IBook G4 not seeing the Hard Drive

My iBook G4 does not see the hard drive. When the computer turns on I get the flashing smiley face in the folder. When I put the disk for the computer in then the computer starts up but cannot see the hard drive so I cannot get into anything. I even put the computer in safe mode to see if I could get it to work and I couldn't. I had a friend who works on computers look at it and he said I needed a new hard drive. So I changed out the hard drive and the computer worked fine for 3 days and then it did the same thing. I'm not sure if there's a problem with the logic board or really what is wrong with it. Please help

Cantobellus:
So I changed out the hard drive and the computer worked fine for 3 days and then it did the same thing.
This seems to suggest that your HDD may not be the problem. Try the old HDD you removed by putting it in a firewire enclosure and connect it to the computer and see if you can boot the computer from it. I experienced a similar issue with a iBook G4 which is detailed in the thread Could it be the logic board?. Your issue may be different, but the thread may give you some ideas for troubleshooting.
Cheers
cornelius

Similar Messages

  • My new airport extreme does not see the hard drive

    I have a new airport extreme with a hard drive connected to the USB port but the airport can't see the disk. I verified the firmware and is 7.7.1
    http://support.apple.com/kb/DL1665
    Disk was working good but after Mavericks, the problem start.
    Any suggestion?

    I had problems adding Airport expresses using Airport Utility. However I found it worked fine if I used the manual set-up option and not the Assist me option.
    Reset the airport express then, in manual set-up, set the express to 'join an airport network' add the airport network password and see if that works

  • AirPort Extreme does not see printer, hard drive, AirPort Express!

    I just got an AirPort Extreme (802.11n), to replace my AirPort Express. I have a Brother 665CW wireless all-in-one printer, which had worked perfectly but now I cannot find it. I have also hooked my USB hard drive into the Extreme. I can see the hard drive in the AirPort Utility, but I don't know how to find it from my iBook. I'd also like to put the Express in another room to use the AirTunes feature. Unfortunately, almost nothing is working!
    Here is how it's set up:
    Den:
    AirPort Extreme - hardwired to:
    - DSL modem
    - hard drive (via USB)
    Brother 665CW (wireless)
    Living Room:
    AirPort Express
    Advice would be appreciated. I'm usually able to troubleshoot my problems, but documentation on this Extreme is really bad! Thanks!
    iBook G4   Mac OS X (10.4.9)  

    I had problems adding Airport expresses using Airport Utility. However I found it worked fine if I used the manual set-up option and not the Assist me option.
    Reset the airport express then, in manual set-up, set the express to 'join an airport network' add the airport network password and see if that works

  • MacBook Pro can no longer see the hard drive

    I've got a MacBook Pro Core 2 Duo, 15-inch.
    Okay, so I was chasing the nazis out of North Africa in Call of Duty 2 when the game froze. Command-Option-Escape was unresponsive, so I held down the power button to shut the whole thing down. When I brought it back up, I got the flashing folder icon.
    After yelling a few words I shan't repeat here, I booted off the installation DVD, then started up Disk Utility to try to repair the disk. However, Disk Utility only sees the DVD; it doesn't see the hard drive at all. Neither does Startup Disk or System Profiler. (The hard drive would be under the ATA section in System Profiler's menu, right? It only shows the DVD drive.) If I try to go ahead with the OS X installation, at the "Select a Destination" screen, where the list of disks should be is disturbingly blank. So according to every method I've tried so far, it's as if my hard drive has been entirely disconnected.
    This was my Christmas present, and I was hoping to get at least two years out of it, not two weeks. Anyone have any idea how to get this beautiful machine back on its feet again? I'm familiar with Unix and not afraid of using the command line, but I'm not sure what to try there.
    15" MacBook Pro C2D   Mac OS X (10.4.8)  

    Okay, second question: How does this forum software work? According to the thread list, someone named MacWizard has replied to this thread, but I can't see it.
    MacWizard, if you could email your reply to spearbrave at gmail point c0m so I can read it there, I'd appreciate it.
    15" MacBook Pro C2D Mac OS X (10.4.8)

  • Imac will not see my hard drive on start up, wants to start from network start up disk that does not exist. How to get rid of it? So there is just one choice / my hard drive.

    I have a Intel duo Imac. Everything has been running relatively smoothly for a few years now. All of a sudden my computer will not start. I get the flashing folder with a question mark.
    When I go to Start up disk in my system perfernces while the computer is on. I see 2 possible choices. One is my hard drive with the operating system shown. The other is a non-existant Network Start up disk with a question mark in it ( looks like a hard drive with a question mark and it say's its a "network start up disk).
    All I think I want to do is get rid of the Network startup with the question mark. I can not find anywhere how one can just remove an old or non existant start up disk without reformatting.
    I believe this came from a clients hard drive who had a network system on it. We no longer have that drive. It no longer exists. But a latent icon shows up in start up disk.
    When I go to change the start up disk. I can change it to either the hard drive or the network with the question mark. But when I select my hard drive and then got to restart the computer. I get the flashing folder with a question mark on start up. I have also seen the flashing globe a couple times.
    When I attempt to run disk utility from may install disk ( holding down "C" on start-up ). Disk utility does not see my hard drive. Just the Apple install disk with the disk utility on it.
    What can I do to remedy this short of re-installing? Will a program like Disk Warrior or Tech Tool help?

    Thank you. That's what I thought will need to happen.
    One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
    I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know?  It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
    Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
    Just trying to put a band-aid on it for another couple weeks.

  • Time machine not seeing external hard drive in time line

    can anyone help
    time machine not seeing external hard drive in time line
    before 2013
    information say in 2009 is not accessable to view this
    i must select external drive from finder
    the time machine icon not recognising

    thanks for reply
    when i open time machine the time line on right side of page
    has date ranging from 2014 back to 2010 but only highlight date from 2014 back to 2013
    anything before 2013 is greyed out and cannot not be selected
    when i touch the pages they only rush towards me a limited amount then stops
    also why it shows date as 2014 is strange

  • DNG Converter Not seeing my Hard Drive(s)

    DNG CONVERTER not seeing my hard drive....none of them.
    Any help will be greatly appreciated....THANX.

    Platform: Macintosh or PC?  Exact versions of the OS and the DNG Converter?  Details about your setup?  How is the drive formatted?
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
    Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
    Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
    If it does contain data...
    http://support.apple.com/kb/TS2474

  • How do I deauthorize my ibook G4 and wipe the hard drive clean?

    How do I deauthorize my ibook G4 and wipe the hard drive clean?

    Launch iTunes. From the menu bar click Store / Deauthorize This Computer.
    (Mac OS X 10.4): Erasing a disk or volume
    Or...   Mac OS X 10.4): Erasing disks securely

  • HT1338 My macbook pro(2010) is not reading the hard drive, but the hard drive works through the USB?

    Hi everyone,
         My Macbook pro(2010) is not reading the internal Hard Drive. At first I thought it to be a hard drive gone bad, so i bought a new hard drive. My macbook is still not reading the Hard Drive. I am able to use the original hard drive through a external(USB) connection. Also, when the macbook turns, there is a redelling sound. Can anyone offer me any suggestions to what the problem might be?   

    It sounds like the internal cable connecting the HDD to the logic board is improperly connected or faulty.  An appointment at an Apple genius bar might be a good option.  The repair should not be too expensive.
    Ciao.

  • I can not access the hard drive connected to my airport extreme!  Any thoughts?

    I can not access the hard drive connected to my ariport extreme.  When I use the finder to connect a server and type in the IP of the a. extreme, 10.0.1.1 it does not work and I get an error message.
    Any thoughts.
    A

    Is the hard drive formatted for Mac in Mac OS Extended (Journaled)?
    If yes, you may need to use a powered USB hub since the USB port on the AirPort Extreme is under powered and it is often necessary to use a powered hub....even if the hard drive has its own power supply
    If both items check out above.....have you checked Finder Preferences to make sure that "Connected Servers" will be displayed?
    Finder Preferences > General > Show These Items on the Desktop > Connected Servers
    Then with the Finder menus displayed at the top of the screen click the Go menu
    Click Network and the AirPort Extreme icon should be displayed
    Double click the icon to mount the drive on the desktop

  • Installer not seeing my hard drive

    Hi all,
    I'm running the VM installer on a new machine. The machine has a 750Gig SATA hard drive on it.
    It's not detecting the hard drive.
    I'm assuming I need some kind of driver for this.
    Do I download an .rpm package for this?
    How do I apply the driver during the boot/installation process?
    Thanks
    John

    Hi,
    According to the specs from HP on my machine, the machine has the following motherboard:
    * Motherboard manufacturer's name: ASUS M2N78-LA
    * HP/Compaq name: Viola-GL8E
    According to the site where I purchased the machine, the motherboard uses the chipset:
    Chipset NVIDIA GeForce 8200 Chipset
    Just for giggles, last night, I downloaded OpenSUSE 11 and installed it. The installation went flawlessly. I would like to experiment with Oracle VM though.
    I would also like to report that both Oracle VM 2.1.2 and the latest version of ORacle Enterprise linux have the same problem of not detecting my SATA hard drive.

  • A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive.  Does anyone know why this is happening?

    A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive.  Does anyone know why this is happening?

    The beeps could be caused by something as simple as a loose internal wire or connection.  If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
    If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose.

  • Installation not seeing the entire drive

    Hi,
    I'm trying to install Solaris 10 x86 on an IBM Xseries 345. Its got an LSI Logic 1030 RAID controller in it. It used to have a pair of 30G drives that were mirrored (via hardware) and had Solaris 10 on it.
    I've upgraded the drives to a pair of 72G. I want to keep the same mirroring. Now when I run the install, the Solaris interface thinks there is only a 4G drive in the system! If I break the RAID, it sees the full 72.
    Has anyone else seen this? Note that this controller isn't in the HCL, but I was hoping things would work out as it was pretty happy with the mirrored 30G drives.
    tia,
    -y

    Cantobellus:
    So I changed out the hard drive and the computer worked fine for 3 days and then it did the same thing.
    This seems to suggest that your HDD may not be the problem. Try the old HDD you removed by putting it in a firewire enclosure and connect it to the computer and see if you can boot the computer from it. I experienced a similar issue with a iBook G4 which is detailed in the thread Could it be the logic board?. Your issue may be different, but the thread may give you some ideas for troubleshooting.
    Cheers
    cornelius

  • My time capsule does not see external hard drive

    I just got a new time capsule and am hoping to use it as a wireless bridge and NAS. 
    I've got it set up as a bridge and that seems to be working correctly, but when I plug my external hard drive into the time capsule, I can't see that external drive show up anywhere.
    Has anybody else run into this issue?
    The hard drive is a WD Elements 3 TB USB 2.0 Desktop External Hard Drive - WDBAAU0030HBK-NESN.

    I can't see that external drive show up anywhere.
    If the drive is formatted correctly and communicating with the Time Capsule, then it will be displayed when you open AirPort Utility, click on the Time Capsule icon, click Edit, and then click the Disks tab at the top of the next window. Example:
    Remember that since this drive is a "network" drive, it will not be displayed on the desktop until you manually mount the drive.

Maybe you are looking for