IBook G4 screen broken, can't use external Display
hi folks:
I have a late model G4 iBook (which is outside of the logic board replacement program) that the screen broke and i've been trying to get the external display adapter w/my monitor to work but I can't seem to get it to switch. i can boot the ibook and get the Mac boot 'tone' and it boots (and I can use the volume control buttons (I can hear them working) once it's fully booted (although I can't see anything to tell if it's booted)...and i can see in my router logs that it attempts to get an IP address from my DHCP server..so i know the iBook works, i just can't seem to get it to switch to the external display with the cable attached to the side of my iBook. I've tried resetting the PRAM and fn-F1 to switch to the external display, but nothing seems to work.
i can't afford to fix the broken display, so I wanted to set this up as a mini-desktop..and of course i'd like to get my iTunes music off of the machine along w/some pictures and stuff.
Any ideas guys, i'm at my wits end and not sure what else to try.
Thanks again.
-c
Ps..even if there's some way I can 'hack' into my OWN box and just use remote desktop to control the iBook from my other mac...that would be ok too...
THANKS GUYS
Connect the two Macs with a FireWire cable and start up the iBook with the T key held down. You should then be able to copy off all the files you need from the iBook's hard disk.
(16304)
Similar Messages
-
Can't use external display w/o magsafe connected while lid is closed
I've got the latest 15" MBP with Retina Display. At work I connect it to a 23" Cinema Display and at home I us a 20" Cinema Display in my studio.
The desk I'm using isn't big enough to host my MBP with the lid up with my 20" display side-by-side , so I have to keep my MBP folded all the time. When it is folded I have noticed that I need the MagSafe adapter connected all the time, or else it will not let me use my 20" display or the USB ports. This means that I can't use my Apogee Duet via USB either, if I don't connect the MagSafe adapter.
Now you might think "well, you're at your desk, just connect the adapter and be happy". I would love to, but the thing is that I record lots of guitars in my home studio and when my computer is powered by the magsafe and I've got a guitar amp running I get lots of humming noises in the signal. I've tried different power outlets and stuff, and I can't do anything but unplug the magsafe to get rid of the problem.
Is there any one else out there with this problem, that you can't use an external display (or your USB ports) with the lid closed without Magsafe adapter?Well the official document, posted by CT, on clamshell mode doesn't support your theory that it worked with your older/pervious macbook pro and it certainly doesn't work like that with your newer mac.
So you are either mistaken or your older/pervious mac was broken in some way to allow it to work without a AC adapter connected.
henkeblomqvist wrote:
No it hasn't. My previous MacBook Pro handled that just fine.
And I do have trackpad and keyboard connected, both via bluetooth. -
Can I use External Display on a Window 7 64bit 13" Macbook Pro Early 2010
I have a 23" LED LG Monitor , It has VGA Cable , RCA Cable and HDMI Plug (but no wire). I am asking now if whether I should need a VGA Cable or a RCA Cable or a HDMI cable. I know there's the Apple Mini DVI to VGA Adapter. Should I get that? And does window 7 64bit professional bootcamp support any external display? If not , is there another way to get it working.
You should be able to hook it right up just like if it was a "normal" Windows Laptop.
Windows would be the one to set it up with. Make sure you've updated Boot Camp.
You probably should use an "Apple Mini Display" port -to- HDMI adapter as that should give you more display options, etc. (I'm not sure how high the 13" can go on resolutions, HDMI or VGA may not matter?)
You MAY have to use a separate sound cable between the laptop and monitor as some HDMI -to- (whatever) adapters don't carry the sound signal via an "adapter".
The next choice would be a Mini Display port to VGA adapter.
You may want to also ask this question in the "Computing Hardware/MacBook Pro" area as they may have more info?
Hope this helps... -
I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
Here is an image of the issue
http://www.flickr.com/photos/67839707@N08/8884847081/I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed. -
Iphone 6 screen broken can the store retrieve pictures
iphone 6 screen broken can the store retrieve pictures
If I bring my phone to the apple store can they retrieve my pictures for me.Sorry, but if your screen is looked by a password and TouchID is not activated, you can't transfer the photos to a different computer, without using the touch screen.
Did you try to transfer them to your computer?
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support -
Broken LCD - Can not get external Display
My screen is no longer good so im trying to connect a external display.
Been trying for hours trying to get the external display to work of boot.
Ive tryed everything changing 2 sets of hd cables and svga cables. The funcion key.
The Laptop does reconize the display but seems to go into powersave mode or something.
The only way i can get the external display to work is if i pull the battery and wait a bit then power
up the display will work with a notice on the screen that cmos will be reset to defaults then restarts
and back to where i was again... Im thinking it something in the bios thats causing this.
Thank you and hope i can figure this out.
Pavillion dm4-1160us
This question was solved.
View Solution.HI Ezfilez,
I understand you are having an issue with the external display on your Windows 7 computer.
Sometimes it is in the BIOS. If you follow the link and update it should help resolve your issue.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07110
Please let me know if you require further assistance.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Can you use external hard drives with the HP Omni 10 5600US
Since this a Windows tablet, can you use external hard drives with the HP Omni 10 5600US?
I know there is a micro-sd reader for additional storage but can you use the usb for external hard drives like a regular pc?
I tried looking at the spec's for this tablet and it said the usb port was host only. I'm not sure what that means exactly.Yes you can. You'll need to purchase a USB OTG (on-the-go) cable. I recommend using a drive that has its own power supply but I've successfully used small USB powered drives also.
-
I don't have an older version of Ibooks on my computer, can I use my friends, to restore the old book shelf version on my iPad? Will that work?
It won't change the version you now have.
-
can i use apple tv to mirror my windows computer screen?, can i use apple tv to mirror my windows computer screen?
You can try AirParrot.
-
I triued installing the itunes update on my iphone & now it has the USB connector icon on the screen & I can't use my phone. Help?
Can you please explain what happend and tell us exactly what you were doing before the mishap occured? Your ambigous post will not help us help you.
-
I just want to use the phone as a web browser using wireless, I don't have verizon, I can't get past the set-up screen. Can I use the phone without a verizon account?
I took it to Verizon and a counter person got it to work. she said one has to be persistent and eventually the screen goes away that was demanding the phone number I didn't have, it works now I'm happy
-
Can we use external drive with ipad air
can we use external drive with ipad air?
There are some wifi-enabled drives that allow you to stream content (music, films, tv programmes) to an iPad, but you can't directly connect one to an iPad.
-
Can I use external speakers with the iPad when using Facetime?
Can I use external speakers with the iPad when using Facetime? How do I do that?
They have to be either plugged in via headphone jack or the dock port at the bottom. If you can. I've used it on apple tv, but that's it. I don't know if the others work, but I don't see why not. Try plugging in speakers in the headphone jack. You will get an answer :)
-
Can I use the display from the iphone or rotate so that I can use the tv in portrait orientation with a app or appleTV? or rotate the display of the tv?
The landscape and portrait mode when AirPlaying your iPhone to the Apple TV will depend on the app you are in on the iPhone.
For example, the home screen on your iPhone is in portrait mode even if you rotate the phone, so if you are AirPlay mirroring this, it will show in portrait mode on the TV. If you have photos taken in landscape mode and rotate your phone or watch a video in landscape mode, then the video should appear in landscape mode on the TV.
If things that should be in landscape mode are not in landscape mode, you might have the orientation lock turned on. You can turn it off or on using the steps in this link: http://www.cultofmac.com/142535/how-to-enable-orientation-lock-on-your-ios-devic es-ios-tip/
I hope this helps! -
S430 - deactive nvidia GPU and still use external displays?
Hi,
I'm interessted in buying an Edge S430. Is it possible to deactive the dedicated nvidia gpu in the bios?
Furthermore, is the intel GPU cabable of using external displays?
Thank you.
Best,
harnzS430 with Nvidia discrete gpu can be disabled in the BIOS by selecting the integrated GPU option.
I think the DP still work, but not sure whether the Thinkpad HDMI do too.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft
Maybe you are looking for
-
Itunes files won't show up in the menu
to import music into a movie, i found out that the dropdown menu only shows me as available, the preinstalled Apple audio effects and short audio files in iMovie. How do i make other forlders and itunes files available to imovie? imovie 11 mac osx 10
-
GB 1.0 & 1.1 quitting immediately...a simple solution!
I realize this is not a "new" topic, but it has plagued me for several years and I finally found the cure. I did a search on this very problem (on the Apple site under Support>Garageband 1.0/1.1>+"GB quits after a brief flicker of the "Finder"+) and
-
I started a book with 100 pages, but reduced it to 75 by deleting some pages. When i completed the book & tried to buy it a box pops up saying I have some frames that need photos. I've checked the book over & over & cannot find any pages like that. H
-
8004fd22 error message, unable to sync calendar
everytime i try to sync my calendar between e71, ovi suite and outlook 2010, i get error code 8004fd22 and it says please reconnect via bluetooth or usb and try again. any suggestions is this a known error? ive tried unstalling everything, turning of
-
Hi all, I have created two infosets and was wondering if i can execute both of them in one query (ONE REPORT)? Thanks