Ibook g4 black screen but startup sound

I have a 1.42Ghz 14" iBook that wont show anything on the screen.
When pressing the button the startup chime is audible but no picture(not even a dim one) is visible on the screen.
I used a vga adapter to connect a second display but still could not get a video signal.
Am suspecting the graphics chip but just wanted to hear around if anyone knows how to trouble shoot this..

Exerting pressure on the palm rest as Tom suggests should increase the pressure of the chip to the logic board and bring about better contact between the logic board and the chip, perhaps enough to make it work on either display. You can do a search of "logic board shim" on this forum and read about it and see where to exert pressure and how to make and install a shim.
It is worrisome that nothing shows up on the external display. If the problem is a bad display, a bad backlight, or a bad inverter cable, but the video chip itself is good, then you should get something on the external display. It's also possible that the chip itself is good, but the ball grid array (BGA) that holds it to the logic board has failed. If that is the case, exerting pressure in the right place will create better contact and the chip may work again.
A specialist can reball the logic board for about $75. However, if the chip itself has failed, reballing will not make it work again.
It is worrisome that both Target Disk Mode failed and the drive would not accept the AHT disc. It's possible that you could use an external drive, but there is still the problem of viewing the AHT results.
At this point, I think it would be worth working your way through the following article and see if any of the other suggestions in there would help, particularly the recommended resets:
Troubleshooting: My computer displays no video
http://support.apple.com/kb/HT1573?viewlocale=en_US
Good luck!

Similar Messages

  • Sending videos from iphone 4s to pc. Why do I get black screen but have sound

    Sending videos from iphone 4s to pc.  Why do I get black screen but have sound?

    Ok I checked and unchecked the playback via camera yesterday and I got black screen both times.
    I could delete the imovie prefs when I go over there today.
    I'll try another FW cable but it worked perfectly for importing but what the heck I've got one I'll try it.
    Yes camera was set to play and not record.
    Plenty of free space -- 131 GB.
    I'm pretty sure it's in NTSC DV format, but it's someone else's computer so it could have been changed by someone screwin' around not knowing what they're doing making changes.
    PowerMac FW800 (G4), iBook 1.42 G4 SuperDrive   Mac OS X (10.4.10)  

  • Curve 8520 black screen but have sound

    I've had problems before with the white screen but then a few days ago my screen was black but I was getting sound land flashing light wen I receive n messages/ emails and rings when I get calls. When I pull the battery it comes back on and screen shows for 2minutes but none of the keys will work anow then it goes black again ! Can anyone help me please ? 

    Hi Help8520
                           We are glad that restoring your device to factory setting helped to overcome the issue
    But in most cases like 99% its either because of a weak Battery or if its a hardware issue like LCD screen.Or sometime even a bad apps can cause this problem. 
    Anyway I am happy that you are able to get access to your device.Enjoy your BlackBerry 
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • IBook G4 black screen at startup with code in upper left hand corner

    I have had operating system issues for the past year, and recently had my OS reinstalled at a Mac Professional retailer. After two weeks of perfect performance, the chime stopped working on startup. This was the only problem for several days. Then when I would put it to sleep, the computer would not automatically turn back on, I had to manually reboot it. Finally, today, after the computer would not wake up and I had restarted it, the screen would flash to the apple logo screen WITHOUT the spinning wheel and after several seconds would shift to an all black screen with text in the upper right hand corner, waiting for a command entry.
    The code reads as follows:
    hfsswapBTNode: invalid node kind (-9)
    node=22016 fileID=4 volume=Macintosh HD device=root_device
    -sh-2.05b#
    Any ideas?????

    Put the install disc in the drive and start while holding the "c" key. Once satrted click through past the language screen and select Disk Utility from the Utilities menu. Highlight the drive on the left and click the Repair button. If it reports errors and repairs repeat the process until no errors are reported. If it reports errors it can't repair post the error message here.
    John

  • All my downloaded(digital copy) movies will no longer play in itunes, i get a black screen, and no sound, but the time keeps going. how can i fix this?

    All my downloaded (digital copies from dvds) won't play in itunes. I get a black screen and no sound, but the time keeps moving. How do i fix this?

    Hi 22chill,
    I recommend that we delete and re-download the movie from your purchase history:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

  • After an iPad update yesterday I sent a video and it is not viewable just black screen but sound is there. I sent it to my windows 7 laptop and there it is not viewable at all the start button appears crossed through.only works on apple PC

    After yesterday's update sent  a personal video  it was not not viewable , i was told only black screen but audio, will play on apple pc but not windows.
    On my own windows operated laptop when l open the video the start button is crossed through
    Is there something l need to do? I can view the videos fine on my iPad ?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • HT1688 My iphone is neither shown in itunes nor in redsnow .. what is the problem ? It has the black screen and the sound plays when it is plugged into the computer .. I tried to hard reset but only the sound plays nothing is shown is there any solution t

    My iphone is neither shown in itunes nor in redsnow .. what is the problem ? It has the black screen and the sound plays when it is plugged into the computer .. I tried to hard reset but only the sound plays nothing is shown is there any solution to this ?? It says that my iphone is in soft dfu mode and in the my computer > manage>device manager > it shows the apple (dfu mode) having some error sign indicating no software installed i am running windows 8 ..

    Jailbreaking iOS can't be discussed in this forum.

  • Black screen and no sound with iTunes rentals.

    I was going to chalk this up to just a corrupt download, but it's happening too much for mere coincidence now. I rented Captain America: The First Avenger in HD on my Windows 7 machine, only to find that when I tried to play it, I got nothing more than a black screen with no sound. I chalked it up to bad luck and went back to my day, only a few days later, I tried again, only to find the exact same problem had occurred with the exact same movie. I called Apple Support and told them of the problem, and while they refunded my purchases (and gave me 3 free movie rentals), they proposed no solution.
    So I tried renting Iron Man 3 today, and the same thing happened. This doesn't occur with any other movies that I own trying to play in iTunes, just with rentals. I've already tried a reinstall, which did nothing, and I'm out of ideas.
    Any assistance is appreciated.

    Yeah! Problem solved: It's a QT issue.
    Cause: Mac Update Software downloaded a faulty QT.
    Solution: Download QT from Apple's QT site.
    Great to have the Video back

  • Why do I get a black screen and no sound when playing video in iTunes 8?

    Just downloaded the new iTunes. I don't have any video playback when I click preview in the store. No video when I try to play anything that I've already downloaded. The play cursor moves but I have a black screen with no sound. I'm hoping this is just a temporary glitch.
    Any recommendations? I'm using the latest version of Leopard 10.5.4 on an Intel iMac.

    Yeah! Problem solved: It's a QT issue.
    Cause: Mac Update Software downloaded a faulty QT.
    Solution: Download QT from Apple's QT site.
    Great to have the Video back

  • Equium A100 black screen on startup

    Toshiba Equium A100 laptop
    Completely black screen on startup so please don't say go into safe mode etc, because I can't.
    I can't see a thing.
    Like once in every 100 goes it will come on and I can F12 to boot from the format disk but it eventually freezes before completion.
    Video showing what's happening - BTW the buttons you see me pressing are Fn+F5 I've heard that that sometimes works, but yeah, it didn't.
    http://www.youtube.com/watch?v=Sb7KcROckVI
    Thanks.

    Hi
    Look not good dude I think its an serious hardware issue
    I checked the movie and cannot hear a beep when the notebook passes the POST (power on self-test). So for me it looks like something wrong with the hardware
    But did you try to connect an external monitor in order to check if something would be visible on second screen? Check this
    You could also try this:
    Disconnect AC adaptor, remove the battery, wait some time (3-5 hours), then connect both parts and try to power up the notebook. If this fails, well in such case have no many other ideas. Ohhh wait maybe you could check the RAM modules. Try to power up the notebook using one module in each slot

  • Black screen on startup early 2008 macbook pro

    I am very disappointed with Apple right now. My early-2008 15 inch macbook pro shows a blank/black screen on startup. The hd runs fine and I can dim and undim the backlight on the screen but it stays black/blank.
    I talked to an Apple rep and she told me that it was probably my graphics card (which I asked her specifically about when I researched and found many other people like myself with the same issue and then the lawsuit that came as a result). Of course, Apple no longer replaces the graphics card (like a true business person would) as of December 2012 even though they know the cards in the macbooks pros are defective. The Apple rep told me that I would have to take it in to a Apple tech to get it "officially" diagnosed as the graphics card being bad (which would cost me @$150 just for it to be looked at!) and then I would probably still have to pay for the repair!
    Of course this happened in the middle of the week while I was in the middle of working on a sermon and other presentation projects. So I had to do my best to try to work from scratch without access to the info on my hd because the graphics card is defective.
    Apple, you know the card is defective so please just replace the card! I'm not asking for any perks or upgrades! Just to be able to use my Macbook Pro that, up until now, I have been bragging about and telling everyone how happy I was to switch over from windows!
    HELP!! HELP!! HELP!! HELP!!

    If you experience distorted video or no video . . . take your affected product to an Apple Authorized Service Provider or Apple Retail Store to determine which service and support options are available. If you plan to visit an Apple Retail store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/
    No, it has not cost anything in the past.
    Note: as of Dec 7th 2012, it is unlikely products qualify for this extended repair coverage.
    That does not mean it's an automatic "no."

  • Why do I get a black screen and no sound with video in iTunes 8?

    Just downloaded the new iTunes. I don't have any video playback when I click preview in the store. No video when I try to play anything that I've already downloaded. The play cursor moves but I have a black screen with no sound. I'm hoping this is just a temporary glitch.
    Any recommendations? I'm using the latest version of Leopard 10.5.4 on an Intel iMac.
    PS: This same question is posted in iTunes download category too.
    Message was edited by: NowWhat!

    Yeah! Problem solved: It's a QT issue.
    Cause: Mac Update Software downloaded a faulty QT.
    Solution: Download QT from Apple's QT site.
    Great to have the Video back

  • Regarding Facetime on my Ipad. I get started on a call and after 10 or 15 minutes I cannot hear whom I am talking to. They can still hear me and I still have picture on the screen but my sound stops working.

    Regarding Facetime on my Ipad. I get started on a call and after 10 or 15 minutes I cannot hear whom I am talking to. They can still hear me and I still have picture on the screen but my sound stops working.

    Why can't we use Acrobat Pro for mobile devices? Save a whole lot of headaches!!! Now I have to return this subscription.

  • My mbp always hang (black screen but still keyboard light)(snow leopard and lion) and self hang and restart(mountain lion), How can I do? (I report problem to apple for 100 times but no reply)

    I use mbp late 2010 (MacBook Pro (15-inch, Mid 2010) Serial Number: W802627ZAGZ)
    (core i7 2.66GHz. 15" 4GB 1067 MHz DDR3) and change display to highres (1920x1080)
    it has problem that the screen go blank (or black screen) but keyboard still light. seems to display driver stop working.
    I send my mbp to service but they said no problem about hdd.??? I'm not sure that they take care just only hd problem but not handle  another problem that I tell him.
    I use it and it still hang up (not it reach 100 times errors) how can I do with this problem?

    baltwo wrote:
    Can't recall which I used to do the dynamic repartitioning.
    I'm betting that it was originally Partitioned with Snow Leopard.
    As a test I just added a second Partition with Mountain Lion to a FireWire HD and it would not let me Install Snow Leopard from my System or Retail Disc into the Partition.

  • I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio.  Can you please help and tell me what i need to do. Thank you

    I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio.  Can you please help and tell me what i need to do. Thank you

    Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.

Maybe you are looking for

  • Service Desk Graphics

    Hi All, I am configuring services desk with SP 15.But when i click on tab Graphics , i am not getting any results. what may be possible reason ? what need to configure to show graphics result of service desk. i am very thankful if any one brief a bit

  • What adapter do i need?

    I just bought a US imac 2010 on ebay, i live in ireland so what do i need to convert the power supply? i have no idea what type of plugs america use so as much detail needed as possible please? thanks!

  • Parameters in where clause

    Hi, Can we use lexical parameter in the where clause to select multiple values using IN operator. I am using IN operator to match to values in the where cluase, so do I need to use a lexical parameter or bind parameter for it. Please help.

  • How to caputre report output into an internal table?

    Hi, Is there a way to capture report output into one internal table? Regards, Amruth

  • My phone wont turn on ive tried holding the sleep and home button and nothing happened help?

    i turned my phone off and it wont turn on ive tried holding the sleep and home button and nothing happened...i plugged it in to my computer and i didnt connect to itunes help