Ibook G4 too slow
I have an ibook G4, 1.33 GHz, 256 MB. When it started slowing down I bought an external drive to which I moved all photos and itunes library. It doesn't seem to have helped at all. It's got to a point where a simple one-page word document takes over 5 minutes to save! What can I do?!
I am not a tecchie, so any advice in the most layman's terms will be most appreciated. Thanks!
Hi mean,
Hope by now you've followed the links and gotten an insight to what might be causing the problem. My iBook has 512 MB and saving is still so slow or sometime just clicking on links takes forever.
My husband always says that this problem occurs when you've go too many programs open. So, I close ALL but the one I'm working in; STILL PERSISTS. If you're able to find a solution to this (short of buying a new computer with more processing speed and memory) I'M ALL EARS! Please let me know, as I'm sick and tired of seeing that multi-colored ball circle and circle!
Annie
iBook G4 Mac OS X (10.4.9)
iBook G4 Mac OS X (10.4.9)
Similar Messages
-
'disk too slow' problems when trying to record ONE TRACK on my ibook.
okay- help guys. my new ibook freezes after not even a minute of one track live recording and i ge the disk too slow error. i'm using a basic m-audio usb interface with the internal (4200 rpm) hard drive. i know this isn't a fast hard drive, but SURELY. one track? i've been in touch with m audio, reinstalled driver, repaired hard disk permissions. still no good. i only ever need to record two live tracks at a time, but then i do need to stack them up a bit. is my ibook really incapable of that? i'm shocked if it is. anyone want to buy an ibook?
any advice much appreciated as i'm going out of my mind.
happy christmas,
adam gilhespyAdam:
You haven't given a lot of info, but here are a couple of ideas:
1) What sample rate are you using? You should be at 44.1 or 48 kHz. Don't even think of anything higher.
2) Are you recording in a new arrange window? Or are you overdubbing to existing tracks? If so, freeze all your existing tracks.
3) Are you attempting to use any plugins while you're recording? If you are, turn them off for now.
4) How much RAM do you have installed? You need at least 768 MB; more preferably.
5) You're going to need an external drive eventually, but to record one track should be easily done. -
Error message: "Disk is too slow or System Overload."
When I try to record from the line-in on my MacBook Pro (2.16GHz, 2GB RAM, 100GB 7200rpm HD), I get after some time (that can range from a few seconds to a few minutes) the error message: "CoreAudio: Disk is too slow or System Overeload. (-10010)".
This is weird because I get that error even when recording into an empty project. I have no such error on my old PowerBook G4 (867MHz, 512MB RAM) with the same version of Logic Express (most recent). Both computers are fully up-to-date.
I also get that error on my MacBook Pro very often when I'm working on a project and it's getting pretty annoying, it sorts of halts the process each time...
I also have Mail, iCal and Adium running at the same time as Logic Express, none of which use much CPU so the problem can't realistically be from them...
Any help to resolve this issue or at least shed some light on the potential cause would be greatly appreciated!Simply having idle applications in the background is probably fine, but I certainly believe that something like Mail checking for new messages in the middle of recording in Logic could cause problems.
I would also check Activity Monitor to see if you have any background processes running that you aren't aware of. My wife's iBook slowed to a crawl once, and I discovered that a printer driver she installed to use a printer at work was using about 80 percent of the CPU.
-Eric -
DISK TOO SLOW on a POWERBOOK G4!
Hi can someone pleeeeaasse help me quick!!! I have just spend loadsa dosh buying a midi keyboard, mic and a fast track audio device for my powerbook! I have 34gb free on the hard drive, 256mb of memory, and a 1.33ghz powerPC G4 processor. The operating system is mac OS X 10.3.9! However, when i try to record guitar (and this is the first track in so who knows when i'm on the 10th what would happen) it just says 'disk too slow' about a minute to a minute and a half into the recording! I've read the solutions saying buying a external hard-drive is the way to go - but i can't afford to buy one if it won't help. Basically I want to be able to record quite a few tracks comfortably can you tell me what i need to buy (ie firewire harddrive) or what i need to do (ie install garage bands 2) to increase my performance and stop these problems.Thanks!!!!
You should not be seeing "Too Slow" errors with a single track, even my stock 800Mc iBook with only 256MB of RAM could record 8-9 tracks on the internal drive.
You're going to need to see what else might be causing that.
Other Apps running? Checked Activity Monitor to see if anything is hogging resources?
Have you tried logging out and back in, launching only GB? Logged in as another user?
--HangTime [Will COmpute for Food] %-|> -
No Reason For Disk Too Slow Error, any ideas?
Ok,
So I've used Garageband for years from iLife 06 and up and I've never had an issue with any Garageband until now. Here's the deal, I still get the disk too slow error, and there is no explanation. Below is my computer config:
COMP I'M USING:
Macbook Pro 13 inch
OS X Mavericks
Intel Core 2 Duo (1st unibody)
4 GB of RAM MAX
BRAND NEW Hybrid 7200 RPM Drive Installed 500GB total, 300 GB FREE
NO Other programs are open.
I use Garageband for recording songs but mostly now for recording podcasts. So the track I am using is normally 1 hour in duration. I can't seem to skip around, from minute 1 to minute 54 and edit at my whim without beach ball and timeing out getting the disk to slow error I never had this issue before, I either get the disk to slow error when trying to navigate large gaps of time in the podcast as I said earlier or even during RECORDING a podcast it'll simply say disk to slow, stop recording and occassionally say there are too many tracks in use, when I only record using 1 track of audio.
How can this be possible? Even my old G4 allowed me to jump all over the timeline with no issues. It seems there is some kind of flaw in the software. And yes, I just restored OSX Mavericks to my brand new Hybrid Hard drive, so there's no explanation as there are no disk errors or permissions errors of any kind.
I'd rather not hookup an external drive to record too as that seems silly when I've never had too before. If this "modern" computer can't do something that my old G4 ibook can do, don't you think we're going in the wrong direction with this program?
I've heard of so many people having this issue, and I thought upgrading my OS and getting a new HD would help but it hasn't. I'm at wits end with this issue.
Any advice would be helpful, thank you.There are a few other reports of problems with 10.6.7
Some audio device(s) inputs have ceased working, a few disk to slow messages...etc. I don't see the wisdom of upgrading a working DAW system if that's it main function. OSX has to support a lot of different hardware now, many, many Intel motherboard and/or processor revisions... it's not going to be as smooth sailing as it used to be.
pancenter-
Here's a search over the past 90 days.
http://discussions.apple.com/search.jspa?threadID=&q=Disktoslow&objID=c231&dateRange=last90days&userID=&numResults=15&rankBy=10001 -
Oi vay! a mac thats too slow to use DVDs, quicktime, imovi,
OI VAY!!I believe I was sold a mac, by a mac expert nonetheless, that is far too slow and lacking in memory to watch videos in any form, dvd, file, with quicktime, etc.
And it seems too old for the updates available.
its a iBook G4
version 10.4.11
processor: 800 mhz (slow!)
memory: 640 mhz (low!)
Can anyone pls confirm or tell me otherwise please!?
thank u all or any replies most appreciated!
m in berlinThe computer should be able to play DVDs, if it has the correct Combo optical drive,
(and not a CD-RW basic drive) and the RAM can be increased to 1.12GB by adding
a chip under the keyboard in the upgrade slot there.
All in that series should have been able to play DVD media and record/play CD media.
You can find more specifications about portable Mac and others by getting the
Mactracker download from http://mactracker.ca and note the iBook (G4) info.
According to this ^ database (free download) the RAM max is over 1024MB.
Early iBook G4 tech specs: http://support.apple.com/kb/SP89
The software updates for Tiger 10.4.11 should appear when you run Software Update
from the menu which appears when you click on the Blue Apple in left side menubar.
You could also get the items which appear in there, direct as stand-alone installers
from Apple Support downloads online (good for later re-installs, if necessary, if saved.)
Not sure what the problem really is, in regard to the computer. There is a DVD Player
which should launch automatically on insertion of DVD media; in System Preferences
you can choose how media discs are handled in the appropriate Preference panel.
Note, you may have to buy an iLife version suitable for the computer you have, and
due to technical differences in the older 800MHz iBook G4 vs some latest models,
the iLife 09 may have specifications unsupported in the hardware of that computer.
iLife 06 is better suited for older G4 Macs, and that is a retail installer disc. You may
be able to get one in the second-hand market. Tiger 10.4 retail disc itself does not
contain an iLife version, as that was a separate disc. Computers that shipped with
Tiger 10.4.x included extra software and they had an iLife version, plus AppleWorks.
You can see a DVD without iLife installed, DVD Player should be in Applications folder.
iLife '09 Support: http://www.apple.com/support/ilife/
So, perhaps the alleged expert may have omitted something or the other in discussion
of the computer; ideally, the best iBook G4 would be the last edition 1.33/1.42GHz 12/14".
Hopefully this helps a bit.
Good luck & happy computing!
edited. -
Application running too slow on sun T5440 but run normal on sun M3000
Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
Code:
bash-3.00# uname -a
SunOS 5.10 Generic_142909-17 sun4v sparc SUNW,T5440
Psrinfo -pv
Code:
bash-3.00# psrinfo -pv
The physical processor has 64 virtual processors (0-63)
UltraSPARC-T2+ (chipid 0, clock 1414 MHz)
The physical processor has 64 virtual processors (64-127)
UltraSPARC-T2+ (chipid 1, clock 1414 MHz)
The physical processor has 64 virtual processors (128-191)
UltraSPARC-T2+ (chipid 2, clock 1414 MHz)
The physical processor has 64 virtual processors (192-255)
UltraSPARC-T2+ (chipid 3, clock 1414 MHz)
/etc/system
Code:
set semsys:seminfo_semopm=10000
set semsys:seminfo_semmsl=10000
set semsys:seminfo_semmni=1024
set max_nprocs=50000
set msgsys:msginfo_msgmnb=2097152
set msgsys:msginfo_msgmni=2560
set msgsys:msginfo_msgtql=2560
set shmsys:shminfo_shmmax=1073741824
set shmsys:shminfo_shmmni=1000
set rlim_fd_cur=10000
Ipcs
Code:
bash-3.00# ipcs -a
IPC status from as of Wed Jun 13 12:31:01 ICT 2012
T ID KEY MODE OWNER GROUP CREATOR CGROUP CBYTES QNUM QBYTES LSPID LRPID STIME RTIME CTIME
Message Queues:
q 62 0x1388 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 61 0x1387 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 60 0x1318 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 59 0x12a9 --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9071 10:25:38 10:25:38 8:36:22
q 58 0x100f --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9070 10:06:16 10:06:16 8:36:22
q 57 0xfa0 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 9071 9069 10:25:38 10:25:38 8:36:22
q 56 0xf30 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:20
q 55 0xc27 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:28:14
q 54 0xbb8 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 172 9066 10:47:08 10:47:08 8:28:14
T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
Shared Memory:
T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME
Semaphores:
s 104 0x9c4 --ra-ra-ra- topx topx topx topx 3 12:31:00 8:36:20
s 103 0xa8c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 102 0xd48 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 101 0xce4 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 100 0x26de --ra-ra-ra- topx topx topx topx 8 10:19:34 8:28:14
s 99 0xc1c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 98 0xbb8 --ra-ra-ra- topx topx topx topx 1 8:43:50 8:28:14
s 97 0xaf0 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 96 0xa28 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 95 0x7ee --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 94 0x7e4 --ra-ra-ra- topx topx topx topx 1001 8:36:20 8:28:14
s 93 0x7da --ra-ra-ra- topx topx topx topx 220 8:36:20 8:28:14
s 92 0x7d5 --ra-ra-ra- topx topx topx topx 200 12:05:15 8:28:14
s 91 0x7d0 --ra-ra-ra- topx topx topx topx 200 8:56:42 8:28:14
s 90 0xc80 --ra-ra-ra- topx topx topx topx 2 12:31:01 8:27:52 –a
Prstat
Code:
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
9202 topx 1460M 893M sleep 59 0 0:16:37 0.2% integrity_check/1
12455 root 3880K 3600K cpu65 59 0 0:00:00 0.0% prstat/1
9080 topx 142M 130M sleep 59 0 0:00:52 0.0% intf_resp_low/1
9125 topx 102M 78M sleep 59 0 0:00:36 0.0% interface_vsc/1
9121 topx 88M 80M sleep 59 0 0:00:32 0.0% interface_tcu/1
9120 topx 89M 80M sleep 59 0 0:00:29 0.0% interface_rcm/1
9124 topx 87M 78M sleep 59 0 0:00:29 0.0% baplie_merge_v2/1
9122 topx 86M 78M sleep 59 0 0:00:28 0.0% interface_eih/1
9115 topx 88M 77M sleep 59 0 0:00:33 0.0% intf_batch_even/1
9114 topx 88M 77M sleep 59 0 0:00:39 0.0% intf_event/1
9117 topx 87M 78M sleep 59 0 0:00:32 0.0% interface_bxy/1
9118 topx 86M 78M sleep 59 0 0:00:29 0.0% interface_ppm/1
NPROC USERNAME SWAP RSS MEMORY TIME CPU
41 topx 334M 2237M 3.4% 0:30:17 0.3%
43 root 186M 195M 0.3% 0:14:45 0.0%
1 noaccess 152M 136M 0.2% 0:04:00 0.0%
1 smmsp 3688K 11M 0.0% 0:00:04 0.0%
1 lp 1208K 3880K 0.0% 0:00:00 0.0%
6 daemon 7264K 9944K 0.0% 0:00:26 0.0%
Total: 93 processes, 259 lwps, load averages: 0.40, 0.39, 0.39
Prstat –mL
Code:
bash-3.00# prstat -mL
PID USERNAME USR SYS TRP TFL DFL LCK SLP LAT VCX ICX SCL SIG PROCESS/LWPID
9202 topx 0.9 0.0 0.0 0.0 0.0 0.0 99 0.0 2 0 5 0 integrity_ch/1
9080 topx 0.4 0.0 0.0 0.0 0.0 0.0 100 0.0 5 0 20 0 intf_resp_lo/1
9114 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 13 0 66 0 intf_event/1
17282 root 0.1 0.2 0.0 0.0 0.0 0.0 100 0.0 20 1 324 0 prstat/1
9117 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_bx/1
9118 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_pp/1
9115 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 15 0 80 0 intf_batch_e/1
9121 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_tc/1
9125 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9120 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_rc/1
9123 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9124 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 baplie_merge/1
9122 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_ei/1
9119 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_cp/1
9204 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 15 1 1K 0 sys_check/1
259 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 13 2 98 7 in.mpathd/1
1 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 3 0 99 3 init/1
1337 noaccess 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 100 0 100 0 java/14
140 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 19 0 114 0 nscd/851
Total: 90 processes, 256 lwps, load averages: 0.40, 0.40, 0.39
Vmstat
Code:
bash-3.00# vmstat 1 10
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr m0 m1 m2 m3 in sy cs us sy id
0 0 0 87720712 60562856 173 645 199 44 44 0 0 0 0 0 0 886 2819 525 0 1 99
1 0 0 87563976 59743040 73 327 0 15 15 0 0 0 0 0 0 747 2831 439 0 1 99
0 0 0 87563656 59742808 61 306 0 15 15 0 0 0 0 0 0 770 2684 427 0 1 99
1 0 0 87563656 59742824 0 0 0 0 0 0 0 0 0 0 0 886 1302 525 0 1 99
1 0 0 87563656 59742816 62 305 0 15 15 0 0 0 0 0 0 722 2652 420 3 1 96
1 0 0 87563656 59742840 554 2777 0 139 139 0 0 0 0 0 0 959 9736 749 1 1 97
0 0 0 87563456 59742672 1155 5735 0 292 292 0 0 0 0 0 0 1113 17489 1145 1 3 96
1 0 0 87563656 59742840 0 0 0 0 0 0 0 0 0 0 0 845 1613 654 0 1 99
0 0 0 87563656 59742856 62 305 0 15 15 0 0 0 0 0 0 900 2647 526 0 1 99
0 0 0 87563656 59742856 62 304 0 15 15 0 0 0 0 0 0 683 2661 396 0 1 99
Mpstat
Code:
CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl
0 0 0 130 261 1 121 0 13 1 0 0 0 1 0 99
1 0 0 35 133 2 143 0 9 6 0 64 0 0 0 100
2 0 0 5 20 2 17 0 3 0 0 29 1 0 0 99
3 0 0 0 3 0 2 0 0 0 0 0 0 0 0 100
4 0 0 3 14 0 15 0 2 2 0 13 0 0 0 100
73 0 0 474330 77 3 0 7 0 2 0 2596 67 33 0 0
73 0 0 487701 37 0 0 7 0 8 0 2670 66 34 0 0
73 0 0 476377 14 0 0 8 0 1 0 2610 66 34 0 0
78 0 0 473950 11 1 0 7 0 13 0 2593 67 33 0 0
78 0 0 480562 9 0 0 7 0 4 0 2630 66 34 0 0
79 0 0 320989 14 1 0 8 0 0 0 1766 77 23 0 0
79 0 0 479148 9 0 0 7 0 8 0 2622 66 34 0 0
79 0 0 479426 13 0 0 7 0 2 0 2622 67 33 0 0
79 0 0 488949 9 0 0 8 0 13 0 2678 66 34 0 0
64 0 0 482229 15 2 0 8 0 7 0 2638 65 35 0 0
77 0 0 475571 14 1 0 7 0 8 0 2602 67 33 0 0
69 0 0 467795 22 1 0 7 0 40 0 2563 66 34 0 0
69 0 0 318623 9 1 0 7 0 8 0 1751 77 23 0 0
66 0 0 465179 92 1 2 8 0 62 0 2545 66 34 0 0
When my application running, some of CPU have IDLE state = 0 and hold the CPU while another CPU have IDLE state 100. I think this is my bottleneck but I cannot find any solution for solve that.
Netstat
Code:
bash-3.00# netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 244022 0 244022 0 0 0
nxge0 1500 TOPX-01-DUMMY1 TOPX-01-DUMMY1 3594863 0 5801650 0 0 0
nxge1 1500 TOPX-01-DUMMY2 TOPX-01-DUMMY2 160954 0 151230 0 0 0
iostat
Code:
bash-3.00# iostat -xn
extended device statistics
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device
0.1 0.1 1.5 30.8 0.0 0.0 1.8 9.0 0 0 md/d0
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.9 0 0 md/d1
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.8 0 0 md/d2
0.0 0.0 0.0 0.0 0.0 0.0 0.0 15.2 0 0 md/d3
0.0 0.0 0.0 0.0 0.0 0.0 0.0 10.9 0 0 md/d4
0.0 0.0 0.0 0.0 0.0 0.0 0.0 19.4 0 0 md/d5
0.0 0.0 2.2 1.5 0.0 0.0 0.8 7.4 0 0 md/d6
0.0 0.0 1.1 0.7 0.0 0.0 0.0 8.5 0 0 md/d7
0.0 0.0 1.1 0.8 0.0 0.0 0.0 8.2 0 0 md/d8
0.0 0.1 0.4 0.6 0.0 0.0 7.6 10.0 0 0 md/d9
0.0 0.1 0.2 0.6 0.0 0.0 0.0 9.1 0 0 md/d10
0.0 0.1 0.2 0.6 0.0 0.0 0.0 7.8 0 0 md/d11
0.0 0.0 0.0 0.0 0.0 0.0 0.1 10.4 0 0 md/d12
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.5 0 0 md/d13
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.4 0 0 md/d14
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.9 0 0 c0t0d0
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.8 0 0 c0t1d0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 c1t0d0
0.9 0.9 125.3 123.1 0.0 0.1 0.0 34.2 0 2 c4t600144F0CC00C29A00004D1E456F0003d0
0.3 0.7 20.7 53.9 0.0 0.0 0.2 8.2 0 0 c4t600144F0CC00C29A00004D1E43880001d0
0.1 0.2 50.7 111.5 0.0 0.0 0.0 59.1 0 1 c4t600144F0CC00C29A00004D1E453E0002d0
Please help me find the bottleneck of my T5440 server?Thanks so much for all your help.Moderator Comment and Action:
@ O.P.,
You cross-posted this to at least two other forum web sites:
http://www.linuxquestions.org/questions/solaris-opensolaris-20/application-running-too-slow-on-sun-sparc-t5440-but-run-normal-on-sun-m3000-4175411155/
http://www.unix.com/solaris/189945-application-running-too-slow-sun-sparc-t5440-but-run-normal-sun-m3000.html
... and didn't think that was important enough to simply mention the fact.
Timestamps suggest that OTN was the last place you posted to.
Poor forum etiquette.
Why would anyone spend the time to try to give help that you have already received elsewhere? That's a waste of their time.
(Yes, you already received the suggestion to use Dtrace in one of those other sites.)
This thread is locked as irrelevant. -
Java web start application runs too slow...
Hello,
I am new to Java Web Start. I have created a java web start application and when i enable web start from local Execution, then it works perfectly well. But when i upload it on server and then download the application, then it is too too slow...i mean it takes minutes to get the output on clicking some button....my jnlp file is as under:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<jnlp codebase="http://(web server code base)" href="launch.jnlp" spec="1.0+">
<information>
<title>ERD</title>
<vendor>Deepika Gohil</vendor>
<homepage href="http://appframework.dev.java.net"/>
<description>A simple java desktop application based on Swing Application Framework</description>
<description kind="short">ER Deign Tools</description>
</information>
<update check="always"/>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+"/>
<jar href="ERD_1_2.jar" main="true"/>
<jar href="lib/appframework-1.0.3.jar"/>
<jar href="lib/swing-worker-1.1.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/jaxb1-impl.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
<jar href="lib/ant-contrib-1.0b3.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/FastInfoset.jar"/>
<jar href="lib/gmbal-api-only.jar"/>
<jar href="lib/http.jar"/>
<jar href="lib/jaxws-rt.jar"/>
<jar href="lib/jaxws-tools.jar"/>
<jar href="lib/management-api.jar"/>
<jar href="lib/mimepull.jar"/>
<jar href="lib/policy.jar"/>
<jar href="lib/saaj-impl.jar"/>
<jar href="lib/stax-ex.jar"/>
<jar href="lib/streambuffer.jar"/>
<jar href="lib/woodstox.jar"/>
<jar href="lib/jaxws-api.jar"/>
<jar href="lib/jsr181-api.jar"/>
<jar href="lib/jsr250-api.jar"/>
<jar href="lib/saaj-api.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
</resources>
<application-desc main-class="erd.screen1">
</application-desc>
</jnlp>
I dont understand the reason. Could you please help me out.
Thank you,
Deepika Gohil.Check your web server's access logs to see how many requests web start is sending for each jar. After you've loaded the application the first time, for each subsequent launch, if you've got everything configured right, you should only see requests for the JNLP file and maybe some gifs because web start should load everything else out of the cache (if you're using the version-based download protocol). Or if you're using the basic download protocol, then you might see requests for each jar file, but even in this case, if your web server is prepared to evaluate the last-updated attribute for each jar request and for jars that have not changed, respond with no actual payload and a header value of Not-Modified, then that should run almost as fast.
You might also want to consider changing the "check" attribute of the "update" element from "always" to "background" for a couple of reasons. It should allow your app to start sooner (but this means that you might have to launch once or twice after an update is applied to the web server before the update shows up on the workstation). Also, my impression is that "always" is broken and prevents web start from ever checking to see if your jnlp file has been updated if you launch your app from a web start shortcut - launching from a browser is less likely to have this problem, depending on how often your browser is configured to check for updated resources. -
Please Help! All Sounds in Classic are too slow now!
Something dreadful happened (wish I knew what) and now every sound that is played back by any Classic application is about 70% too slow.
No matter if it is a Classic game like Unreal (I), Deus Ex, AvP for OS9 (the OSX version works fine), or Quicktime 6, or any other given Classic application. The only sounds that appear normal are the Platinum system sounds.
I don't know which files affect Classic sound playback or where they are located. Can't imagine what could cause that particular problem.
Hope someone could help...
Many thanks in advance
M:A:
PowerMac G5 2x2 GHz Mac OS X (10.4.6) 1.5 GB RAM, standard sound card (TI-TAS3004)
PowerMac G5 2x2Sorry, didnt get an email notification, so I just checked the thread.
Starting and quitting Garage Band actually helped!
(Imagine listening to the meaningful dialogues in "Deus Ex" spoken with Sesame Street's Cookie Monster voice. Aaaaannnd reeealllly sllloowwww. Doesn't quite capture the mood...)
Do you have an explanation why Garage Band should affect Classic sound output?
Thanks a lot,
Martin -
New iMac running 10.10.1 frequently pauses, way too slow
I recently bought a 27 inch iMac, installed Yosemite, and migrated my files by time machine from a 5 year old macbook Pro running Snow Leopard. Since updating to 10.10.1, I frequently get the spinning beachball while I wait to continue, and everything seems much slower than it should. Safari downloads take forever, compared to Firefox. I ran an EtreCheck report pasted below. I tried some easy fixes like removing desktop clutter, reducing transparency, but that doesn't affect the overall slowness. Any solutions welcome!
Problem description:
Installed Yosemite on new iMac, migrating from snow leopard on an older macbook pro. Instead of being fast, processes frequently pause for bit while the beachball spins, then resume. Way too slow, much slower than my old macbook pro.
EtreCheck version: 2.0.11 (98)
Report generated November 24, 2014 at 5:06:30 PM EST
Hardware Information: ℹ️
iMac (27-inch, Late 2013) (Verified)
iMac - model: iMac14,2
1 3.2 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
NVIDIA GeForce GT 755M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2:7:57
Disk Information: ℹ️
APPLE HDD ST1000DM003 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (749.24 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Western Digital Ext HDD 1021 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Time Machine New (disk2s2) /Volumes/Time Machine New : 2.00 TB (193.57 GB free)
Seagate Expansion Desk 2 TB
S.M.A.R.T. Status: Verified
NewArchive (disk3s1) /Volumes/ NewArchive : 2.00 TB (11.39 GB free)
Western Digital Ext HDD 1021 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Bootable Backup New (disk1s2) /Volumes/Bootable Backup New : 500.10 GB (254.99 GB free)
Storage New (disk1s3) /Volumes/Storage New : 499.62 GB (480.72 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[not loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) Support
[not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) Support
[loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) Support
[not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d13) Support
[not loaded] com.fklt.driver (1.8.0) Support
[not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.1) Support
[not loaded] com.novatelwireless.driver.3G (2.2.8) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
[not loaded] com.rogueamoeba.InstantOn (6.0.3 - SDK 10.6) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) Support
/System/Library/Extensions/InstantOn.kext/Contents/PlugIns
[not loaded] com.rogueamoeba.InstantOnCore (6.0.3 - SDK 10.6) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
/Volumes/Bootable Backup New/Applications/ CD burn & label ƒ/Toast 8.0.5 Titanium ƒ/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (1.7) Support
/Volumes/Bootable Backup New/Applications/ Multimedia ƒ/TuneClone ƒ/TuneClone.app
[not loaded] com.tuneclone.driver.TuneClone_Virtual_CDWriter (1.0.0d1) Support
/Volumes/Bootable Backup New/Applications/ My Utilities ƒ/Little Snitch 2.2 ƒ/Little Snitch Installer.app
[not loaded] at.obdev.nke.LittleSnitch (2.2.05) Support
/Volumes/Bootable Backup New/Applications/Cloak.app
[not loaded] com.bourgeoisbits.cloak.tun (1.0.1) Support
/Volumes/Bootable Backup New/Applications/Utilities/DiskWarrior ƒ/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.2) Support
Startup Items: ℹ️
NoteburnerService: Path: /System/Library/StartupItems/NoteburnerService
M-Audio FireWire Audio Helper: Path: /Library/StartupItems/M-Audio FireWire Audio Helper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[loaded] com.avira.antivirus.general.agent.plist Support
[loaded] com.avira.antivirus.ipm.ui.plist Support
[failed] com.avira.antivirus.notifications.agent.plist Support
[loaded] com.avira.antivirus.odscan.default.plist Support
[loaded] com.avira.antivirus.scheduler.agent.plist Support
[running] com.avira.antivirus.systray.plist Support
[loaded] com.avira.antivirus.telemetry.agent.plist Support
[loaded] com.avira.antivirus.update.default.plist Support
[running] com.flipvideo.FlipShare.AutoRun.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[loaded] com.smithmicro.cleaning.quickbackupcheck.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.atomicbird.macaroni.launchd.plist Support
[failed] com.avira.antivirus.dbcleaner.plist Support
[loaded] com.avira.antivirus.ipm.loader.plist Support
[running] com.avira.helper.watchdox.plist Support
[loaded] com.barebones.bbedit.plist Support
[loaded] com.bombich.ccc.plist Support
[invalid?] com.bombich.ccc.scheduledtask.EE7EE552-88D4-41A7-BB96-B7F2F891EA0D.plist Support
[running] com.bombich.ccchelper.plist Support
[running] com.flipvideo.FlipShareServer.launchd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.m-audio.firewire.helper.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.sibelius.sari.plist Support
[invalid?] com.sierrawireless.SierraReset.plist Support
[running] com.sierrawireless.SWoCMon.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.bombich.ccc-user-agent.plist Support
[running] com.c-command.SpamSieve.LaunchAgent.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.spotify.webhelper.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
GrowlMenu Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlMenu.app)
Dropbox Application (/Applications/Dropbox ƒ/Dropbox.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Scorch: Version: (null) - SDK 10.2 Support
SpeedDownload Browser Plugin: Version: 2.1.5 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Myriad Music Plugin: Version: 5.6.2 Support
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.5.0r596 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
DivXBrowserPlugin: Version: 2.1 Support
CouponPrinter-FireFox: Version: Version 1.1.5
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
OVSHelper: Version: 1.1 Support
Google Earth Web Plug-in: Version: 7.1 Support
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
OfficeLiveBrowserPlugin: Version: 12.2.7 Support
Safari Extensions: ℹ️
Videobox
DivX Plus Web Player HTML5 <video>
PriceBlink-1
Speed Download
Add To Amazon Wish List
Exposer
Discount Search for Amazon
StumbleUpon
WOT-1
1Password
YouTube Downloader
Rotten Tomatoes
Compass
3rd Party Preference Panes: ℹ️
3ivx MPEG-4 Support
A Better Finder Preferences Support
RCDefaultApp
DivX Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
PreferencesPane Support
Macaroni Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 250.11 GB
Destinations:
Time Machine New [Local]
Total size: 2.00 TB
Total number of backups: 33
Oldest backup: 2014-11-13 07:38:50 +0000
Last backup: 2014-11-24 21:19:47 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 250.11 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% avlogwriter
1% loginwindow
1% avguard-ondemand-mgmt
0% fontd
Top Processes by Memory: ℹ️
601 MB savapi
352 MB mds_stores
309 MB avguard.bin
301 MB loginwindow
206 MB Mail
Virtual Memory Information: ℹ️
2.80 GB Free RAM
3.83 GB Active RAM
978 MB Inactive RAM
974 MB Wired RAM
5.87 GB Page-ins
0 B Page-outsStart time: 10:22:44 01/10/15
Model Identifier: iMac11,1
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 20:24
SATA
Hitachi HDS722020ALA330
USB
Hub (NEC Corporation)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
My Book 1110 (Western Digital Technologies, Inc.)
Backup+ Desk (Seagate LLC)
Hub (NEC Corporation)
Backup+ Desk (Seagate LLC)
My Book 1110 (Western Digital Technologies, Inc.)
Backup+ Desk (Seagate LLC)
hp LaserJet 3380 (Hewlett Packard)
Officejet Pro 8600 (Hewlett Packard)
Diagnostic reports
2014-12-19 DashlaneAgent crash
2014-12-21 QuickLookSatellite crash
2014-12-22 DashlaneAgent crash
2014-12-27 DashlaneAgent crash
2014-12-28 HelpViewer crash
2014-12-30 DashlaneAgent crash
2015-01-05 Microsoft Word hang
Log
Jan 10 10:19:18 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:28 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:38 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:48 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:23:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:23:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Memory: kernel_task (UID 0) is using 1332 MB
kexts
com.seagate.driver.PowSecDriverCore (5.2.6)
com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6)
com.vmware.kext.vmci (90.5.7)
com.vmware.kext.vsockets (90.5.7)
com.vmware.kext.vmnet (0188.79.83)
com.vmware.kext.vmx86 (0188.79.83)
com.vmware.kext.vmioplug.12.1.17 (12.1.17)
Daemons
com.carbonite.daemon
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.oracle.java.Helper-Tool
com.apple.aelwriter
com.adobe.fpsaud
com.bombich.ccchelper
com.seagate.TBDecorator.plist
com.bombich.ccc
Agents
com.sony.PMBPortable.AutoRun
com.bombich.ccc-user-agent
com.google.Chrome.framework.service_process/Users/USER/Library/Application_Supp ort/Google/Chrome
com.leadertech.PowerRegister.SEA1.UUID
com.adobe.AdobeCreativeCloud
com.carbonite.carbonitestatus
com.adobe.PDApp.AAMUpdatesNotifier.96592.UUID
com.apple.MassStorageCamera.315272.UUID
com.adobe.ARM.UUID
com.bombich.cccuseragent
com.seagate.dashboard
com.adobe.CS5ServiceManager
com.oracle.java.Java-Updater
com.citrixonline.GoToMeeting.G2MUpdate
com.adobe.ARM.UUID
com.google.keystone.user.agent
com.apple.AirPortBaseStationAgent
com.hp.scanModule3.64216.UUID
com.carbonite.carbonitealerts
Startup items
/Library/StartupItems/HP IO/HP IO
/Library/StartupItems/HP IO/StartupParameters.plist
/Library/StartupItems/HP USB EWS Gateway/HP USB EWS Gateway
/Library/StartupItems/HP USB EWS Gateway/StartupParameters.plist
/Library/StartupItems/HPlaserjet Trap Monitor/HPlaserjet Trap Monitor
/Library/StartupItems/HPlaserjet Trap Monitor/StartupParameters.plist
/Library/StartupItems/VirtualBox/StartupParameters.plist
/Library/StartupItems/VirtualBox/VirtualBox
Bundles
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/MicrosoftMouse.kext
- com.microsoft.driver.MicrosoftMouse
/System/Library/Extensions/Seagate Storage Driver.kext
- com.seagate.driver.PowSecDriverCore
/Library/Extensions/VBoxDrv.kext
- org.virtualbox.kext.VBoxDrv
/Library/Extensions/VBoxNetAdp.kext
- org.virtualbox.kext.VBoxNetAdp
/Library/Extensions/VBoxNetFlt.kext
- org.virtualbox.kext.VBoxNetFlt
/Library/Extensions/VBoxUSB.kext
- org.virtualbox.kext.VBoxUSB
/Library/Internet Plug-Ins/AdobeAAMDetect.plugin
- com.AdobeAAMDetectLib.AdobeAAMDetect
/Library/Internet Plug-Ins/AdobeExManDetect.plugin
- com.AdobeExManDetectLib.AdobeExManDetect
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
- com.adobe.acrobat.pdfviewer
/Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
- com.adobe.acrobat.pdfviewerNPAPI
/Library/Internet Plug-Ins/EPPEX Plugin.plugin
- N/A
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/PreferencePanes/Carbonite.prefPane
- com.carbonite.prefpanel
/Library/PreferencePanes/DashboardPreferences.prefPane
- com.seagate.dashboard.preferences
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/Growl.prefPane
- com.growl.prefpanel
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/Microsoft Mouse.prefPane
- com.microsoft.microsoftmouse
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Caches/com.apple.Safari/Extensions/Dashlane-2.safariextension
- com.dashlane.dashlanesafari
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/Dashlane.plugin
- com.DashlaneLib.Dashlane
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
Library/Widgets/HP Ink Widget.wdgt
- com.hp.widget.inkwidget
Apps
/Volumes/iMac27 Desktop Clone/Applications/Google Drive.app
/Volumes/iMac27 Desktop Clone/Applications/Google Drive 2.app
/Applications/Google Drive.app
/Applications/Google Drive 2.app
Contents of /System/Library/LaunchDaemons/com.seagate.TBDecorator.plist (checksum 3070240373)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<!--
com.seagate.TBDecorator.plist
SeagateDiagnostics
Created by John Brisbin on 3/10/10.
Copyright 2010 Seagate Technologies LLC.. All rights reserved.
-->
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.seagate.TBDecorator.plist</string>
<key>RunAtLoad</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Seagate/TBLoopDriveParams</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitealerts.plist (checksum 3096452879)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitealerts</string>
<key>OnDemand</key>
<true/>
<key>RunAtLoad</key>
<false/>
<key>WatchPaths</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/Resources/</string>
</array>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/MacOS/CarboniteAlerts</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitestatus.plist (checksum 2411194237)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitestatus</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteStatus.app/Contents/MacOS/CarboniteStatus</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 1821332316)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>16</integer>
<key>Minute</key>
<integer>33</integer>
<key>Weekday</key>
<integer>4</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.sony.PMBPortable.AutoRun.plist (checksum 2288250257)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.sony.PMBPortable.AutoRun</string>
<key>OnDemand</key>
<true/>
<key>Program</key>
<string>/Library/Application Support/Sony/PMBPortableAutoRun.app/Contents/MacOS/PMBPortableAutoRun</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer.plist (checksum 2593636600)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.teamviewer</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS/TeamViewer</string>
<string>-RunAsAgent</string>
<string>YES</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS</string>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist (checksum 2362964135)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.desktop</string>
<key>LimitLoadToSessionType</key>
<array>
<string>LoginWindow</string>
<string>Aqua</string>
</array>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Desktop</string>
<string>-RunAsAgent</string>
<string>YES</string>
<string>-Module</string>
<string>Full</string>
</array>
...and 6 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.plist (checksum 3730953884)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.bombich.ccc</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccc</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1847580806)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Media Disk" to "Music". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 229 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1637450734)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Pictures" to "Pictures Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 207 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1138618051)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Aperture Library" to "Aperture Library Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 233 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 3444763627)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "MacHD" to "iMac27 Desktop Clone". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be permanently deleted.
• Files on the destination will be updated if the size or modification date differs.
• Older versions of updated files will not be archived.
</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 209 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist (checksum 495358405)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.bombich.ccchelper</string>
<key>MachServices</key>
<dict>
<key>com.bombich.ccchelper</key>
<true/>
</dict>
<key>Program</key>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.carbonite.launchd.carbonitedaemon.plist (checksum 2948711974)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.carbonite.daemon</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteDaemon.app/Contents/MacOS/CarboniteDaemon</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
<key>WorkingDirectory</key>
<string>/Library/Application Support/Carbonite</string>
<key>StandardOutPath</key>
<string>/Library/Logs/Carbonite1.log</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/Carbonite2.log</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.teamviewer.teamviewer_service.plist (checksum 13465011)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.service</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Service</string>
<string>-Module</string>
<string>Full</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 578238223)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 926752576)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.bombich.ccc-user-agent.plist (checksum 1605626007)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc-user-agent</string>
<key>Program</key>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/CCC User Agent.app/Contents/MacOS/CCC User Agent</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/CCC.log</string>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/CCC.log</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.google.Chrome.framework.plist (checksum 2813695882)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>Label</key>
<string>com.google.Chrome.framework.service_process/Users/USER/Library/Applicat ion_Support/Google/Chrome</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Program</key>
<string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
<string>--type=service</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>Sockets</key>
<dict>
<key>ServiceProcessSocket</key>
...and 7 more line(s)
Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 4195197102)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.user.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.leadertech.PowerRegister.SEA1.UUID.plist (checksum 2799483814)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.leadertech.PowerRegister.SEA1.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Seagate Dashboard.app/Contents/Resources/Seagate.app/Contents/Resources/SeagateRegRemin der.app/Contents/MacOS/SeagateRegReminder</string>
</array>
<key>StartInterval</key>
<integer>3600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.seagate.dashboard.plist (checksum 1981328959)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.seagate.dashboard</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Seagate Dashboard.app/Contents/MacOS/Seagate Dashboard</string>
<string>-runMode</string>
<string>autoLaunched</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist (checksum 3654809970)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>org.virtualbox.vboxwebsvc</string>
<key>Program</key>
<string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>
<key>Sockets</key>
<dict>
<key>Listeners</key>
<dict>
<key>SockServiceName</key>
<string>18083</string>
<key>SockType</key>
<string>stream</string>
<key>SockFamily</key>
<string>IPv4</string>
</dict>
</dict>
</dict>
...and 1 more line(s)
Global login items
/Applications/HP LaserJet Software/HP Setup Assistant.app
/Library/Application Support/hp/laserjet/Trap Monitor/HPEventHandler.app
Firewall: On
DNS: 216.40.77.126
Listeners
cupsd: ipp
kdc: kerberos
launchd: afpovertcp
launchd: microsoft-ds
User login items
iTunesHelper
- /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
VMware Fusion Start Menu
- /Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app
Google Drive
- /Applications/Google Drive.app
Canon IJ Network Scanner Selector2
- /Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app
Android File Transfer Agent
- /Users/USER/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app
AdobeResourceSynchronizer
- /Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app
Eye-Fi Helper
- /Applications/Eye-Fi/Eye-Fi Helper.app
Google Chrome
- /Applications/Google Chrome.app
Launch Nikon Message Center 2
- /Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app
Safari extensions
Dashlane
Restricted files: 513
Lockfiles: 4
High file counts
Desktop: 125
Elapsed time (s): 584 -
I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?
Hello HanaAmer1,
We've an article which provides troubleshooting steps that can help get AirPlay workign correctly.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Cheers,
Allen -
No Audio Playback due to Error Message "Disk is too slow. (Prepare) (-10001)"
Out of the blue, no audio playback. Was working just fine earlier today.
I repeatedly get the error message:
Disk is too slow. (Prepare)
(-10001)
NOTE: I have more than enough disc space. That is NOT the issue.
I also just got a second error message:
Part of the Project was not played
This project has too many real instrument tracks to be played in real-time. To optimize performance, see the 'Optimizing GarageBand performance' page in GarageBand Help.
NOTE: Odd as I have only 2 tracks in the GarageBand file.
Any others experience this? Suggestions?Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
You'll have to setup the program again.
cheers
rob -
Built In application "YouTube" Is Way too slow!
Hey guys, I'm new here btw, so hi to all.
When i watch videos on youtube built in app IT TAKES FOREVER! to buffer the videos, I'm using WI-FI and my net connection is 20mb, I would love to use it but it just takes toooooo long to buffer it would take me 4-5 minute to watch a one minute clip, Any help you'll be my new idol!
The strange this is though, on my computer they load in literally seconds if not instantly are are completely buffered in under 5 seconds for almost any video, yet i could hardly watch a 2 minute youtube video, it buffers then 20 seconds later it stops and it won't supering buffer, i press play nothing happens, it just like it either WAYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY too slow or it stops buffering completely, all i know is with youtube being such a big feature, it is almost useless by the terrible coding, or what ever the problem is to make it soo slow, i hear so much people talking about youtube and there iphone but mine is just too painfully slow to watch(and no 100% not my connection)Is there any youtube settings??? Can any setting be changed which relate to youtube? And is it possible to watch youtube through safari and not through the standard application?
NO, there are no settings. Flash will not play in Safari yet, but there is a workaround using VideoHamster.
Here are a couple of Flash YouTube videos on my server that I converted to QT with CosmoPod. How do they load for you? I have a 1M up cable connection. They should start loading and playing after a few seconds. YouTube videos start playing after about 5 seconds on mine.
http://bmer.servemp3.com/test/
Dave M.
MacOSG Founder/Ambassador An Apple User Group iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch) -
Select Data from aufm too slow
Hi experts,
I have a query in my report but its performance too slow.
is there any proper way or any way to improve the performance of below query.
SELECT * FROM aufm into table i_aufm " collecting input material document numbers
WHERE mblnr GE '4900000000'
AND mjahr GE '2008'
AND zeile GT '0'
AND matnr EQ matnr_101-matnr
AND werks IN p_werks
AND charg EQ matnr_101-charg
AND bwart = '101'.Hi,
1 .Dont use * from any table.
2. Create a internal table that u want to retrieve the data from that table. (Structure).
Eg:
types : begin of str_ekko,
ebeln type ekko-ebeln,
bsart type ekko-bsart,
aedat type ekko-aedat,
endof str_ekko.
data : itab type table of str_ekko,
wa_itab type str_ekko.
In the above u want to take care that while creating the structure u want to look the sequence of fields in the table. in the same sequence u want to create the structure.
3 . The Select-options fields also wants be in the same field sequence of the table.
eg : select ebeln bsart aedat from ekko into table itab where ebeln in so_ebeln and
bsart in so_bsart and
aedat in so_aedat.
4. If the above things are not working just look the indexes of that table. Just create a secondary index with ur requirement. -
Bumblebee performance is too slow
Hi everyone,
This is my second post in this forum and it has been only 2 days that I met Arch. Before, I was using Ubuntu for 3 years, but due to low performance in my PC, unfortunately, I decided to say good bye which was hard to say.
Now, I am trying to have the same setup as my previous laptop and Bumblebee was one of them. I followed the instructions here: https://wiki.archlinux.org/index.php/Bumblebee.
It seems that bumblebee is installed and working, however, the FPS is too slow:
$ optirun glxspheres64 -info
Polygons in scene: 62464
Visual ID of window: 0x20
Context is Direct
OpenGL Renderer: GeForce GT 520MX/PCIe/SSE2
0.023848 frames/sec - 0.021114 Mpixels/sec
Without optirun I get:
$ glxspheres64 -info
Polygons in scene: 62464
Visual ID of window: 0x20
Context is Direct
OpenGL Renderer: Mesa DRI Intel(R) Sandybridge Mobile
0.033237 frames/sec - 0.029426 Mpixels/sec
0.029968 frames/sec - 0.026533 Mpixels/sec
This is impossible as I was getting very good results before.
I am wondering if I did something wrong, or missed anything.
Just for information, system specs:
Intel i7 2670QM 2.2 GHZ
4 GB RAM
1 GB GeForce GT 520MX
512 MB Intel Graphics
I played 0ad with and without optirun and the performance was good in both of them, but not sure if it switches the video cards itself.
I also have bbswitch installed.
Any help would be appreciated. Thank you.
Last edited by wakeup12 (2014-09-27 14:29:19)Hello,
Can you please explain in a little more detail the scenario you testing? Are you comparing a SQL Database in Europe against a SQL Database in India? Or a SQL Database with a local, on-premise SQL Server installation?
In case of the first scenario, the roundtrip latency for the connection to the datacenter might play a role.
If you are comparing to a local installation, please note that you might be running against completely different hardware specifications and without network delay, resulting in very different results.
In both cases you can use the below blog post to assess the resource utilization of the SQL Database during the operation:
http://azure.microsoft.com/blog/2014/09/11/azure-sql-database-introduces-new-near-real-time-performance-metrics/
If the DB utilizes up to 100% you might have to consider to upgrade to a higher performance level to achieve the throughput you are looking for.
Thanks,
Jan
Maybe you are looking for
-
URGENT:Eventing between two iviews in one page
Hi all, I have developed a model in visual composer which contains two iviews in a single page .The first iview contains the input fields and the data service.The second iview contains the output form.I should get the output in the second iview when
-
Bluetooth connection - Keeps connecting / disconnecting in car.
Hi, I've recently got a Z2 phone and i love it all apart from when I get in my car. It connects, disconnect, connects, disconnnect, and so on and so on for as long as Im driving. I've done all I can think of. Reset the phone, unpair the devices etc.
-
Regarding message level authentication in WSDL
Hi, We developed scenario like below. There is a consumer webservice interface which we developed through proxy class. When we created the binding, selected 'Message level authentication' with 'Username and password' option. But in the XML I couldn't
-
Buttons are swapped in InDesign CS6 for Mac
Has anyone else noticed that the "OK" and "Cancel" buttons are swapped in the "Options" dialog box for placing a linked graphic in InDesign CS6? It probably seems like a minor thing but when you use the "Show Options" feature a lot when placing a gra
-
Dear All, I am doing a script for taking a cold backup of instance. 1. stopping application 2. checking the FNDLIBR processes for shuting down after given a 600sec sleep time. 3. stop the database. 4. take a backup. 5. start the database 6. start the