Ibook G4 and Nano 3rd gen.

I am trying to sync my Nano 3rd generation with an Ibook G4 that is running MAC OSX 10.3.9. It wont work. Any advice

Install Leopard if your iBook meets the minimum specifications.
Minimum System Requirements
Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
512MB of physical RAM
DVD drive for installation

Similar Messages

  • Ipod nano 3rd gen.  some albums have suddenly disappeared from ipod, but they are showing as ticked on itunes library, have bought more tracks since on itunes and they are showing, any help please

    ipod nano 3rd gen - tracks (whole albums) have disappeared from ipod but are showing ticked in itunes library and ipod is synched, have bought tracks from itunes since this happened and they are fine, any help please

    You may have transferred all your songs, but your iPad is seeing the library as a different entity.
    The following article(s) may help you.
    Moving your iTunes library to a new computer  

  • TS1538 I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

    I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

    not recognized by anything: http://support.apple.com/kb/TS1369
    recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
    solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
    (make sure you go to the next slides.

  • IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

    iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Nano 3rd gen and itunes 8.0.1

    My ipod nano 3rd gen will not sync with itunes now that we have downloaded the latest version 8.0.1. Itunes locks up immediately upon recognizing my ipod and closes upon clearing the error message (systems error upon opening itunes). Originally I was unable to open Itunes all together, but after going through the support programs and following the instructions of removing one of the SDDb files, Itunes was at least opening. Unfortunately I am unable to do anything with my nano when it is connected to the computer or when I try and connect it after opening Itunes. Itunes open if there my nano is not connected to it.
    I am completely at a lose. Please offer some advice.
    cheers,

    So, to bring closure - and possibly help someone else with the same question - I'll answer my own question.
    The new 3rd Gen Nano arrived today. I just decided to install iTunes on the new computer and connect the new Nano to that computer. I was prompted to name the Nano and I was able to log into my existing iTunes account and purchase music. I was not able to transfer those purchases to the Nano - got an authorization error. I needed to authorize the new computer and then I was all set.
    It turned out there was already a 2nd authorized computer on the account (my laptop which I had forgotten about). I was surprised that when I connected the new Nano to that laptop, it was recognized without question - and without affecting the old Nano that had been previously docked to the laptop.
    My only problem was downloading a podcast that I subscribe to (Leo Laporte's The Tech Guy). I tried downloading the last 4 or 5 podcasts on the new computer - but, kept getting a network timeout error. I tried on the laptop and got the same errors. I knew that these had been previously downloaded to the old desktop. So, I updated that to the latest version of iTunes and was able to get those podcasts onto my new Nano.
    So, the bottom line is this turned out to be a no-brainer. Was worried for nothing.

  • The volume in my ipod nano 3rd gen goes up and down on its own

    I notice lately my nano 3rd gen adjust its volume on its own!  Also the clicky wheel doesn't work some of the time.
    I've tried resetting it and syncing it with my pc but it did not help.
    Should I bring this in the store to fix???

    Upeace, it's so long ago I can't remember now… But I do know that my newer MBP's volume can be affected by someone tinkering with the Apple TV remote. Is that a possibility? If so you can turn this off in System Preferences. It's not at all easy to find though—you have to go into 'Security Privacy > Firewall > Advanced' and then tick 'Disable remote control infrared receiver'.

  • Rented movies and Ipod nano 3rd gen.

    I believe the ipod nano 3rd gen allows for rented movies.
    so I should be able to sync my rented movies to my ipod easily.
    However, when I go to the movies section under sync, the rented movies tab does not show? Something I'm doing wrong? (I believe before I saw the rented movies tab before, it stopped showing though) or does apple just suck?

    Yes, the 3rd gen Nano supports rented movies. There is no separete tab for rented movies. They show up in the regular Movies tab. You can't sync them, though, only transfer them from one device to another as you can only have them on one device at a time per terms of rental.
    With your Nano connected, click on the movies tab. You should see two boxes at the top. In the left hand box should be all of the rental movies you have on your computer. There should be a button between the two boxes that says, I believe, "Transfer" (don't have any rental movies so I can't say absolutely). Select the movie you want to move to your Nano and press transfer.
    And by the way, your last comment almost resulted in me not even bothering to try to answer your question. Rudeness really has no place here (or anywhere, in my opinion). Everyone here is a fellow user, a volunteer.
    Best of luck.

  • Ipod nano 3rd gen unit is locked, though never have done a manual lock on it. Screen is lit and lock button shows.  Have latest itunes, but nothing syncs.  Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help

    ipod nano 3rd gen unit windows xp.   Nano is locked, though never have done a manual lock on it. Screen is lit and lock button shows.  Have latest itunes, but nothing syncs.  Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help please.

    Sounds like the hold switch is broken, meaning you'll need to have your iPod serviced/replaced either by Apple or a third party repair company.
    B-rock

  • My ipod nano 3rd gen gets error code -9459 when I try to convert a video in Itunes

    I'm tring to convert video from Youtube to play on my ipod nano 3rd gen.  When i go to itunes and Advanced and set it to convert for ipod it goes on for quite a while then about 3/4 way done I get error message Erroe occurred converting file "teapot 1". An unknown error (-9459)
    What do I do?  I tried Real player converter too - no luck.

    I'm not sure about the error message, but it might just be easier to use an application such as Handbrake or MPEG Streamclip to create an iPod compatible version of the video.
    B-rock

  • Ipod nano 3rd Gen not recognized by itunes or windows 7

    USB device not recognized.  
    things I have done
    put Ipod in disk mode still didn't recognized
    My Ipod Classic 6th Gen works fine
    It shows 3 Mass Storage Device
    when I plug in Ipod nano 3rd gen it shows unknow device
    have deleted Mass storage devices and Apple Moble Devices
    unpluged computer from wall
    nothing solving problem
    I also tried it on my laptop its not being recognized
    my wife Ipod nano is doing the same thing as mine
    its got to be the software download from itunes because it has worked on all previous versions.

    I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
    I have tried resetting, I have tried downloading newest Itunes.
    Must be the Nano itself if it doesn't get recognized by mutliple PCs?
    I haven't used the Nano for probably 2 months. Previously it worked fine...
    One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

  • IPOD NANO 3rd Gen problem Apple Mac set up PC BASED MAIN UNIT

    I have been asked by a friend to help out because they asked to add music to their new IPOD. But the owner is a tech scared person. They gave the unit an IPOD NANO 3rd Gen to my friend who uses Apple MAC they set up the IPOD with their Itunes and added the songs.
    Later they wanted new tracks but have now downloaded ITUNES to their own PC Windows Vista system. The tracks were added to a USB memory stick and transfered and added to the PC Vista ITUNES. But now the IPOD Nano will not register on the Windows Vista ITUNES system but will show up on the "My computer"
    I have reset the nano by holding the on/off and menu etc to get the Apple logo, the unit beeps as does the laptop PC Based ITUNES etc but will still not register on the ITUNES or allow me to sync the music from the ITUNES to the IPOD.
    Can anyone advise how I can reformat the IPOD or reset the IPOD and remove all music currently on it to start again but get it to register/set up and show on the ITUNES on the windows VISTA unit rather than the mac based system.
    Thanks,
    Global_mongrel

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

  • My PC Shuts Down When I Plug In My New IPod Nano 3rd Gen.

    The title of this post pretty much says it all. Got me my new iPod Nano 3rd gen. yesterday. Brought it home, booted up the puter, loaded iTunes and plugged that sucker in. Well first iTunes kindly instructed me that I would have to download it's newest software, which I did.
    Then soon afterwards when I thought i was set, I plugged in my new 3rd gen iPod Nano to the pc and as soon as I did that my pc shut down completely, and restarted. Shut down is putting it mildly, I mean it just went 'kablink" and then was restarting.
    I tried uninstalling iTunes, cleaning my temp folder, my internet cache, then reinstalling iTunes anew, still nada. All to no avail, people, because each and everytime I plug in my new iPod Nano, no sooner than i do this my pc summarily goes "kablink" on me and starts booting up again.
    NOW I STILL have my iPod Nano 2nd gen, and it works fine, even with the newest iTunes software, it doesn't screw up my pc like the new 3rd gen iPod Nano does.
    Now I am to conclude that the problem lies in the 3rd gen iPod itself. How could it not? My iPod Nano 2nd gen works absolutely fine, and everytime I plug in my new iPod Nano, I shut down in a flash withtout fail. Anyone of you have this error? I would love to know short of calling iTunes tech support about what to do about this, this is a MAJOR bummer for sure. Now I have to be concerened about whether or not I am ever going to get this thing to work now.
    Is the iPod broken? If not why the shutdowns then? Please advise. Many thanks in advance.

    Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

  • Ipod nano 3rd gen (click wheel)

    I currently have a ipod nano 3rd gen with a click wheel. I have uninstalled, reinstalled itunes and rebooted my computer already (I have windows XP). It shows up in "My Computer" as unknown but itunes will not reconize the ipod is connected, but does with my other ipod. I've tried changing the drive letter on this 3rd gen; but it wont appear to even change the drive letter. I believe I need to download the drivers (its what i had to do with my previous ipod) but I would like a clue where to download the drivers from, or someone to shed any light and a solution for this issue. My ulitmate goal is to get itunes to reconize it so that I can restore the ipod
    Thanks.

    Clickwheel games are no longer available in the iTunes store.  Sorry.
    B-rock

  • IPod Nano 3rd Gen Issues: would be grateful for any help

    Dear all,
    I recently purchased an iPod Nano 3rd Gen for my wife. I have been using a mac for 7 years, still have my first iPod 5GB scroll wheel as well as a 60 GB iPod video 5.5 Gen.
    Here's what's happening.
    iPod Nano connected via dock (which is in a USB hub...could that cause problems?)
    Connect, sync, no worries.
    Update iPod Nano software to 1.0.2.
    iPod then, halfway through syncing, flashes the Apple Logo every 6-7 secs and then does the same again.
    It is not recognised in iTunes like that.
    Any help?
    A hopeful Dan

    Hi,
    Same thing just happened to me - I have put the Nano 3G into disk mode (hold Menu and Select for 10 seconds then immediately hold Play/Pause and Select).
    Just doing a factory restore now, that should bring it back to a brand new state and will try again from there.

  • Vertical line on my ipod nano 3rd gen?

    Yesterday my ipod was fine, last night i added some songs to it and then after when I was listening to music i noticed a very tiny vertical line up top above the title of the song playing.. it didn't look too out of place so i thought maybe i'd just never noticed it before.. but then this morning when i get up theres a line from top to bottom.. and i can't find support or topics about this (on an ipod nano 3rd gen) anywhere.. so far its playing the music but.. it doesn't seem right so i'm not sure if anyone else has had this? or what i should do? please help!

    http://www.apple.com/support/ipod/five_rs/nano3gen/#

Maybe you are looking for

  • Please urgent help needed for the following

    Hi Everybody! I desperately need help as soon as possible. Following is the partial code for the driver program which will use the Employee class Objects(Employee is declared abstract). If you want to see whole code you can take a look at my last two

  • Saved data cannot be viewed in FDF file

    Hi, I am new here, first time. I have strange problem, not sure its a design change or what. lets take this senario, we have online forms to be filled by user A. email Data function is used to email the form to User B. when user B opens the form from

  • J2EE Engine start error: Database initialization failed!

    My J2EE engine now fails to start - jcontrol stays yellow.  I've followed Troubleshooting pages from help.sap.com Admin manual topic "starting J2EE Engine". Background: I was running through JDI Scenario 2+ on a fresh installed WebAS 6.40 at SP9.  Us

  • HELP!!!  Can't Open iTunes

    I haven't been able to access iTunes for over a week! I keep getting this error message: "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of something, the information you were workin

  • Why does screen saver prompt for secure disk image password?

    Okay, seems like an odd problem, but here it goes. I go into System Preferences->Dektop & Screen Saver.  As the program "loads" availabe image sources and such I get a pop-up requesting a password to my secure disk image. Yes, I have a secure disk im