IBook G4 slowed SIGNIFICANTLY & FREEZES with OSX 10.4.8 and then 10.4.9 too

Hi,
My iBook G4 slowed SIGNIFICANTLY after installing OSX 10.4.8 and then 10.4.9 and freezes often too!!!
I mean, it takes a few minuets to boot-up sometimes.... I hate that spinning wheel!
It ran great before the two up-dates, and I have done all the "verify and repair" that can possibly be done with and without the original installation DVD, including disk repair.
I had no other programs running at the installation, nor were there USB or Firewire attached. But I was plugged into the local network (how else was I supposed to download the upgrade).
Basically, can I revert to 10.4.7???
Or, is there a simple solution?

Hi Thanks for the help,
S.M.A.R.T. Status: Verified, is appearing just like
that.
OK, that's a good sign, though it doesn't necessarily mean that everything is okay with the drive, just that nothing is currently far enough out of spec to get flagged.
I looked in the console (I dont even know what it is)
and the only things I could find that looked dodgey
were lines such as those below...
Apr 12 10:19:11 localhost launchd: Server 3d2b in
bootstrap 1103 uid 0: "/usr/sbin/lookupd"[41]: exited
abnormally: Hangup
Apr 12 10:19:18 james-rk-modzelewskis-ibook-g4
launchd: Server 0 in bootstrap 1103 uid 0:
"/usr/sbin/lookupd"[55]: exited abnormally: Hangup
Apr 18 11:14:20 james-rk-modzelewskis-ibook-g4
launchd: Server 0 in bootstrap 1103 uid 0:
"/usr/sbin/lookupd"[55]: exited abnormally: Hangup
These occur a few dozen times throughout the system
log. Does it mean anything to you???
Those are harmless, I think. I've seen them on my laptop, I think around when I switch the network from ethernet to AirPort or vice versa. And maybe when I put the computer to sleep, too.
One thing you should try to do is see if you can figure out a pattern to the stalls and freezes. Do they only happen when you're on the Internet? Maybe just with one particular web site or page? Also, try running Activity Monitor and keep an eye on it to see if you can catch the name of a process that's taking too much processor time.
How much RAM does your computer have, and how much free space on your hard drive? That can make a difference, too. You should have a few GB (I like to keep at least 8GB free on my PowerBook) of free hard drive space. 512 MB of RAM is pretty much the minimum for Tiger, I think. Less than that and you'll find the computer will be using swap space on the hard drive quite a bit if you try to do anything but the bare minimum of simple web pages and email.
charlie

Similar Messages

  • IBook G4 "slowed" SIGNIFICANTLY afte installing OSX 10.4.8 and then 10.4.9

    Hi,
    My iBook G4 slowed SIGNIFICANTLY after installing OSX 10.4.8 and then 10.4.9 and freezes often too!!!
    I mean, it takes a few minuets to boot-up sometimes.... I hate that spinning wheel!
    It ran great before the two up-dates, and I have done all the "verify and repair" that can possibly be done with and without the original installation DVD.
    Basically, can I revert to 10.4.7???
    Or, is there a simple solution?

    First let's take a step back and have a look at your upgrade procedures. Here is one suggestion of how to proceed:
    Mac OS X 10.4.9: Update procedure recommendation
    First, make a full backup of your current Mac OS X installation -- preferably a clone ( try SuperDuper! or Carbon Copy Cloner). If something goes wrong, or you experience a major incompatibility after updating, the backup will prove invaluable.
    Next, if you are the cautious type, run a disk repair on the volume targeted for installation. You can use an n alternative startup drive or your Mac OS X installation disc. If you are starting up from your Mac OS X install disc, put the disc in your optical drive and restart holding down the "C" key. After your system starts up and you've selected your language, go to the "Utilties" menu and select "Disk Utility." Use the "Repair Disk" function. After disk repairs are complete, restart from your normal startup drive and continue.
    Avoid performing any other operations (in Mac OS X or third-party applications) while the update process is occurring. Performing other tasks during the update process potentiates various issues, including problems with prebinding (which is happening during the "Optimizing the system" phase of the update process) and others that can occur when files are being replaced by the update are also being read/written by the currently logged in user. You should not only refrain from launching applications or working with files during the update process, but also from putting the system to sleep, disconnecting/connecting devices, and other potentially interruptive actions.
    In addition, before installing the update, make sure all Apple-installed applications and utilities are in their original locations. Moving one of these applications to a different location on your hard drive can lead to an incomplete update. Also, disconnect any FireWire/USB devices before applying Mac OS X 10.4.9 (except for your startup drive, if it is FireWire or USB, and your keyboard/mouse), then re-connect the devices one by one (checking for issues created by any particular device) after the update process is complete and the system has restarted. Also, note that the first restart after applying Mac OS X 10.4.9 may be abnormally long. Subsequent restarts should take place at normal speed.

  • I am on a MAC PPC G5 with OSX 10.5.8 and can't get the Leopard disk to stay in the drive, although " Woodstock - The Director's Cut plays fine " HELP !!

    I am on a MAC PPC G5 with OSX 10.5.8 and can't get the Leopard disk to stay in the drive, although " Woodstock - The Director's Cut " plays fine, HELP !!

    Yes it is the right Disc...
    2Z691-6040-A  (OEM) Drop-in DVD...
    System Requirements 
Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor. User must already have 10.4 or above to install this 10.5 upgrade.
    Compatibility 
eMac (2005), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), iMac (Mid 2006 17-inch), iMac (17-inch Late 2006 CD), iMac (17-inch Late 2006), iMac (20-inch Late 2006), iMac (24-inch Late 2006), iMac (20-inch Mid 2007), iMac (24-inch Mid 2007), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), Mac mini (Late 2006), Mac mini (Mid 2007), Mac Pro, Mac Pro (8-core), MacBook (13-inch), MacBook (13-inch Late 2006), MacBook (13-inch Mid 2007), MacBook (13-inch Late 2007), MacBook (13-inch Early 2008), MacBook Air, MacBook Pro, MacBook Pro (17-inch), MacBook Pro (15-inch Glossy), MacBook Pro (15-inch Core 2 Duo), MacBook Pro (17-inch Core 2 Duo), MacBook Pro (15-inch 2.4/2.2GHz), MacBook Pro (17-inch 2.4GHz), MacBook Pro (Early 2008), Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD), Xserve (Late 2006)
    http://www.welovemacs.com/2z6916040a.html
    I'd try to find another Mac to make a DMG of it & burn a copy to see if that works better.

  • I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto updater it still will not open.  Any suggestions.

    I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto upgrader it still will not open.  Any suggestions.

    Resetting Printing System helps OS X recognize new printers.
    http://support.apple.com/kb/HT1341
    When you add the printer, make sure you use IP > Jetdirect and the correct printer IP address.

  • Is it possible to downland itunes 10.6.3  I  have an old Macbook pro with OSX 10.5.8 and lost my itunes and cannot seem to download a version compatible with the computer

    is it possible to downland itunes 10.6.3  I  have an old Macbook pro with OSX 10.5.8 and lost my itunes and cannot seem to download a version compatible with the computer?

    Click here.
    (69952)

  • I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

    I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

    See below if the search engine setting was changed without your knowledge and you can't change it back.
    You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
    Step 1
    In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
    There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
    This step does not completely inactivate Genieo.
    Step 2
    Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Frameworks/GenieoExtra.framework
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.
    If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
    Move each of these items to the Trash in the same way:
    /Library/LaunchAgents/com.genieo.completer.update.plist
    /Library/LaunchAgents/com.genieo.engine.plist
    /Library/LaunchAgents/com.genieoinnovation.macextension.plist
    /Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
    /Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
    /usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
    /usr/lib/libimckit.dylib
    /usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
    ~/Library/LaunchAgents/com.genieo.completer.update.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
    Step 3
    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
    Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

  • Does anyone else get a Netfix window popping up unexpectedly? I have an iMac with OSX 10.6.8 and Safari browser version 5.1.10.

    Does anyone else get a Netfix window popping up unexpectedly? I have an iMac with OSX 10.6.8 and Safari browser version 5.1.10. It only happens when I go to a specific local news site, and it is only a Netflix window that opens up. I do have a Netflix account.

    Do you have Block Popup Windows checked in Safari/Preferences/Security?
    What web site?

  • MacBook with OSX 10.6.8 and Safari 5.1.10

    I have a MacBook with OSX 10.6.8 and Safari 5.1.1.  My software is up to date, but I receive messages from several sites that my Safari is no longer supported, and I am starting to have problems with my Gmail. Any suggestions?

    You need to upgrade the computer's OS or switch to a product such as Firefox.
    To upgrade, open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
    Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
    (124854)

  • MacBook Pro with OSX 10.8.5 and new Skype Installation

    I have a MacBook Pro with OSX 10.8.5 and would like to install SKYPE now that I have a new granddaughter on the way. I have read all sorts of horror stories about Skype crashing the system with this operating system, etc. I have NOT installed Maverick,but regularly keep all updates installed and up to date. Does anyone know if the problems presented by this OS and Skype have been resolved yet?  If I do choose to install Skype (I assume following instructions on the Skype site) is there anything I should watch for or be wary of?  I also have a new iPad and hope to use SKYPE on it when travelling.

    Goodmorning, Hands4
    I have tried to install SKYPE on my MacBook Pro, by going to Skype and Download for Macs. It downloads OK into the Downloads folder and I can drag it into my applications folder as per instructions from the Skype site. HOWEVER, when I double click to open it and to sign in, I get a message " Skype cannot be opened because it is from an unidentified developerYour security preferences allow installation of only apps from the Mac App Store and identified developers."   When I push the help button, I see that one has an option to override the security and allow installation. I am nervous to do that as I don't want any viruses, etc.  I have tried to go to the MacApp Store, but can only find apps for iPad and iPhone. Can't seem to see any for my laptop.
    Thanks again for your assistance.

  • I have a MacPro with OSX 10.9.4 and I photo 9.5.  When opening IPhoto I got a message I needed to upgrade my IPhoto with an upgrade installer.  Now IPhoto is just spinning and will not let me quit or Upgrade.

    I have a MacPro with OSX 10.9.4 and I photo 9.5.  When opening IPhoto I got a message I needed to upgrade my IPhoto with an upgrade installer.  Now IPhoto is just spinning and will not let me quit or Upgrade.

    BAckup your iPhoto library, depress and hold the option and command keys while launching iPhoto until the first aid window comes up and repair permissions and if necessary rebuild your database
    LN

  • Work with OSX 10.8.3 and can install elements anymore serial noth good

    work with OSX 10.8.3 and can install elements anymore serial noth good

    sorry Barbara i have no experience with this, no i think my version of elements needs a new activation
    Op 3-apr.-2013, om 18:06 heeft "Barbara B." <[email protected]> het volgende geschreven:
    Re: work with OSX 10.8.3 and can install elements anymore serial noth good
    created by Barbara B. in Photoshop Elements - View the full discussion
    What do you mean by "serial noth good"? Is PSE rejecting your serial number or telling you that you have too many activations or giving you the "licensing has stopped working" message?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5203018#5203018
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5203018#5203018
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5203018#5203018. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I want to return my iPad 3, but I did not have an apple account at the time of purchase, and when I type in my order number and proceed to click "cancel order", it prompts me to log in with my apple I'd and then tells me that the account is not authorised

    I want to return my iPad 3, but I did not have an apple account at the time of purchase, and when I type in my order number and proceed to click "cancel order", it prompts me to log in with my apple I'd and then tells me that I am not authorised to do anything on the account in relation to the transaction. What should I do?

    You can view and edit your orders without an Apple ID by logging in with your order number, along with the shipping zip code or email address.
    I copied the text posted above from this website.
    http://store.apple.com/us/help/viewing_changing_orders
    Click or tap on the Order Status link here and you should be able to type in the order number and your zip code.
    To view or edit your Apple Online Store order, visit online Order Status and log in with your Apple ID and password.

  • How to get rid of the blue underline with green arrows on words and then a pop-up ad appears.

    How to get rid of the blue underline with green arrows on words and then a pop-up ad appears.

    Click here and follow the instructions, or if they don't cover the type of adware on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
    (119795)

  • When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7

    When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7 and iPhone 5.

    http://support.apple.com/kb/HT1808
    Try this step and if you cannot get your device into recovery mode there is a chance you have a hardware failure and you need to call apple to see what service options you have.

  • I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

    I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

    Priscilla,
    if your Mac is still in warranty, then you should contact the Argentinian technical support service. If it is out of warranty, then we can try to lend a hand. (We’re just fellow Apple product users here.)

Maybe you are looking for

  • Find and Replace text in files

    Is there a function that will find and replace a word in a few text files at once. E.G replace the word database1 with database2 without going into each script individually and doing and search and replace.

  • Acrobat 4.0 & Windows XP

    When Running 4.0 on Windows XP to create a PDF doc from Word file, the transforming, PDF maker/distilling, and printing routines seem to run successfully (as indicated by application itself)and finally a "process succeeded" notation appears - BUT the

  • Problem for Accessing the Table BDCP..CDPOS..CDHDR..

    Hi Guys, i have the problem of accessing the BDCP table.it is working fine in development and testing server.it is taking more time in background in Production server..can anyone help me to optimize this code and please suggest me if i can change any

  • ShowModalDialog - Urgernt Help !!!

    Hi, I have a page with a button called "showList". When i click on this button, i need to show a pop up window. The dialog window is meant to show a search result table with two columns "name" and "description". The search result could contain say 10

  • Unwanted text outline colour in highlighted button state

    Hi DVDSP geniuses and much thanks in advance! I'm getting unwanted colour at the edges of text in buttons in selected and activated states. I'm using a non-layered menu and a greyscale jpeg for background, a greyscale jpeg for overlay with simple col