Ibook g4 stops on tha apple logo when i turn it on
my ibook g4 stops on the apple logo when i turn it on
Hi, and welcome to Apple Support Communities.
It sounds as if it could be having hard drive problems. Have you tried starting up in Safe Mode? If not, I suggest that you give it a try. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
If this works you will see your normal desktop. Once completely started up in Safe Mode, try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
See if you are able to do a little hard drive maintenance to help things out.
Similar Messages
-
My ipod touch is not connecting to itunes and wont turn on all i get is the apple logo when i turn it on.
How do I fix this?
can anyone help?Start her:
iOS: Not responding or does not turn on -
Can someone please help with my issue listed - My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo. Tried reset option/troubleshoot several times. Also wont show up on computer at all when I plug in to USB.
Any tips are very much appreciated.Place the iPod Touch into DFU mode. This will be similar to what the factory would do to install the iOS onto new iOS devices.
Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
To place your iOS device into DFU mode.
First connect you iOS device to you computer.
Open iTunes if not already open
Now turn off your iOS device using the power swipe.
Press the home and sleep button on your iOS device for 10 seconds.
Release the sleep button but carry on holding down the home button. For another 10 seconds.
Your iOS device should now be on DFU. Click on restore and iTunes will download the latest iOS for your device.
Hopefully that sorts it if not, you will have to go to a service centre or call Apple Care up and get them to collect it and repair it. (replace it) Or go into an Apple Store. -
Mbpr won't boot up, stuck on white screen with apple logo when I turn it on
This morning I noticed the apple logo on the outer shell of my mac was lit up, I thought this was very odd because the lid was closed and like all laptops when thier lids are shut the display ect. are supposed to switch off/go to standby?
Anyway I quickly opened the lid of my laptop to find that iconic white boot up screen with the grey apple logo and the small spinning loading circle under it
I've waited nearly 5 hours and tried multiple thing like booting up in safe mode, single user mode, and evan reinstalling OS X mavericks somebody help me pleaseRead this article... It recommended something you did already but there are other troubleshooting tips I'm not sure you've tried.
http://support.apple.com/kb/TS2570
If none works, then a trip to the Apple Store is needed. It's most likely a hardware issue that you yourself cannot resolve. -
so when i turn of my ipod its always stuck on the apple logo.Ive tried disk mode and it still doesnt work.Also it isnt reconized on itunes so i need help badly
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
My ipod is stuck on the apple logo when you turn it on, how do i fix it
my ipod is froze on the apple logo that appears when you turn it on, after a while it turns off, but i can get passed this logo, could someone please help me to fix my iPod !
Try here:
iOS: Not responding or does not turn on -
Help pls, how to fix my ibook it hang up on the apple logo when i open
help pls, how to fix my ibook it hang up on the apple logo when i open
it didnt start up in safe mode since id follow the instruction on your link..
i dont have my Mac OSX DVD installer. where can i have that cd?? my bro just give me this ibook without insteller and we cant find it at all. Some says the problem is about the hard disk of it but nobody can that kind of hardisk here in the philippines.. thank for your concern.. and pls pls help me.. if you want you can add me up on FAcebook so that we can discuss about that matter.. Thanks a lot. -
MY iPhone 5C suddenly stopped working. It wont connect to my Mac and repeatedly reboots from the apple Logo when plugged into the wall.
There is no water damage or anything. I got that checked at the Apple store. I also have Apple Care + but didnt let them give me a new one yet because I have photos on this that I have no yet backed up that are very important. They are the last photos I have with my grandfather. Can anyone help me. Please!If the phone shows the "connect to iTunes" screen, the data on the phone is most likely lost.
Connecting in recovery mode is your only chance to use the phone again, besides getting it serviced by Apple.
iOS: Unable to update or restore -
AppleTV 3 only showing Apple logo when connected to very new Panasonic plasma - worked Ok with older Panasonic (2007) - have reset AppleTV, tried 3 HDMI cables.
Tried again as you suggested - no luck. Ref sequence below
A. Pressed menu & down to reset Apple TV
B after reset & restart pressed menu & up buttons to change resolution. After pressing both buttons for 6 sec, LED starts flashing - released both buttons. TV screen blank. After 20 to 30 sec horizontal lines came on screen remained for 20 sec then screen again went blank. Waited for couple minutes. LED still flashing - pressed Menu button for 2/3 sec - flashing stopped & LED glows continuously. Screen blank
C. Reset the unit again by pressing menu & down. When it restarted - while LED was still flashing, got orange color screen with Apple logo in the middle. This screen remained till LED stopped flashing & then screen went blank -
I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank youIf you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
I installed Windows 7 with Bootcamp on a new iMac 21inch with Lion. Everything went well. While running win7 I installed some software like Daemon Tools and Fear 3. It runs perfectly. When I reboot into Lion (throught Bootcamp) the computer stops at the Apple logo. It stays there for hours. I checked and restored the Macintosh HD but it keeps hanging. After restoring a backup with timemachine everthing works fine and the computer boots into Lion. Rebooting in Windows is working, but again when I reboot into Lion it stops at the Apple logo. Anyone can help me fix this ?
Greetz
DimiI have trouble understanding
When or how ?
When you SET LION to be the default startup disk / OS from Windows Taskbar? from Windows control panel "Boot Camp" where you can also set the default?
If you have any external drives, disconnect them, and anything else.
If you set Lion to be the default in Lion System Preferences control panel "startup disk" - then boot into Windows using Alt or Control panel, then let it restart itself and go into Mac OS X.
Normally trouble booting Mac OS is due to a check disk going on, dirty file system journal directory or from forced hard restarts.
Boot into Recovery Partition Mode and check your partitions and repair. Command R
There are details though that are probably missing. -
My iPod says "cannot be synced. The required file cannot be found" it also defaults to apple logo when I try to access photos. I think the issues are linked. Any ides?
So you have tried removing/trashing your iPod's photo cache? See here for more information on where to find this file.
iTunes: Understanding the iPod Photo Cache folder
B-rock -
i have recently recieved an ipod nano 6th gen after the 1st gen recall, and out of nowhere it just started flashing the apple logo when connected to computer. Help please!
Universal Serial Bus controllers
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel(R) ICH9 Family USB Universal Host Controller - 2935
Intel(R) ICH9 Family USB Universal Host Controller - 2936
Intel(R) ICH9 Family USB Universal Host Controller - 2937
Intel(R) ICH9 Family USB Universal Host Controller - 2938
Intel(R) ICH9 Family USB Universal Host Controller - 2939
Intel(R) ICH9 Family USB Universal Host Controller - 293A
Intel(R) ICH9 Family USB Universal Host Controller - 293C
USB Composite Device
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer. -
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom
Maybe you are looking for
-
Collections of Fonts in Mail...
Hi All; I'm trying to organize some of the collections... I can't seem to get a font to show up in recently used, no matter where or how I'm using fonts. I notice when I go to TEXTEDIT and use a font and save it, it automatically puts it into my favo
-
How to change the vendor code of site in SAP IS retail
Dear All, In SAP IS Retail, At the time of site creation. we create Site Customer & Site Vendor with site creation. For example If Site code is "1228" then the Customer Code of site will be "C1228" & Vendor Code for site will be "V1228". If by mistak
-
Announcement: New Wireless Client Available
A new build (# 2004.2.24.130) of the Wireless Client is now available for download from OTN: http://otn.oracle.com/tech/wireless/mobilebrowser.htm This build addresses issues with the previous build which preventing .xad and .xforms files from being
-
I have downloaded the data from icloud after reset but I can not transfer all the apps. I can see all apps in icloud back up option. Can you pl. help me to get all my apps from icloud backup?
-
Have problems getting Bluetooth to recognize voice commands. When I press the answer button on Bluetooth I get a "connected" message, not voice command options. Has anyone had this same problem? Thanks