Ibook G4 (mid 2005) Bluetooth Issue

I am having trouble with my bluetooth firmware updater it says "This version of the updater is missing the firmware file cannot proceed". I misplace all of my install discs like a moron. do i need the install discs or can the fix be downloaded.

The Apple Hardware Test included within the original software package
the computer shipped with may be helpful in determining the cause of
the issues; and the correct one is in those discs you no longer have.
+{Or, according to another post, discs you recently acquired. Usually+
+these replacements are DVD media, if the computer originally had+
+this kind of media and if the drive was a DVD combo or superdrive.+
+The iBook G4 mid-1005 did not ship with a CD-ROM drive, so the+
+media discs would be DVDs.}+
You may be able to order a replacement installer disc set for that iBook
from the Apple store online, by calling their sales support main phone
number (as indicated in the web page header, usually) and be prepared
with the serial number of the computer on the ready; and a means to pay
a fee for the replacement disc set, should they be available still.
There is a possibility the bluetooth/wi-fi module itself may have failed,
in which case you may have to get and replace the one in the computer.
That part is on the logic board and has a connector and a bolt/nut that
holds the electronic part to the logic board. There are manuals for free
on such sites as http://ifixit.com/ for the repairs and take-apart details.
Hopefully this helps somewhat.
Good luck & happy computing!
{ edited }

Similar Messages

  • IBook G4 (Mid 2005) - AirPort 'disappeared' - Help!

    Hello.
    I'm an owner of an iBook G4 (Mid 2005) @ 1.33GHz.
    It's been working perfectly since it has been bought. Till yesterday...
    It came with Tiger, but some time ago I ordered Leopard. Everything was still working fine. But few days ago I decided to update OS to 10.5.2. After that it was still OK.
    I use XAMPP (Apache Distribution with MySQL and other stuff). It set up permissions for 'nobody' on /Applications/xampp where I keep my site's files. Every time I wanted to save a file there (using BBEdit) I had to authenticate.
    Yesterday, I got back to work on my site and when I tried to save a file and authenticated - whole system just freezed. But before, Software Update showed up and said that the Leopard Graphics update is ready to be installed, but I didn't want to update that time so I closed it.
    I think that might be caused by some permissions' violation between some applications using that directory (I had few web browsers open, and my server was accessible via AirPort at all). I hard-reset my iBook.
    When Mac OS got loaded - I noticed that my AirPort Extreme card is no longer recognized.
    http://www.wroclaw.mm.pl/~kaziorvb/no_airport.png
    http://www.wroclaw.mm.pl/~kaziorvb/no_airport2.png
    That was really weird.. It just disappeared..
    First, I tried resetting PMU. No result. Also reset PRAM. Then safe-booted.
    Amazingly - AirPort was back! So I decided to reboot and just get back to work, but it disappeared once again. Tried resetting PMU and PRAM again and again, but with no results... I shut it down and opened it.
    It's the last revision, so the AirPort card is not normally accessible.
    Closed it, and booted once again. Still no AirPort...
    I installed that update mentioned before by downloading it manually from Apple Downloads. It didn't change anything.
    As I borrowed my Leopard Install DVD to my friend who's got a new iMac and lost his own, I performed a Hardware Test using my old Tiger (10.4.2) Installation DVD.
    It didn't find any problems:
    Test Results
    AirPort - Passed
    Logic Board - Passed
    Mass Storage - Passed
    Memory - Passed
    Modem - Device found (What about this one? Is it normal?)
    Video RAM - Passed
    and in the Hardware Profile:
    Communication
    Ethernet HW address: xxx
    AirPort card: AirPort Extreme
    Bluetooth: Present
    FireWire devices: Not present
    It all just appeared to be OK, and my issues were only software-related.
    I thought of performing a clean Mac OS X Tiger installation, so I started making backup.
    Booted normally and again, the AirPort was back! Found my home network, typed in the password and successfully connected. After a while I got a kernel panic, so I had to restart the machine.
    Again, AirPort was on. This time I managed to connect to the internet. Did all the backup, but then I got another kernel panic. I reset the PMU, what resulted losing AirPort again.
    I thought that system reinstallation will fix all my problems, but I was wrong. Freshly installed Tiger couldn't see the AirPort card. Same after update to 10.4.11. I did all the PMU, PRAM, safe-booting tricks, but never resulting.
    I also tried typing 'reset-nvram','set-defaults' and 'reset-all' in the Open Firmware console or typing 'sudo touch /System/Library/Extensions/' in the Terminal. Still no results.
    What should I do ? I really don't want to pay boatloads to get it repaired..
    Help
    kaziorvb

    Thanks for your response.
    Anyway, I fixed it manually using Warren's tutorial @ Applintosh.
    Thank you, Warren!

  • How to install Mac OS 10.1 on iBook G4 mid-2005

    Hi. I have just bought a vintage copy of Mac OS 10.1 for my iBook G4, not realizing that I can't strictly speaking install the OS on the machine. I read that some people have done it, but I am running 10.4.11, and I was wondering how I can dual boot and install 10.1 on a different partition, as the earliest OS was 10.3 Panther. Thanks!
    -jonasfromwa

    Rather unlikely Puma 10.1.5 would be able to support booting a later model mid-2005 iBook G4 that shipped with Tiger 10.4.x -- As Puma was intended to run on G3 PPCs, that often would have booted in OS 9 by default. And used rather different firmware in specific hardware for the old PPC G3 to use OSX on vintage chips. A real headache zone. I'd rather have seen some more parallel development of OS 9.2.2... Almost as good as Tiger 10.4.11 as a fine OS.
    I vaguely remember Puma as a 'vast improvement over the OS X Public Beta of Sept 2000' which some foolishly installed on their workstations.
    Use older Vintage hardware with partitioned hard disk drives, and watch for those which supported FireWire (iMac400DV was a good one) because you could use an external hard disk drive. Maybe even boot clones, etc from there. With all the limitations on the early hardware that made first practical use of OS X nearly impossible, a newer machine at the other end won't support an antique operating system readily if at all. Not without writing some code; and there probably are firmware considerations beyond the scope of reason. Better to get the correct hardware for the vintage experience.
    Makes me tired just thinking about it!
    Good luck & happy computing!

  • Ibook G4 (mid-2005)

    Please help! I have an ibook G4 that came with an airport card installed, it broke when my computer fell and I would like to replace it with the new airport exttreme card, which i have purchased. how do I do this? the manuals I have found are for the older models of the ibook g4...

    I think you may have done.
    iBook G4 12" 1.33 GHz or 14" 1.42 GHz Airport/Bluetooth Board

  • Ibook G4 (mid 2005) dual displays

    Greetings fellow mac users!
    I have a ibook G4 1.33 Ghz and I want to connect it to a projector. I understand that I would need a vga adapter but I want the ibook screen to display the software interface and I want the projector to show the composite video that the software is generating. I don't think the vga adapter would accomplish this but correct me if I'm wrong. Is what I want possible with the ibook?
    Thanks for any advice anyone can give!

    Hi,
    The projector will display the Desktop or any application on top. What you want to do should work as long as you normally see those elements when the app is running.
    You should have received a VGA adapter with your iBook when you bought it. They were included with all iBooks.
    John

  • IBook G4 (mid 2005) RAM installation instructions

    I'm looking for instructions on installing 1GB of RAM in my iBook. All the references to instructions are for 2004 models. Are the instructions the same for mine?

    The directions are in the User's guide on Page 53. You can download the User's guide by clicking http://manuals.info.apple.com/enUS/iBook_G4_Mid_2005_UsersGuide.pdf

  • IBook (mid-2005) keeps booting into Safe Boot

    My nephew's old iBook 12" 1.33 (mid-2005) has a curious issue. Every time he restarts, the screen reports Safe Boot., even though he's holding down no keys to get there. I had him check in case any keys were stuck, especially the shift keys, of course, but all were functioning normally.
    He's restarted several times, to no avail. He can't escape from Safe Boot.
    Anyone know why this would be happening?
    Thanks

    Hi, Niel--
    Unfortunately, I forgot to mention I had already tried that to no avail. The only thing that's worked so far is something he did by accident.
    I told him to restart into single-user mode to use fsck on it. I said to hold down the S while restarting. He never let up on the key until the words, Booting into Max OS X appeared. Somehow, holding down the S through all that rebooted him normally. I still don't quite know how.
    But he still can't reboot normally without going through single user mode even after that. I'm baffled.

  • G4 iBook 1.33 (mid-2005) airport card install instructions?

    I asked this question in an earlier post but the title was misleading, I think.
    I need to reseat my Airport Express card and I don't know where it is or how to do it. Please point me to the appropriate URL that has diagrams.
    I've searched and searched and can't find it.
    ibook g4 1.33 12"   Mac OS X (10.4.7)  

    In case you haven't already found out, the 1.33 (mid-2005 model) iBook is the only model without user-access to the airport card. In order to have it re-seated or replaced, you have to take it to an Apple Tech.

  • Extremely Poor WIFI. Now have Bluetooth issues.

    I have been having an extremely poor WIFI connection. I recently upgraded to 10.4.6 and noticed this problem. Is there something wrong with 10.4.6 that would cause this or is it an internal problem with my PowerBook? Also is there anyway to check the AirPort card on my laptop?
    Well I am editing this to add another issue, i just noticed that my blue tooth just went unavailable. My bluetooth icon in the menu bar has a squigle through it. When I click on it it says that it is not available.
    Thanks in advance.
    Christopher McConkey
    Message was edited by: cmcconkey

    As far as the wifi connection, powerbooks are notorious for poor reception. I haven't heard of 10.4.6 causing any new issues, but people have been complaining about the powerbooks' reception for a long time. iBooks and most pc laptops get better reception. In newer aluminum models, you can't check the airport card. It's inside the unit. In 1.25 aluminum powerbooks, I know you could access the airport card through the battery bay.
    For your bluetooth issue, I'd recommend restarting first of all. If that doesn't help, I'd reset your power management unit. You can find directions for your particular model here:
    http://docs.info.apple.com/article.html?artnum=14449
    If that doesn't help, I'd boot from your software disc and run disk utility.
    Let us know if that does any good.

  • Airport Extreme (Mid-2005)

    Not exactly sure if this is where to post, but if there are any moderators that see's this being in the wrong place, please move it if you could.
    I have Mid-2005 AirPort Extreme, 20mb per/s internet (Broadband) and I'm getting 4mb - 6mb per/s, I believe that the AirPort is just getting old and it worn out. 4 Laptops have used it for 3 years. For the past four months, 7 computers have been connected with it. I've reset the configurations to it's maximum, I keep checking to make sure that it won't change. *Anyway possible that I can make it so it's doesn't make the computers have a weak signal and have slow internet connection without buying a new one just to save $180? I have considered an new one though, not much of a problem.*
    I'm sure it's not the internet, I've used the cord from the internet modem and plugged it into a computer and tested it at "SpeedTest.net" and I get 17 - 19 MB per/s.
    Help is very appreciated! Thanks!

    Wildmnky247, welcome to the discussions!
    I can't speak for other users of course, but the likely reason that you have not seen a response to your original post is that we simply don't know.
    You're asking about performance in your network, but didn't tell us anything about one of most important elements....the quality of your cabling. The regular contributors to the forum do not engage in guesswork and rarely offer a personal opinion on an issue. You are really asking for both in your post.
    You say that you believe that your Extreme is old and worn out. I take that at face value. Why not investigate whether Apple will allow you to return a new Extreme for credit or refund within a short period if you don't feel that it offers improved performance in your network?
    Please post back on your findings to share with other users if you decide to make changes in your network.

  • Bluetooth issue in ios 7.1

    I am facing the Bluetooth issue in ios 7.1 iphone.In ios 7.0 it works fine without any problem.I am using the EA framework for reading/writing the data in my application.Still I have not got any correct solution for this scenario. I am having a doubt that this issue is happening as because of EA framework which I am using it or do i need to change any settings.Could someone tell me the solution for this problem?

    1.I am using an external Bluetooth kit by which I will send the command through my iphone application.I will communicate with the external Kit through a command that writes and reads the data using External Accessory framework.In lower version except IOS 7.1 i was able to communicate properly without any issues.In EA framework implementing a delegate method I could able to write/read a data.
    2) Right now I am facing an issue only in ios 7.1 where I was not able to read any data from the external Bluetooth Kit.I have researched regarding this issue in all the sites I got to know some information that because of EA framework issue in ios 7.1 where I am able to communicate.But still I have a confusion that its happening because of EA framework or any other ios issues.

  • I need help with BlackBerry 8820's bluetooth issue

    Hi!
    Please accept my appology of my poor English.
    My 8820 has a bluetooth issue with Bluedio E9+ headset. It must be note that the headset works well with another phone (not BlackBerry). My BlackBerry can't actively connects to bluetooth headset by the method 'Menu' key > 'Connect' option, but still able to receives connection request from the headset and pairs with the headset when i choose Yes. At this point I can use bluetooth function for data transfering, Voice Dialing and music playback (i.e. mp3 files). But each time I try a mp4 file with default video player in Media folder, its audio will never work with the bluetooth function, and the phone's speakers is automatically enabled. I try the menu when the video was playing, but there are only Activate Handset and Active Speakerphone options. Then I was converted the file with BlackBerry Video Converter Pro; I remove and reinsert the battery; I wipe the phone and install new ROM,... But none of them work.
    Please help!
    TheME® ToanDuong™
    Copyright © 1986-2015.
    Mama MiraTech, Co. Ltd.
    All rights reserved.

    This was an unintended result of an intentional change to fix how Premiere Pro handles spanned MXF clips. To learn a bit more, please consult this thread: http://forums.adobe.com/thread/1358012?tstart=0
    Look for the workaround recommended by PPRO developer Wil Renczes.

  • Satellite U500 - Bluetooth issues BT Monitor vs. Bt Stack

    Hello everyone,
    My wife's machine is a Satellite U500-10L PSU5EE-002003AR, now with Windows 7 Professional 64-bit (originally with Vista pre-installed, later with W7Pro 32-bit.)
    Now, I've always had various issues with Bluetooth on this machine, and it's the only machine I've ever had Bluetooth issues with, mostly having to do with internet connectivity via mobile phones.
    Most usually, I connect to the internet using Sony Ericsson PC Suite and a Bluetooth-controlled Sony Ericsson mobile phone (currently and Elm, and occasionally a Hazel or a C702.) This setup has always worked flawlessly on every other machine I've used, such as my Getac B300, the old HP Compaq 6710b given to me by my previous employer for a couple of years, and even my untrustworthy old Thinkpad T42 (now deceased), and my mother's ancient Macbook. With those machines, I've never had any trouble connecting to any of the phones or to the internet, with no drops, connection issues or any other issues.
    Not so with this U500. I'm writing this while connected through PC Suite, with Bluetooth Monitor 4 as the hardware controller. The connection is intermittent at best, usually unreliable, and sometimes downright impossible. Sometimes it works flawlessly for days on end, and sometimes it just refuses to work. Generally, though, I get a connection more often than not, but the issue is annoying nevertheless.
    Now, I tried a different approach: I uninstalled Bluetooth Monitor and SE PC Suite, installed the Toshiba Bluetooth Stack and tried to connect to the internet directly through the BT Stack. I paired the Elm to the U500 successfully from the BT Stack control panel and managed to dial the connection, so far so good. But I had no internet access whatsoever. Now, the phone shows that it's actually connected, and so does the BT Stack control panel and the Windows 7 connectivity monitor in the system tray, but there's no actual access to the internet (I only get the little yellow triangle with the +no internet access+ message, but the phone is dialed in.)
    So, I tried reinstalling PC Suite (with BT Stack present), and things got even worse: now the BT connection itself between PC Suite and the phone is only sporadic and intermittent, but sometimes it just works well enough to actually get a connection (albeit an unreliable one.)
    So now I've uninstalled the BT Stack, reinstalled BT Monitor and went back to using PC Suite for dialing, and the same issues I mentioned earlier still persist.
    Now, my two questions are these: a. why didn't I get any internet access with BT Stack, even though the phone was actually dialed in to the connection? and b. assuming the internet access issue is resolved, would I possibly get a more reliable connection (i.e. one that doesn't suddenly decide to drop every so often) with BT Stack instead of the PC Suite/BT Monitor setup?
    Thanks in advance.

    Just an update: I've found that as long as there is a direct line of sight between the phone and the U500, there would be no issues. The Bluetooth connectivity issue only starts to appear whenever there's something - anything - in the way between the two.
    Let me clarify. Now I'm sitting at my desk, with the U500 right in front of me, while the mobile phone is hanging from a nail in the wall above me and to the left. Now that there's a direct line of sight between the phone and the U500, I have no issues at all.
    Now, let's say I take the U500 off the desk, put in on my lap, and turn my back to the phone. In this case, my head and torso would be in the way of a direct line of sight between the two, and the stability of the connection begins to deteriorate, and it becomes very unreliable - sometimes even dropping the Bluetooth connection altogether (Sony Ericsson PC Suites goes all gray on me!)
    Here's another example: there's a printer sitting on the desk right to my left. Now, if I stack up a bunch of magazines on top of the printer, high enough to be within the line of sight, I will start having issues!
    So, I'm pretty sure it's a Bluetooth connectivity issue, and has nothing to do with the internet connection or firewall. It's clearly a hardware quality issue.
    By contrast, I never experienced any such issue with my B300, the HP Compaq 6710b I had earlier, or even with my now-deceased ThinkPad T42. Hell, I might as well have gone into a different room entirely and still maintained a Bluetooth connection with those three machines! With the Toshiba, though, as soon as I carry the thing out the door - which is about four feet from the phone - the connection is gone!

  • Bluetooth Issue ENVY dv7 C2Y65AV After Win 8.1 to Win 7 Downgrade

    My laptop is an ENVYdv7 C2Y65AV
    It originally came with Windows 8.0, and I upgraded later to 8.1.
    I never liked 8.0 or 8.1 so I “downgraded” to Windows 7 Professional. I did my research, realizing there may be issues. I downloaded drivers, bought a new hard drive, etc.
    All went better than expected and I am happy with the “downgrade”, save for 1 issue.
    1- I am having difficulty getting my Bluetooth to connect completely to any of my devices (headphones or headset).
    My WiFi works well, I believe the Bluetooth 4.0 is part of the Intel Centrino WiFi card . When connecting any Bluetooth device, it does show in the Bluetooth devices screen. It will discover it and “connect” to it, but nothing happens when I try to use them. The sound still comes from the laptop speakers.
    I have the Intel Centrino Wireless N 2230 BNHMW that came with the laptop. It worked well with Windows 8.1. All my Bluetooth devices paired easily with the laptop when Windows 8.1 is running.
    I have been to Intel's website, made sure my driver for the wireless card for Windows 7 is the correct and latest version. They have a software utility that installs on your laptop, then searches and downloads the correct, latest version.
    I downloaded all the drivers for this downgrade from HP's (this) website's software and driver support section. What a great resource this site is!
    Suggestions? Advice?
    I appreciate any help!
    Thank you,
    James
    P.S.
    An interesting thing about Windows 8.1.
    When I installed Windows 7 Professional, I bought a new SSD hard drive just for this purpose. I had saved my pulled hard drive with Windows 8.1 on it just in case this downgrade didn't fare well.
    Just for grins, I added it as a second hard drive (later) in case I needed to get missed files.
    When I rebooted my laptop, I went into the boot manager, and selected my primary drive with Windows 7. It booted up normally.
    Then seconds after booting, a message popped up saying I needed to reboot for the changes to take effect. I didn't recall making any, but figured something had updated?
    So I did. I rebooted and Windows 8.1 took over, and changed files on my SSD hard drive (win 7 drive) that ultimately disabled that drive from booting Windows 7.
    Trying to boot into the Windows 7 hard drive froze right after the Windows 7 splash screen.
    I pulled the plug on the Windows 8.1 hard drive, rebooted to Windows 7. Before I could though, it had to scan the hard drive for changes, and correct them. Then Windows 7 booted up normally.
    This Windows 8.1 sure is controlling. Can you say “Hal” from the movie “2001 A Space Odessay”
    This question was solved.
    View Solution.

    Thank You Pepe999,
    This Bluetooth issue has been resolved by following your suggestion and replacing my WiFi/ Bth card with a new Intel AC 7260.
    Worked like a charm...Thank you!
    Now my Windows 7 "downgrade" is complete. ALL is working, and working better for me than the windows 8.0 an later 8.1 it had.
    James

  • 8.2 iPhone 6 + bluetooth issue

    Up until 8.2, my bluetooth connectivity with my VW Passat was just fine.  I could stream music, make calls using the steering wheel controls, etc.  When a call came in, music would cut out, caller id would show on the phone and I could answer the call using the steering wheel controls.
    This worked for my iPhone 4, iPhone 5 and iPhone 6+ up until this latest iOS update (8.2)
    Now, when a call comes in, my car will ring, the phone stays with a black screen.  After 2 rings, my iPhone 6+ begins to ring and the caller id shows.   If I was using the music app, the music will cut out when the phone rings (as it should), but as soon as the phone is answered, the music begins playing again over the call.
    I can no longer make a call using the steering wheel controls.  After saying 'call' then the name, the car disconnects the phone.  Again, this has never happened with any of the iterations of iOS with iPhones and this car up until 8.2
    I can, however, make calls using the iPhone 6+ and Siri, using the car speaker and mic.
    I've noticed other glitches in iOS 8 (all versions) but this bluetooth issue is most annoying and dangerous.  It has now removed Hands Free from my car and forced me to use the handset if calls are made or come in.
    Has anyone else seen similar issues on 8.2?  I've cleared the Bluetooth settings and restarted the phone many times and I can't seem to get it to work correctly.

    Yes, I have exactly the same problem with all our VW & Volvo at work. iOS 8.1 iphone 6 & 6+ Bluetooth 4.0
    now, we have bought some other smart phone with latest 4G+ technology : no more problems good connectivity
    we used old iphone 4 with iOS 5.1.1: the Bluetooth connectivity was fine, but no 4G+!!
    by by apple

Maybe you are looking for