Ibook G4 Turned off and I can't get it to turn back on
My Ibook G4 turned off while I was listening to music and won't go back on. It was plugged into the wall and the battery is charged. Help me!
Hi, and welcome to Apple Discussions.
Check out Apple's Knowledge Base article on troubleshooting portables that won't turn on or start up.
Maybe something there will help.
Similar Messages
-
All of a sudden my IPhone (3G, I think) "turned off" and won't power back up. I know it's not the battery, but I have it plugged in anyway. Any suggestions?
Hold down the power and home buttons at the same time for 15-20 seconds. You should see the Apple logo and it should re-boot.
-
My iphone 4 has gone off and won't come back on, the battery was full but don't want to restore if i don't need to.
any ideas
LTry resetting the phone: Press both the home and sleep/wake buttons until the Apple logo appears (~10 - 15 seconds)>
-
The air port on my imac went off and i can not get it to work
my air port on the imac weny off and i can not get it to work now
Apple used to use airport name for everything.. is this the internal wireless card?? Or external airport router?
If it is the internal wireless card, is it still listed in system profile.. and do a hardware test with your original CD.
See http://support.apple.com/kb/ht1509
The problems with Mavericks are very great.. if you upgrade installed anything can happen.. a common feature is the internal wireless card fails to work.
Give details and we can figure it out.
Here is discussion about the same thing as I think has happened to your imac in macbook.
https://discussions.apple.com/thread/5219345?tstart=30 -
Ever since I did the update, my location service is shut off, and I can't get it back on...help?
Hi there,
Did you try the basic steps?
- Restart Device.
- Reset Device.
- Reset All Settings.
Hope it helps, -
My Samsung S4 turned off and I can't get it to turn back on?
I left the room and came back and my phone is off. I can not get it to turn back on. Has anyone else had this issue?
Thank you. Yes, I pulled the battery out and am now headed towards a factory reset.
Sent from my Verizon Wireless 4G LTE smartphone -
My IPAD (original version) is deleting everything over 30 days from my calendar. How can I prevent this and how can I get back the deleted events?
You are most welcome
-
Iphone 4 just turned off and I can't get it on..Does anybody know what to do?
Hi guys,
Today my iPhone 4 just turned off and I seem not to be able to turn it on again.
I tried to reset it and I tried to get into DFU mode as well, but it doesn't work.
My iPhone does not react on anything.
Does anybody know what to do?
Thanks in advance!This is not an accessories question. Please post in the most appropriate sub forum.
-
My iPod isn't working at all. The screen is black and I can't fix it. I've tried charging it, connecting it to the computer, and pushing the buttons. Nothing works. Please help.
Thank you. Yes, I pulled the battery out and am now headed towards a factory reset.
Sent from my Verizon Wireless 4G LTE smartphone -
My iphone shut off and I can't get it back on!
My iphone shut off and won't turn back on, even if connected to the charger. I see other responses have said to hold down the power and home buttons together. Where is the home (or sleep) button? I know where the power button is. Thanks
Flip the Vibrate/Mute switch on and off, does the iPhone Vibrate? If yes, then your iPhone is on and the screen is out. If no vibrate then try the following......
Leave your iPhone connected to the Wall Charger so the Battery can charge, which may be the problem. Then after at least 30 minutes, try to turn on your iPhone. You can push the Top (Power, On/Off, Sleep) button like normal. Or you could just unplug and then replug the charger or USB cable. Connecting iPhone is a way to turn it on. If this does not work you can hold at same time Both the Home button (the button at bottom of front screen) and the Power button (the top, on/off, sleep), hold both for about 15 seconds until the iPhone turns on. Holding both these buttons at same time is called a Reset.
If this does not revive your iPhone you will have to Restore the Firmware in iTunes. Open iTunes, press the Home Button and then connect your iPhone to the computer with the USB cable, keep holding the Home Button until the iTunes screen appears on your iPhone. When iTunes prompts you Restore the Firmware. -
My 4s shut off and I can't get it started
how can I get my 4s to turn on?
You need power for that awesome device iphonescreen! Are you still having difficulties? Have you tried a soft reset by holding down the power and home keys? How about connecting it to the charger or your computer? Let's get to the bottom of this!
Sincerely,
JonathanK_VZW
VZW Support
Follow Us on Twitter@VZWSupport -
My Ipad has gone blank and I can't get anything to come back up on the screen?
My IPad has gone blank. I was checking my mail and it started flashing and then it froze then it went blank. All I have is a screen saver picture. I can use Suri but nothing else. HELP???? I have turned it off and turned it back on still nothing.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
Connect the iPad to a power source to charge the battery just in case. -
my power mac g4 was working fine i hit a key and it shut down and know it has a symble floting around the screen like the firewirs symble and ot wont turn back on how do i fix it
It does sound like the T key is stuck.
One way to test to see if the keyboard is at fault is to disconnect the keyboard, then start up the Mac.
Note - on that model, you can force a shutdown by holding in the power button (the one on the front panel of the machine) for 8 to 10 seconds.
You can also force a restart by pressing the small convex (bulges out slightly) button under the power button on the front panel (it's the one on the left). -
My "select, edit.." some are white out and I can't edit my photos. How can I reset it?
What application?
What exact version of that application?
What exact version of your OS?
~~~~~~~~~~~~~~~~~ ~ ~~~~~~~
Are you by any chance on Photoshop Elements? If so, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Otherwise:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Screen keeps going black and I can't get it to light back up
I just purchased a "pinkberry" and am getting very frustrated with it. It keeps going black and no matter what buttons I push I cannot get it to light back up. I got it yesterday and charged it for about 12 hours so I know it's not that the battery is low.
seems like a hardware problem. Return the device to where you bought it and claim a new one.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:
Maybe you are looking for
-
PGP error in PI 7.4 - BouncyCastle Provider not found
Hi , I am working on PGP encryption in SAP PI7.4 . I have followed below link : PGPEncryption Module: A Simple How to Guide Using PGP in Process Integration But while doing end to end scenario it is givingg error : Exception caught by adapter framewo
-
*News* What do I mean by custom EasyBIOS , Neo2 K8N Platinum 1C3
Update : 2006-04-16 Some menu pics were gone missing I had a philosify when making a custom bios for myself (and others) for the K8N Neo2 that MSI has done right in the way that they set options as hidden . That's a great idea , however some default
-
Connecting ipod touch to belkin 54g
Hi there, I've got this belkin 54g router, and it will not connect to my touch. It connects to my wii, ps3 and other pc's fine. I'm using a WEP key, with mac filtering disabled etc and it still wont work. I lost my network completely today by fiddlin
-
Cisco Agent Desktop stuck in Reserved
Hi guys... we have a UCCE 7.5.7 with CAD 7.5.8... what we have found is that when there is a large volume of inbound calls the CAD gets stuck in Reserved state for 30 seconds before it gets a call... Investigating this i came accross a reference that
-
I am developing a Lightswitch Application and in one of the Entities I have several currency type properties and I would like to add them all up in one calculated property using C#. For instance: I have 3 columns Amount1 Amount2