IBook G4 cannot find system after update to 10.4.8 the first startup

Hi,
I recently updated the iBook G4 of my girlfriend from Mac OS X 10.4.6 to 10.4.8. After restart the iBook showed up the icon for not being able to find a system to startup from. I then turned the iBook off and turned it on again, now the iBook started up just fine from the previously updated system.
But since then, every time the iBook becomes started up it's the same procedure: First it cannot find a system to start up from, then we turn the iBook off and on again and then it starts up just fine. Any ideas why?
Additonally, we now found some error with disk utility on the start up disk. I started the iBook from an 10.4.6 installation disk, checked and repaired the disk. The checked it again, no error found anymore... Started up from the iBooks hard drive, checked with the disk utility from the 10.4.8 system there and this one found error again. Does this make sense?
Any ideas are really appreciated!
Regards, Canubis
PowerBook G4 15'', iMac G3 333MHz Grape Mac OS X (10.4.4) Cinema Display 20", .mac, highlighted keyboard

Go to System Preferences > Startup Disk and reselect the system you want to use to startup the computer and then select Restart which should resolve the startup problem.
Started up from the iBooks hard drive, checked with the disk utility
from the 10.4.8 system there and this one found error again. Does
this make sense?
Not sure if this is considered a bug but this has been reported by others which you can ignore.
I use Disk Utility from the Startup volume to repair disk permissions only, never to Verify Disk which you shouldn't use to check the boot volume for any directory errors with Disk First Aid repair via Disk Utility when booted from your Tiger install disc either.
When doing so, better to select Repair Disk right off the bat and if no problems are reported, you are done. No point in selecting Verify Disk to verify again.
If a problem is reported via Verify Disk and you run Repair Disk to repair the problem and if successfully repaired, no point in running Verify Disk again in this situation either. Best to run Repair Disk only and if any problems are reported and successfully repaired, run Repair again until no problems are reported which saves a step/time and is more efficient.
http://www.thexlab.com/faqs/durepairfns.html

Similar Messages

Cannot find iMac after updating to 10.4.5

Have a home network with 1 iMac (10.4.5) and 2 Windows XP machines. I had all of them communicating just fine. After updating to 10.4.5 on the iMac, the iMac can still see and access files on both of the PC machines. The PC's can both see and communicate. However, the PC can no longer see or access files on the Mac. Any suggestions

Hi,
Make sure sharing is enabled via the System Preferences and Sharing. Hope this helps.

Cannot find backup after updating to iOS 5

Hi all,
This morning I updated my 3GS to iOS 5. Because I kept getting errors, I backed up my phone, copied to bachkup to another location, then restored my phone to factory settings, then updated to iOS 5. That was all fine, but now I cannot restore my phone from the backup. The backup disappeared from its original location, and when I copied it back there, iTunes did not recognize it. It only recognizes an older backup that was in the same folder.
How can I make sure everything is restored from my lastest backup?
Also, running iTunes on Windows Vista 64 bits, if that matters, and I do have iTunes 10.5.
Thanks!

Solved it by copying the backup files from one computer to another. They are found in this folder on PC
C:\Users\Michael\AppData\Roaming\Apple Computer\MobileSync\Backup
The restore on the other computer went without problems, though I have to reinstall all apps, but all settings, photos and so on has been restored.

Runtime Error "Cannot find system in table file"

I need assistance!
I have a Blackberry Curve 8310 and have recently installed Version 4.5
I am trying to setup my synchronization. I have followed the steps to setup my calendar to Outlook 2007. It tells me Congratulations! You have successfully configured the product. However, when I press Finish, I get a Runtime Error "Cannot find system in table file"
I have uninstalled the program and reinstalled it - the same error appears.
Any help would be appreciated!
Solved!
Go to Solution.

FIGURED IT OUT!!!
The following steps, which are posted on the RIM Support will work; however, I had to do it a different way. In Step 1, it states that the ilxolkCompanion.fil is located in C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector path...however, when I searched for this file, it was actually located in C:\Program Files\Blackberry\Connectors\MS Outlook Connector. (This could be because I upgraded from 4.2.2 to 4.5 w/o completing a clean uninstall...not too sure why)
Once I located the file through the command prompt, I unregistered as per the instructions in Step 1. I then followed step 2 exactly word for word...and VOILA!!! I now have Version 4.5 working with MS Outlook 2007
ResolutionIf the Connectors folder is still present in C\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector, follow these steps:
Unregister the old Microsoft Outlook connector ilxolkCompanion.fil.
Open the command prompt.
Navigate to C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector.
Type in the command regsvr32 -u ilxolkCompanion.fil.
In Desktop Manager, Microsoft Outlook will no longer be listed as an available desktop application.
Register the most current Microsoft Outlook connector.
Navigate to C:\Program Files\Research In Motion\BlackBerry\IS71 Connectors\MS Outlook Connector.
Type in the command regsvr32 msoutlookconnector.fil.
In Desktop Manager, Microsoft Outlook will now be registered as an available desktop application.
Once these steps have been completed, configure synchronization again.

I find that after updating my ipad to ios8 banking applications to deposit funds no longer work. The camera image rotates from horizontal to vertical and cannot be corrected. Is this a new ios8 error. I tried two different bank applications for ipad.

I find that after updating my ipad to ios8 banking applications to deposit funds no longer work. The camera image rotates from horizontal to vertical and cannot be corrected. Is this a new ios8 error. I tried two different bank applications for ipad.

Hi, Thanks for that further bug description In Your Last Message That Describes The Problem I Am Having perfectly and is exactly the same for me.
unfortunately that fix for my camera Powershot G6 does not work or apply as the view pictures switch is different on G6 is not usable during download as once you plug in DC/USB cable it turns off, and makes no diff and problem still exists exactly as you just described.
thanks anyways "Selz Boy"
it has been 17 days since apple promised to get back to me within 3-5 days hopefully with a solution, but I have still not heard from them.
They blew me off, i guess, probably i will have to wait for new Yosemite OS update, which they pre-warned me could take as much as 6 months.
I cannot believe apple released this new update with such major bug issues for camera downloads and that horrible "Photos" pgm which has all sorts of downgrades in features, usefulness and new bugs compared to iPhotos which I just finally got used to and was much better software.
I am starting to lose faith in Apple and I am getting that Microsoft "FEEL" like I used to have when I was a PC user, which was why I originally switched to Apple computers in first place.
Oh well got my fingers crossed here.
Thankfully the memory card reader solution is working well, but cost me $45.

I have an iMac running with Parallels. Last year, my System Updates from Apple started popping up on PC side and I cannot find a way to link them back to the Apple side of machine. Cannot update iTunes to latest version where I use it.

I have an iMac running with Parallels. Last year, my System Updates from Apple started popping up on PC side and I cannot find a way to link them back to the Apple side of machine. Cannot update iTunes to latest version where I use it.

Hello, do you mean the files end up on the PC side, or the notifications?
On the Mac side try this...
http://www.apple.com/itunes/download/

DM 4.5, software issues message "Cannot find system in table file"

Serious error in Desktop Manager Software V 4.5Windows XP SP3MS OutlookDesktop Manager Software V 4.5, accompanies new RIM Blackberry Curve package purchased retail Bell MobilityJune 2009
After installation DM 4.5, software issues message “Cannot find system in table file”This happens during “Intellisynch” [Outlook <> Curve] set up. Tried 4 times to make this work – no luck [I am experienced DM user – 4 BBerrys over 8 years]Called Bell Tech support 3 calls total time 2 hours !!Ended up trying to do command prompt and registry setting changes over the phoneDespite 3 long calls this did NOT solve the problem
Went to Blackberry web site -- their remedy is disgraceful - they expect untrained PC users to do clean removes of DM 4.5 with Windows Registry edits by hand. Highly risky – dangerous – and likely will not work
REMEDYUse MS Add/Remove programs to remove DM 4.5 or 4.7Download old version - DM 4.2 Release 2 from BBerry web suiteLoad DM 4.2DM 4.2 works fine – copied 1000 contacts and 1000 calendar entries from Outlook correctly to my new CurveDoug SeabornToronto Canada416 819 3684

Hi and welcome to the forums!
These procedures do work, and are not very hard.
A lot of users have dealt successfully with it.
Here is the Knowledgebase article:
Let us know if you need some help or explanations.
OK?
Thanks,
Bifocals
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15278&sliceId=1&docTy...
The following error message appears at the end of the synchronization process in BlackBerry® Desktop Manager:
Cannot find table in system file
CauseA BlackBerry Desktop Software upgrade failed to remove the Connectors folder from C:\Program Files\Research In Motion\BlackBerry\Connectors. As a result, older Microsoft Outlook applications were registered with BlackBerry Desktop Software.
Resolution
To resolve this issue, complete the following steps:
Verify that the Connectors folder is present in the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
If the Connectors folder is present, complete the tasks listed below.
Task 1 - Remove the existing Microsoft Outlook connector ilxolkCompanion.fil
Open a command prompt.
Navigate to the following folder: C:\Program Files\Research In Motion\BlackBerry\Connectors\MS Outlook Connector
Type regsvr32 -u ilxolkCompanion.fil. Note: Microsoft Outlook will no longer be listed as an available application in BlackBerry Desktop Manager.
Task 2 - Register the most current Microsoft Outlook connector
Open a command prompt.
Navigate to the following location: C:\Program Files\Research In Motion\BlackBerry\IS71 Connectors\MS Outlook Connector
Type regsvr32 msoutlookconnector.fil. Note: Microsoft Outlook will now be registered as an available application in BlackBerry Desktop Manager.
Note: After these tasks are complete, remove and re-install the BlackBerry Desktop Software. For instructions, see KB02206.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Desktop Manager 4.7 (Cannot find system in table file.)

I just updated from Desktop Manager 4.2 to 4.7 on Windows Vista for my Blackberry 8800. When I try to configure synchronization for Microsoft Outlook and click Finish I get the error message "Cannot find system in table file". I've checked everywhere and I cannot find a solution for this problem. Can anyone please help point me in the right direction? Thanks in advance!
Solved!
Go to Solution.

Hi and welcome to the forums!
Upgrading has left some files registered with the wrong or old versions of software.
See the attached link for resolution.
Thanks,
Bifocals
Please remember to resolve your thread.
Put the check mark in the green box that contained your answer! Thanks
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15278&sliceId=2&docTy...
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Cannot find system in table file

I got the 8900 series and I upgraded the desktop software to v4.7
I am trying to synchronize with outlook, but when I am configuring it when I click finish it appear this run time error 'cannot find system in table file'
I uninstalled and installed again the desktop software and there was no change.
I tried removing something of connectors and it didn't help.
Can someone please help me with this.
Thanks.

Hi and Welcome to the Forums!
Here is a KB that discusses that error:
KB15278 Receiving error "cannot find table in system file" when attempting to configure BlackBerry Desktop Manager synchronization
Hopefully it contains something useful!
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

HT4623 I cannot import my photos to my Windows xp PC after updating my iphone 5 with the latest iOS 7.1

I cannot import my photos to my Windows xp PC after updating my iphone 5 with the latest iOS 7.1

According to the iTunes download page, it still supports Windows XP.
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 3 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store
(Emphasis added)
If your XP computer was updated, then it should work. Again, the links I posted earlier contain the current USB drivers for the iPhone and Windows.

My iPhone 4 can not find network after updating to 7.0.6

my iPhone 4 can`t find network after updating to 7.0.6. i`ve reinstalled system, but nothing`s really changed.

iPhone 4S: I have the same problem. After updating to iOS 7, wifi worked for some time, and then it stopped working. I can't even enable wifi. I just updated to iOS 7.0.2 and it didn't help at all.

I downloaded the creative cloud and i cannot find adobe after effects to download. help plz

i downloaded the creative cloud and i cannot find adobe after effects to download. help plz

This has been discussed 500 million times: If it doesn't show up your system doesn't meet the requirements. Check them on the product page.
Mylenium

WiFi cannot be found after updating.

Just updated my Apple TV after it's been unused for several months. Just before the update it was all working fine and connecting to the wifi.
Updated, restarted, now it cannot find any wireless networks.
If i restart the ATV, it connects just fine but then drops connection after about 10 seconds and then reverts back to not being able to find any networks.
Ay ideas?
Thanks,

Hello mtbkr81,
Welcome to the Apple Support Communities. If you are experiencing Wi-Fi issues with your Apple TV, then the following article will have troubleshooting steps to sort you out.
Apple TV: Troubleshooting wireless connections
http://support.apple.com/kb/HT1595
Regards,
-Norm G.

Cannot find symbl method update Date(int,java.util.Date)

I get following error
cannot find symbl method update Date(int,java.util.Date) on compling class called GuestDataBean at line ( rowSet.updateDate( 4, guest.getDate() ); ).
GustBean.java. I need help on why I get it.
// JavaBean to store data for a guest in the guest book.
package com.deitel.jhtp6.jsp.beans;
import java.util.*;
public class GuestBean
   private String firstName;
   private String lastName;
   private String email;
   private Date date;
   private String message;
   //Constructors
   public GuestBean(){
        public GuestBean(String firstname, String lastname, String email,Date date,String message){
             this.firstName=firstname;
             this.lastName=lastName;
             this.email=email;
             this.date=date;
             this.message=message;
   // set the guest's first name
   public void setFirstName( String name )
      firstName = name;
   } // end method setFirstName
   // get the guest's first name
   public String getFirstName()
      return firstName;
   } // end method getFirstName
   // set the guest's last name
   public void setLastName( String name )
      lastName = name;
   } // end method setLastName
   // get the guest's last name
   public String getLastName()
      return lastName;
   } // end method getLastName
   // set the guest's email address
   public void setEmail( String address )
      email = address;
   } // end method setEmail
   // get the guest's email address
   public String getEmail()
      return email;
   } // end method getEmail
   public void setMessage( String mess)
      message = mess;
   } // end method setEmail
   // get the guest's email address
   public String getMessage()
      return message;
   } // end method getEmail
   public void setDate( Date dat )
      date = dat;
   } // end method setEmail
   // get the guest's email address
   public Date getDate()
      return date;
   } // end method getEmail
} // end class GuestBean
GuestDataBean.java/**
* @(#)GuestDataBean.java
* @author
* @version 1.00 2008/7/18
// Class GuestDataBean makes a database connection and supports
// inserting and retrieving data from the database.
package com.deitel.jhtp6.jsp.beans;
import java.sql.SQLException;
import javax.sql.rowset.CachedRowSet;
import java.util.ArrayList;
import com.sun.rowset.CachedRowSetImpl; // CachedRowSet implementation
import java.sql.*;
public class GuestDataBean
   private CachedRowSet rowSet;
   // construct TitlesBean object
   public GuestDataBean() throws Exception
      // load the MySQL driver
      Class.forName( "org.gjt.mm.mysql.Driver" );
      // specify properties of CachedRowSet
      rowSet = new CachedRowSetImpl();
      rowSet.setUrl( "jdbc:mysql://localhost:3306/virsarmedia" );
      rowSet.setUsername( "root" );
      rowSet.setPassword( "" );
       // obtain list of titles
      rowSet.setCommand(
         "SELECT firstName, lastName, email,date,message FROM guest" );
      rowSet.execute();
   } // end GuestDataBean constructor
   // return an ArrayList of GuestBeans
   public ArrayList< GuestBean > getGuestList() throws SQLException
      ArrayList< GuestBean > guestList = new ArrayList< GuestBean >();
      rowSet.beforeFirst(); // move cursor before the first row
      // get row data
      while ( rowSet.next() )
         GuestBean guest = new GuestBean();
         guest.setFirstName( rowSet.getString( 1 ) );
         guest.setLastName( rowSet.getString( 2 ) );
         guest.setEmail( rowSet.getString( 3 ) );
         guest.setDate( rowSet.getDate( 4 ) );
         guest.setMessage( rowSet.getString( 5 ) );
         guestList.add( guest );
      } // end while
      return guestList;
   } // end method getGuestList
   // insert a guest in guestbook database
   public void addGuest( GuestBean guest ) throws SQLException
      rowSet.moveToInsertRow(); // move cursor to the insert row
      // update the three columns of the insert row
      rowSet.updateString( 1, guest.getFirstName() );
      rowSet.updateString( 2, guest.getLastName() );
      rowSet.updateString( 3, guest.getEmail() );
      rowSet.updateDate( 4, guest.getDate() );
      rowSet.updateString( 5, guest.getMessage() );
      rowSet.insertRow(); // insert row to rowSet
      rowSet.moveToCurrentRow(); // move cursor to the current row
      rowSet.commit(); // propagate changes to database
   } // end method addGuest
} // end class GuestDataBean

This isn't a JSP question, it better belongs in the JavaProgramming, or JDBC forums.
But the problem is because the updateDate method uses a java.sql.Date object and you are giving it a java.util.Date object. You have to convert from java.util.Date to java.sql.Date. See: [the api for java.sql.Date|http://java.sun.com/javase/6/docs/api/java/sql/Date.html] .
Edited by: stevejluke on Jul 21, 2008 5:43 PM

IBook G4 cannot find system after update to 10.4.8 the first startup

Similar Messages

Maybe you are looking for