IBook G4 internet not working

My iBook G4 is about 4 years old. It has been working fine but yesterday the internet stopped working, which is odd because it works on my MacBook. Any suggestions? I'm not very computer savvy. Thanks!

Welcome to Apple Discussions!
Is the airport icon still in the menu bar? Is it turned on?
If so, go to System Preferences>Network and highlight Airport. Then click on "Assist me..." at the bottom and let the assistant help you to troubleshoot the connection.
That's the first thing to try. If it doesn't work, or if your icon is missing from the menu bar, post back.
Good luck!

Similar Messages

Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible. The purchase at the end of a sample book doesn't work either.

Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible. The purchase at the end of a sample book doesn't work either. Anyone have a solution?

Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible. The purchase at the end of a sample book doesn't work either. Anyone have a solution?

HT4993 why does my internet not work when not connected to wifi?

why does my internet not work when not connected to wifi

Hi farmgirl0812,
Thanks for using Apple Support Communities. This article has steps to try if you are unable to connect to a cellular network:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Ari

HT4059 ibook app is not working in my ipad2, i can see stored books but unable to open them. this happened since i hv updated to ios6. ipad wasnt jailbreak. kindly assist me

ibook app is not working in my ipad2, i can see stored books but unable to open them. this happened since i hv updated to ios6. ipad wasnt jailbreak. kindly assist me

Having the same issue, can someone please enlighten us?

Internet not working and printer connected by cable but it is unable to communicate with the compute

Changed print cartridge and then problem started.
Internet not working and printer connected by cable but it is unable to communicate with the computer

Hi Joanna 59
Sorry to hear that you are having this issue and Hope you are well;
1.Do you see any light on the back on the printer where the cable is connected?
2. Do you see lights on the back of the router where the cable that comes from the printer is connected?
3.What type of cable are using to connect the printer? Have you try another cable to see if the problem is the current cable.
Please kindly include;
What router are you using (Brand and model)
Operating system i.e. Win 7
Complete Printer model
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Internet not working after turning Airport on

Hello,
All of a sudden, I can not connect to the internet when I turn the Airport on. The signal looks strong. But when I open my browser, it gives an error page. On a cafe where there is a free wireless internet that I go to often and had no problems connecting, gave me this message recently.
IP Configuration
192.168.1.46 in use by 00:18:39:88:81:fc, DHCP Server 192.168.1.1
Is there anything that I need to update in my Airport settings? If so, where? I have been trying to look for that and don't seem to have any luck.
Thanks for any help.
Rich
G4 Mac OS X (10.4.8)

See your other thread " Internet not working after turning Airport on".

Airport: Internet not working

Airport has self assigned IP address and will not connect properly to the internet. Have tried manually entering the IP address from another computer on the same network but still cannot connect to the Internet...Any advice/suggestions much appreciated

See your other thread " Internet not working after turning Airport on".

My internet not working

I must did something to my phone and the internet not working not on my wireless or att network that odd.
Safari could not open the page becuase the sever stopped responding that the error message but dail my phone still works.

I travel between Central New Jersey and New York City everyday, and EDGE has been awful for the past two weeks. In my wishful thinking, I've been turning flight mode on and off, and resetting the phone.
After seeing this, I can relax and put up with the crappy service
Today there is nothing...nada...zippo.

Internet Connect ported over from from iBook to MacBook not working

I recently bought a MacBook to replace my iBook. Not wanting to bring everything over I chose not to use the migration assistant and opted to bring certain files and programs over via firewire target mode. One of my choices was to bring over Internet Connect since I thought that would bring over my VPN settings. I think, however, the G4 version may not be entirely compatible with the intel/universal aspects of my new and already beloved MacBook.
I can connect to the Internet without problem but when I open Internet Connect I get no signal strength indication, the base station ID is not available, checking the box to show the Airport status in the menu bar does not place the status in the menu bar (it shows up fine in the iBook and my iMac G5). The summary tab just gives me Airport link status not available but does indicate how long my current connectivity to the Internet has lasted.
Is there any fix or reinstallation for Internet Connect possible? Thanks.
iMac G5 and iBook G4 and now MacBook Mac OS X (10.4.2)

No part of the operating system from your G4 iBook is compatible with a new Intel MacBook.
You will have to replace any system files that you "brought over" from the G4 from the MacBook Installation DVD. The iBook is not Universal Binaries. That's why it is not working.
If you don't wanna use the migration, then you'll probably have to set up your VPN settings manually again.

Port forwarding for the Web server for outside Internet (not working , help!!!!!!)

Hello
I am trying to learn something new here. We have web server inside our organization its IP address is 172.16.0.35. We want outside Internet users to access web server, How is it possible? Please have a look at the running configuration. Web server is working inside the organization but not at outside. Our Static Public IP is 197.255.232.15 it is assigned to Inetrface Gigabit ATM0.1 and ISP default GW is 197.255.232.1. Let me know whats next? How do I make web server inside the organization available for outside Internet users. Thank you.
Building configuration.
Current configuration : 1983 bytes
! Last configuration change at 17:57:15 UTC Sat Jan 24 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router_test
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool test
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
ip access-group netin in
ip access-group netout out
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
atm route-bridged ip
bridge-group 1
bridge-group 1 spanning-disabled
pvc 0/35
encapsulation aal5snap
protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description Lan
ip address 172.16.0.34 255.255.255.224
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1454
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
login
transport input all
end
http://pastie.org/9858814

Hi Karsten Iwen
I deleted ( ip access-group netin in and ip access-group netout out) but it still does not work
my config :
Building configuration...
Current configuration : 2267 bytes
! Last configuration change at 15:43:06 UTC Wed Jan 28 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool my
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
no ip virtual-reassembly in
atm route-bridged ip
pvc 0/35
encapsulation aal5snap
no protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description
ip address 172.16.0.34 255.255.255.224
ip nat inside
no ip virtual-reassembly in
ip tcp adjust-mss 1414
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
end
Router#sh ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 197.255.232.15:5183 172.16.0.33:5183 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5196 172.16.0.33:5196 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5602 172.16.0.33:5602 174.129.246.27:80 174.129.246.27:80
tcp 197.255.232.15:5785 172.16.0.33:5785 31.13.93.3:443 31.13.93.3:443
tcp 197.255.232.15:443 172.16.0.35:443 --- ---

Self-Assigned IP....Internet Not Working

Hi--
Let me start off by saying I have absolutely no idea how this happened. I went to start my Macbook this morning and the Internet didn't work. Usually this is not big deal, and I just unplug the router and everything works fine. However, this time (for whatever reason) was different. When I go to my network settings, it says "Self-Assigned IP" under Airport and that "AirPort has a self-assigned IP address and may not be able to connect to the Internet." I was browsing other forums, and found that sometimes renewing the DHCP lease works. I did this, and still no Internet.
How do I fix this??
Thank you.

Hi - this may help.....I sort of had the same problem with my wired connection.
Although I think my router is dying - I hooked my Macbook directly to my modem and my network said that it had a self-assigned IP address but could not hook up to the internet (although it had green lights for the Ethernet, Network settings and ISP)....
I used the 'Automatic' location and the DCHP with manual address setting (or it was the Manual setting) - I got told that what it is doing is just randomly selecting a IP address to use but the address it chooses isn't actually able to work...
(This what I was told) - I entered my IP address (I had copied it down from previous network setups) and I had to type in my router address (even though I wasn't using one I still had to have a number for it to use) - plus a subnet address.....
After that it picked up my internet and works ok......I have to get a new router so hopefully I can connect it all up as it was before.....
This may help - although my set up is slightly different....

Internet not working - wifi connected but internet and server fail, ethernet cable doesn't work either

All of a sudden the internet on our Macbook Pro does not work. We connect through an Airport Extreme and other mac works fine. It shows that wifi is fully connected but when i go to diagnostics, i see the internet and server are failing. I tried connecting an ethernet cable and it doesn't work that way either. Have restarted and reset modem and router, nothing is working… help!

Hi ehamzic1,
Welcome to the Apple Support Communities!
I understand how frustrating it can be when your computer cannot connect to the internet. In your situation, you will need to isolate to find what is causing the issues connecting. I would recommend reading over and working through the attached article. The article should help you troubleshoot and resolve this situation.
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
http://support.apple.com/kb/HT1714
Have a great day,
Joe

MacBook Air internet not working

I have a MacBook Air and just the past couple days the internet is not working correctly. I go to Facebook and I can't scroll the screen or click anything. Other sites work for a bit then stop. I don't know if I have a virus or what is going on please help me. Also I had to use my iPhone to write this because of course my computer wasn't working.

Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
If your browser is Safari, then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Any change?
Quit and relaunch the browser. Any change?
Log out and log back in. Any change?
Are any other web browsers installed, and are they the same? What about other Internet applications, such as iTunes and the App Store?
If other browsers and Internet applications are also affected, follow these instructions and test. Any change?
If only Safari is affected, launch the Activity Monitor application and enter "web" (without the quotes) in the search box. If a process named "Safari Web Content" is shown in red or is using more than about 5% of a CPU, select it and force it to quit by clicking the X or Quit Process button in the toolbar of the window. There may be more than one such process. Any improvement?
Are there any other devices on the same network that can browse the Web, and are they affected?
If you can test Safari on another network, is it the same there?
If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

Internet not working please help!!!!

hi i jus tried to download abode falsh player on my computer. it all downloaded fine and then when i went to go onto the internet my main search page is called babylon. the computer lets me on the internet and then as soon as i log onto facebook hotmail etc it comes up with internet explorer not working.it goes to troubleshooting but comes up with nothing wrong,what have i done??? i need to be able to log into my hotmail as i do all my own work invoices and have to sent them on but my computer now wont let me.please help. ive deleted all the things i downloaded and turned the computer off but still made no difference.please help thanks

steph,
Please re-state your premise.
1) Did you actually download and install an alleged adobe flash player, or not?
2) Was this download a "pop-up" during a browser session, or a "pop-up" on the taskbar?
If it pops up from the browser session, always ignore it. Go to the offical webpage and then download.
3) Was "babylon" your original main search page, or did you get it with the download install?
You could attempt to fix it with a restore point prior to the install of this program.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

"Open In" functionality with .ibooks file does not work

I am using the latest iBooksAuthor v2.2 and exporting an iBook to the .ibooks file format. I have tried with and without a version number. When I import the .ibooks file using the "Open In" functionality on the iPad it opens in the iBooks app. However, if the book is already in iBooks it does not overwrite the existing iBook with the new file that has the changes I have made. Am I missing a setting somewhere to ensure this works?

Hello kbbean,
The resource below will explain how to publish and update to your previously published book in the iBooks Store:
iBooks Author: How to update your published book in the iBooks Store - Apple Support
http://support.apple.com/en-us/HT202443
Learn how to update a book that you published to the iBooks Store.
Before you can publish an update to your book:
You must have a Paid Books Account or Free Books Account.
You must have submitted your book to the iBooks Store at least one time.
You must install iTunes Producer on your Mac.
You must install iBooks Author 2.0 or later. We recommend the latest version of iBooks Author.
Your book’s file size can't be larger than 2 GB.
If you want to update your screenshots, use Contact Us in iTunes Connect. You can't update the screenshots that appear with your book in the iBooks Store via a redelivery. You can add screenshots to iTunes Producer only the first time you publish your book.
When you're ready to publish an update to your book:
Open the book (.iba file) that you'd like to update in iBooks Author.
Make the desired changes to your book.
Click Publish in the iBooks Author toolbar, or choose it in the File menu.
Follow the prompts until you reach the Add Version Info screen.
Select "This is an update to a previously submitted book."
Click Continue.
Choose which of your previously published books you'd like to update.
Enter a new version number. The new version number must be higher than the version number that currently appears on the iBooks Store.
Click Continue and follow the prompts.
iBooks Author will export your updated book to iTunes Producer. Follow the onscreen instructions in iTunes Producer to publish your updated book to the iBooks Store. Most of the required fields will be filled in for you, but you'll need to include text in the What's New field to update your book.
Last Modified: Nov 8, 2014
Have a great weekend!
- Judy

IBook G4 internet not working

Similar Messages

Maybe you are looking for