IBook G4 "slowed" SIGNIFICANTLY afte installing OSX 10.4.8 and then 10.4.9
Hi,
My iBook G4 slowed SIGNIFICANTLY after installing OSX 10.4.8 and then 10.4.9 and freezes often too!!!
I mean, it takes a few minuets to boot-up sometimes.... I hate that spinning wheel!
It ran great before the two up-dates, and I have done all the "verify and repair" that can possibly be done with and without the original installation DVD.
Basically, can I revert to 10.4.7???
Or, is there a simple solution?
First let's take a step back and have a look at your upgrade procedures. Here is one suggestion of how to proceed:
Mac OS X 10.4.9: Update procedure recommendation
First, make a full backup of your current Mac OS X installation -- preferably a clone ( try SuperDuper! or Carbon Copy Cloner). If something goes wrong, or you experience a major incompatibility after updating, the backup will prove invaluable.
Next, if you are the cautious type, run a disk repair on the volume targeted for installation. You can use an n alternative startup drive or your Mac OS X installation disc. If you are starting up from your Mac OS X install disc, put the disc in your optical drive and restart holding down the "C" key. After your system starts up and you've selected your language, go to the "Utilties" menu and select "Disk Utility." Use the "Repair Disk" function. After disk repairs are complete, restart from your normal startup drive and continue.
Avoid performing any other operations (in Mac OS X or third-party applications) while the update process is occurring. Performing other tasks during the update process potentiates various issues, including problems with prebinding (which is happening during the "Optimizing the system" phase of the update process) and others that can occur when files are being replaced by the update are also being read/written by the currently logged in user. You should not only refrain from launching applications or working with files during the update process, but also from putting the system to sleep, disconnecting/connecting devices, and other potentially interruptive actions.
In addition, before installing the update, make sure all Apple-installed applications and utilities are in their original locations. Moving one of these applications to a different location on your hard drive can lead to an incomplete update. Also, disconnect any FireWire/USB devices before applying Mac OS X 10.4.9 (except for your startup drive, if it is FireWire or USB, and your keyboard/mouse), then re-connect the devices one by one (checking for issues created by any particular device) after the update process is complete and the system has restarted. Also, note that the first restart after applying Mac OS X 10.4.9 may be abnormally long. Subsequent restarts should take place at normal speed.
Similar Messages
-
IBook G4 slowed SIGNIFICANTLY & FREEZES with OSX 10.4.8 and then 10.4.9 too
Hi,
My iBook G4 slowed SIGNIFICANTLY after installing OSX 10.4.8 and then 10.4.9 and freezes often too!!!
I mean, it takes a few minuets to boot-up sometimes.... I hate that spinning wheel!
It ran great before the two up-dates, and I have done all the "verify and repair" that can possibly be done with and without the original installation DVD, including disk repair.
I had no other programs running at the installation, nor were there USB or Firewire attached. But I was plugged into the local network (how else was I supposed to download the upgrade).
Basically, can I revert to 10.4.7???
Or, is there a simple solution?Hi Thanks for the help,
S.M.A.R.T. Status: Verified, is appearing just like
that.
OK, that's a good sign, though it doesn't necessarily mean that everything is okay with the drive, just that nothing is currently far enough out of spec to get flagged.
I looked in the console (I dont even know what it is)
and the only things I could find that looked dodgey
were lines such as those below...
Apr 12 10:19:11 localhost launchd: Server 3d2b in
bootstrap 1103 uid 0: "/usr/sbin/lookupd"[41]: exited
abnormally: Hangup
Apr 12 10:19:18 james-rk-modzelewskis-ibook-g4
launchd: Server 0 in bootstrap 1103 uid 0:
"/usr/sbin/lookupd"[55]: exited abnormally: Hangup
Apr 18 11:14:20 james-rk-modzelewskis-ibook-g4
launchd: Server 0 in bootstrap 1103 uid 0:
"/usr/sbin/lookupd"[55]: exited abnormally: Hangup
These occur a few dozen times throughout the system
log. Does it mean anything to you???
Those are harmless, I think. I've seen them on my laptop, I think around when I switch the network from ethernet to AirPort or vice versa. And maybe when I put the computer to sleep, too.
One thing you should try to do is see if you can figure out a pattern to the stalls and freezes. Do they only happen when you're on the Internet? Maybe just with one particular web site or page? Also, try running Activity Monitor and keep an eye on it to see if you can catch the name of a process that's taking too much processor time.
How much RAM does your computer have, and how much free space on your hard drive? That can make a difference, too. You should have a few GB (I like to keep at least 8GB free on my PowerBook) of free hard drive space. 512 MB of RAM is pretty much the minimum for Tiger, I think. Less than that and you'll find the computer will be using swap space on the hard drive quite a bit if you try to do anything but the bare minimum of simple web pages and email.
charlie -
I had a 'dead' iMac repaired and it needed a new HDD and graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I have no idea what this will be. can anybody help please?
<Personal Information Edited by Host>On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R -
I have a late 2009 iMac. I installed OSX 10.8.4 and want to go back to Snow Leopard. I have a 3TB external HD. Are there any issues I need to know about or tips I need to know before doing this? Thanks.
Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the
Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status
of the drive in DU's status area. If it does not say "Verified" then
the drive is failing or has failed and will need replacing. SMART
info will not be reported on external drives. Otherwise, click on
the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
from the drop down menu to one. Set the format type to Mac OS
Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on
the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files. -
Recently installed OSX 10.8.2 and found that there was NO ~/Library and when I tried to create one I was told that it already exists.
Does anyone know why ?It's hidden. Choose Go to Folder from the Finder's Go menu and supply that path to access it.
(71284) -
I can not create an Installer on LabView, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...
Solved!
Go to Solution.Hi Shada this can happen if you are including additional installers to your installer for example DAQmx. When you are doing this the installer has to include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder it updated MAX, so when your installer is trying to Include MAX, its asking for the source where it was installed in your computer in this case Vision Builder.
Here you can cache the information so its not asked again, or you can download a newer version fo DAQmx, so it will update MAX and change de dependecy.
You can find more details about this issue in this KB:
KnowledgeBase 3S88PJMY: Why Do I Get A "Missing Distribution" Error When Trying to Build an Installe...
And for keeping a copy here is more info:
How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD -
Installing Leopard 10.5.1 and then updating OS
I have a new Macbook Pro and I need to install Leopard 10.5.1 for software compatibility reasons. I tried doing an install of Leopard 10.5.1 last night but it appeared not to work. Can I install Leopard 10.5.1 and then do the updates on my Macbook Pro? If so, what are the steps that I was missing the first time around?
ThanksOk, you got me there. Missed that change. There are limitations, however. Here is the Apple KB article about it --> http://support.apple.com/kb/HT1948
Note the warnings at the top of the article:
Intel-based Macs support starting from an external USB storage device's volume that:
* Has been formated with a GUID partition type
* Contains an installation of Mac OS X 10.4.5 or later, or Mac OS X 10.5 or later, which is compatible with (or shipped with) the Mac that the USB device is connected to. Note: You should not use a version of Mac OS X that is earlier ("older") than the version your Mac shipped with. -
I installed OSX 10.9.4 and now Finder and Photoshop don't work; how can I fix this?
Now that I have installed OSX 10.9.4 I can't get the Finder to work, or Photoshop. How can I fix this?
In what way does the Finder not work? Any error message?
-
How to install OSX on 2nd HD and get rid of 1st HD?
(thanks to this forum) I managed to install a second HD on my MacPro (I have to specify that I'm degree below z-e-r-o in hardware...).
now, my second HD appears on the desktop (it's set for 1 partition in D.U.)
AND THE BIG QUESTION IS:
HOW CAN I INSTALL OSX ON THIS NEW DISK AND GET RID (once it's done) OF THE OLD CRAPPY SEAGATE HD?
I know that it can be 'cloned' (I've read about for that here on the forum) but, is this the best thing to do? or shall I restart from the original APPLE CD? but how to do that...?
thanks!Why is your Seagate "crappy?" Is it not behaving well in some manner? Because if you were to clone, the exact software issues that it has would appear on the clone. If you simply erase and install on the second empty hard drive, none of the other hard drive's software issues would be present. However, I would make sure your data is backed up before installing anything, and attempt to isolate whatever issues you are having first. If there is nothing on the second hard drive, you can go ahead and install and find out if you have the same issues on that drive. Erase and install is one of the installation options from the installation disks included with your Mac Pro. Be careful not to erase and install your original hard drive unless you are totally backed up as my FAQ explains:
http://www.macmaps.com/backup.html
P.S. in case you didn't realize it, on the internet using ALL UPPERCASE means you are attempting to shout and be rude. Please avoid it so people don't misunderstand you. -
please help need to find out how to get pics off muy ipod into an empty iphoto library....recently re-installed osx...didnt think I had to backp pics if I had them in my ipod...boy was I wrong
There are several third-party utilities that will let you transfer from the iPod to the computer such as
Pod To Mac
Phone Disk
DeTune
And there are others. Also, you will find a user manual for your iDevice at support.apple.com/manuals/. -
IBook G4 slowing down -- Archive & Install question
Hello,
I have an iBook G4, that I bought I believe back in late 2004. It's been slowing down quite a bit and I'm thinking about performing an Archive & Install, which a guy at the Genius Bar recommended would make my performance much quicker and less spinning beachballs.
I have an Airport, through which I access my internet wirelessly, and printer wirelessly. After performing an Archive & Install, will I need to re-setup my wireless internet and ability to print wirelessly? It's been a long time since I set these up the first time, and kind of dread relearning the process.
Thanks,
BenYou could try booting into Safe Mode. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
You will see your normal desktop. Once completely started up in Safe Mode, restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
See if a little hard drive maintenance helps things out.
(In the future, you may want to post in the iBook G4 Forum. You have posted in the iBook G3 (Dual USB) Forum.) -
Installed OSX 10.4.3 And Lost Internet Connection ! Help Please.
I have posted this in the Tiger forum but know there is a lot of general expertise amongst FCE users (grovel, grovel!) and I only upgraded to Tiger so that I can get FCE 3.5 for this computer!
I have updated from 10.3.9 (Panther) to 10.4.3 (Tiger) on my eMac.
Everything appears OK except I cannot connect to the internet.
On finishing the installation I got an error message saying "Could not load login file".
Incidentally, during the installation I disconnected all peripherals including my USB Broadband "modem" (I can't remember the correct terminology).
My "modem" is a "Speedtouch" and in the dock I have an application named "Diagnostics" which has to open to allow the Speedtouch to connect to the internet.
"Diagnostics" will not open.
When I look in my Network configurations the Speedtouch name has a red dot alongside and it is not connected.
If I open Network Port Configurations the Speedtouch name is greyed out and cannot be selected.
Any help would be appreciated.
Ian.
PS. Luckily my iMac internet connection is OK !Nope! I have nothing resembling a stingray or any other aquatic creature!
OSX 10.4.3 was successfully installed thanks to the resolution of the above hiccup and I have now downloaded and installed the OSX 10.4.7 Combo update which brings my OS to "state of the art" status.
I will now be able to install FCE 3.5 - if I can get round to parting with the cash!
Then we'll see what everyone's talking about.
Ian. -
this is what happened when i installed the 10.6.8 update last week (twice!!) Thankfully, I had a time machine back-up, but how can I upgrade to Lion if this update doesn't work?
My iMac
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.20f4
Serial Number (system): xxxxx
Hardware UUID: 00000000-0000-1000-8000-001B639A26E9
< Edited by Host >That's a kernel panic.
Help for Resolving Kernel Panics
Apple - OS X Lion - Sign up to be notified when Lion is available.
Worse case scenario, erase the startup disk and reinstall the Mac OS X. -
Anonymous UUID: AF0434C1-613F-2165-4817-12A2521DF5F6
Sun Dec 8 23:09:12 2013
panic(cpu 1 caller 0xffffff8012cdc19e): Kernel trap at 0xffffff8012c88396, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x00007fbd7b4a0008, CR3: 0x000000006777c000, CR4: 0x0000000000000660
RAX: 0x00ffff8022513ae0, RBX: 0xffffff8018d00350, RCX: 0x0000000000000029, RDX: 0x0000000001447f60
RSP: 0xffffff808c143c30, RBP: 0xffffff808c143cb0, RSI: 0x0000000000000040, RDI: 0x00000000000a23fb
R8: 0x0000000000000029, R9: 0xffffff808c143d90, R10: 0x0000000000000000, R11: 0x0000000000000206
R12: 0xffffff8022513ae0, R13: 0xffffff808c143d90, R14: 0x0000000000000000, R15: 0xffffff8022513ae0
RFL: 0x0000000000010246, RIP: 0xffffff8012c88396, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00007fbd7b4a0008, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff807f9dddf0 : 0xffffff8012c22f69
0xffffff807f9dde70 : 0xffffff8012cdc19e
0xffffff807f9de040 : 0xffffff8012cf3606
0xffffff807f9de060 : 0xffffff8012c88396
0xffffff808c143cb0 : 0xffffff8012c87f5b
0xffffff808c143de0 : 0xffffff8012cadcc6
0xffffff808c143e10 : 0xffffff8012c62179
0xffffff808c143e50 : 0xffffff8012c26bb1
0xffffff808c143e80 : 0xffffff8012c139b5
0xffffff808c143ef0 : 0xffffff8012c1e003
0xffffff808c143f70 : 0xffffff8012cc921d
0xffffff808c143fb0 : 0xffffff8012cf3e26
BSD process name corresponding to current thread: ReportCrash
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000012a00000
Kernel text base: 0xffffff8012c00000
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 522298692346
last loaded kext at 275002117765: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f94fa8000, size 65536)
last unloaded kext at 483162776375: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f94fa8000, size 57344)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.9.1
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.11
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.4.12
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.nvenet 2.0.21
com.apple.driver.AppleUSBOHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.driver.AppleUSBAudio 2.9.3f17
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro5,1, BootROM MBP51.007E.B06, 2 processors, Intel Core 2 Duo, 2.53 GHz, 2 GB, SMC 1.33f8
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x802C, 0x384A53463235363634485A2D314734443120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST1000LM024 HN-M101MBB, 1 TB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:
Please helpThe aftermarket memory you installed doesn't meet the specifications for your model (1066 MHz DDR3 SDRAM.) Reinstall the original memory, or install new memory of the right type.
-
After restoring the disk from a back up, I'm still getting the same error. Why won't it let me erase and re-install??
Are you using the original gray-faced OS X DVDs that came with the system (if so, what OS X level does it say on the disk) or a retail copy of OS X 10.6 or another gray-faced OS X disk from another system? You can't use a gray-faced OS X disk from, for example, an iMac or MacBook Pro, to install on your MacBook.
Was it originally delivered with an OS X level that is greater than what you're trying to install? You can't install an earlier level than what came with the system.
Did you boot to the DVD, and use Disk Utility to create one disk partition, then reboot and try to install?
Maybe you are looking for
-
Where are Thunderbird e-mail files stored on my computer?
I have read the suggested articles and followed the instructions as best I can, but I still cannot figure out how to get to profile (the path revealed in "Troubleshooting Information," by clicking "show folder," was not what I found on my computer---
-
i was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio
-
In email on my IPAD, when typing an address into the to: field, the drop down list which appears has old email addresses. How do I remove them?
-
Where to define remote function module name in RFC adapter
R/2(IDOC) <->XI <-> R/3 (RFC) I can only define remote server information in RFC receiver adpater, but where to define the function module on remote server？
-
Send mail sap office with notification
Hi experts, I send an email in sap office (Business Workplace sbwp). I want send an automatic notification with this email for warning a user How can i do? Thanks in advance.