to notice that my word documents, pictures files, pdf files, itunes library and iphoto library were coded over and deleted out of nowhere. When I click on it, it says it is not a compatible format or cannot be read, etc. However, this doesn't happen all the time and not with every file. I could open a new word document and begin it today, and tomorrow it will not be retreavable, but I have a document on my desktop that has been there since January and can still be opened, so this happens without warning.
I have taken it in to the Genius Bar at my local Apple store several times with this problem, and they say they cannot see anything wrong with my computer. On my most recent visit, the lady told me to buy an external hardrive, transfer everything onto it, then do a complete clean out of my computer and reboot it I guess. If it doesn't continue, then that might have been the problem, but if it does continue, then it is obviously not that. I am really confused and I don't know if I should trust that this is the problem or just go ahead and buy a new computer all together. I don't have applecare anymore.
Help me!!! I am desperate.Does your MBP still have its original hard drive? If so, it may have started to go south. The average useful life of a notebook drive is 3-5 years, and if yours is the original, it would be about 4 years old. The drop could also have affected it.
It might be worth booting from your install disc and repairing your boot disk. It sounds like you could have some directory issues. Repair until there is nothing left to repair. If Disk Utility cannot repair the drive, you will need a stronger utility like Disk Warrior or possibly a new drive.
It also sounds like you may have some software corruption, which can happen if you have hard drive problems. Have you tried reinstalling the OS? You would want to make a backup first on an external drive and then use the archive and install feature and then update the OS.
You might want to download and run SMART Utility:
http://www.volitans-software.com/smart_utility.php
You can download the demo and run it several times for free. SMART Utility seems to be somewhat more critical than Disk Utility, and may be able to detect impending drive failure sooner.
If the drive checks out OK, then you can follow the advice you got from the genius and make a clone of your boot drive using Super Duper or carbon Copy Cloner on the external drive. You could boot from the clone you made and see how your Mac does when booted from a different drive. If all is good, you can reformat the internal drive and clone back to it.
If all you need is a replacement hard drive, then your Mac is likely worth fixing. I too have a 2007 MBP, and I replaced my hard drive right after Applecare expired, as the drive started to fail a week after Applecare ran out. I put in a Western Digital 500 GB 7200 RPM Scorpio Black, and have been running on it ever since. I have also upped my RAM to 6 GB and my OS to Lion. Not all the features of Lion work on a 2007 MBP--the trackpad does not support Gestures, and AirDrop is not supported. Even so, I expect this Mac to last me a few more years.
iFixit has instructions for replacing the hard drive, and OWC has both good RAM and kits for hard drive replacements. My gut feeling is that your hard drive is behind the weird symptoms you are experiencing.
If you are ready for a new computer, by all means get one--there are some great choices. However, you should be able to fix your old Mac for not very much money and get some more use out of it.
Good luck! -
Have iphoto 9.0 working on a mac osx 10.7.4 yesterday ilife with idvd was downloaded into my mac,i can't open my iPhoto now its telling me to update app, but when i do it says no new updates are available at this time,and iPhoto update mesg pops up again.
Hi,
I scoured the web looking everywhere for a solution to this.
Exit Code 15
OSX 8.5 with Work@Home DVD media for CS6
I followed instructions to run 3rd party cleaner software
I tried the adobe removal tool
removing all copies of adobe software manually
installing from a new account, safe mode, plist everything suggested that i found did not work.
A colleague suggested that removing the below folder would allow the installation:
/Library/Application Supports/Adobe
They turned out to be correct, so i am passing this on, because this took far too many hours of my time.
Cheers,
Smokey -
How to get Aperture and iPhoto to use Pentax *ist DL RAW images natively
Using some techniques that I found in various places in these forums, I am going to give step-by-step instructions to get Aperture and iPhoto to recognize Pentax *ist DL RAW images natively.
Note: This worked for me using 10.4.6 with the latest iPhoto 06 and Aperture updates. I do NOT know if this will work on older versions of OS X, iPhoto, or Aperture.
Note: If you also use a Pentax *ist DS camera, these instructions will probably disable support for that particular device due to the modifications made to a system file. Only complete these instructions if you want to use a *ist DL camera.
** These instructions involve modifying system level files using a HEX editor. If you are not comfortable with this, do NOT attempt to do this or you could kill your system. Remember, BACKUP BACKUP BACKUP. These steps worked great for me but follow at your own risk!! **
Ok, lets begin...
1) Download this great patch by macintosh_tech
http://idisk.mac.com/macintosh_tech-Public
This patch contains an updated raw.plist file which includes the RAW information for the *ist DL. This patch also contains an updated libRaw.dylib file and an updated Raw Presets file for Aperture.
** Do NOT copy the libRaw.dylib file from this patch to the folder listed in the patch Read_Me. This file did not work on my Intel-based Mac and crashed my system!!
I was able to modify my original libRaw.dylib file using a HEX editor to get it to work on my system. Instructions for this modification will follow.
2) Open the .dmg of the patch in a Finder window
3) Open a new finder window and browse to /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ImageIO.fra mework/Resources
*4) Backup the libRaw.dylib and Raw.plist files. Copy them to a safe location. For extra safety, you can just copy the whole Resources folder to a safe location (Make sure that you COPY it and dont MOVE it)*
5) Right-click the libRaw.dylib file and select "Get Info". Look at the bottom of the info window and expand the "Ownership & Permissions" tab. In this section, expand the "Details" tab. If the lock icon is in the locked position, click it to unlock it. Change "Owner" to your user name. If requested, enter your system password at this point. Close the info window. This step lets you modify the libRaw.dylib file.
6) Complete step 5 for the Raw.plist file.
7) Copy the Raw.plist file from the "Place In System Folder" folder from the patch to the Resources folder. It will ask you if you wnt to overwrite the existing file. Click "Replace".
8) Open a new finder window and browse to the /Users/YOURUSERNAME/Library/Application Support/Aperture/ folder.
* 9) Backup the "Raw Decode Presets.plist" file *
10) Copy the "Raw Decode Presets.plist" file from the "Place In Home Directory" folder from the patch to the /Users/YOURUSERNAME/Library/Application Support/Aperture/ folder. Click "replace" if it asks you.
11) Here's the tricky part. Download a HEX editor if you don't have one. I used 0xED. It is free and can be downloaded from
http://www.versiontracker.com/dyn/moreinfo/macosx/29521
12) Open the libRaw.dylib file from the Resources folder in your HEX editor.
Note: This is your original libRaw.dylib file from your /System/Library/...../Resources/ folder, NOT the file from the patch.
Use the Find function and search for the string "Pentax *ist DS". Make sure you are using "Search Type: Text" (or equivilent in your editor) and that you use proper case. When you find this string, change the "S" in the "DS" to an "L". The string should now look like "Pentax *ist DL". Use the "Find Next" function to find the next instance of "Pentax *ist DS". Again, change the "S" to an "L". There should be two total instances that you need to change. Save the file and exit the editor.
13) Open Disk Utility and repair permissions. This will set the raw.plist and libRaw.dylib files back to their original permissions.
14) Reboot the system.
15) You should now be able to view .PEF files natively in Aperture and iPhoto. I appologize in advance for any typos. Let me know how this works, as this is my first tutorial of this nature.
Macbook 2.0 Mac OS X (10.4.6)It would appear that my last post was a moot point as the 10.4.7 update adds support for the *ist DL. It's nice to have it biult into the operating system now.
-
Cannot open iPhoto. It's on the toolbar, but will not open. I can hold the mouse over the icon and hold the mouse button down and iPhoto will open to a thumbnail photo, but if I click anywhere on the page, iPhoto closes. iPhoto shows open on top of page, but practically all selectable items are gray.
It sounds like the window might have slipped down below the Dock or similar. Try change your screen resolution and (SystemPreferneces -> Displays) and that should force it back into reach. The return the resolution to whatever it was.
-
I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks
If your iPhone can't be updated to a higher iOS version then the only way to get them is if you downloaded versions of them which were compatible with iOS 4.2.1 and you still have copies of those versions somewhere e.g. on your computer or on a backup - only the current version of each app is available in the store, and as apps (and other content) are tied to the account that downloads them, you will need to have older copies that are linked to your id
Maybe you are looking for
-
How to get GUID of nav predecessor in Breadcrumb navigation
Hello, we have implemented a Z-Component in which we can navigate from other standard components via i.e. follow-up transaction. I have the requirement to get the GUID of the transaction from which we came from. For example we are working at an offer
-
Issues in ADF mobile application using Trinidad components
I am facing the following issues when developing a mobile application using trinidad components : Jdev version : 11.1.1.6 1) I dont see a date component using trinidad components? The dev guide http://docs.oracle.com/cd/E23943_01/web.1111/e10140/sup_
-
Hello everyone! I'm new around here and I registered solely and exclusively to help me I'm desperate! well I tell you my problem, I have a 9300 with virgin mobile plan but they only work with Opera Mini, well last week I desactualizo the whatsapp and
-
Client dependant objects in ABAP or SAP
5.What are client dependant objects in ABAP or SAP?
-
Oracle 11g R2 Instance Caging on Linux 64-bit? Good, Bad, Ugly.
Hello everyone I hope this is the correct forum, if not please advise best place to post this question. I am thinking of using Oracle 11g R2 Enterprise Edition running on 64-bit Linux server (Oracle Linux 6.x or Red Hat Linux 6.x) with Resource Manag